Libvirt Users

• Thread Index

• multiple vms with same PCI passthrough
  • From: Daniel Black
• unable to migrate non shared storage in tunneled mode
  • From: Vjaceslavs Klimovs
• Constant error logging
  • From: Digimer
• Re: Problem with xen config
  • From: Jim Fehlig
• Re: pass-though Intel gpu int o a vm
  • From: Laine Stump
• Re: pass-though Intel gpu int o a vm
  • From: daggs
• Re: pass-though Intel gpu int o a vm
  • From: Erik Skultety
• Re: pass-though Intel gpu int o a vm
  • From: daggs
• Re: ipv6 NAT; accept_ra errors and about network choice
  • From: Ian Wienand
• Re: ipv6 NAT; accept_ra errors and about network choice
  • From: Laine Stump
• Re: pass-though Intel gpu int o a vm
  • From: Erik Skultety
• ipv6 NAT; accept_ra errors and about network choice
  • From: Ian Wienand
• Re: Problem with xen config
  • From: Jim Fehlig
• Re: Problem with xen config
  • From: Christoph
• Re: Problem with xen config
  • From: Jim Fehlig
• Re: Problem with xen config
  • From: Christoph
• Re: Problem with xen config
  • From: Laine Stump
• Re: Problem with xen config
  • From: Jim Fehlig
• Re: Question for smbios
  • From: Alvin Starr
• Re: Installing Kali Linux using KVM virt-install tool
  • From: Pavel Hrdina
• Re: Problem with xen config
  • From: Christoph
• Re: Question for smbios
  • From: David
• Re: Question for smbios
  • From: Pavel Hrdina
• Question for smbios
  • From: David
• RE: virsh attach-interface auto up
  • From: Marc Roos
• Re: virsh attach-interface auto up
  • From: brent s.
• Re: Libvirtd Fails to Launch First Time
  • From: Ken Swenson
• RE: virsh attach-interface auto up
  • From: Marc Roos
• Re: virsh attach-interface auto up
  • From: Laine Stump
• Re: Libvirtd Fails to Launch First Time
  • From: Laine Stump
• Re: virsh attach-interface auto up
  • From: brent s.
• pass-though Intel gpu int o a vm
  • From: daggs
• Libvirtd Fails to Launch First Time
  • From: Ken Swenson
• virsh attach-interface auto up
  • From: Marc Roos
• Re: Installing Kali Linux using KVM virt-install tool
  • From: Kaushal Shriyan
• Re: Installing Kali Linux using KVM virt-install tool
  • From: Pavel Hrdina
• Re: Installing Kali Linux using KVM virt-install tool
  • From: Kaushal Shriyan
• Re: Installing Kali Linux using KVM virt-install tool
  • From: Erik Skultety
• Re: Installing Kali Linux using KVM virt-install tool
  • From: Kaushal Shriyan
• Re: Installing Kali Linux using KVM virt-install tool
  • From: Kaushal Shriyan
• Re: Installing Kali Linux using KVM virt-install tool
  • From: Pavel Hrdina
• Re: Question about disabling UFO on guest
  • From: Yalan Zhang
• Installing Kali Linux using KVM virt-install tool
  • From: Kaushal Shriyan
• Re: Libvirt qemu-system-x86_64 on ppc64le no multi threading
  • From: Daniel P. Berrange
• Re: Libvirt qemu-system-x86_64 on ppc64le no multi threading
  • From: Kim-Norman Sahm
• Re: Libvirt qemu-system-x86_64 on ppc64le no multi threading
  • From: Daniel P. Berrangé
• Re: Xend and libvirt
  • From: K. Kahurani
• Libvirt qemu-system-x86_64 on ppc64le no multi threading
  • From: Kim-Norman Sahm
• 回复: Cannot pass secret id for backing file after taking external snapshot on encrypted qcow2 file
  • From: YaoHua Wu
• Re: Xend and libvirt
  • From: Daniel P. Berrangé
• Re: Xend and libvirt
  • From: K. Kahurani
• Way to skip check for 'libvirt-qemu' group and user while installing guest
  • From: john doe
• Re: Xend and libvirt
  • From: Daniel P. Berrangé
• Xend and libvirt
  • From: David K. Kahurani
• Re: libvirt segfaults with "internal,error: Missing monitor reply object", during block live-migration
  • From: Alex Walender
• Re: libvirt segfaults with "internal,error: Missing monitor reply object", during block live-migration
  • From: Michal Privoznik
• Re: libvirt segfaults with "internal,error: Missing monitor reply object", during block live-migration
  • From: Peter Krempa
• libvirt segfaults with "internal,error: Missing monitor reply object", during block live-migration
  • From: Alex Walender
• Re: Routed network can't reach outside network
  • From: Rui Correia
• machinectl does not show libvirtd vms
  • From: Ismael Bouya
• Re: Routed network can't reach outside network
  • From: Laine Stump
• Re: Problem with xen config
  • From: Jim Fehlig
• Problem with xen config
  • From: Christoph
• Re: Routed network can't reach outside network
  • From: Rui Correia
• Re: Routed network can't reach outside network
  • From: Rui Correia
• Re: Routed network can't reach outside network
  • From: Daniel P. Berrangé
• Re: Routed network can't reach outside network
  • From: Rui Correia
• Re: Routed network can't reach outside network
  • From: Rui Correia
• RE: Routed network can't reach outside network
  • From: Marc Roos
• Re: Routed network can't reach outside network
  • From: Ken D'Ambrosio
• virt-install missing parameters
  • From: David
• Re: host and vm on isolated network, there is ip (via dhcp) but not ping
  • From: daggs
• dns test 2
  • From: NO SPAM
• Re: host and vm on isolated network, there is ip (via dhcp) but not ping
  • From: Laine Stump
• incomplete features for external snapshot
  • From: Henry lol
• dns test
  • From: NO SPAM
• host and vm on isolated network, there is ip (via dhcp) but not ping
  • From: daggs
• Re: Routed network can't reach outside network
  • From: Daniel P. Berrange
• Routed network can't reach outside network
  • From: Rui Correia
• 9p file sharing issue
  • From: Johan
• Re: Unable to decode message length
  • From: Valentin David
• Re: Unable to decode message length
  • From: Valentin David
• Cannot pass secret id for backing file after taking external snapshot on encrypted qcow2 file
  • From: yaohua.wu@xxxxxxxxx
• Re: SELinux labels change in libvirt
  • From: Daniel P. Berrangé
• Re: SELinux labels change in libvirt
  • From: Ram Lavi
• Re: Unable to decode message length
  • From: Michal Privoznik
• Unable to decode message length
  • From: Valentin David
• Re: SELinux labels change in libvirt
  • From: Daniel P. Berrangé
• Re: SELinux labels change in libvirt
  • From: Ram Lavi
• Re: SELinux labels change in libvirt
  • From: Daniel P. Berrangé
• SELinux labels change in libvirt
  • From: Ram Lavi
• Re: Help with external snapshots as backups
  • From: Peter Krempa
• Help with external snapshots as backups
  • From: Alex Regan
• Re: Emulated TPM devices and snapshots of running VMs
  • From: Milan Zamazal
• Re: Emulated TPM devices and snapshots of running VMs
  • From: Peter Krempa
• Re: Emulated TPM devices and snapshots of running VMs
  • From: Milan Zamazal
• Re: Could you please help with questions about the net failover feature
  • From: Ken Cox
• Re: Emulated TPM devices and snapshots of running VMs
  • From: Peter Krempa
• Re: Emulated TPM devices and snapshots of running VMs
  • From: Milan Zamazal
• Re: NVDIMM in devdax mode and SELinux (was: Two questions about NVDIMM devices)
  • From: Daniel P. Berrangé
• NVDIMM in devdax mode and SELinux (was: Two questions about NVDIMM devices)
  • From: Milan Zamazal
• Re: Could you please help with questions about the net failover feature
  • From: Laine Stump
• Re: Could you please help with questions about the net failover feature
  • From: Ken Cox
• Re: Why wireless interface cannot be attached to a Linux host bridge?
