Libvirt Users

• Thread Index

• Re: Passing multiple addresses with masks to nwfilter
  • From: Brooks Swinnerton
• Passing multiple addresses with masks to nwfilter
  • From: Brooks Swinnerton
• [Xen] + [Libvirt] + [TPM]: can it work?
  • From: Arthur Borsboom
• Re: Locking without virtlockd (nor sanlock)?
  • From: Gionatan Danti
• Locking without virtlockd (nor sanlock)?
  • From: Gionatan Danti
• aarch64 vm doesn't boots
  • From: daggs
• Re: (no subject)
  • From: Michal Prívozník
• Re: [libvirt] Add support for vhost-user-scsi-pci/vhost-user-blk-pci
  • From: Cole Robinson
• (no subject)
  • From: Mauricio Tavares
• Re: Error in launching chasis
  • From: Laine Stump
• Re: Change in treatment of qcow2 with chained backing files in v5.10.0?
  • From: Jens John
• Error in launching chasis
  • From: abhishek jain
• Re: Change in treatment of qcow2 with chained backing files in v5.10.0?
  • From: Peter Krempa
• Re: Request to be allotted a project or a feature in pipeline
  • From: Michal Privoznik
• Request to be allotted a project or a feature in pipeline
  • From: Utsav Parmar
• Change in treatment of qcow2 with chained backing files in v5.10.0?
  • From: Jens John
• Re: nvme, spdk and host linux version
  • From: Michal Privoznik
• Re: nvme, spdk and host linux version
  • From: Mauricio Tavares
• Re: nvme, spdk and host linux version
  • From: Michal Privoznik
• Re: nvme, spdk and host linux version
  • From: Ján Tomko
• Re: nvme, spdk and host linux version
  • From: Cole Robinson
• Re: What's the best way to make use of VLAN interfaces with VMs?
  • From: Richard Achmatowicz
• Re: What's the best way to make use of VLAN interfaces with VMs?
  • From: Richard Achmatowicz
• Re: Converting LVM to qcow2
  • From: Marcin Mirosław
• Re: What's the best way to make use of VLAN interfaces with VMs?
  • From: Richard Achmatowicz
• Re: Live migrate with virsh migrate
  • From: Marc Roos
• Re: Live migrate with virsh migrate
  • From: Peter Krempa
• Live migrate with virsh migrate
  • From: Marc Roos
• Re: Domain XML Multicast Tunnel
  • From: Daniel P. Berrangé
• Domain XML Multicast Tunnel
  • From: Richard M
• Re: Converting LVM to qcow2
  • From: ort_libvirt
• Re: Converting LVM to qcow2
  • From: Peter Krempa
• Converting LVM to qcow2
  • From: ort_libvirt
• Re: What's the best way to make use of VLAN interfaces with VMs?
  • From: Richard Achmatowicz
• Re: What's the best way to make use of VLAN interfaces with VMs?
  • From: Laine Stump
• nvme, spdk and host linux version
  • From: Mauricio Tavares
• Re: Fail to build upstream libvirt on rhel8
  • From: Daniel P. Berrangé
• What's the best way to make use of VLAN interfaces with VMs?
  • From: Richard Achmatowicz
• Re: Fail to build upstream libvirt on rhel8
  • From: Cole Robinson
• Re: Getting "Unable to set XATTR" on libvirt 5.6.0 inside containers
  • From: Roman Mohr
• Re: Getting "Unable to set XATTR" on libvirt 5.6.0 inside containers
  • From: Michal Privoznik
• Getting "Unable to set XATTR" on libvirt 5.6.0 inside containers
  • From: Roman Mohr
• Fail to build upstream libvirt on rhel8
  • From: Han Han
• Re: virsh snapshot-create --print-xml seems to ignore most arguments
  • From: Eric Blake
• virsh snapshot-create --print-xml seems to ignore most arguments
  • From: Timo Schneider
• Re: FYI mail problems for libvirt lists
  • From: Daniel P. Berrangé
• Re: Descriptions of mdev types?
  • From: Daniel P. Berrangé
• Re: Descriptions of mdev types?
  • From: Milan Zamazal
• Re: Descriptions of mdev types?
  • From: Erik Skultety
• Descriptions of mdev types?
  • From: Milan Zamazal
• FYI mail problems for libvirt lists
  • From: Daniel P. Berrangé
• Re: libvirt_lxc memory limit, emulator process part of the cgroup?
  • From: Cole Robinson
• Re: Understanding the use of virt-install from the CLI (Linux)
  • From: jonetsu
• Re: Understanding the use of virt-install from the CLI (Linux)
  • From: jonetsu
• Re: Understanding the use of virt-install from the CLI (Linux)
  • From: Timo Lindfors
• Re: Understanding the use of virt-install from the CLI (Linux)
  • From: Pavel Hrdina
• Understanding the use of virt-install from the CLI (Linux)
  • From: jonetsu
• Re: Where can I find the slirp-helper?
  • From: Han Han
• Re: Where can I find the slirp-helper?
  • From: Yukin Chan
• Where can I find the slirp-helper?
  • From: Han Han
• Re: 32 bit support
  • From: Phill. Whiteside
• Re: It takes long time to start kvm virtual machine with nwfilter in docker container.
  • From: John Y.
• Re: It takes long time to start kvm virtual machine with nwfilter in docker container.
  • From: Daniel P. Berrangé
• It takes long time to start kvm virtual machine with nwfilter in docker container.
  • From: John Y.
• Memory ballooning
  • From: Mauricio Tavares
• libvirt_lxc memory limit, emulator process part of the cgroup?
