On Fri, Jun 21, 2024 at 10:11:24AM +0200, Alexander Dahl wrote: > Am Thu, Jun 20, 2024 at 04:47:41PM +0100 schrieb Conor Dooley: > > On Thu, Jun 20, 2024 at 04:44:40PM +0200, iansdannapel@xxxxxxxxx wrote: > > > From: Ian Dannapel <iansdannapel@xxxxxxxxx> > > > > > > Add device tree binding documentation for configuring Efinix FPGA > > > using serial SPI passive programming mode. > > > > > > Signed-off-by: Ian Dannapel <iansdannapel@xxxxxxxxx> > > > --- > > > .../bindings/fpga/efnx,fpga-passive-spi.yaml | 76 +++++++++++++++++++ > > > 1 file changed, 76 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/fpga/efnx,fpga-passive-spi.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/fpga/efnx,fpga-passive-spi.yaml b/Documentation/devicetree/bindings/fpga/efnx,fpga-passive-spi.yaml > > > new file mode 100644 > > > index 000000000000..855ceb3b89e8 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/fpga/efnx,fpga-passive-spi.yaml > > > @@ -0,0 +1,76 @@ > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/fpga/efnx,fpga-passive-spi.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Efinix SPI FPGA Manager > > > + > > > +description: | > > > + Efinix Trion and Titanium Series FPGAs support a method of loading the > > > + bitstream over what is referred to as "SPI Passive Programming". > > > + Only serial (1x bus width) is supported, setting the programming mode > > > + is not in the scope the this manager and must be done elsewhere. > > > + > > > + References: > > > + - https://www.efinixinc.com/docs/an033-configuring-titanium-fpgas-v2.6.pdf > > > + - https://www.efinixinc.com/docs/an006-configuring-trion-fpgas-v6.0.pdf > > > + > > > +allOf: > > > + - $ref: /schemas/spi/spi-peripheral-props.yaml# > > > + > > > +properties: > > > + compatible: > > > + enum: > > > + - efnx,fpga-spi-passive > > > > Ahh, here is the user. Can you please add specific compatibles for the > > Trion and Titanium series FPGAs? And when you do, make the filename > > match a compatible please. > > > > Additionally, why "efnx" and not "efinix"? > > FWIW, there already is "altr,fpga-passive-serial" for Altera devices. > > Not sure why Altera got this short vendor prefix, but that was 2013 > with commit 5db17a71a526 ("of: add vendor prefix for Altera Corp.") > and we probably never know? I think that was the stock ticker name for Altera. > The method of transferring the configuration data over SPI into the > FPGA is comparable. I would go so far to claim a single driver could > support both device families for passive configuration over SPI. I've > done that in a non-public driver for U-Boot few months ago, and used > "efinix,fpga-passive-serial" as a compatible there. The difference is > basically Altera requiring more GPIOs considered, and Efinix keeping > the SPI clock on for some time after data is already transfered. That'd prob be helpful to comment on the driver patch. I'd still like to see device specific compatibles here for the trion and titanium though. Thanks, Conor.
Attachment:
signature.asc
Description: PGP signature