  • From: ryotaro kobayashi
• Re: Why wireless interface cannot be attached to a Linux host bridge?
  • From: Francesc Guasch
• Re: Could you please help with questions about the net failover feature
  • From: Stefan Assmann
• Re: Why wireless interface cannot be attached to a Linux host bridge?
  • From: ryotaro kobayashi
• Re: Why wireless interface cannot be attached to a Linux host bridge?
  • From: ryotaro kobayashi
• Re: Why wireless interface cannot be attached to a Linux host bridge?
  • From: Pol Van Aubel
• Re: Why wireless interface cannot be attached to a Linux host bridge?
  • From: brent s.
• Re: Why wireless interface cannot be attached to a Linux host bridge?
  • From: Laine Stump
• Re: Why wireless interface cannot be attached to a Linux host bridge?
  • From: Ken D'Ambrosio
• Re: Why wireless interface cannot be attached to a Linux host bridge?
  • From: Laine Stump
• Why wireless interface cannot be attached to a Linux host bridge?
  • From: ryotaro kobayashi
• Re: Could you please help with questions about the net failover feature
  • From: Laine Stump
• Re: Could you please help with questions about the net failover feature
  • From: Yalan Zhang
• Emulated TPM devices and snapshots of running VMs
  • From: Milan Zamazal
• Re: Testing DKIM signatures
  • From: Ján Tomko
• Testing DKIM signatures
  • From: dberrange
• Re: Two questions about NVDIMM devices
  • From: Milan Zamazal
• Re: Two questions about NVDIMM devices
  • From: Daniel P. Berrangé
• Two questions about NVDIMM devices
  • From: Milan Zamazal
• Asking for suggestion and questions regarding the workings/internals of Libvirt
  • From: Shashwat shagun
• Re: image of OS X how to boot
  • From: Jerry Geis
• RE: image of OS X how to boot
  • From: Marc Roos
• Re: image of OS X how to boot
  • From: Jerry Geis
• RE: image of OS X how to boot
  • From: Marc Roos
• Re: image of OS X how to boot
  • From: Jerry Geis
• Re: no/empty NUMA cells on domain XML
  • From: Polina Agranat
• Re: no/empty NUMA cells on domain XML
  • From: Daniel P. Berrangé
• no/empty NUMA cells on domain XML
  • From: Polina Agranat
• RE: image of OS X how to boot
  • From: Marc Roos
• image of OS X how to boot
  • From: Jerry Geis
• Re: plug pre-created tap devices to libvirt guests
  • From: Daniel P. Berrangé
• Re: plug pre-created tap devices to libvirt guests
  • From: Daniel P. Berrangé
• Re: Do we need "amd_iommu=on" for AMD system anymore?
  • From: Daniel P. Berrangé
• Re: plug pre-created tap devices to libvirt guests
  • From: Miguel Duarte de Mora Barroso
• Re: plug pre-created tap devices to libvirt guests
  • From: Miguel Duarte de Mora Barroso
• Do we need "amd_iommu=on" for AMD system anymore?
  • From: Yalan Zhang
• Re: Virtual Bridge "Network" for Sandbox
  • From: Paul O'Rorke
• Re: Virtual Bridge "Network" for Sandbox
  • From: Paul O'Rorke
• Re: Virtual Bridge "Network" for Sandbox
  • From: Peter Crowther
• Re: Virtual Bridge "Network" for Sandbox
  • From: Laine Stump
• Re: Virtual Bridge "Network" for Sandbox
  • From: Paul O'Rorke
• Re: Virtual Bridge "Network" for Sandbox
  • From: Laine Stump
• Virtual Bridge "Network" for Sandbox
  • From: Paul O'Rorke
• Re: get contents of a storage volume in bytes
  • From: Daniel P. Berrange
• Re: get contents of a storage volume in bytes
  • From: Peter Krempa
• get contents of a storage volume in bytes
  • From: Shashwat shagun
• RBD volume pools and locks
  • From: Guy Godfroy
• Re: virsh edit does not work when <initiator> and <auth> is used in config
  • From: Peter Krempa
• virsh edit does not work when <initiator> and <auth> is used in config
  • From: Fourhundred Thecat
• volume pool for LXC
  • From: Guy Godfroy
• Re: qemu hook: event for source host too
  • From: Guy Godfroy
• Re: qemu hook: event for source host too
  • From: Michal Privoznik
• Missing vnet interface in migration
  • From: Ales Musil
• Re: Feature request? Auto start vm upon next shutdown
  • From: Pavel Hrdina
• Re: Feature request? Auto start vm upon next shutdown
  • From: brent s.
• RE: Feature request? Auto start vm upon next shutdown
  • From: Marc Roos
• Re: Feature request? Auto start vm upon next shutdown
  • From: brent s.
• Feature request? Auto start vm upon next shutdown
  • From: Marc Roos
• setting guest mtu
  • From: Marc Roos
• Re: NVDIMM sizes and DIMM hot plug
  • From: Martin Kletzander
• Re: qemu hook: event for source host too
  • From: Guy Godfroy
• Re: Guidance for First Timer
  • From: Daniel P. Berrangé
• Re: NVDIMM sizes and DIMM hot plug
  • From: Milan Zamazal
• Guidance for First Timer
  • From: Sanyam Rajpal
• Re: Is it possible to configure libvirt's MAC generation?
  • From: brent s.
• Re: NVDIMM sizes and DIMM hot plug
  • From: Milan Zamazal
• Re: NVDIMM sizes and DIMM hot plug
  • From: Peter Krempa
• Re: NVDIMM sizes and DIMM hot plug
  • From: Daniel P. Berrangé
• NVDIMM sizes and DIMM hot plug
  • From: Milan Zamazal
• Re: Reintroduce modern CPU in model selection
  • From: Gionatan Danti
• Reintroduce modern CPU in model selection
  • From: Gionatan Danti
• Re: Is it possible to configure libvirt's MAC generation?
  • From: Erik Skultety
• RE: Is it possible to configure libvirt's MAC generation?