  • From: Maximilian Philipps
• Re: win10 vm stuck in automatic repair
  • From: Jack Kamm
• Re: Reg: Adding "edu" device using XML file
  • From: bharath paulraj
• Re: Reg: Adding "edu" device using XML file
  • From: Han Han
• Re: Confused setting up a "Virtual Server Hosting" config
  • From: Paul O'Rorke
• Re: Confused setting up a "Virtual Server Hosting" config
  • From: Laine Stump
• Re: Reg: Adding "edu" device using XML file
  • From: bharath paulraj
• Re: Reg: Adding "edu" device using XML file
  • From: Han Han
• Confused setting up a "Virtual Server Hosting" config
  • From: Paul O'Rorke
• win10 vm stuck in automatic repair
  • From: Jack Kamm
• Re: 32 bit support
  • From: Daniel P. Berrangé
• 32 bit support
  • From: Phill. Whiteside
• Re: Live migrate + change interface name
  • From: Marc Roos
• Reg: Adding "edu" device using XML file
  • From: bharath paulraj
• Re: Live migrate + change interface name
  • From: Laine Stump
• Re: X11 apps on lxc
  • From: Daniel P. Berrangé
• X11 apps on lxc
  • From: Jesus
• [libvirt]Some questions about live migration
  • From: Luyao Zhong
• Re: [libvirt] Some questions about live migration
  • From: Jiri Denemark
• Live migrate + change interface name
  • From: Marc Roos
• Re: Transient permission denied errors when sending audit logs
  • From: Roman Mohr
• Re: Transient permission denied errors when sending audit logs
  • From: Daniel P. Berrangé
• Transient permission denied errors when sending audit logs
  • From: Roman Mohr
• Re: create virtual network fails with virt-manager
  • From: Marko Horn
• Re: [libvirt] Add support for vhost-user-scsi-pci/vhost-user-blk-pci
  • From: Li Feng
• Re: [libvirt] Add support for vhost-user-scsi-pci/vhost-user-blk-pci
  • From: Li Feng
• Re: [libvirt] Add support for vhost-user-scsi-pci/vhost-user-blk-pci
  • From: Cole Robinson
• Re: create virtual network fails with virt-manager
  • From: Martin Kletzander
• Re: Libvirt-QEMU : Multiplex the output from qemu's serial port to a pty as well as a file (basically redirect console to file as well as pty device)
  • From: gokul cg
• Fwd: Libvirt-QEMU : Multiplex the output from qemu's serial port to a pty as well as a file (basically redirect console to file as well as pty device)
  • From: gokul cg
• Fwd: Libvirt-QEMU : Multiplex the output from qemu's serial port to a pty as well as a file (basically redirect console to file as well as pty device)
  • From: gokul cg
• create virtual network fails with virt-manager
  • From: Marko Horn
• Using encrypted volumes
  • From: Dominik Reusser
• Re: [libvirt] Add support for vhost-user-scsi-pci/vhost-user-blk-pci
  • From: Cole Robinson
• Re: hidden state='on' not working
  • From: Michael Lipp
• Re: hidden state='on' not working
  • From: Cole Robinson
• hidden state='on' not working
  • From: Michael Lipp
• Re: Emulated TPM doesn't work on Debian Buster
  • From: Andrea Bolognani
• Re: Emulated TPM doesn't work on Debian Buster
  • From: procmem@xxxxxxxxxx
• Re: Emulated TPM doesn't work on Debian Buster
  • From: procmem@xxxxxxxxxx
• Re: Error validating install location: Distro 'rhel8' does not exist in our dictionary
  • From: Andrea Bolognani
• Re: Emulated TPM doesn't work on Debian Buster
  • From: Martin Kletzander
• Re: Error validating install location: Distro 'rhel8' does not exist in our dictionary
  • From: Martin Kletzander
• Re: Emulated TPM doesn't work on Debian Buster
  • From: Andrea Bolognani
• Re: Error validating install location: Distro 'rhel8' does not exist in our dictionary
  • From: Kaushal Shriyan
• Emulated TPM doesn't work on Debian Buster
  • From: procmem@xxxxxxxxxx
• Re: Error validating install location: Distro 'rhel8' does not exist in our dictionary
  • From: Oliver Dzombic
• Error validating install location: Distro 'rhel8' does not exist in our dictionary
  • From: Kaushal Shriyan
• Re: Internal error reported by libvirt while creating a VM
  • From: Andrea Bolognani
• network namespace for multiple overlapping nat networks?
  • From: Fred Clift
• Re: Internal error reported by libvirt while creating a VM
  • From: Andrea Bolognani
• Re: Internal error reported by libvirt while creating a VM
  • From: Andrea Bolognani
• Internal error reported by libvirt while creating a VM
  • From: Ajay Kumar
• experience with balloon memory ?
  • From: Lentes, Bernd
• Re: Privacy Extension not working in VM
  • From: Thomas Luening
• Re: Certificate checking on TLS migrations to an IP address
  • From: Daniel P. Berrangé
• Re: Certificate checking on TLS migrations to an IP address
  • From: Milan Zamazal
• Re: Privacy Extension not working in VM
  • From: Daniel P. Berrangé
• Re: VM cloning with memory state
  • From: Peter Krempa
• VM cloning with memory state
  • From: Benny Zlotnik
• Privacy Extension not working in VM
  • From: Thomas Luening
• Re: Certificate checking on TLS migrations to an IP address
  • From: Milan Zamazal
• Re: Certificate checking on TLS migrations to an IP address
  • From: Daniel P. Berrangé
• Re: Live-Migration not possible: error: operation failed: guest CPU doesn't match specification
  • From: Ján Tomko
• Live-Migration not possible: error: operation failed: guest CPU doesn't match specification
  • From: Lentes, Bernd
• Re: Certificate checking on TLS migrations to an IP address
  • From: Milan Zamazal
• Re: virsh -c lxc:/// setvcpus and <vcpu> configuration fails
  • From: Oliver Dzombic
• Re: virsh -c lxc:/// setvcpus and <vcpu> configuration fails
  • From: Martin Kletzander
• virsh -c lxc:/// setvcpus and <vcpu> configuration fails
  • From: info
• Re: About vhost-user-blk support
  • From: Su Hua
• Disk backup for live and offline domains
  • From: Tim Schumacher
• Re: About vhost-user-blk support
  • From: Cole Robinson
• Re: About vhost-user-blk support
  • From: Su Hua
• Re: About vhost-user-blk support
  • From: HUA SU
• Re: Disk backup for live and offline domains
  • From: Brandon Doyle
• Re: Disk backup for live and offline domains
  • From: Daniel Romero
• Disk backup for live and offline domains
  • From: Tim Schumacher
• Re: About vhost-user-blk support
  • From: Cole Robinson
• Reg: <operation not permitted><netlink socket><Qemu device>
  • From: bharath paulraj
• Re: could not create snapshotxml on encryption image
  • From: Peter Krempa
• could not create snapshotxml on encryption image
  • From: 18781374080
• Re: Recover snapshots from qcow images
  • From: Petr Stodulka
• Re: Certificate checking on TLS migrations to an IP address
  • From: Milan Zamazal
• Re: Certificate checking on TLS migrations to an IP address
  • From: Daniel P. Berrangé
• Certificate checking on TLS migrations to an IP address
