U-Boot V2 Development (Barebox)

• Date Index

• [PATCH] ARM: cm-fx6: Set correct MAC address, Sascha Hauer
• [PATCH] net: make eth_register_ethaddr work on registered network devices, Sascha Hauer
• [PATCH 1/4] video: backlight-pwm: depend on GPIOLIB, Lucas Stach
  • [PATCH 2/4] net: enc28j60: fix set mac function signature, Lucas Stach
  • [PATCH 4/4] pinctrl: imx-iomux-v2: correct names in EXPORT_SYMBOL macros, Lucas Stach
  • [PATCH 3/4] ARM: imx: guf-neso: only try to enable USB if USB_ULPI is configured, Lucas Stach
  • Re: [PATCH 1/4] video: backlight-pwm: depend on GPIOLIB, Sascha Hauer
• [PATCH] ARM: [phyFLEX,phyCARD]-i.MX6: rename define in flash-headers, Stefan Christ
  • Re: [PATCH] ARM: [phyFLEX,phyCARD]-i.MX6: rename define in flash-headers, Sascha Hauer
• [PATCH] efi: enable blspec in the defconfig, Michael Olbrich
  • Re: [PATCH] efi: enable blspec in the defconfig, Sascha Hauer
• [PATCH] fixup! efi: add helper to get the GPT partition UUID for a device, Michael Olbrich
  • Re: [PATCH] fixup! efi: add helper to get the GPT partition UUID for a device, Sascha Hauer
• [PATCH] PowerPC/MPC5200, Juergen Borleis
  • [PATCH 5/5] PPC/PCM030: enable USB/OHCI pin support, Juergen Borleis
  • [PATCH 4/5] PPC/PCM030: fix reference clock, Juergen Borleis
    • Re: [PATCH 4/5] PPC/PCM030: fix reference clock, Sascha Hauer
      • Re: [PATCH 4/5] PPC/PCM030: fix reference clock, Juergen Borleis
  • [PATCH 3/5] PPC/PCM030: remove nowhere used definitions, Juergen Borleis
  • [PATCH 2/5] Devicetree/PPC: fix devicetree's fixup, Juergen Borleis
  • [PATCH 1/5] PPC/MPC52xx: add some useful GPIO definitions, Juergen Borleis
  • <Possible follow-ups>
  • [PATCH] PowerPC/MPC5200, Juergen Borleis
    • [PATCH 5/6] PPC/MPC5200: re-use the IMX I2C master driver for MPC5200, Juergen Borleis
    • [PATCH 1/6] PPC/PCM030: remove nowhere used definitions, Juergen Borleis
    • [PATCH 4/6] PPC/MPC52xx: unify header file name for clock API, Juergen Borleis
    • [PATCH 3/6] PPC/PCM030: enable USB/OHCI pin support, Juergen Borleis
    • [PATCH 2/6] PPC/PCM030: fix reference clock, Juergen Borleis
    • [PATCH 6/6] PPC/PCM030: provide EEPROM support to read factory settings, Juergen Borleis
      • fixup! PPC/PCM030: provide EEPROM support to read factory settings, Juergen Borleis
    • Re: [PATCH] PowerPC/MPC5200, Sascha Hauer
• [PATCH] xload: fix use after free, Michael Grzeschik
  • Re: [PATCH] xload: fix use after free, Sascha Hauer
• [RFC] Introduce MIPS disassembler library for barebox, Alexander Smirnov
  • Re: [RFC] Introduce MIPS disassembler library for barebox, Sascha Hauer
    • Re: [RFC] Introduce MIPS disassembler library for barebox, Smirnov Alexander
• [PATCH] console: When deactivating a console, flush it first, Sascha Hauer
• [PATCH] ata: sata-imx: Add delay to prevent link timeout, Sascha Hauer
• [PATCH] mtd: of: put master offset into partition name, Sascha Hauer
• [PATCH 1/4] usb: gadget: serial: only call into CONSOLE_FULL code if it's there, Lucas Stach
  • [PATCH 4/4] ARM: don't allow Thumb2 on AT91, Lucas Stach
  • [PATCH 3/4] ARM: rockchip: depend on OFTREE, Lucas Stach
  • [PATCH 2/4] ARM: pxa: move mainstone TEXTBASE to Kconfig, Lucas Stach
  • Re: [PATCH 1/4] usb: gadget: serial: only call into CONSOLE_FULL code if it's there, Sascha Hauer
• [PATCH v1] commands: Add dhrystone, Daniel Schultz
  • Re: [PATCH v1] commands: Add dhrystone, Sascha Hauer
    • Re: [PATCH v1] commands: Add dhrystone, Daniel Schultz
      • Re: [PATCH v1] commands: Add dhrystone, Jan Lübbe
• [PATCH] drop <stddef.h> includes, Sascha Hauer
• [PATCH] net: eth_send: Allow to use multiple network interfaces at once, Antony Pavlov
  • Re: [PATCH] net: eth_send: Allow to use multiple network interfaces at once, Sascha Hauer