  • From: Marc Roos
• Re: Is it possible to configure libvirt's MAC generation?
  • From: Alvin Starr
• Re: Is it possible to configure libvirt's MAC generation?
  • From: Ian Pilcher
• Re: Is it possible to configure libvirt's MAC generation?
  • From: Peter Crowther
• Is it possible to configure libvirt's MAC generation?
  • From: Ian Pilcher
• Re: Live migration to another volume at the same host
  • From: Paul van der Vlis
• Re: Live migration to another volume at the same host
  • From: Daniel P. Berrangé
• Re: Migrate to a bigger disk possible?
  • From: Paul van der Vlis
• Live migration to another volume at the same host
  • From: Paul van der Vlis
• Re: Libvirt compile issues
  • From: K. Kahurani
• Re: Disable virtlockd
  • From: Felix Queißner
• Re: No outbound connectivity from guest VM(fedora 32)
  • From: Laine Stump
• Re: Permission to disk set wrong when restoring from memory snapshot?
  • From: Liran Rotenberg
• Re: Permission to disk set wrong when restoring from memory snapshot?
  • From: Peter Krempa
• Re: Permission to disk set wrong when restoring from memory snapshot?
  • From: Liran Rotenberg
• Re: Permission to disk set wrong when restoring from memory snapshot?
  • From: Peter Krempa
• Permission to disk set wrong when restoring from memory snapshot?
  • From: Liran Rotenberg
• Re: Disable virtlockd
  • From: Peter Krempa
• Disable virtlockd
  • From: Felix Queißner
• Re: No outbound connectivity from guest VM(fedora 32)
  • From: Justin Stephenson
• Re: No outbound connectivity from guest VM(fedora 32)
  • From: Daniel P. Berrangé
• No outbound connectivity from guest VM(fedora 32)
  • From: Justin Stephenson
• Re: Fwd: Hello
  • From: Daniel P. Berrangé
• Fwd: Hello
  • From: K. Kahurani
• Re: libvirt-defined network vs/and openvswitch bridge
  • From: Michal Privoznik
• libvirt-defined network vs/and openvswitch bridge
  • From: Po Dragonwarrior
• About Libvirt Setmem&dommemstat Function
  • From: =?gb18030?b?lDm6Nw==?=
• About Libvirt Setmem&dommemstat Function
  • From: =?gb18030?b?lDm6Nw==?=
• Re: macvtap direct
  • From: Laine Stump
• Re: macvtap direct
  • From: Subhendu Ghosh
• Re: Firmware auto-select limitation
  • From: Peter Krempa
• Re: Firmware auto-select limitation
  • From: Michal Privoznik
• Firmware auto-select limitation
  • From: GUOQING LI
• Re: DNSMASQ Libvirt
  • From: Michal Privoznik
• Re: What is expiry time represents in this format
  • From: Michal Privoznik
• Re: What is expiry time represents in this format
  • From: Peter Crowther
• DNSMASQ Libvirt
  • From: Santhosh Kumar Gunturu
• What is expiry time represents in this format
  • From: Santhosh Kumar Gunturu
• Re: Storage cleaning
  • From: Lothar Schilling
• Re: macvtap direct
  • From: Laine Stump
• Re: Storage cleaning
  • From: Lothar Schilling
• Storage cleaning
  • From: Lothar Schilling
• Re: Unit libvirtd.service could not be found. on VM
  • From: Dana Elfassy
• Re: USB-hotplugging fails with "failed to load cgroup BPF prog: Operation not permitted" on cgroups v2
  • From: Pol Van Aubel
• Re: libvirt object IVirtualBox is null
  • From: Daniel P. Berrangé
• libvirt object IVirtualBox is null
  • From: claudia freitas
• Re: Unit libvirtd.service could not be found. on VM
  • From: Dana Elfassy
• Another DKIM test message
  • From: dberrange@xxxxxxxxx
• Testing new email settings to fix DKIM
  • From: dberrange@xxxxxxxxx
• Re: Unit libvirtd.service could not be found. on VM
  • From: Michal Privoznik
• Re: Unit libvirtd.service could not be found. on VM
  • From: Dana Elfassy
• Running libvirtd inside chroot (mock to be precise)
  • From: Marcin Sobczyk
• Re: Unit libvirtd.service could not be found. on VM
  • From: Michal Privoznik
• macvtap direct
  • From: Subhendu Ghosh
• Re: Unit libvirtd.service could not be found. on VM
  • From: Daniel P. Berrangé
• Re: Unit libvirtd.service could not be found. on VM
  • From: Dana Elfassy
• Re: Unit libvirtd.service could not be found. on VM
  • From: Daniel P. Berrangé
• Re: Unit libvirtd.service could not be found. on VM
  • From: Dana Elfassy
• Re: Unit libvirtd.service could not be found. on VM
  • From: Daniel P. Berrangé
• Unit libvirtd.service could not be found. on VM
  • From: Dana Elfassy
• Re: blockcommit --pivot does not succeed in conjunction with qemu 5.0.0
  • From: Thomas Stein
• Re: blockcommit --pivot does not succeed in conjunction with qemu 5.0.0
  • From: Peter Krempa
• Nested Virtualization on Google Cloud.
  • From: Tanmoy Sinha
• Re: Libvirt APIs for creating virtual networks
  • From: Laine Stump
• Re: blockcommit --pivot does not succeed in conjunction with qemu 5.0.0
  • From: Thomas Stein
• blockcommit --pivot does not succeed in conjunction with qemu 5.0.0
  • From: Thomas Stein
• Re: Libvirt APIs for creating virtual networks
  • From: Santhosh Kumar Gunturu
• Further DKIM testing validation
  • From: dberrange@xxxxxxxxx
• Testing email DKIM handling
  • From: dberrange
• Re: Set hostname of guest during installation time
  • From: john doe
• Re: Set hostname of guest during installation time
  • From: Michal Privoznik
• Re: Set hostname of guest during installation time
  • From: john doe
• Re: Set hostname of guest during installation time
  • From: Michal Privoznik
• Re: Set hostname of guest during installation time
  • From: john doe
• Re: Set hostname of guest during installation time
  • From: Michal Privoznik
• Re: Set hostname of guest during installation time
  • From: john doe
• Re: virsh connect to xen:///system fails: "error: internal error: Unexpected driver type 'Xen' opened" ?
  • From: PGNet Dev
• Re: virsh connect to xen:///system fails: "error: internal error: Unexpected driver type 'Xen' opened" ?
  • From: Daniel P. Berrangé
• virsh connect to xen:///system fails: "error: internal error: Unexpected driver type 'Xen' opened" ?
  • From: PGNet Dev
• Re: Libvirt APIs for creating virtual networks
  • From: Laine Stump
• Re: Migrate to a bigger disk possible?