  • From: Milan Zamazal
• Re: KVM NAT stops from working
  • From: Daniel Romero
• Re: KVM NAT stops from working
  • From: Francesc Guasch
• Re: KVM NAT stops from working
  • From: Laine Stump
• KVM NAT stops from working
  • From: Francesc Guasch
• Re: virsh list -all zombies
  • From: ofoerster
• virsh list -all zombies
  • From: ofoerster
• [libvirtd] qemu_process: reset CPU affinity to all enabled CPUs, when runs in custom cpuset
  • From: Valentina Krasnobaeva
• About vhost-user-blk support
  • From: Su Hua
• Re: CPU and Memory requirements for host OS ( CentOS 7.6) on Dell Poweredge R630 server
  • From: Peter Crowther
• Re: CPU and Memory requirements for host OS ( CentOS 7.6) on Dell Poweredge R630 server
  • From: Kaushal Shriyan
• Re: CPU and Memory requirements for host OS ( CentOS 7.6) on Dell Poweredge R630 server
  • From: Sven Schwedas
• CPU and Memory requirements for host OS ( CentOS 7.6) on Dell Poweredge R630 server
  • From: Kaushal Shriyan
• Re: RLIMIT_MEMLOCK in container environment
  • From: Laine Stump
• Re: RLIMIT_MEMLOCK in container environment
  • From: Dan Kenigsberg
• Re: RLIMIT_MEMLOCK in container environment
  • From: Laine Stump
• Re: RLIMIT_MEMLOCK in container environment
  • From: Ihar Hrachyshka
• Re: RLIMIT_MEMLOCK in container environment
  • From: Laine Stump
• Re: RLIMIT_MEMLOCK in container environment
  • From: Ihar Hrachyshka
• Re: RLIMIT_MEMLOCK in container environment
  • From: Daniel P. Berrangé
• RLIMIT_MEMLOCK in container environment
  • From: Ihar Hrachyshka
• Re: Compiling Libvirt on Windows for Hyper V support
  • From: reza shahriari
• Re: Compiling Libvirt on Windows for Hyper V support
  • From: reza shahriari
• Re: Compiling Libvirt on Windows for Hyper V support
  • From: reza shahriari
• Re: Compiling Libvirt on Windows for Hyper V support
  • From: Daniel P. Berrangé
• Re: Compiling Libvirt on Windows for Hyper V support
  • From: Daniel P. Berrangé
• Re: Compiling Libvirt on Windows for Hyper V support
  • From: reza shahriari
• Re: Compiling Libvirt on Windows for Hyper V support
  • From: Daniel P. Berrangé
• Re: Starting VM fails with: "Setting different DAC user or group on /path... which is already in use" after upgrading to libvirt 5.6.0-1
  • From: Nir Soffer
• Re: Compiling Libvirt on Windows for Hyper V support
  • From: Daniel P. Berrangé
• Re: Compiling Libvirt on Windows for Hyper V support
  • From: Daniel P. Berrangé
• Re: Compiling Libvirt on Windows for Hyper V support
  • From: reza shahriari
• Re: Starting VM fails with: "Setting different DAC user or group on /path... which is already in use" after upgrading to libvirt 5.6.0-1
  • From: Michal Privoznik
• Re: Compiling Libvirt on Windows for Hyper V support
  • From: Erik Skultety
• Starting VM fails with: "Setting different DAC user or group on /path... which is already in use" after upgrading to libvirt 5.6.0-1
  • From: Nir Soffer
• Compiling Libvirt on Windows for Hyper V support
  • From: reza shahriari
• Re: Libvirt API for attaching volume to domain
  • From: Peter Krempa
• Re: Libvirt API for attaching volume to domain
  • From: Christian Kujau
• Re: Libvirt API for attaching volume to domain
  • From: Varsha Verma
• Re: Libvirt API for attaching volume to domain
  • From: Peter Krempa
• Libvirt API for attaching volume to domain
  • From: Varsha Verma
• Re: Recover snapshots from qcow images
  • From: Peter Krempa
• Recover snapshots from qcow images
  • From: Petr Stodulka
• Re: does virsh have a history with timestamps ?
  • From: Peter Krempa
• does virsh have a history with timestamps ?
  • From: Lentes, Bernd
• Add support for vhost-user-scsi-pci/vhost-user-blk-pci
  • From: Li Feng
• Re: OVS / KVM / libvirt / MTU
  • From: Sven Vogel
• Re: Vm in state "in shutdown"
  • From: 马昊骢 Ianmalcolm Ma
• Re: libvirt/dnsmasq is not adhering to static DHCP assignments
  • From: Christian Kujau
• Re: OVS / KVM / libvirt / MTU
  • From: Peter Crowther
• Re: OVS / KVM / libvirt / MTU
  • From: Sven Vogel
• Re: Reg: content of disk is not reflecting in host.
  • From: bharath paulraj
• Re: Reg: content of disk is not reflecting in host.
  • From: Daniel P. Berrangé
• Reg: content of disk is not reflecting in host.
  • From: bharath paulraj
• Re: Vm in state "in shutdown"
  • From: Michal Prívozník
• Vm in state "in shutdown"
  • From: 马昊骢 Ianmalcolm Ma
• Dev wanted regarding Ceph and/or libxl related bugs and feature requests
  • From: Julian Sternberg
• Re: Detach disk from VM - virsh (working) vs. PHP (not working)
  • From: Jan Horak
• Re: Detach disk from VM - virsh (working) vs. PHP (not working)
  • From: Michal Prívozník
• Re: Detach disk from VM - virsh (working) vs. PHP (not working)
  • From: Jan Horak
• Re: Detach disk from VM - virsh (working) vs. PHP (not working)
  • From: Michal Privoznik
• Re: Detach disk from VM - virsh (working) vs. PHP (not working)
  • From: Martin Kletzander
• Detach disk from VM - virsh (working) vs. PHP (not working)
  • From: Jan Horak
• Re: libvirt/dnsmasq is not adhering to static DHCP assignments
  • From: Michal Privoznik
• Re: Researching why different cache modes result in 'some' guest filesystem corruption..
  • From: Michal Privoznik
• Re: Why librbd disallow VM live migration if the disk cache mode is not none or directsync
  • From: Ming-Hung Tsai
• libvirt/dnsmasq is not adhering to static DHCP assignments
  • From: Christian Kujau
• Re: OVS / KVM / libvirt / MTU
  • From: Alvin Starr
• Re: OVS / KVM / libvirt / MTU
  • From: Michal Privoznik
• Researching why different cache modes result in 'some' guest filesystem corruption..
  • From: vincent
• Re: Libvirt Virtualization Problem
  • From: Daniel P. Berrangé
• Libvirt Virtualization Problem
  • From: 王金磊
• Re: virsh command to list CPU,Memory and Storage
  • From: Peter Krempa
• Re: virsh command to list CPU,Memory and Storage
  • From: Erik Skultety
• Re: OVS / KVM / libvirt / MTU
  • From: Sven Vogel
• virsh command to list CPU,Memory and Storage
  • From: Kaushal Shriyan
• Re: Why librbd disallow VM live migration if the disk cache mode is not none or directsync
  • From: Michal Privoznik
• Re: OVS / KVM / libvirt / MTU
  • From: Michal Privoznik
• Re: Why librbd disallow VM live migration if the disk cache mode is not none or directsync
  • From: Ming-Hung Tsai
• Why librbd disallow VM live migration if the disk cache mode is not none or directsync
  • From: Ming-Hung Tsai
• Re: <VM LIVE Migration> <Sync conntrack entries>
  • From: Daniel P. Berrangé
• <VM LIVE Migration> <Sync conntrack entries>
  • From: bharath paulraj
• Define libvirt network portgroup with native untagged.