• [PATCH] ARM: imx6: rename SPI NOR device to /dev/spinor0, Philipp Zabel
  • Re: [PATCH] ARM: imx6: rename SPI NOR device to /dev/spinor0, Sascha Hauer
• [RFC v2 00/16] barebox picotcp integration (2015.07.19), Antony Pavlov
  • [RFC v2 01/16] net_udp_bind(): use uint16_t type for source port, Antony Pavlov
  • [RFC v2 04/16] fs/nfs.c: use SUNRPC_PORT remote port by default, Antony Pavlov
  • [RFC v2 13/16] net: picotcp: add ifconfig command, Antony Pavlov
  • [RFC v2 03/16] fs/nfs.c: use uint16_t for port numbers, Antony Pavlov
  • [RFC v2 06/16] net: change net_udp_send() API, Antony Pavlov
  • [RFC v2 02/16] fs/tftp.c: drop unused server_port variable, Antony Pavlov
  • [RFC v2 10/16] picotcp: switch to Kbuild, Antony Pavlov
  • [RFC v2 12/16] net: picotcp: add test_picotcp command, Antony Pavlov
  • [RFC v2 07/16] net: introduce setudppeerport(), Antony Pavlov
  • [RFC v2 15/16] net: picotcp: add route command, Antony Pavlov
  • [RFC v2 14/16] net: picotcp: add ping command, Antony Pavlov
  • [RFC v2 05/16] net: change UDP handler function API, Antony Pavlov
  • [RFC v2 09/16] picotcp: add barebox target support, Antony Pavlov
  • [RFC v2 16/16] sandbox_defconfig: switch to picotcp, Antony Pavlov
  • [RFC v2 11/16] net: add initial picotcp support, Antony Pavlov
  • [RFC v2 08/16] net: import picotcp from github, Antony Pavlov
  • Re: [RFC v2 00/16] barebox picotcp integration (2015.07.19), Sascha Hauer
    • Re: [RFC v2 00/16] barebox picotcp integration (2015.07.19), Antony Pavlov
    • Re: [RFC v2 00/16] barebox picotcp integration (2015.07.19), Antony Pavlov
      • Re: [RFC v2 00/16] barebox picotcp integration (2015.07.19), Sascha Hauer
        • Re: [RFC v2 00/16] barebox picotcp integration (2015.07.19), Antony Pavlov
        • Re: [RFC v2 00/16] barebox picotcp integration (2015.07.19), Antony Pavlov
          • Re: [RFC v2 00/16] barebox picotcp integration (2015.07.19), Sascha Hauer
• [PATCH] fixup! sandbox: Update defconfig, Antony Pavlov
• [PATCH] fixup! Add new barebox logo to the tree, Antony Pavlov
  • Re: [PATCH] fixup! Add new barebox logo to the tree, Sascha Hauer
• [PATCHv2 00/16] EFI updates, Michael Olbrich
  • [PATCH 11/16] efi: use xstrdup_* when appropriate, Michael Olbrich
  • [PATCH 05/16] efi: add support for initrd loading, Michael Olbrich
  • [PATCH 16/16] efi: use an EFI variable to save the environment, Michael Olbrich
  • [PATCH 09/16] efi: write volatile EFI variables used by systemd, Michael Olbrich
  • [PATCH 08/16] efi: add helper functions to write EFI variables, Michael Olbrich
  • [PATCH 06/16] efi: add helper to get the GPT partition UUID for a device, Michael Olbrich
  • [PATCH 02/16] xfuncs: add wrapper for wchar strdup functions, Michael Olbrich
  • [PATCH 01/16] xfuncs: add xasprintf() and xvasprintf(), Michael Olbrich
  • [PATCH 07/16] efi: export device_path_from_handle(), Michael Olbrich
  • [PATCH 13/16] fs: efivars: use xstrdup_* when appropriate, Michael Olbrich
  • [PATCH 10/16] efi: use xasprintf() when appropriate, Michael Olbrich
  • [PATCH 03/16] efi: improve malloc pool allocation, Michael Olbrich
  • [PATCH 15/16] fs: efivars: read the attributes on the second get_variable(), Michael Olbrich
  • [PATCH 04/16] efi: refactor & improve application loading code, Michael Olbrich
  • [PATCH 12/16] fs: efi: use xstrdup_* when appropriate, Michael Olbrich
  • [PATCH 14/16] fs: efivars: add more error checking, Michael Olbrich
  • Re: [PATCHv2 00/16] EFI updates, Sascha Hauer
• [PATCH v3 2/2] ARM: am335x: Changed timer, Daniel Schultz
  • Re: [PATCH v3 2/2] ARM: am335x: Changed timer, Jan Lübbe
    • Re: [PATCH v3 2/2] ARM: am335x: Changed timer, Sascha Hauer
• [PATCH 1/7] mtd: core: Check partitions for empty string, Teresa Remmet
  • [PATCH 3/7] ARM: dts: am335x-phytec boards: Fixup spi flash node name, Teresa Remmet