  • From: Paul van der Vlis
• Re: sync guest time
  • From: Daniel P. Berrangé
• Re: sync guest time
  • From: Miguel Duarte de Mora Barroso
• Re: [Query] Facing issue in build libvirt6.0 on ubuntu 1804
  • From: Ramesh B
• Re: [Query] Facing issue in build libvirt6.0 on ubuntu 1804
  • From: Michal Privoznik
• Re: [Query] Facing issue in build libvirt6.0 on ubuntu 1804
  • From: Ramesh B
• Re: sync guest time
  • From: Daniel P. Berrangé
• sync guest time
  • From: Miguel Duarte de Mora Barroso
• Re: [Query] Facing issue in build libvirt6.0 on ubuntu 1804
  • From: Ramesh B
• Re: [Query] Facing issue in build libvirt6.0 on ubuntu 1804
  • From: Daniel P. Berrangé
• Re: [Query] Facing issue in build libvirt6.0 on ubuntu 1804
  • From: Ramesh B
• Re: [Query] Facing issue in build libvirt6.0 on ubuntu 1804
  • From: Daniel P. Berrangé
• Re: [Query] Facing issue in build libvirt6.0 on ubuntu 1804
  • From: Michal Privoznik
• Re: [Query] Facing issue in build libvirt6.0 on ubuntu 1804
  • From: Ramesh B
• Re: [Query] Facing issue in build libvirt6.0 on ubuntu 1804
  • From: Michal Privoznik
• 回复: why libvirtd can not list the running domain?
  • From: 崔涛的个人邮箱
• Re: why libvirtd can not list the running domain?
  • From: Michal Privoznik
• why libvirtd can not list the running domain?
  • From: 崔涛的个人邮箱
• Re: [Query] Facing issue in build libvirt6.0 on ubuntu 1804
  • From: Daniel P. Berrangé
• Re: [Query] Facing issue in build libvirt6.0 on ubuntu 1804
  • From: Michal Privoznik
• [Query] Facing issue in build libvirt6.0 on ubuntu 1804
  • From: Ramesh B
• Re: "failed to setup INTx fd: Operation not permitted" error when using PCI passthrough
  • From: Riccardo Ravaioli
• Re: Libvirt APIs for creating virtual networks
  • From: Daniel P. Berrangé
• Re: Libvirt APIs for creating virtual networks
  • From: Santhosh Kumar Gunturu
• Re: Libvirt APIs for creating virtual networks
  • From: Daniel P. Berrangé
• Libvirt APIs for creating virtual networks
  • From: Santhosh Kumar Gunturu
• Re: Migrate to a bigger disk possible?
  • From: Brandon Doyle
• Re: Migrate to a bigger disk possible?
  • From: Peter Krempa
• Re: Migrate to a bigger disk possible?
  • From: Paul van der Vlis
• Re: Attaching DVD-writer
  • From: Andreas Thörn
• Re: domain: how long is new xml in saved file
  • From: Daniel P. Berrangé
• Re: Migrate to a bigger disk possible?
  • From: Peter Krempa
• Re: domain: how long is new xml in saved file
  • From: Andrea Bolognani
• Re: Migrate to a bigger disk possible?
  • From: Paul van der Vlis
• Re: Migrate to a bigger disk possible?
  • From: Peter Krempa
• Re: Migrate to a bigger disk possible?
  • From: Paul van der Vlis
• Migrate to a bigger disk possible?
  • From: Paul van der Vlis
• Re: Not able to add pcie card to guest: Operation not permitted
  • From: Mauricio Tavares
• Re: Not able to add pcie card to guest: Operation not permitted
  • From: Mauricio Tavares
• Re: Not able to add pcie card to guest: Operation not permitted
  • From: Peter Crowther
• Not able to add pcie card to guest: Operation not permitted
  • From: Mauricio Tavares
• Re: domain: how long is new xml in saved file
  • From: Eric Blake
• Re: domain: how long is new xml in saved file
  • From: Daniel P. Berrangé
• Re: domain: how long is new xml in saved file
  • From: Michal Privoznik
• domain: how long is new xml in saved file
  • From: Vincent Wu
• Re: Virsh migrate and paused vm
  • From: Jim Fehlig
• Virsh migrate and paused vm
  • From: Paras Pradhan
• Re: php libvirt show active snapshot
  • From: Andrea Bolognani
• Re: php libvirt show active snapshot
  • From: Michal Privoznik
• Re: php libvirt show active snapshot
  • From: Todd Lewis
• Re: Attaching DVD-writer
  • From: mb425018
• Re: My VMs don't get IP with libvirt and dnsmasq
  • From: Michal Privoznik
• Re: My VMs don't get IP with libvirt and dnsmasq
  • From: Computers Issues
• Re: My VMs don't get IP with libvirt and dnsmasq
  • From: Computers Issues
• Re: My VMs don't get IP with libvirt and dnsmasq
  • From: Michal Privoznik
• Re: My VMs don't get IP with libvirt and dnsmasq
  • From: Computers Issues
• Re: My VMs don't get IP with libvirt and dnsmasq
  • From: Michal Privoznik
• Re: Attaching DVD-writer
  • From: Peter Krempa
• Re: Attaching DVD-writer
  • From: Andreas Thörn
• Re: My VMs don't get IP with libvirt and dnsmasq
  • From: Computers Issues
• Re: Attaching DVD-writer
  • From: Tony Brian Albers
• Attaching DVD-writer
  • From: Andreas Thörn
• Re: My VMs don't get IP with libvirt and dnsmasq
  • From: Daniel Romero
• My VMs don't get IP with libvirt and dnsmasq
  • From: Computers Issues
• Re: php libvirt show active snapshot
  • From: Todd Lewis
• Re: Ovs error when starting vm: ovs-vsctl: 'del-port' command requires at least 1 arguments
  • From: Thomas Pircher
• Re: php libvirt show active snapshot
  • From: Michal Privoznik
• FYI: upstream bug reporting now using https://gitlab.com/libvirt
  • From: Daniel P. Berrangé
• Re: Can't start vm with enc backing files, No secret with id 'sec0' ?
  • From: 18781374080
• Re: Can't start vm with enc backing files, No secret with id 'sec0' ?
  • From: Peter Krempa
• Can't start vm with enc backing files, No secret with id 'sec0' ?
  • From: 18781374080
• Re:Re: what a correct use for virConnectDomainEventRegisterAny API, how to Obtain a stable expected result
  • From: thomas.kuang
• Re: php libvirt show active snapshot
  • From: Todd Lewis
• Re: php libvirt show active snapshot
  • From: Michal Privoznik
• Re: Connections Driver VirtualBox
  • From: Michal Privoznik
• Re: cloud-init libvirt
  • From: Alvin Starr
• Re: cloud-init libvirt
  • From: Erik Skultety
• Re: what a correct use for virConnectDomainEventRegisterAny API, how to Obtain a stable expected result
  • From: Daniel P. Berrangé
• Re: Running libvirtd on windows
  • From: Daniel P. Berrangé
• cloud-init libvirt
  • From: PunkGeek
• php libvirt show active snapshot
  • From: Todd Lewis
• Running libvirtd on windows
  • From: Dhananjay Joshi
• what a correct use for virConnectDomainEventRegisterAny API, how to Obtain a stable expected result
  • From: thomas.kuang
• Re: python equivalent for virDomainGetGuestInfo()
  • From: Yukin Chan
• python equivalent for virDomainGetGuestInfo()
  • From: Joe Muro
• PolKit rule and API matchaccess_drivers = [ "polkit" ]
  • From: Θεοφάνης Κοντογιάννης
• Connections Driver VirtualBox
  • From: claudia freitas
• Getting Intel RDT cache allocation status from libvirt?