  • From: Tanmoy Sinha
• OVS / KVM / libvirt / MTU
  • From: Sven Vogel
• Re: make install libvirt v5.5.0 failed
  • From: Erik Skultety
• Re: make install libvirt v5.5.0 failed
  • From: netsurfed
• Re: Installing QEMU from source causing error
  • From: Andrea Bolognani
• Re: virsh edit has no impact on domain
  • From: Andrea Bolognani
• Re: Installing QEMU from source causing error
  • From: Probir Roy
• Re: Installing QEMU from source causing error
  • From: Probir Roy
• virsh edit has no impact on domain
  • From: Probir Roy
• Re: Installing QEMU from source causing error
  • From: Daniel P. Berrangé
• Installing QEMU from source causing error
  • From: Probir Roy
• Re: domain xml questions
  • From: Vasiliy Tolstov
• Re: domain xml questions
  • From: Daniel P. Berrangé
• Re: Preloading shared library with libVirt
  • From: Daniel P. Berrangé
• Re: Preloading shared library with libVirt
  • From: Peter Krempa
• Preloading shared library with libVirt
  • From: Probir Roy
• domain xml questions
  • From: Vasiliy Tolstov
• make install libvirt v5.5.0 failed
  • From: netsurfed
• libvirtd failing on MacOS in setgroups
  • From: Marcus Furlong
• Re: filesharing file owner problem
  • From: Michal Privoznik
• filesharing file owner problem
  • From: Vojto Ľach
• Re: Question regarding using multiple physical functions inside a network pool.
  • From: Michal Privoznik
• Question regarding using multiple physical functions inside a network pool.
  • From: Mohamed, Faris
• Re: Strange issues with libvirt v5.5.0
  • From: Julian Sternberg
• Re: Strange issues with libvirt v5.5.0
  • From: Ján Tomko
• Re: Strange issues with libvirt v5.5.0
  • From: Peter Krempa
• Re: UDP broadcasts vs. nat Masquerading issue
  • From: Daniel P. Berrangé
• Re: UDP broadcasts vs. nat Masquerading issue
  • From: Nikolai Zhubr
• Re: UDP broadcasts vs. nat Masquerading issue
  • From: Laine Stump
• Re: libvirt-python Create External Snapshot
  • From: Peter Krempa
• Re: Blockpull while domain is shutoff
  • From: Peter Krempa
• libvirt-python blockPull
  • From: Roger Jin
• libvirt-python Create External Snapshot
  • From: Roger Jin
• Blockpull while domain is shutoff
  • From: Roger Jin
• Re: macvtap vlan and tcp header overhead (and mtu size)
  • From: Vincent Bernat
• UDP broadcasts vs. nat Masquerading issue
  • From: Nikolai Zhubr
• macvtap vlan and tcp header overhead (and mtu size)
  • From: Marc Roos
• Re: mkfs fails on qemu-nbd device
  • From: Tanmoy Sinha
• Re: mkfs fails on qemu-nbd device
  • From: Peter Krempa
• mkfs fails on qemu-nbd device
  • From: Tanmoy Sinha
• Intermittent live migration hang with ceph RBD attached volume
  • From: Scott Sullivan
• libvirtd does not update VM .xml configuration on filesystem after virsh blockcommit
  • From: Saso Tavcar
• Re: libvirtd does not update VM .xml configurations on filesystem after virsh snapshot/blockcommit
  • From: Peter Krempa
• libvirtd does not update VM .xml configurations on filesystem after virsh snapshot/blockcommit
  • From: Saso Tavcar
• Re: Libvirt API for getting disk capacity from VM XML
  • From: Martin Kletzander
• Re: blockcommit of domain not successfull
  • From: Lentes, Bernd
• Libvirt API for getting disk capacity from VM XML
  • From: Varsha Verma
• Re: blockcommit of domain not successfull
  • From: Peter Krempa
• Re: blockcommit of domain not successfull
  • From: Lentes, Bernd
• Re: blockcommit of domain not successfull
  • From: Lentes, Bernd
• Re: Using qemu active blockcommit results in 'Permission denied' error
  • From: Marcus Hoffmann
• Re: Using qemu active blockcommit results in 'Permission denied' error
  • From: Peter Krempa
• Re: blockcommit of domain not successfull
  • From: Peter Krempa
• Re: blockcommit of domain not successfull
  • From: Lentes, Bernd
• Re: Using qemu active blockcommit results in 'Permission denied' error
  • From: Peter Krempa
• Re: lxc - pass filesystem off host's automounts
  • From: lejeczek
• Re: lxc - pass filesystem off host's automounts
  • From: Daniel P. Berrangé
• lxc - pass filesystem off host's automounts
  • From: lejeczek
• Re: Same host migration
  • From: Peter Krempa
• Re: Cloud automation
  • From: Martin Kletzander
• Re: Same host migration
  • From: Vasiliy Tolstov
• Re: Cloud automation
  • From: Brandon Doyle
• Cloud automation
  • From: Adrien Macor
• Same host migration
  • From: Sukrit Bhatnagar
• Re: blockcommit of domain not successfull
  • From: Peter Krempa
• Re: Using qemu active blockcommit results in 'Permission denied' error
  • From: Marcus Hoffmann
• Re: blockcommit of domain not successfull
  • From: Lentes, Bernd
• Re: blockcommit of domain not successfull
  • From: Peter Krempa
• Re: Using qemu active blockcommit results in 'Permission denied' error
  • From: Peter Krempa
• Re: blockcommit of domain not successfull
  • From: Lentes, Bernd
• Re: blockcommit of domain not successfull
  • From: Peter Krempa
• blockcommit of domain not successfull
  • From: Lentes, Bernd
• Re: Easy solution for custom firewall rules-
  • From: Laine Stump
• Re: Easy solution for custom firewall rules- is it possible?
  • From: Laine Stump
• Re: Easy solution for custom firewall rules-
  • From: Joshua Kramer
• Re: Easy solution for custom firewall rules- is it possible?
  • From: nakata
• Re: Using qemu active blockcommit results in 'Permission denied' error
  • From: Marcus Hoffmann
• Re: Using qemu active blockcommit results in 'Permission denied' error
  • From: Peter Krempa
• Easy solution for custom firewall rules- is it possible?
  • From: Joshua Kramer
• Using qemu active blockcommit results in 'Permission denied' error
  • From: Marcus Hoffmann
• Re: logging of domains
  • From: Michal Privoznik
• libvirt blkiotune mechanism
  • From: Maksym Isaiev
• logging of domains
  • From: Lentes, Bernd
• Re: Snapshot of single block device
  • From: Peter Krempa
• Re: Snapshot of single block device
  • From: jarek
• Re: Snapshot of single block device
  • From: Peter Krempa
• Snapshot of single block device
  • From: jarek
• Re: [Libvirt failed to claim Virtual Functions on hostdev network after VM reboot]
  • From: Yalan Zhang
• Re: [Libvirt failed to claim Virtual Functions on hostdev network after VM reboot]
  • From: Erik Skultety
• [Libvirt failed to claim Virtual Functions on hostdev network after VM reboot]
  • From: Fuzail Ahmad
• VM bootup got failed with systemd/dbus error messages
  • From: PRIYANKA M A
• Re: libvirtd not starting
  • From: Lothar Schilling
• Re: libvirtd not starting
  • From: Lothar Schilling
• Re: [iGVT-g] GVT-g - suboptimal user experience
  • From: Gerd Hoffmann
• Re: [iGVT-g] GVT-g - suboptimal user experience
  • From: gnidorah
• Re: virtio-user intarfece
  • From: Avi Cohen
• virtio-user intarfece
  • From: Avi Cohen
• Re: [libvirt] surprising <backingStore type='file'> setting in domain.xml
  • From: Thomas Stein
• surprising <backingStore type='file'> setting in domain.xml
  • From: Thomas Stein
• Re: domain still running although snapshot-file is deleted !?!
