On Wed, Jun 19, 2024 at 06:33:05PM +0200, Arnaud POULIQUEN wrote: > Hi, > > On 6/19/24 17:41, Mathieu Poirier wrote: > > Hi, > > > > On Tue, Jun 11, 2024 at 09:39:01AM +0200, Arnaud Pouliquen wrote: > >> Add a remoteproc TEE (Trusted Execution Environment) driver > >> that will be probed by the TEE bus. If the associated Trusted > >> application is supported on secure part this driver offers a client > >> interface to load a firmware in the secure part. > >> This firmware could be authenticated by the secure trusted application. > >> > >> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx> > >> --- > >> update from V > >> - Fix missing "{" in tee_rproc_find_loaded_rsc_table inline definition. > >> > >> update from V5 > >> - make tee_rproc_get_loaded_rsc_table() local and replace this API by > >> tee_rproc_find_loaded_rsc_table() > >> - map and unmap the resource table in tee_rproc_parse_fw to make a cached copy > >> - use the new rproc_pa_to_va() API to map the resource table memory declared in carevout > >> - remove tee_rproc_release_loaded_rsc_table as no more used. > >> --- > >> drivers/remoteproc/Kconfig | 10 + > >> drivers/remoteproc/Makefile | 1 + > >> drivers/remoteproc/tee_remoteproc.c | 451 ++++++++++++++++++++++++++++ > >> include/linux/remoteproc.h | 4 + > >> include/linux/tee_remoteproc.h | 100 ++++++ > >> 5 files changed, 566 insertions(+) > >> create mode 100644 drivers/remoteproc/tee_remoteproc.c > >> create mode 100644 include/linux/tee_remoteproc.h > >> > >> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig > >> index 48845dc8fa85..6c1c07202276 100644 > >> --- a/drivers/remoteproc/Kconfig > >> +++ b/drivers/remoteproc/Kconfig > >> @@ -365,6 +365,16 @@ config XLNX_R5_REMOTEPROC > >> > >> It's safe to say N if not interested in using RPU r5f cores. > >> > >> + > >> +config TEE_REMOTEPROC > >> + tristate "Remoteproc support by a TEE application" > >> + depends on OPTEE > >> + help > >> + Support a remote processor with a TEE application. The Trusted > >> + Execution Context is responsible for loading the trusted firmware > >> + image and managing the remote processor's lifecycle. > >> + This can be either built-in or a loadable module. > >> + > >> endif # REMOTEPROC > >> > >> endmenu > >> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile > >> index 91314a9b43ce..fa8daebce277 100644 > >> --- a/drivers/remoteproc/Makefile > >> +++ b/drivers/remoteproc/Makefile > >> @@ -36,6 +36,7 @@ obj-$(CONFIG_RCAR_REMOTEPROC) += rcar_rproc.o > >> obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o > >> obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o > >> obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o > >> +obj-$(CONFIG_TEE_REMOTEPROC) += tee_remoteproc.o > >> obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o > >> obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o > >> obj-$(CONFIG_XLNX_R5_REMOTEPROC) += xlnx_r5_remoteproc.o > >> diff --git a/drivers/remoteproc/tee_remoteproc.c b/drivers/remoteproc/tee_remoteproc.c > >> new file mode 100644 > >> index 000000000000..9455fd9d0d2d > >> --- /dev/null > >> +++ b/drivers/remoteproc/tee_remoteproc.c > >> @@ -0,0 +1,451 @@ > >> +// SPDX-License-Identifier: GPL-2.0-or-later > >> +/* > >> + * Copyright (C) STMicroelectronics 2024 - All Rights Reserved > >> + * Author: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx> > >> + */ > >> + > >> +#include <linux/firmware.h> > >> +#include <linux/io.h> > >> +#include <linux/module.h> > >> +#include <linux/remoteproc.h> > >> +#include <linux/slab.h> > >> +#include <linux/tee_drv.h> > >> +#include <linux/tee_remoteproc.h> > >> + > >> +#include "remoteproc_internal.h" > >> + > >> +#define MAX_TEE_PARAM_ARRY_MEMBER 4 > >> + > >> +/* > >> + * Authentication of the firmware and load in the remote processor memory > >> + * > >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor > >> + * [in] params[1].memref: buffer containing the image of the buffer > >> + */ > >> +#define TA_RPROC_FW_CMD_LOAD_FW 1 > >> + > >> +/* > >> + * Start the remote processor > >> + * > >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor > >> + */ > >> +#define TA_RPROC_FW_CMD_START_FW 2 > >> + > >> +/* > >> + * Stop the remote processor > >> + * > >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor > >> + */ > >> +#define TA_RPROC_FW_CMD_STOP_FW 3 > >> + > >> +/* > >> + * Return the address of the resource table, or 0 if not found > >> + * No check is done to verify that the address returned is accessible by > >> + * the non secure context. If the resource table is loaded in a protected > >> + * memory the access by the non secure context will lead to a data abort. > >> + * > >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor > >> + * [out] params[1].value.a: 32bit LSB resource table memory address > >> + * [out] params[1].value.b: 32bit MSB resource table memory address > >> + * [out] params[2].value.a: 32bit LSB resource table memory size > >> + * [out] params[2].value.b: 32bit MSB resource table memory size > >> + */ > >> +#define TA_RPROC_FW_CMD_GET_RSC_TABLE 4 > >> + > >> +/* > >> + * Return the address of the core dump > >> + * > >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor > >> + * [out] params[1].memref: address of the core dump image if exist, > >> + * else return Null > >> + */ > >> +#define TA_RPROC_FW_CMD_GET_COREDUMP 5 > >> + > >> +struct tee_rproc_context { > >> + struct list_head sessions; > >> + struct tee_context *tee_ctx; > >> + struct device *dev; > >> +}; > >> + > >> +static struct tee_rproc_context *tee_rproc_ctx; > >> + > >> +static void tee_rproc_prepare_args(struct tee_rproc *trproc, int cmd, > >> + struct tee_ioctl_invoke_arg *arg, > >> + struct tee_param *param, > >> + unsigned int num_params) > >> +{ > >> + memset(arg, 0, sizeof(*arg)); > >> + memset(param, 0, MAX_TEE_PARAM_ARRY_MEMBER * sizeof(*param)); > >> + > >> + arg->func = cmd; > >> + arg->session = trproc->session_id; > >> + arg->num_params = num_params + 1; > >> + > >> + param[0] = (struct tee_param) { > >> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, > >> + .u.value.a = trproc->rproc_id, > >> + }; > >> +} > >> + > >> +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw) > >> +{ > >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > >> + struct tee_rproc *trproc = rproc->tee_interface; > >> + struct tee_ioctl_invoke_arg arg; > >> + struct tee_shm *fw_shm; > >> + int ret; > >> + > >> + if (!trproc) > >> + return -EINVAL; > >> + > >> + fw_shm = tee_shm_register_kernel_buf(tee_rproc_ctx->tee_ctx, (void *)fw->data, fw->size); > >> + if (IS_ERR(fw_shm)) > >> + return PTR_ERR(fw_shm); > >> + > >> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_LOAD_FW, &arg, param, 1); > >> + > >> + /* Provide the address of the firmware image */ > >> + param[1] = (struct tee_param) { > >> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT, > >> + .u.memref = { > >> + .shm = fw_shm, > >> + .size = fw->size, > >> + .shm_offs = 0, > >> + }, > >> + }; > >> + > >> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); > >> + if (ret < 0 || arg.ret != 0) { > >> + dev_err(tee_rproc_ctx->dev, > >> + "TA_RPROC_FW_CMD_LOAD_FW invoke failed TEE err: %x, ret:%x\n", > >> + arg.ret, ret); > >> + if (!ret) > >> + ret = -EIO; > >> + } > >> + > >> + tee_shm_free(fw_shm); > >> + > >> + return ret; > >> +} > >> +EXPORT_SYMBOL_GPL(tee_rproc_load_fw); > >> + > >> +static int tee_rproc_get_loaded_rsc_table(struct rproc *rproc, phys_addr_t *rsc_pa, > >> + size_t *table_sz) > >> +{ > >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > >> + struct tee_rproc *trproc = rproc->tee_interface; > >> + struct tee_ioctl_invoke_arg arg; > >> + int ret; > >> + > >> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_GET_RSC_TABLE, &arg, param, 2); > >> + > >> + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; > >> + param[2].