  • From: Neil Moore
• Getting Intel RDT cache allocation status from libvirt?
  • From: Neil Moore
• "failed to setup INTx fd: Operation not permitted" error when using PCI passthrough
  • From: Riccardo Ravaioli
• when virEventAddTimeout trigger timeout ,should in the callback call virConnectDomainEventDeregisterAny ?
  • From: thomas.kuang
• why virConnectDomainEventRegisterAny can't alway trigger the callback ,how can i get a stable callback ?
  • From: thomas.kuang
• RE: libvirt remote uri format
  • From: Joe Muro
• Re: plug pre-created tap devices to libvirt guests
  • From: Laine Stump
• Re: plug pre-created tap devices to libvirt guests
  • From: Daniel P. Berrangé
• Re: plug pre-created tap devices to libvirt guests
  • From: Daniel P. Berrangé
• plug pre-created tap devices to libvirt guests
  • From: Miguel Duarte de Mora Barroso
• Re: libvirt Source RPMs for CentOS or RHEL?
  • From: FuLong Wang
• Re: libvirt remote uri format
  • From: Andrea Bolognani
• Re: libvirt remote uri format
  • From: Daniel P. Berrangé
• Re: libvirt remote uri format
  • From: Daniel P. Berrangé
• Re: libvirt remote uri format
  • From: Andrea Bolognani
• Question about libvirt filter features
  • From: george_boutwell
• libvirt remote uri format
  • From: Joe Muro
• Re: can libvirt.so use jemalloc to manage mem ?
  • From: Daniel P. Berrangé
• can libvirt.so use jemalloc to manage mem ?
  • From: thomas.kuang
• Re: libvirt Source RPMs for CentOS or RHEL?
  • From: Daniel P. Berrangé
• libvirt Source RPMs for CentOS or RHEL?
  • From: FuLong Wang
• Re: qemu hook: event for source host too
  • From: Guy Godfroy
• Re: How to perform an in-place upgrade for libvirt
  • From: FuLong Wang
• Re: How to perform an in-place upgrade for libvirt
  • From: Michal Prívozník
• Re: Ovs error when starting vm: ovs-vsctl: 'del-port' command requires at least 1 arguments
  • From: Thomas Pircher
• How to perform an in-place upgrade for libvirt
  • From: FuLong Wang
• Re: "configure: error: Unable to find <rpc/rpc.h>" when compiling libvirt 6.0.0 from a release tarball
  • From: FuLong Wang
• Re: Set hostname of guest during installation time
  • From: Michal Prívozník
• Re: Ovs error when starting vm: ovs-vsctl: 'del-port' command requires at least 1 arguments
  • From: Michal Prívozník
• Re: Set hostname of guest during installation time
  • From: john doe
• Re: Set hostname of guest during installation time
  • From: Andrea Bolognani
• Re: "configure: error: Unable to find <rpc/rpc.h>" when compiling libvirt 6.0.0 from a release tarball
  • From: Michal Prívozník
• Re: Set hostname of guest during installation time
  • From: Michal Prívozník
• Ovs error when starting vm: ovs-vsctl: 'del-port' command requires at least 1 arguments
  • From: Thomas Pircher
• Re: "configure: error: Unable to find <rpc/rpc.h>" when compiling libvirt 6.0.0 from a release tarball
  • From: FuLong Wang
• "configure: error: Unable to find <rpc/rpc.h>" when compiling libvirt 6.0.0 from a release tarball
  • From: FuLong Wang
• Masking out the Protected Processor Identification Number
  • From: procmem@xxxxxxxxxx
• Re: Set hostname of guest during installation time
  • From: john doe
• Re: Set hostname of guest during installation time
  • From: john doe
• Re: Set hostname of guest during installation time
  • From: Michal Prívozník
• Re: Set hostname of guest during installation time
  • From: john doe
• Re: Set hostname of guest during installation time
  • From: john doe
• Re: Set hostname of guest during installation time
  • From: Andrea Bolognani
• Re: Set hostname of guest during installation time
  • From: Michal Prívozník
• Re: Set hostname of guest during installation time
  • From: john doe
• Re: Set hostname of guest during installation time
  • From: Michal Prívozník
• Re: Set hostname of guest during installation time
  • From: Michal Prívozník
• Re: Escape character
  • From: john doe
• Re: Escape character
  • From: Ken D'Ambrosio
• Re: Escape character
  • From: Daniel P. Berrangé
• Re: Escape character
  • From: Ján Tomko
• Re: Escape character
  • From: Erik Skultety
• Set hostname of guest during installation time
  • From: john doe
• Re: Escape character
  • From: Daniel P. Berrangé
• Re: Escape character
  • From: john doe
• Re: Create VM w/ cache=none on tmpfs
  • From: Miguel Duarte de Mora Barroso
• Re: Escape character
  • From: Ján Tomko
• Re: Create VM w/ cache=none on tmpfs
  • From: Daniel P. Berrangé
• Escape character
  • From: john doe
• Create VM w/ cache=none on tmpfs
  • From: Miguel Duarte de Mora Barroso
• Re: Question about local migration between containers
  • From: Or Shoval
• Re: Question about local migration between containers
  • From: Daniel P. Berrangé
• Re: Question about local migration between containers
  • From: Or Shoval
• Re: protocol method available on Windows
  • From: john doe
• Re: Question about local migration between containers
  • From: Daniel P. Berrangé
• Re: protocol method available on Windows
  • From: Daniel P. Berrangé
• Question about local migration between containers
  • From: Or Shoval
• protocol method available on Windows
  • From: john doe
• Re: libvirt dynamic file ownership
  • From: Michal Prívozník
• RE: libvirt dynamic file ownership
  • From: Joe Muro
• how can i get enough mem stat detai from win7 vm with virtio-win driver install and blnsrv started ?