  • From: Peter Crowther
• domain still running although snapshot-file is deleted !?!
  • From: Lentes, Bernd
• Re: domains paused without any obvious reason
  • From: Lentes, Bernd
• Re: domains paused without any obvious reason
  • From: Daniel P. Berrangé
• Re: VM display is blank when open (but Gnome Boxes thumbnails ok)
  • From: Michel Rozpendowski
• Re: domains paused without any obvious reason
  • From: Lentes, Bernd
• Re: VM display is blank when open (but Gnome Boxes thumbnails ok)
  • From: Martin Kletzander
• VM display is blank when open (but Gnome Boxes thumbnails ok)
  • From: Michel Rozpendowski
• domains paused without any obvious reason
  • From: Lentes, Bernd
• Re: Cannot get interface MTU - qemu quest fails to start off OpenVswitch
  • From: Michal Privoznik
• Re: Cannot get interface MTU - qemu quest fails to start off OpenVswitch
  • From: lejeczek
• Re: Cannot get interface MTU - qemu quest fails to start off OpenVswitch
  • From: lejeczek
• Re: Cannot get interface MTU - qemu quest fails to start off OpenVswitch
  • From: lejeczek
• Re: Cannot get interface MTU - qemu quest fails to start off OpenVswitch
  • From: lejeczek
• Re: Cannot get interface MTU - qemu quest fails to start off OpenVswitch
  • From: Michal Privoznik
• Cannot get interface MTU - qemu quest fails to start off OpenVswitch
  • From: lejeczek
• Re: Running libvirtd out of source directory connection reset error
  • From: Peter P.
• Re: Running libvirtd out of source directory connection reset error
  • From: Daniel P. Berrangé
• Running libvirtd out of source directory connection reset error
  • From: Peter P.
• Re: [iGVT-g] GVT-g - suboptimal user experience
  • From: Gerd Hoffmann
• Re: [iGVT-g] GVT-g - suboptimal user experience
  • From: Yuan, Hang
• Re: [iGVT-g] GVT-g - suboptimal user experience
  • From: Alex Ivanov
• Re: disable libvirt-nwfilter
  • From: Michal Privoznik
• Re: Autodetecting backing file properties when using vol-create-as
  • From: Gionatan Danti
• Re: disable libvirt-nwfilter
  • From: Michal Privoznik
• disable libvirt-nwfilter
  • From: nakata
• Re: VM: Unable to enable scatter-gather / tx-checksumming / tcp-segmentation offload
  • From: Harsh Gondaliya
• libvirtd not starting
  • From: Lothar Schilling
• Re: libvirtd not starting
  • From: Martin Kletzander
• Re: VM: Unable to enable scatter-gather / tx-checksumming / tcp-segmentation offload
  • From: Michal Privoznik
• VM: Unable to enable scatter-gather / tx-checksumming / tcp-segmentation offload
  • From: Harsh Gondaliya
• Re: libvirtd not starting
  • From: Martin Kletzander
• Re: Running all my virtual machines with a low priority
  • From: Martin Kletzander
• Re: libvirtd not starting
  • From: Michal Privoznik
• NUMA revisited
  • From: Patrick Meyer
• Re: Running all my virtual machines with a low priority
  • From: R. Diez
• Re: libvirtd not starting
  • From: Lothar Schilling
• Re: libvirtd not starting
  • From: Martin Kletzander
• Re: Running all my virtual machines with a low priority
  • From: Daniel P. Berrangé
• Re: Running all my virtual machines with a low priority
  • From: Martin Kletzander
• libvirtd not starting
  • From: Lothar Schilling
• Unable to have TSO GSO feature in VM
  • From: Harsh Gondaliya
• Re: Running all my virtual machines with a low priority
  • From: R. Diez
• Re: Running all my virtual machines with a low priority
  • From: Daniel P. Berrangé
• Re: Running all my virtual machines with a low priority
  • From: R. Diez
• Re: Cloning a volume via storage XML
  • From: Weller, Lennart
• Re: libvirtd via unix socket using system uri
  • From: Peter Crowther
• Re: libvirtd via unix socket using system uri
  • From: Michal Privoznik
• Re: Running all my virtual machines with a low priority
  • From: Daniel P. Berrangé
• Running all my virtual machines with a low priority
  • From: R. Diez
• Re: libvirtd via unix socket using system uri
  • From: Peter Crowther
• Re: libvirtd via unix socket using system uri
  • From: Daniel P. Berrangé
• Re: libvirtd via unix socket using system uri
  • From: Daniel P. Berrangé
• Re: libvirtd via unix socket using system uri
  • From: Peter Crowther
• Re: libvirtd via unix socket using system uri
  • From: Michal Privoznik
• Re: libvirtd via unix socket using system uri
  • From: Daniel P. Berrangé
• Re: libvirtd via unix socket using system uri
  • From: lameventanas
• Re: Error connecting to hypervisor
  • From: Michal Privoznik
• Re: libvirtd via unix socket using system uri
  • From: Michal Privoznik
• Re: Error connecting to hypervisor
  • From: Sukrit Bhatnagar
• libvirtd via unix socket using system uri
  • From: lameventanas
• Cloning a volume via storage XML
  • From: Weller, Lennart
• Re: Libvirt pool cannot see or create rbd clones
  • From: Michal Privoznik
• Re: Error connecting to hypervisor
  • From: Michal Prívozník
• Re: 5.2.0 xen and maxGrantFrames
  • From: Jim Fehlig
• Re: Libvirt pool cannot see or create rbd clones
  • From: Weller, Lennart
• Re: 5.2.0 xen and maxGrantFrames
  • From: Christoph
• Libvirt pool cannot see or create rbd clones
  • From: Weller, Lennart
• Re: 5.2.0 xen and maxGrantFrames
  • From: Pavel Hrdina
• 5.2.0 xen and maxGrantFrames
  • From: Christoph
• Re: PCI passthrough and abstraction
  • From: Laine Stump
• Re: Live Disk Backup with Active Blockcommit
  • From: Eric Blake
• Re: PCI passthrough and abstraction
  • From: Mauricio Tavares
• Live Disk Backup with Active Blockcommit
  • From: Wolf
• PCI passthrough and abstraction
  • From: Mauricio Tavares
• Re: [libvirt] JVM crashes during GC
  • From: Sachin Soman
• Autodetecting backing file properties when using vol-create-as
  • From: Gionatan Danti
• Error connecting to hypervisor
  • From: Sukrit Bhatnagar
• Re: how to use Libvirt create bridge for vm on Mac OS
  • From: Michal Privoznik
• how to use Libvirt create bridge for vm on Mac OS
  • From: llilulu
• Re: [iGVT-g] GVT-g - suboptimal user experience
  • From: Yuan, Hang
• Re: [libvirt] JVM crashes during GC
  • From: Daniel P. Berrangé
• Re: [libvirt] JVM crashes during GC
  • From: Sachin Soman
• Re: [libvirt] JVM crashes during GC
  • From: Sachin Soman
• GVT-g - suboptimal user experience
  • From: Alex Ivanov
• Re: [libvirt] JVM crashes during GC
  • From: Sachin Soman
• Re: [libvirt] JVM crashes during GC
  • From: Sachin Soman
• Re: [libvirt] JVM crashes during GC
  • From: Daniel P. Berrangé
• Re: [libvirt] JVM crashes during GC
  • From: Sachin Soman
• Re: [libvirt] JVM crashes during GC
  • From: Sachin Soman
• Re: [libvirt] JVM crashes during GC
