This series adds basic support for the RTL9302C reference board. Currently the focus is on the CPU block stuff. I hope to get around to the DSA switch driver eventually but this is a small start that lets me boot a mainline kernel on the board I have. I initialiy started with code from openwrt but have paired it down to just the clocksource driver and devicetree. Chris Packham (6): dt-bindings: mips: realtek: Add rtl930x-soc compatible dt-bindings: timer: Add schema for realtek,otto-timer dt-bindings: interrupt-controller: realtek,rtl-intc: Add rtl9300-intc clocksource: realtek: Add timer driver for rtl-otto platforms mips: generic: add fdt fixup for Realtek reference board mips: dts: realtek: Add RTL9302C board .../realtek,rtl-intc.yaml | 1 + .../devicetree/bindings/mips/realtek-rtl.yaml | 2 + .../bindings/timer/realtek,otto-timer.yaml | 54 ++++ arch/mips/boot/dts/realtek/Makefile | 1 + arch/mips/boot/dts/realtek/RTL9302C.dts | 74 +++++ arch/mips/boot/dts/realtek/rtl930x.dtsi | 78 +++++ arch/mips/generic/Makefile | 1 + arch/mips/generic/board-realtek.c | 81 +++++ drivers/clocksource/Kconfig | 11 + drivers/clocksource/Makefile | 1 + drivers/clocksource/timer-rtl-otto.c | 287 ++++++++++++++++++ include/linux/cpuhotplug.h | 1 + 12 files changed, 592 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/realtek,otto-timer.yaml create mode 100644 arch/mips/boot/dts/realtek/RTL9302C.dts create mode 100644 arch/mips/boot/dts/realtek/rtl930x.dtsi create mode 100644 arch/mips/generic/board-realtek.c create mode 100644 drivers/clocksource/timer-rtl-otto.c -- 2.45.2