  • From: thomas.kuang
• Re: libvirt dynamic file ownership
  • From: Michal Prívozník
• Re: libvirt dynamic file ownership
  • From: Martin Kletzander
• Re: libvirt dynamic file ownership
  • From: Joe Muro
• Google Summer of Code - Redfish API implementation
  • From: GUOQING LI
• Fwd: KVM hook
  • From: Aditya Sahu
• Re: Could you please help with questions about the net failover feature
  • From: Laine Stump
• Could you please help with questions about the net failover feature
  • From: Yalan Zhang
• Re: libvirt dynamic file ownership
  • From: Martin Kletzander
• libvirt dynamic file ownership
  • From: Joe Muro
• Problems with libvirt for MIPS
  • From: Computers Issues
• Re[2]: pointer to "spice" device by virNodeDeviceLookupByName
  • From: Andrey Fokin
• Re: pointer to "spice" device by virNodeDeviceLookupByName
  • From: Daniel P. Berrangé
• Re[2]: pointer to "spice" device by virNodeDeviceLookupByName
  • From: Andrey Fokin
• Re: pointer to "spice" device by virNodeDeviceLookupByName
  • From: Daniel P. Berrangé
• pointer to "spice" device by virNodeDeviceLookupByName
  • From: Андрей Фокин
• Re: live storage migration using blockcopy
  • From: Peter Krempa
• live storage migration using blockcopy
  • From: Jing-Wei Su
• RE: snapshotting disk images with exchange db / volumes
  • From: Marc Roos
• Re: changing memory size with virsh setmem - results only visible in domain, not on host
  • From: Jim Fehlig
• KVM on CentOS 7 - sluggish performance with Win10 Guest
  • From: Benjammin2068
• changing memory size with virsh setmem - results only visible in domain, not on host
  • From: Lentes, Bernd
• snapshotting disk images with exchange db / volumes
  • From: Marc Roos
• Re: upgrading from fedora29 to fedora 31
  • From: Michal Prívozník
• upgrading from fedora29 to fedora 31
  • From: Thierry Parmentelat
• Re: Virtio-disk with driver from Microsoft from 2006 ?
  • From: Lentes, Bernd
• Guests automatically stuck on pause
  • From: JT Edwards
• Virtio-disk with driver from Microsoft from 2006 ?
  • From: Lentes, Bernd
• Re: kvm presenting wrong CPU Topology for cache
  • From: Satish Patel
• kvm presenting wrong CPU Topology for cache
  • From: Satish Patel
• Re: libvirtError: Timed out during operation: cannot acquire state change lock (held by monitor=remoteDispatchDomainMigratePerform3Params)
  • From: Blake Anderson
• Re: libvirtError: Timed out during operation: cannot acquire state change lock (held by monitor=remoteDispatchDomainMigratePerform3Params)
  • From: Peter Krempa
• libvirtError: Timed out during operation: cannot acquire state change lock (held by monitor=remoteDispatchDomainMigratePerform3Params)
  • From: Blake Anderson
• Windows guest stalls during reboot
  • From: Benjammin2068
• pci device vga added not showing
  • From: Barry Cisna
• Re: guest-fsfreeze-freeze freezes all mounted block devices
  • From: Daniel P. Berrangé
• RE: guest-fsfreeze-freeze freezes all mounted block devices
  • From: Marc Roos
• Re: build problem with libxl
  • From: Anthony PERARD
• Re: build problem with libxl
  • From: Ján Tomko
• Open Source Hackathon Mentorship Invitation
  • From: Misha Patel
• Re: guest-fsfreeze-freeze freezes all mounted block devices
  • From: Daniel P. Berrangé
• Re: build problem with libxl
  • From: Ján Tomko
• Re: build problem with libxl
  • From: Christoph
• Re: build problem with libxl
  • From: Ján Tomko
• Re: build problem with libxl
  • From: Christoph
• Re: build problem with libxl
  • From: Ján Tomko
• build problem with libxl
  • From: Christoph
• Re: Cannot turn iommu on inside guest
  • From: Mauricio Tavares
• Re: clustered lvm volume activation
  • From: Timm Wunderlich
• Re: clustered lvm volume activation
  • From: Guy Godfroy
• Re: can hotplug vcpus to running Windows 10 guest, but not unplug
  • From: Laine Stump
• RE: can hotplug vcpus to running Windows 10 guest, but not unplug
  • From: Marc Roos
• Re: can hotplug vcpus to running Windows 10 guest, but not unplug
  • From: Lentes, Bernd
• RE: guest-fsfreeze-freeze freezes all mounted block devices
  • From: Marc Roos
• Re: guest-fsfreeze-freeze freezes all mounted block devices
  • From: Peter Krempa
• RE: guest-fsfreeze-freeze freezes all mounted block devices
  • From: Marc Roos
• Re: guest-fsfreeze-freeze freezes all mounted block devices
  • From: Peter Krempa
• Re: Possible to use OVN networking and virtio simultaneously in the same VM?
  • From: Andre Goree
• Re: USB-hotplugging fails with "failed to load cgroup BPF prog: Operation not permitted" on cgroups v2
  • From: Pol Van Aubel
• Re: Possible to use OVN networking and virtio simultaneously in the same VM?
  • From: Gianluca Cecchi
• RE: can hotplug vcpus to running Windows 10 guest, but not unplug
  • From: Marc Roos
• Re: PCI/GPU Passthrough with xen
  • From: Jim Fehlig
• guest-fsfreeze-freeze freezes all mounted block devices
  • From: Marc Roos
• Possible to use OVN networking and virtio simultaneously in the same VM?
  • From: Andre Goree
• Re: can hotplug vcpus to running Windows 10 guest, but not unplug
  • From: Gianluca Cecchi
• Re: can hotplug vcpus to running Windows 10 guest, but not unplug
  • From: Lentes, Bernd
• Re: clustered lvm volume activation
  • From: Peter Krempa
• Re: can hotplug vcpus to running Windows 10 guest, but not unplug
  • From: Peter Krempa
• can hotplug vcpus to running Windows 10 guest, but not unplug
  • From: Lentes, Bernd
• Re: PCI/GPU Passthrough with xen
  • From: Christoph
• clustered lvm volume activation
  • From: Timm Wunderlich
• Re: ERROR Could not find an installable distribution at ....
  • From: Andrea Bolognani
• ERROR Could not find an installable distribution at ....
  • From: Kaushal Shriyan
• Re: problems with understanding of the memory parameters in the xml file
  • From: Peter Krempa
• problems with understanding of the memory parameters in the xml file
  • From: Lentes, Bernd
• Re: Cannot turn iommu on inside guest
  • From: Daniel P. Berrangé
• Cannot turn iommu on inside guest
  • From: Mauricio Tavares
• Re: does the guest have a snapshot ?
  • From: Lentes, Bernd
• Re: does the guest have a snapshot ?
  • From: Peter Krempa
• Re: does the guest have a snapshot ?
  • From: Lentes, Bernd
• Re: No DHCP on default network when guest has multiple interfaces
  • From: Michal Privoznik
• Re: does the guest have a snapshot ?
  • From: Peter Krempa
• does the guest have a snapshot ?
  • From: Lentes, Bernd
• No DHCP on default network when guest has multiple interfaces
  • From: Patrick O'Neill
• Re: PCI/GPU Passthrough with xen
  • From: Paul O'Rorke
• Re: PCI/GPU Passthrough with xen
  • From: Jim Fehlig
• Re: Does Libvirt's json parser support single quoted string in qmp json string?
  • From: John Snow
• Re: Does Libvirt's json parser support single quoted string in qmp json string?
  • From: Markus Armbruster
• Re: Does Libvirt's json parser support single quoted string in qmp json string?
  • From: Daniel P. Berrangé
• Re: Does Libvirt's json parser support single quoted string in qmp json string?
  • From: Daniel P. Berrangé
• Re: Does Libvirt's json parser support single quoted string in qmp json string?