  • From: Daniel P. Berrangé
• Re: JVM crashes during GC
  • From: Michal Prívozník
• Re: [libvirt] Why virsh domxml-to-native qemu-argv changes PCI slot number
  • From: Daniel P. Berrangé
• Re: [libvirt] Why virsh domxml-to-native qemu-argv changes PCI slot number
  • From: Andrea Bolognani
• Re: [libvirt] Why virsh domxml-to-native qemu-argv changes PCI slot number
  • From: Daniel P. Berrangé
• Re: [libvirt] Why virsh domxml-to-native qemu-argv changes PCI slot number
  • From: Andrea Bolognani
• JVM crashes during GC
  • From: Sachin Soman
• Re: Failed to probe capabilities on libvirt v5.1.0
  • From: Michal Privoznik
• Re: Network hooks for ethernet interfaces
  • From: Vasiliy Tolstov
• Re: Network hooks for ethernet interfaces
  • From: Ruben Kerkhof
• Re: Network hooks for ethernet interfaces
  • From: Vasiliy Tolstov
• Failed to probe capabilities on libvirt v5.1.0
  • From: Vladik Romanovsky
• Re: Network hooks for ethernet interfaces
  • From: Ruben Kerkhof
• Re: CGroup V2 Support
  • From: Pavel Hrdina
• Re: Network hooks for ethernet interfaces
  • From: Laine Stump
• CGroup V2 Support
  • From: ITeng A
• Re: Network hooks for ethernet interfaces
  • From: Ruben Kerkhof
• Re: Network hooks for ethernet interfaces
  • From: Michal Privoznik
• Network hooks for ethernet interfaces
  • From: Ruben Kerkhof
• Re: Guest interface names not same as configured name
  • From: PR PR
• Re: Schema
  • From: Michal Prívozník
• Re: Cannot create PID file
  • From: Michal Prívozník
• Schema
  • From: Maximilian Schieder
• Re: Guest interface names not same as configured name
  • From: Laine Stump
• Guest interface names not same as configured name
  • From: PR PR
• Re: is it possible to create a snapshot from a guest residing in a plain partition ?
  • From: Eric Blake
• Re: is it possible to create a snapshot from a guest residing in a plain partition ?
  • From: Lentes, Bernd
• Re: SEV machines and memory pinning
  • From: Daniel P. Berrangé
• SEV machines and memory pinning
  • From: Boris Bobrov
• Re: is it possible to create a snapshot from a guest residing in a plain partition ?
  • From: Eric Blake
• is it possible to create a snapshot from a guest residing in a plain partition ?
  • From: Lentes, Bernd
• Re: Clock skew on Win10
  • From: Francesc Guasch
• Re: Clock skew on Win10
  • From: Alex
• Re: Error creating virtual network: failed to run '/usr/sbin/dnsmasq --version': : Success
  • From: Michal Privoznik
• Error creating virtual network: failed to run '/usr/sbin/dnsmasq --version': : Success
  • From: Harsh Gondaliya
• Re: Error Starting domain: Failed to page size of file
  • From: Michal Privoznik
• Error Starting domain: Failed to page size of file
  • From: Harsh Gondaliya
• Re: Virt-Lightning: a cloud-like CLI for libvirt
  • From: Gonéri Le Bouder
• Re: Problem passing qemu cmdline option when using <qemu:commandline> in domain xml.
  • From: Peter Krempa
• Problem passing qemu cmdline option when using <qemu:commandline> in domain xml.
  • From: Chenzijian
• Problem passing qemu cmdline option when using <qemu:commandline> in domain xml.
  • From: Chenzijian
• Re: Virt-Lightning: a cloud-like CLI for libvirt
  • From: Michal Privoznik
• Virt-Lightning: a cloud-like CLI for libvirt
  • From: Gonéri Le Bouder
• Re: Error starting domain: internal error: Unable to add port vnet0 to OVS bridge br0
  • From: Laine Stump
• Re: virsh snapshot-create-as: change umask on snapshots
  • From: Mircea Husz
• Re: virsh snapshot-create-as: change umask on snapshots
  • From: Peter Krempa
• Re: virsh snapshot-create-as: change umask on snapshots
  • From: Eric Blake
• virsh snapshot-create-as: change umask on snapshots
  • From: Mircea Husz
• Re: Error starting domain: internal error: Unable to add port vnet0 to OVS bridge br0
  • From: Laine Stump
• use dirty bitmap to backup raw images
  • From: Zhan Adlun
• Re: KVM - full system ( disk+memory) snapshot by excluding the raw disks
  • From: Peter Krempa
• ANNOUNCE: Oz 0.17.0 release
  • From: Chris Lalancette
• KVM - full system ( disk+memory) snapshot by excluding the raw disks
  • From: Suresh Babu Kandukuru
• Error starting domain: internal error: Unable to add port vnet0 to OVS bridge br0
  • From: Harsh Gondaliya
• Re: vlan tagging for openVSwitch
  • From: Laine Stump
• Re: KVM-Docker-Networking using TAP and MACVLAN
  • From: Lars Lindstrom
• Re: KVM-Docker-Networking using TAP and MACVLAN
  • From: Lars Lindstrom
• Re: KVM-Docker-Networking using TAP and MACVLAN
  • From: Martin Kletzander
• Re: KVM-Docker-Networking using TAP and MACVLAN
  • From: Lars Lindstrom
• Re: KVM-Docker-Networking using TAP and MACVLAN
  • From: Martin Kletzander
• vlan tagging for openVSwitch
  • From: lejeczek
• KVM-Docker-Networking using TAP and MACVLAN
  • From: Lars Lindstrom
• Clock skew on Win10
  • From: Alex
• Re: How to insert a dummy NIC
  • From: wferi
• Re: How to insert a dummy NIC
  • From: Laine Stump
• Re: Obtaining the PID of a domain's QEMU process from C
  • From: Daniel P. Berrangé
• Re: Obtaining the PID of a domain's QEMU process from C
  • From: Erik Skultety
• Re: Obtaining the PID of a domain's QEMU process from C
  • From: Daniel P. Berrangé
• How to insert a dummy NIC
  • From: wferi
• Re: Obtaining the PID of a domain's QEMU process from C
  • From: Michal Privoznik
• Re: Obtaining the PID of a domain's QEMU process from C
  • From: Erik Skultety
• Re: Obtaining the PID of a domain's QEMU process from C
  • From: Shawn Anastasio
• Re: Obtaining the PID of a domain's QEMU process from C
  • From: Peter Crowther
• Re: Obtaining the PID of a domain's QEMU process from C
  • From: Shawn Anastasio
• Re: Obtaining the PID of a domain's QEMU process from C
  • From: Michal Prívozník
• Re: Obtaining the PID of a domain's QEMU process from C
  • From: Cole Robinson
• Re: Development of Libvirt PHP
  • From: Daniel P. Berrangé
• Re: Development of Libvirt PHP
  • From: Thing
• Re: Development of Libvirt PHP
  • From: Eric Blake
• Development of Libvirt PHP
  • From: Maximilian Schieder
• Re: why attach-disk can't be effective when the guest is booting
  • From: Daniel P. Berrangé
• why attach-disk can't be effective when the guest is booting
  • From: Jianan Gao
• 回复: Re: virsh hangs when backup jobs run on the kvm host
  • From: Zhan Adlun
• Re: virsh hangs when backup jobs run on the kvm host
  • From: Eric Blake
• Re: virsh hangs when backup jobs run on the kvm host
  • From: Michal Prívozník
• virsh hangs when backup jobs run on the kvm host
  • From: Zhan Adlun
• Re: How do I close a console connection?
