Add support to provide CBR address from DT to handle broken
SoC/Bootloader that doesn't correctly init it. This permits to use the
RAC flush even in these condition.
To provide a CBR address from DT, the property "brcm,bmips-cbr-reg"
needs to be set in the "cpus" node. On DT init, this property presence
will be checked and will set the bmips_cbr_addr value accordingly. Also
bmips_rac_flush_disable will be set to false as RAC flush can be
correctly supported.
The CBR address from DT will overwrite the cached one and the
one set in the CBR register will be ignored.
Also the DT CBR address is validated on being outside DRAM window.
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
Acked-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
---
arch/mips/bcm47xx/setup.c | 6 +++++-
arch/mips/bcm63xx/setup.c | 6 +++++-
arch/mips/bmips/setup.c | 30 ++++++++++++++++++++++++++++--
3 files changed, 38 insertions(+), 4 deletions(-)
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 2f1ee0560aba..247be207f293 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -46,7 +46,11 @@
#include <bcm47xx.h>
#include <bcm47xx_board.h>
-/* CBR addr doesn't change and we can cache it */
+/*
+ * CBR addr doesn't change and we can cache it.
+ * For broken SoC/Bootloader CBR addr might also be provided via DT
+ * with "brcm,bmips-cbr-reg" in the "cpus" node.
+ */
void __iomem *bmips_cbr_addr __read_mostly;
union bcm47xx_bus bcm47xx_bus;
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
index 16ea8945ae3a..81529084bc75 100644
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
@@ -23,7 +23,11 @@
#include <bcm63xx_io.h>
#include <bcm63xx_gpio.h>
-/* CBR addr doesn't change and we can cache it */
+/*
+ * CBR addr doesn't change and we can cache it.
+ * For broken SoC/Bootloader CBR addr might also be provided via DT
+ * with "brcm,bmips-cbr-reg" in the "cpus" node.
+ */
void __iomem *bmips_cbr_addr __read_mostly;
void bcm63xx_machine_halt(void)
diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c
index 6dd166c3d643..2572fd49a6e9 100644
--- a/arch/mips/bmips/setup.c
+++ b/arch/mips/bmips/setup.c
@@ -34,7 +34,11 @@
#define REG_BCM6328_OTP ((void __iomem *)CKSEG1ADDR(0x1000062c))
#define BCM6328_TP1_DISABLED BIT(9)
-/* CBR addr doesn't change and we can cache it */
+/*
+ * CBR addr doesn't change and we can cache it.
+ * For broken SoC/Bootloader CBR addr might also be provided via DT
+ * with "brcm,bmips-cbr-reg" in the "cpus" node.
+ */
void __iomem *bmips_cbr_addr __read_mostly;
extern bool bmips_rac_flush_disable;
@@ -208,13 +212,35 @@ void __init plat_mem_setup(void)
void __init device_tree_init(void)
{
struct device_node *np;
+ u32 addr;
unflatten_and_copy_device_tree();
/* Disable SMP boot unless both CPUs are listed in DT and !disabled */
np = of_find_node_by_name(NULL, "cpus");
- if (np && of_get_available_child_count(np) <= 1)
+ if (!np)
+ return;
+
+ if (of_get_available_child_count(np) <= 1)
bmips_smp_enabled = 0;
+
+ /* Check if DT provide a CBR address */
+ if (of_property_read_u32(np, "brcm,bmips-cbr-reg", &addr))
+ goto exit;
+
+ /* Make sure CBR address is outside DRAM window */
+ if (addr >= (u32)memblock_start_of_DRAM() &&
+ addr < (u32)memblock_end_of_DRAM()) {
+ WARN(1, "DT CBR %x inside DRAM window. Ignoring DT CBR.\n",
+ addr);
+ goto exit;
+ }
+
+ bmips_cbr_addr = (void __iomem *)addr;
+ /* Since CBR is provided by DT, enable RAC flush */
+ bmips_rac_flush_disable = false;
+
+exit:
of_node_put(np);
}
--
2.45.1