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; > >> + > >> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); > >> + if (ret < 0 || arg.ret != 0) { > >> + dev_err(tee_rproc_ctx->dev, > >> + "TA_RPROC_FW_CMD_GET_RSC_TABLE invoke failed TEE err: %x, ret:%x\n", > >> + arg.ret, ret); > >> + return -EIO; > >> + } > >> + > >> + *table_sz = param[2].u.value.a; > >> + > >> + if (*table_sz) > >> + *rsc_pa = param[1].u.value.a; > >> + else > >> + *rsc_pa = 0; > >> + > >> + return 0; > >> +} > >> + > >> +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) > >> +{ > >> + phys_addr_t rsc_table; > >> + void __iomem *rsc_va; > >> + size_t table_sz; > >> + int ret; > >> + > >> + ret = tee_rproc_load_fw(rproc, fw); > >> + if (ret) > >> + return ret; > >> + > >> + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table, &table_sz); > >> + if (ret) > >> + return ret; > >> + > >> + /* > >> + * We assume here that the memory mapping is the same between the TEE and Linux kernel > >> + * contexts. Else a new TEE remoteproc service could be needed to get a copy of the > >> + * resource table > >> + */ > >> + rsc_va = ioremap_wc(rsc_table, table_sz); > >> + if (IS_ERR_OR_NULL(rsc_va)) { > >> + dev_err(tee_rproc_ctx->dev, "Unable to map memory region: %pa+%zx\n", > >> + &rsc_table, table_sz); > >> + return -ENOMEM; > >> + } > >> + > >> + /* > >> + * Create a copy of the resource table to have the same behavior as the elf loader. > >> + * This cached table will be used after the remoteproc stops to free resources, and for > >> + * crash recovery to reapply the settings. > >> + */ > >> + rproc->cached_table = kmemdup((__force void *)rsc_va, table_sz, GFP_KERNEL); > >> + if (!rproc->cached_table) { > >> + ret = -ENOMEM; > >> + goto out; > >> + } > >> + > >> + rproc->table_ptr = rproc->cached_table; > >> + rproc->table_sz = table_sz; > >> + > >> +out: > >> + iounmap(rsc_va); > >> + return ret; > >> +} > >> +EXPORT_SYMBOL_GPL(tee_rproc_parse_fw); > >> + > >> +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc *rproc, > >> + const struct firmware *fw) > >> +{ > >> + struct tee_rproc *trproc = rproc->tee_interface; > >> + phys_addr_t rsc_table; > >> + size_t table_sz; > >> + int ret; > >> + > >> + if (!trproc) > >> + return ERR_PTR(-EINVAL); > >> + > >> + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table, &table_sz); > >> + if (ret) > >> + return ERR_PTR(ret); > >> + > >> + rproc->table_sz = table_sz; > >> + if (!table_sz) > >> + return NULL; > >> + > >> + /* > >> + * At this step the memory area that contains the resource table should have be declared > >> + * in the remote proc platform driver and allocated by rproc_alloc_registered_carveouts(). > >> + */ > >> + > >> + return (struct resource_table *)rproc_pa_to_va(rproc, rsc_table, table_sz, NULL); > >> +} > >> +EXPORT_SYMBOL_GPL(tee_rproc_find_loaded_rsc_table); > >> + > >> +int tee_rproc_start(struct rproc *rproc) > >> +{ > >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > >> + struct tee_rproc *trproc = rproc->tee_interface; > >> + struct tee_ioctl_invoke_arg arg; > >> + int ret = 0; > >> + > >> + if (!trproc) > >> + return -EINVAL; > >> + > >> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_START_FW, &arg, param, 0); > >> + > >> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); > >> + if (ret < 0 || arg.ret != 0) { > >> + dev_err(tee_rproc_ctx->dev, > >> + "TA_RPROC_FW_CMD_START_FW invoke failed TEE err: %x, ret:%x\n", > >> + arg.ret, ret); > >> + if (!ret) > >> + return -EIO; > >> + } > >> + > >> + return 0; > >> +} > >> +EXPORT_SYMBOL_GPL(tee_rproc_start); > >> + > >> +int tee_rproc_stop(struct rproc *rproc) > >> +{ > >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > >> + struct tee_rproc *trproc = rproc->tee_interface; > >> + struct tee_ioctl_invoke_arg arg; > >> + int ret; > >> + > >> + if (!trproc) > >> + return -EINVAL; > >> + > >> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_STOP_FW, &arg, param, 0); > >> + > >> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); > >> + if (ret < 0 || arg.ret != 0) { > >> + dev_err(tee_rproc_ctx->dev, > >> + "TA_RPROC_FW_CMD_STOP_FW invoke failed TEE err: %x, ret:%x\n", > >> + arg.ret, ret); > >> + if (!ret) > >> + ret = -EIO; > >> + } > >> + > >> + return ret; > >> +} > >> +EXPORT_SYMBOL_GPL(tee_rproc_stop); > >> + > >> +static const struct tee_client_device_id stm32_tee_rproc_id_table[] = { > >> + {UUID_INIT(0x80a4c275, 0x0a47, 0x4905, > >> + 0x82, 0x85, 0x14, 0x86, 0xa9, 0x77, 0x1a, 0x08)}, > >> + {} > >> +}; > >> + > >> +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, unsigned int rproc_id) > >> +{ > >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > >> + struct tee_ioctl_open_session_arg sess_arg; > >> + struct tee_client_device *tee_device; > >> + struct tee_rproc *trproc, *p_err; > >> + int ret; > >> + > >> + /* > >> + * Test if the device has been probed by the TEE bus. In case of failure, we ignore the > >> + * reason. The bus could be not yet probed or the service not available in the secure > >> + * firmware.The assumption in such a case is that the TEE remoteproc is not probed. > >> + */ > >> + if (!tee_rproc_ctx) > >> + return ERR_PTR(-EPROBE_DEFER); > >> + > >> + /* Prevent tee rproc module from being removed */ > >> + if (!try_module_get(THIS_MODULE)) { > >> + dev_err(tee_rproc_ctx->dev, "can't get owner\n"); > >> + p_err = ERR_PTR(-ENODEV); > >> + goto module_put; > >> + } > >> + > >> + trproc = devm_kzalloc(dev, sizeof(*trproc), GFP_KERNEL); > >> + if (!trproc) { > >> + p_err = ERR_PTR(-ENOMEM); > >> + goto module_put; > >> + } > >> + tee_device = to_tee_client_device(tee_rproc_ctx->dev); > >> + memset(&sess_arg, 0, sizeof(sess_arg)); > >> + > >> + memcpy(sess_arg.uuid, tee_device->id.uuid.b, TEE_IOCTL_UUID_LEN); > >> + > >> + sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL; > >> + sess_arg.num_params = 1; > >> + > >> + param[0] = (struct tee_param) { > >> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, > >> + .u.value.a = rproc_id, > >> + }; > >> + > >> + ret = tee_client_open_session(tee_rproc_ctx->tee_ctx, &sess_arg, param); > >> + if (ret < 0 || sess_arg.ret != 0) { > >> + dev_err(dev, "tee_client_open_session failed, err: %x\n", sess_arg.ret); > >> + p_err = ERR_PTR(-EINVAL); > >> + goto module_put; > >> + } > >> + > >> + trproc->parent = dev; > >> + trproc->rproc_id = rproc_id; > >> + trproc->session_id = sess_arg.session; > >> + > >> + trproc->rproc = rproc; > >> + rproc->tee_interface = trproc; > >> + > >> + list_add_tail(&trproc->node, &tee_rproc_ctx->sessions); > >> + > >> + return trproc; > >> + > >> +module_put: > >> + module_put(THIS_MODULE); > >> + return p_err; > >> +} > >> +EXPORT_SYMBOL_GPL(tee_rproc_register); > >> + > >> +int tee_rproc_unregister(struct tee_rproc *trproc) > >> +{ > >> + struct rproc *rproc = trproc->rproc; > >> + int ret; > >> + > >> + ret = tee_client_close_session(tee_rproc_ctx->tee_ctx, trproc->session_id); > >> + if (ret < 0) > >> + dev_err(trproc->parent, "tee_client_close_session failed, err: %x\n", ret); > >> + > >> + list_del(&trproc->node); > >> + rproc->tee_interface = NULL; > >> + > >> + module_put(THIS_MODULE); > >> + > >> + return ret; > >> +} > >> +EXPORT_SYMBOL_GPL(tee_rproc_unregister); > >> + > >> +static int tee_rproc_ctx_match(struct tee_ioctl_version_data *ver, const void *data) > >> +{ > >> + /* Today we support only the OP-TEE, could be extend to other tees */ > >> + return (ver->impl_id == TEE_IMPL_ID_OPTEE); > >> +} > >> + > >> +static int tee_rproc_probe(struct device *dev) > >> +{ > >> + struct tee_context *tee_ctx; > >> + int ret; > >> + > >> + /* Open context with TEE driver */ > >> + tee_ctx = tee_client_open_context(NULL, tee_rproc_ctx_match, NULL, NULL); > >> + if (IS_ERR(tee_ctx)) > >> + return PTR_ERR(tee_ctx); > >> + > >> + tee_rproc_ctx = devm_kzalloc(dev, sizeof(*tee_ctx), GFP_KERNEL); > > > > I started reviewing this set - aside from the above allocation that isn't right, > > I am definitely not sure about ops::pa_to_va(). There is a patchset from TI on > > the mailing list [1] that also needs to translate addresses only accessible to > > the remote processor and they simply enhanced their ops::da_to_va(). Perhaps > > I'll find an answer as I continue to review this set... > > > The DA to PA conversion is handled by OP-TEE when loading the firmware. > Therefore, I have assumed that Linux could not know how to convert from DA to > PA. This question is also relevant for the "attach" use case, I guess. > > If we consider that the DA to VA conversion should always be supported by the > remoteproc driver, we would need to obtain the DA from OP-TEE. > > The impact would be to update the TA_RPROC_FW_CMD_GET_RSC_TABLE API to also > return the DA. This would require changes in the OP-TEE code by adding a new > output parameter to retrieve the DA. I don't like all the alternate solutions to rproc_pa_to_va() that I come up with so let's keep it for now. > > Thanks, > Arnaud > > > > > > [1]. [PATCH v10 0/8] TI K3 M4F support on AM62 and AM64 SoCs > > > >> + if (!tee_rproc_ctx) { > >> + ret = -ENOMEM; > >> + goto err; > >> + } > >> + > >> + tee_rproc_ctx->dev = dev; > >> + tee_rproc_ctx->tee_ctx = tee_ctx; > >> + INIT_LIST_HEAD(&tee_rproc_ctx->sessions); > >> + > >> + return 0; > >> +err: > >> + tee_client_close_context(tee_ctx); > >> + > >> + return ret; > >> +} > >> + > >> +static int tee_rproc_remove(struct device *dev) > >> +{ > >> + struct tee_rproc *entry, *tmp; > >> + > >> + list_for_each_entry_safe(entry, tmp, &tee_rproc_ctx->sessions, node) { > >> + tee_client_close_session(tee_rproc_ctx->tee_ctx, entry->session_id); > >> + list_del(&entry->node); > >> + kfree(entry); > >> + } > >> + > >> + tee_client_close_context(tee_rproc_ctx->tee_ctx); > >> + > >> + return 0; > >> +} > >> + > >> +MODULE_DEVICE_TABLE(tee, stm32_tee_rproc_id_table); > >> + > >> +static struct tee_client_driver tee_rproc_fw_driver = { > >> + .id_table = stm32_tee_rproc_id_table, > >> + .driver = { > >> + .name = KBUILD_MODNAME, > >> + .bus = &tee_bus_type, > >> + .probe = tee_rproc_probe, > >> + .remove = tee_rproc_remove, > >> + }, > >> +}; > >> + > >> +static int __init tee_rproc_fw_mod_init(void) > >> +{ > >> + return driver_register(&tee_rproc_fw_driver.driver); > >> +} > >> + > >> +static void __exit tee_rproc_fw_mod_exit(void) > >> +{ > >> + driver_unregister(&tee_rproc_fw_driver.driver); > >> +} > >> + > >> +module_init(tee_rproc_fw_mod_init); > >> +module_exit(tee_rproc_fw_mod_exit); > >> + > >> +MODULE_DESCRIPTION(" TEE remote processor control driver"); > >> +MODULE_LICENSE("GPL"); > >> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h > >> index 28aa62a3b505..6168f778414f 100644 > >> --- a/include/linux/remoteproc.h > >> +++ b/include/linux/remoteproc.h > >> @@ -505,6 +505,8 @@ enum rproc_features { > >> RPROC_MAX_FEATURES, > >> }; > >> > >> +struct tee_rproc; > >> + > >> /** > >> * struct rproc - represents a physical remote processor device > >> * @node: list node of this rproc object > >> @@ -547,6 +549,7 @@ enum rproc_features { > >> * @cdev: character device of the rproc > >> * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release > >> * @features: indicate remoteproc features > >> + * @tee_interface: pointer to the remoteproc tee context > >> */ > >> struct rproc { > >> struct list_head node; > >> @@ -588,6 +591,7 @@ struct rproc { > >> struct cdev cdev; > >> bool cdev_put_on_release; > >> DECLARE_BITMAP(features, RPROC_MAX_FEATURES); > >> + struct tee_rproc *tee_interface; > >> }; > >> > >> /** > >> diff --git a/include/linux/tee_remoteproc.h b/include/linux/tee_remoteproc.h > >> new file mode 100644 > >> index 000000000000..c9ae4f60e844 > >> --- /dev/null > >> +++ b/include/linux/tee_remoteproc.h > >> @@ -0,0 +1,100 @@ > >> +/* SPDX-License-Identifier: GPL-2.0-or-later */ > >> +/* > >> + * Copyright(c) 2024 STMicroelectronics - All Rights Reserved > >> + */ > >> + > >> +#ifndef TEE_REMOTEPROC_H > >> +#define TEE_REMOTEPROC_H > >> + > >> +#include <linux/tee_drv.h> > >> +#include <linux/firmware.h> > >> +#include <linux/remoteproc.h> > >> + > >> +struct rproc; > >> + > >> +/** > >> + * struct tee_rproc - TEE remoteproc structure > >> + * @node: Reference in list > >> + * @rproc: Remoteproc reference > >> + * @parent: Parent device > >> + * @rproc_id: Identifier of the target firmware > >> + * @session_id: TEE session identifier > >> + */ > >> +struct tee_rproc { > >> + struct list_head node; > >> + struct rproc *rproc; > >> + struct device *parent; > >> + u32 rproc_id; > >> + u32 session_id; > >> +}; > >> + > >> +#if IS_REACHABLE(CONFIG_TEE_REMOTEPROC) > >> + > >> +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, > >> + unsigned int rproc_id); > >> +int tee_rproc_unregister(struct tee_rproc *trproc); > >> +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw); > >> +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw); > >> +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc *rproc, > >> + const struct firmware *fw); > >> +int tee_rproc_start(struct rproc *rproc); > >> +int tee_rproc_stop(struct rproc *rproc); > >> + > >> +#else > >> + > >> +static inline struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, > >> + unsigned int rproc_id) > >> +{ > >> + return ERR_PTR(-ENODEV); > >> +} > >> + > >> +static int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) > >> +{ > >> + /* This shouldn't be possible */ > >> + WARN_ON(1); > >> + > >> + return 0; > >> +} > >> + > >> +static inline int tee_rproc_unregister(struct tee_rproc *trproc) > >> +{ > >> + /* This shouldn't be possible */ > >> + WARN_ON(1); > >> + > >> + return 0; > >> +} > >> + > >> +static inline int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw) > >> +{ > >> + /* This shouldn't be possible */ > >> + WARN_ON(1); > >> + > >> + return 0; > >> +} > >> + > >> +static inline int tee_rproc_start(struct rproc *rproc) > >> +{ > >> + /* This shouldn't be possible */ > >> + WARN_ON(1); > >> + > >> + return 0; > >> +} > >> + > >> +static inline int tee_rproc_stop(struct rproc *rproc) > >> +{ > >> + /* This shouldn't be possible */ > >> + WARN_ON(1); > >> + > >> + return 0; > >> +} > >> + > >> +static inline struct resource_table * > >> +tee_rproc_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *fw) > >> +{ > >> + /* This shouldn't be possible */ > >> + WARN_ON(1); > >> + > >> + return NULL; > >> +} > >> +#endif /* CONFIG_TEE_REMOTEPROC */ > >> +#endif /* TEE_REMOTEPROC_H */ > >> -- > >> 2.25.1 > >>