  • From: Daniel P. Berrangé
• How do I close a console connection?
  • From: Lars Kellogg-Stedman
• Obtaining the PID of a domain's QEMU process from C
  • From: Shawn Anastasio
• Re: libvirt 5.0.0 - LXC container still in "virsh list" output after shutdown
  • From: Laine Stump
• Re: libvirt 5.0.0 - LXC container still in "virsh list" output after shutdown
  • From: mxs kolo
• Re: virsh confirmed edits do not persist
  • From: Ján Tomko
• Re: virsh confirmed edits do not persist
  • From: Josh Mcneil
• Re: virsh confirmed edits do not persist
  • From: Ján Tomko
• virsh confirmed edits do not persist
  • From: Josh Mcneil
• Re: HELP!
  • From: Daniel P. Berrangé
• Re: HELP!
  • From: Martin Kletzander
• HELP!
  • From: Shashwat shagun
• Re: virsh migrate --copy-storage-inc
  • From: Paul van der Vlis
• Re: virsh migrate --copy-storage-inc
  • From: Peter Krempa
• Re: libvirtd (4.9) version takes a long time to start
  • From: Han Han
• libvirtd (4.9) version takes a long time to start
  • From: Sharath Kurudi
• Re: concurrent migration of several domains rarely fails
  • From: Jim Fehlig
• Re: Installing libvirt and Xen on Red Hat 7.5
  • From: Alvin Starr
• Re: Installing libvirt and Xen on Red Hat 7.5
  • From: Daniel P. Berrangé
• Installing libvirt and Xen on Red Hat 7.5
  • From: Lianjie Cao
• Unable to start libvirt systemd service
  • From: Sharath Kurudi
• Re: Hook problem
  • From: Daniel P. Berrangé
• Hook problem
  • From: David Gilmour
• Re: Keyboard problems with VNC access
  • From: Daniel P. Berrangé
• Re: Keyboard problems with VNC access
  • From: Nick Howitt
• Workaround for "internal snapshots of a VM with pflash based firmware are not supported" problem?
  • From: Andreas Tscharner
• Problems with incoming multicasts
  • From: David Gra
• unable to list virtualbox domain remotely
  • From: François Marsy
• Keyboard problems with VNC access
  • From: Nick Howitt
• Re: stuck in pxe loop from uefi + tianocore/ovmf
  • From: jsl6uy js16uy
• Re: libvirt 5.0.0 - LXC container still in "virsh list" output after shutdown
  • From: mxs kolo
• Re: LXC guest to have/make a device node (FUSE)
  • From: mxs kolo
• Re: LXC guest to have/make a device node (FUSE)
  • From: Daniel P. Berrangé
• LXC guest to have/make a device node (FUSE)
  • From: lejeczek
• Re: Slow ssh
  • From: Tony Brian Albers
• Slow ssh
  • From: Pascal Legrand
• libvirt 5.0.0 - LXC container still in "virsh list" output after shutdown
  • From: mxs kolo
• *-sock created as part of normal daemon startup?
  • From: Keith Bierman
• stuck in pxe loop from uefi + tianocore/ovmf
  • From: jsl6uy js16uy
• Re: virt-install and IOThreads
  • From: Daniel P. Berrangé
• Re: virt-install and IOThreads
  • From: Igor Gnatenko
• Re: virt-install and IOThreads
  • From: Cole Robinson
• virt-install and IOThreads
  • From: Igor Gnatenko
• Re: VM running with storage image file deleted
  • From: Roosen, Nicolas
• Re: cpu0 unhandled rdmsr:
  • From: Christophe Dumont
• Re: cpu0 unhandled rdmsr:
  • From: Daniel P. Berrangé
• cpu0 unhandled rdmsr:
  • From: Christophe Dumont
• Re: VM running with storage image file deleted
  • From: Peter Krempa
• Re: forcing order of vnet creation
  • From: daggs
• forcing order of vnet creation
  • From: daggs
• Re: VM running with storage image file deleted
  • From: Roosen, Nicolas
• Re: VM running with storage image file deleted
  • From: Michal Privoznik
• Re: VM running with storage image file deleted
  • From: Michael Hierweck
• VM running with storage image file deleted
  • From: Roosen, Nicolas
• openVswitch
  • From: lejeczek
• Re: virsh on mac os X
  • From: Keith Bierman
• Re: virsh on mac os X
  • From: Keith Bierman
• Re: Golang libvirt bindings problem
  • From: Daniel P. Berrangé
• Re: virsh on mac os X
  • From: Keith Bierman
• Re: virsh on mac os X
  • From: Keith Bierman
• Re: xen and libvirt
  • From: Jim Fehlig
• Re: script called from qemu hook freezes.
  • From: daggs
• Re: script called from qemu hook freezes.
  • From: Peter Krempa
• Re: xen and libvirt
  • From: Christoph
• Re: script called from qemu hook freezes.
  • From: daggs
• Re: macvtap and tagged VLANs to the VM
  • From: Marc Haber
• Re: script called from qemu hook freezes.
  • From: Laine Stump
• Re: assigning PCI addresses with bus > 0x09
  • From: Laine Stump
• virsh on mac os X
  • From: Keith Bierman
• Re: xen and libvirt
  • From: Jim Fehlig
• Re: script called from qemu hook freezes.
  • From: daggs
• xen and libvirt
  • From: Christoph
• Re: script called from qemu hook freezes.