  • From: Markus Armbruster
• Re: PCI/GPU Passthrough with xen
  • From: Christoph
• Re: Does Libvirt's json parser support single quoted string in qmp json string?
  • From: Eric Blake
• Re: USB devices with same vendor:product id
  • From: Pol Van Aubel
• Re: USB devices with same vendor:product id
  • From: Maxime Accadia
• Re: USB devices with same vendor:product id
  • From: Pol Van Aubel
• Re: USB devices with same vendor:product id
  • From: Ján Tomko
• USB devices with same vendor:product id
  • From: Maxime Accadia
• Re: Does Libvirt's json parser support single quoted string in qmp json string?
  • From: Daniel P. Berrangé
• Re: PCI/GPU Passthrough with xen
  • From: Jim Fehlig
• Re: Does Libvirt's json parser support single quoted string in qmp json string?
  • From: Eric Blake
• Re: Does Libvirt's json parser support single quoted string in qmp json string?
  • From: Peter Krempa
• Re: Does Libvirt's json parser support single quoted string in qmp json string?
  • From: Peter Luo
• Re: Does Libvirt's json parser support single quoted string in qmp json string?
  • From: Peter Krempa
• Does Libvirt's json parser support single quoted string in qmp json string?
  • From: Peter Luo
• PCI/GPU Passthrough with xen
  • From: Christoph
• Re: Detecting of features of VMs
  • From: Martin Kletzander
• Host CPU usage high on guest network load (macvtap).
  • From: André Malm
• Emulation packages for Centos8
  • From: Mauricio Tavares
• NFS and unsafe migration
  • From: Gionatan Danti
• Re: KVM not available on system bus
  • From: Kasper Laudrup
• Detecting of features of VMs
  • From: Peter Krempa
• Re: qemu hook: event for source host too
  • From: Guy Godfroy
• VM crash, partitiontable deleted CPU 1/KVM[2867866]: segfault at 2 ip 0000560cffe03757 sp 00007f0e8babaeb0 error 4 in qemu-system-x86_64
  • From: Oliver Dzombic
• VM crash, partitiontable deleted CPU 1/KVM[2867866]: segfault at 2 ip 0000560cffe03757 sp 00007f0e8babaeb0 error 4 in qemu-system-x86_64
  • From: Oliver Dzombic
• Re: Prevent the firewall from being compromised through libvirtd
  • From: Daniel P. Berrangé
• Re: KVM not available on system bus
  • From: Michal Prívozník
• KVM not available on system bus
  • From: Kasper Laudrup
• Prevent the firewall from being compromised through libvirtd
  • From: Thomas Luening
• Re: qemu hook: event for source host too
  • From: Michal Privoznik
• Re: qemu hook: event for source host too
  • From: Guy Godfroy
• Re: qemu hook: event for source host too
  • From: Michal Privoznik
• Repetitive RBD disk definitions
  • From: wferi
• Re: qemu hook: event for source host too
  • From: Guy Godfroy
• Re: virsh vol-download uses a lot of memory
  • From: Daniel P. Berrangé
• Re: virsh vol-download uses a lot of memory
  • From: Michal Privoznik
• Re: virsh vol-download uses a lot of memory
  • From: R. Diez
• Re: virsh vol-download uses a lot of memory
  • From: R. Diez
• Re: virsh vol-download uses a lot of memory
  • From: Peter Crowther
• Re: virsh vol-download uses a lot of memory
  • From: Daniel P. Berrangé
• Re: virsh vol-download uses a lot of memory
  • From: Michal Privoznik
• Re: How to detect completion of a paused VM migration on the destination?
  • From: Milan Zamazal
• Testing mail delivery
  • From: dberrange@xxxxxxxxx
• Re: virsh vol-download uses a lot of memory
  • From: Michal Privoznik
• Re: qemu hook: event for source host too
  • From: Guy Godfroy
• Re: qemu hook: event for source host too
  • From: Michal Privoznik
• virsh vol-download uses a lot of memory
  • From: R. Diez
• Re: qemu hook: event for source host too
  • From: Guy Godfroy
• Re: qemu hook: event for source host too
  • From: Michal Privoznik
• Re: How to detect completion of a paused VM migration on the destination?
  • From: Michal Privoznik
• Re: USB-hotplugging fails with "failed to load cgroup BPF prog: Operation not permitted" on cgroups v2
  • From: Pol Van Aubel
• How to detect completion of a paused VM migration on the destination?
  • From: Milan Zamazal
• Re: USB-hotplugging fails with "failed to load cgroup BPF prog: Operation not permitted" on cgroups v2
  • From: Pavel Hrdina
• qemu hook: event for source host too
  • From: Guy Godfroy
• Re: Connecting a VM to an existing OVS bridge
  • From: Amir Sela
• Re: USB-hotplugging fails with "failed to load cgroup BPF prog: Operation not permitted" on cgroups v2
  • From: Pavel Hrdina
• USB-hotplugging fails with "failed to load cgroup BPF prog: Operation not permitted" on cgroups v2
  • From: Pol Van Aubel
• Prevent virsh live migration from copy zero -- increment copy on live migration possible ?
  • From: Oliver Dzombic
• Re: Bridge-less VM
  • From: Laine Stump
• Re: Volume file permissions and huge volume downloads
  • From: Martin Kletzander
• Volume file permissions and huge volume downloads
  • From: R. Diez
• Re: Connecting a VM to an existing OVS bridge
  • From: Saso Tavcar
• Re: error: internal error: unable to execute QEMU command 'blockdev-mirror': Cannot find device= nor node_name=
  • From: Peter Krempa
• Re: Reload domain configuration on guest restart
  • From: Gionatan Danti
• error: internal error: unable to execute QEMU command 'blockdev-mirror': Cannot find device= nor node_name=
  • From: Oliver Dzombic
• Bridge-less VM
  • From: Rob Roschewsk
• Re: Reload domain configuration on guest restart
  • From: Daniel P. Berrangé
• Reload domain configuration on guest restart
  • From: Gionatan Danti
• Re: libvirt-python: issue on fedora
  • From: Matthias Tafelmeier
• Re: libvirt-python: issue on fedora
  • From: Matthias Tafelmeier
• Re: libvirt-python: issue on fedora
  • From: Matthias Tafelmeier
• Re: libvirt-python: issue on fedora
  • From: Daniel P. Berrangé
• Re: libvirt-python: issue on fedora
  • From: Matthias Tafelmeier
• Re: libvirt-python: issue on fedora
  • From: Daniel P. Berrangé
• libvirt-python: issue on fedora
  • From: Matthias Tafelmeier
• Re: [libvirt] FYI: intention to remove mail subject prefix & footer text
  • From: Daniel P. Berrangé
• Re: error: internal error: Unable to parse 'rbps=max wbps=max riops=100 wiops=max' as an integer
  • From: Pavel Hrdina
• error: internal error: Unable to parse 'rbps=max wbps=max riops=100 wiops=max' as an integer
  • From: Oliver Dzombic
• Re: Connecting a VM to an existing OVS bridge
  • From: Laine Stump
• FYI: intention to remove mail subject prefix & footer text
  • From: Daniel P. Berrangé
• Re: Fwd: (no subject)
  • From: Eyüp Hakan Duran
• Support statement on Nested virtualization
  • From: prabhu padashetty
• Re: Locking without virtlockd (nor sanlock)?
