Add DT bindings for raspberrypi,rp1-cfe. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx> --- .../bindings/media/raspberrypi,rp1-cfe.yaml | 98 ++++++++++++++++++++++ 1 file changed, 98 insertions(+) diff --git a/Documentation/devicetree/bindings/media/raspberrypi,rp1-cfe.yaml b/Documentation/devicetree/bindings/media/raspberrypi,rp1-cfe.yaml new file mode 100644 index 000000000000..851533de2305 --- /dev/null +++ b/Documentation/devicetree/bindings/media/raspberrypi,rp1-cfe.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/raspberrypi,rp1-cfe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raspberry Pi PiSP Camera Front End + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx> + - Raspberry Pi Kernel Maintenance <kernel-list@xxxxxxxxxxxxxxx> + +description: | + The Raspberry Pi PiSP Camera Front End is a module in Raspberrypi 5's RP1 I/O + controller, that contains: + - MIPI D-PHY + - MIPI CSI-2 receiver + - Simple image processor (called PiSP Front End, or FE) + + The FE documentation is available at: + https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf + + The PHY and CSI-2 receiver part have no public documentation. + +properties: + compatible: + items: + - const: raspberrypi,rp1-cfe + + reg: + items: + - description: CSI-2 registers + - description: D-PHY registers + - description: MIPI CFG (a simple top-level mux) registers + - description: FE registers + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + description: CSI-2 RX Port + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + clock-lanes: + maxItems: 1 + + required: + - clock-lanes + - data-lanes + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + rp1 { + #address-cells = <2>; + #size-cells = <2>; + + csi@110000 { + compatible = "raspberrypi,rp1-cfe"; + reg = <0xc0 0x40110000 0x0 0x100>, + <0xc0 0x40114000 0x0 0x100>, + <0xc0 0x40120000 0x0 0x100>, + <0xc0 0x40124000 0x0 0x1000>; + + interrupts = <42>; + + clocks = <&rp1_clocks>; + + port { + csi_ep: endpoint { + remote-endpoint = <&cam_endpoint>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; -- 2.34.1