  • From: Peter Krempa
• guest runs into watch dog reset
  • From: b f31415
• Re: macvtap and tagged VLANs to the VM
  • From: Laine Stump
• script called from qemu hook freezes.
  • From: daggs
• Re: macvtap and tagged VLANs to the VM
  • From: Marc Haber
• Re: assigning PCI addresses with bus > 0x09
  • From: Riccardo Ravaioli
• Golang libvirt bindings problem
  • From: Branimir Pejakovic
• Re: avoiding PCI bus 8 / using PCI function / virt-install
  • From: b f31415
• Re: Network filters with clean-traffic not working on Debian Stretch
  • From: Laine Stump
• Re: macvtap and tagged VLANs to the VM
  • From: Laine Stump
• Re: avoiding PCI bus 8 / using PCI function / virt-install
  • From: Laine Stump
• Re: Network filters with clean-traffic not working on Debian Stretch
  • From: fatal
• Re: Network filters with clean-traffic not working on Debian Stretch
  • From: Yalan Zhang
• Re: macvtap and tagged VLANs to the VM
  • From: Marc Haber
• Re: avoiding PCI bus 8 / using PCI function / virt-install
  • From: b f31415
• Re: avoiding PCI bus 8 / using PCI function / virt-install
  • From: Peter Crowther
• avoiding PCI bus 8 / using PCI function / virt-install
  • From: b f31415
• Network filters with clean-traffic not working on Debian Stretch
  • From: fatal
• Re: luks ecrypted storage poll - lvm - possible?
  • From: lejeczek
• Re: concurrent migration of several domains rarely fails
  • From: Chenli Hu
• Re: luks ecrypted storage poll - lvm - possible?
  • From: Daniel P. Berrangé
• Re: Shutdown problem from virsh
  • From: Thomas Munfort
• Re: luks ecrypted storage poll - lvm - possible?
  • From: John Ferlan
• Re: Shutdown problem from virsh
  • From: Thomas Munfort
• Shutdown problem from virsh
  • From: Thomas Munfort
• CfP for VHPC ‘19: HPC Virtualization Paper Registration due January 25, 2019 - 14th Virtualization in High­-Performance Cloud Computing Workshop@ISC
  • From: VHPC 19
• Re: assigning PCI addresses with bus > 0x09
  • From: Riccardo Ravaioli
• Re: assigning PCI addresses with bus > 0x09
  • From: Riccardo Ravaioli
• luks ecrypted storage poll - lvm - possible?
  • From: lejeczek
• Re: assigning PCI addresses with bus > 0x09
  • From: Laine Stump
• Re: assigning PCI addresses with bus > 0x09
  • From: Daniel P. Berrangé
• assigning PCI addresses with bus > 0x09
  • From: Riccardo Ravaioli
• win10 network speed issue
  • From: Michael Taboada
• Re: vms doesn't coomunicate via network
  • From: daggs
• Re: vms doesn't coomunicate via network
  • From: Laine Stump
• macvtap and tagged VLANs to the VM
  • From: Marc Haber
• vms doesn't coomunicate via network
  • From: daggs
• Re: "virsh list --all" is intermittently causing a shutdown client to boot?
  • From: Peter Kukla
• Re: "virsh list --all" is intermittently causing a shutdown client to boot?
  • From: Michal Prívozník
• Re: "virsh list --all" is intermittently causing a shutdown client to boot?
  • From: Peter Kukla
• Re: "virsh list --all" is intermittently causing a shutdown client to boot?
  • From: Michal Privoznik
• Re: "virsh list --all" is intermittently causing a shutdown client to boot?
  • From: Peter Kukla
• Re: Libvirt api for esx
  • From: ROHIT SINGH
• Re: Usable and non-usable CPU models in nested virtualization
  • From: Milan Zamazal
• Re: Libvirt api for esx
  • From: Martin Kletzander
• Re: Libvirt api for esx
  • From: ROHIT SINGH
• Re: "virsh list --all" is intermittently causing a shutdown client to boot?
  • From: Jiri Denemark
• Re: Usable and non-usable CPU models in nested virtualization
  • From: Jiri Denemark
• "virsh list --all" is intermittently causing a shutdown client to boot?
  • From: Peter Kukla
• Re: Power on and power off code using LIBVIRT
  • From: Chaithra Sn
• Re: Usable and non-usable CPU models in nested virtualization
  • From: Milan Zamazal
• Re: Usable and non-usable CPU models in nested virtualization
  • From: Jiri Denemark
• Re: unable to add pci network to existing vm
  • From: daggs
• Re: unable to add pci network to existing vm
  • From: Laine Stump
• unable to add pci network to existing vm
  • From: daggs
• Re: Power on and power off code using LIBVIRT
  • From: Daniel P. Berrangé
• Re: Power on and power off code using LIBVIRT
  • From: Daniel P. Berrangé
• Re: Add trusted CA to libvirt
  • From: Daniel P. Berrangé
• Add trusted CA to libvirt
  • From: Мозолина, Надежда Викторовна
• Power on and power off code using LIBVIRT
  • From: Chaithra Sn
• Re: import qcow with snapshots
  • From: Peter Krempa
• Re: concurrent migration of several domains rarely fails
  • From: Lentes, Bernd
• Re: certificate pinning
  • From: Daniel P. Berrangé
• Re: certificate pinning
  • From: Anastasiya Ruzhanskaya
• Re: certificate pinning
  • From: Daniel P. Berrangé
• Re: certificate pinning
  • From: Anastasiya Ruzhanskaya
• Re: certificate pinning
  • From: Daniel P. Berrangé
• Re: certificate pinning
  • From: Daniel P. Berrangé
• Re: libvirt 4.1 and later - howto configure LXC with interface macvlan type='direct' ?
  • From: Laine Stump
• Re: certificate pinning
  • From: Anastasiya Ruzhanskaya
• certificate pinning
  • From: Anastasiya Ruzhanskaya
• import qcow with snapshots
  • From: Chris
• Re: concurrent migration of several domains rarely fails
  • From: Jim Fehlig
• Usable and non-usable CPU models in nested virtualization
  • From: Milan Zamazal
• Re: Libvirt api for esx
  • From: ROHIT SINGH
• Re: concurrent migration of several domains rarely fails
  • From: Lentes, Bernd
• Re: concurrent migration of several domains rarely fails
  • From: Lentes, Bernd
• Re: no drm render nodes available
  • From: Erik Skultety
• Re: no drm render nodes available
  • From: Erik Skultety
• Re: no drm render nodes available
  • From: Michael Taboada
• Re: no drm render nodes available
  • From: Erik Skultety
• connecting two vm in a network
  • From: daggs
• Re: Libvirt api for esx
  • From: Martin Kletzander
• Re: no drm render nodes available
  • From: Erik Skultety
• no drm render nodes available
  • From: Michael Taboada
• Re: Libvirt api for esx
  • From: ROHIT SINGH
• XML-RPC
  • From: Xxxx Zzz
• Re: libvirt 4.1 and later - howto configure LXC with interface macvlan type='direct' ?
  • From: Daniel P. Berrangé