  • From: Gionatan Danti
• Re: aarch64 vm doesn't boots
  • From: daggs
• Re: Fwd: (no subject)
  • From: Peter Krempa
• Re: aarch64 vm doesn't boots
  • From: Andrea Bolognani
• Re: Locking without virtlockd (nor sanlock)?
  • From: Peter Krempa
• Re: aarch64 vm doesn't boots
  • From: daggs
• Fwd: (no subject)
  • From: Eyüp Hakan Duran
• Re: Locking without virtlockd (nor sanlock)?
  • From: Gionatan Danti
• Connecting a VM to an existing OVS bridge
  • From: Amir Sela
• Re: aarch64 vm doesn't boots
  • From: Andrea Bolognani
• Re: Locking without virtlockd (nor sanlock)?
  • From: Peter Krempa
• Re: (no subject)
  • From: Peter Krempa
• (no subject)
  • From: Eyüp Hakan Duran
• Re: Locking without virtlockd (nor sanlock)?
  • From: Daniel P. Berrangé
• Re: Locking without virtlockd (nor sanlock)?
  • From: Gionatan Danti
• Re: Locking without virtlockd (nor sanlock)?
  • From: Daniel P. Berrangé
• Re: Locking without virtlockd (nor sanlock)?
  • From: Gionatan Danti
• Re: [Xen] + [Libvirt] + [TPM]: can it work?
  • From: Jim Fehlig
• Re: Passing multiple addresses with masks to nwfilter
  • From: Brooks Swinnerton
• Re: Passing multiple addresses with masks to nwfilter
  • From: Brooks Swinnerton
• Passing multiple addresses with masks to nwfilter
  • From: Brooks Swinnerton
• [Xen] + [Libvirt] + [TPM]: can it work?
  • From: Arthur Borsboom
• Re: Locking without virtlockd (nor sanlock)?
  • From: Gionatan Danti
• Locking without virtlockd (nor sanlock)?
  • From: Gionatan Danti
• aarch64 vm doesn't boots
  • From: daggs
• Re: (no subject)
  • From: Michal Prívozník
• Re: [libvirt] Add support for vhost-user-scsi-pci/vhost-user-blk-pci
  • From: Cole Robinson
• (no subject)
  • From: Mauricio Tavares
• Re: Error in launching chasis
  • From: Laine Stump
• Re: Change in treatment of qcow2 with chained backing files in v5.10.0?
  • From: Jens John
• Error in launching chasis
  • From: abhishek jain
• Re: Change in treatment of qcow2 with chained backing files in v5.10.0?
  • From: Peter Krempa
• Re: Request to be allotted a project or a feature in pipeline
  • From: Michal Privoznik
• Request to be allotted a project or a feature in pipeline
  • From: Utsav Parmar
• Change in treatment of qcow2 with chained backing files in v5.10.0?
  • From: Jens John
• Re: nvme, spdk and host linux version
  • From: Michal Privoznik
• Re: nvme, spdk and host linux version
  • From: Mauricio Tavares
• Re: nvme, spdk and host linux version
  • From: Michal Privoznik
• Re: nvme, spdk and host linux version
  • From: Ján Tomko
• Re: nvme, spdk and host linux version
  • From: Cole Robinson
• Re: What's the best way to make use of VLAN interfaces with VMs?
  • From: Richard Achmatowicz
• Re: What's the best way to make use of VLAN interfaces with VMs?
  • From: Richard Achmatowicz
• Re: Converting LVM to qcow2
  • From: Marcin Mirosław
• Re: What's the best way to make use of VLAN interfaces with VMs?
  • From: Richard Achmatowicz
• Re: Live migrate with virsh migrate
  • From: Marc Roos
• Re: Live migrate with virsh migrate
  • From: Peter Krempa
• Live migrate with virsh migrate
  • From: Marc Roos
• Re: Domain XML Multicast Tunnel
  • From: Daniel P. Berrangé
• Domain XML Multicast Tunnel
  • From: Richard M
• Re: Converting LVM to qcow2
  • From: ort_libvirt
• Re: Converting LVM to qcow2
  • From: Peter Krempa
• Converting LVM to qcow2
  • From: ort_libvirt
• Re: What's the best way to make use of VLAN interfaces with VMs?
  • From: Richard Achmatowicz
• Re: What's the best way to make use of VLAN interfaces with VMs?
  • From: Laine Stump
• nvme, spdk and host linux version
  • From: Mauricio Tavares
• Re: Fail to build upstream libvirt on rhel8
  • From: Daniel P. Berrangé
• What's the best way to make use of VLAN interfaces with VMs?
  • From: Richard Achmatowicz
• Re: Fail to build upstream libvirt on rhel8
  • From: Cole Robinson
• Re: Getting "Unable to set XATTR" on libvirt 5.6.0 inside containers
  • From: Roman Mohr
• Re: Getting "Unable to set XATTR" on libvirt 5.6.0 inside containers
  • From: Michal Privoznik
• Getting "Unable to set XATTR" on libvirt 5.6.0 inside containers
  • From: Roman Mohr
• Fail to build upstream libvirt on rhel8
  • From: Han Han
• Re: virsh snapshot-create --print-xml seems to ignore most arguments
  • From: Eric Blake
• virsh snapshot-create --print-xml seems to ignore most arguments
  • From: Timo Schneider
• Re: FYI mail problems for libvirt lists
  • From: Daniel P. Berrangé
• Re: Descriptions of mdev types?
  • From: Daniel P. Berrangé
• Re: Descriptions of mdev types?
  • From: Milan Zamazal
• Re: Descriptions of mdev types?
  • From: Erik Skultety
• Descriptions of mdev types?
  • From: Milan Zamazal
• FYI mail problems for libvirt lists
  • From: Daniel P. Berrangé
• Re: libvirt_lxc memory limit, emulator process part of the cgroup?
  • From: Cole Robinson
• Re: Understanding the use of virt-install from the CLI (Linux)
  • From: jonetsu
• Re: Understanding the use of virt-install from the CLI (Linux)
  • From: jonetsu
• Re: Understanding the use of virt-install from the CLI (Linux)
  • From: Timo Lindfors
• Re: Understanding the use of virt-install from the CLI (Linux)
  • From: Pavel Hrdina
• Understanding the use of virt-install from the CLI (Linux)
  • From: jonetsu
• Re: Where can I find the slirp-helper?
  • From: Han Han
• Re: Where can I find the slirp-helper?
  • From: Yukin Chan
• Where can I find the slirp-helper?
  • From: Han Han
• Re: 32 bit support
  • From: Phill. Whiteside
• Re: It takes long time to start kvm virtual machine with nwfilter in docker container.
  • From: John Y.
• Re: It takes long time to start kvm virtual machine with nwfilter in docker container.
  • From: Daniel P. Berrangé