  • [PATCH 2/7] drivers: i2c: Only register available devices, Teresa Remmet
    • Re: [PATCH 2/7] drivers: i2c: Only register available devices, Jan Lübbe
  • [PATCH 4/7] ARM: dts: phyFLEX-AM335x-som: Disable eeprom on default, Teresa Remmet
  • [PATCH 5/7] ARM: phytec-som-am335x: Add support for 1024MiB RAM on one chip, Teresa Remmet
  • [PATCH 6/7] ARM: dts: Add support for all phyCORE-AM335x options, Teresa Remmet
  • [PATCH 7/7] ARM: dts: Add support for all phyFLEX-AM335x options, Teresa Remmet
  • Re: [PATCH 1/7] mtd: core: Check partitions for empty string, Sascha Hauer
• [PATCH] fixup! fonts: Add 7x14 font, Antony Pavlov
  • Re: [PATCH] fixup! fonts: Add 7x14 font, Sascha Hauer
• [RFC] commands: Add dhrystone, Daniel Schultz
  • Re: [RFC] commands: Add dhrystone, Antony Pavlov
  • Re: [RFC] commands: Add dhrystone, Sascha Hauer
• [PATCH 1/3] ARM: imx6-mmdc: Fix cs0_end calculation, Sascha Hauer
  • [PATCH 2/3] ARM: i.MX6 cm-fx6: Fix Chip density for DDR_64BIT_2GB case, Sascha Hauer
  • [PATCH 3/3] ARM: i.MX6 cm-fx6: Fix area for get_ram_size, Sascha Hauer
• [PATCH v2 2/2] ARM: am335x: Changed timer, Daniel Schultz
  • Re: [PATCH v2 2/2] ARM: am335x: Changed timer, Jan Lübbe
    • Re: [PATCH v2 2/2] ARM: am335x: Changed timer, Daniel Schultz
• [PATCH] i.MX6 xload and Utilite support, Sascha Hauer
  • [PATCH 02/11] ARM: i.MX6: remove unnecessary includes, Sascha Hauer
  • [PATCH 04/11] memsize: Compile for PBL aswell, Sascha Hauer
  • [PATCH 08/11] spi: i.MX: move register defines to include/, Sascha Hauer
  • [PATCH 01/11] ARM: i.MX6: Add i.MX6 entry function, Sascha Hauer
  • [PATCH 07/11] images: i.MX: Create target for SRAM images, Sascha Hauer
  • [PATCH 11/11] ARM: initial cm-fx6 support, Sascha Hauer
  • [PATCH 06/11] ARM: i.MX6: create cpu_is() functions for use in PBL, Sascha Hauer
  • [PATCH 03/11] ARM: i.MX6: add function to get bootsource in pbl, Sascha Hauer
  • [PATCH 05/11] ARM: i.MX: compile boot.c for pbl aswell, Sascha Hauer
  • [PATCH 09/11] ARM: i.MX: Add SPI xload code, Sascha Hauer
  • [PATCH 10/11] ARM: i.MX6: Add DDR setup code from U-Boot, Sascha Hauer
• [PATCH 0/7] EFI updates, Michael Olbrich
  • [PATCH 1/7] efi: improve malloc pool allocation, Michael Olbrich
  • [PATCH 2/7] efi: refactor & improve application loading code, Michael Olbrich
  • [PATCH 6/7] efi: add helper functions to write EFI variables, Michael Olbrich
  • [PATCH 5/7] efi: export device_path_from_handle(), Michael Olbrich
  • [PATCH 4/7] efi: add helper to get the GPT partition UUID for a device, Michael Olbrich
    • Re: [PATCH 4/7] efi: add helper to get the GPT partition UUID for a device, Marc Kleine-Budde
      • Re: [PATCH 4/7] efi: add helper to get the GPT partition UUID for a device, Michael Olbrich
  • [PATCH 7/7] efi: write volatile EFI variables used by systemd, Michael Olbrich
    • Re: [PATCH 7/7] efi: write volatile EFI variables used by systemd, Sascha Hauer
      • Re: [PATCH 7/7] efi: write volatile EFI variables used by systemd, Michael Olbrich
        • Re: [PATCH 7/7] efi: write volatile EFI variables used by systemd, Sascha Hauer
  • [PATCH 3/7] efi: add support for initrd loading, Michael Olbrich
• [PATCH] sandbox: Update defconfig, Sascha Hauer
• [PATCH v2]: imx-image changes, Sascha Hauer
  • [PATCH 1/2] scripts: imx-image: Do not pad image, Sascha Hauer
  • [PATCH 2/2] scripts: imx-image: Make in-place capable, Sascha Hauer
• Framebuffer console patches, Sascha Hauer
  • [PATCH 01/12] graphic_utils: Add a common namespace to functions, Sascha Hauer
  • [PATCH 09/12] fb: Add fb_enable/disable functions, Sascha Hauer
  • [PATCH 05/12] graphics_utils: add function to create pixel from rgb triplet, Sascha Hauer
  • [PATCH 03/12] graphics_utils: Add function to invert an area, Sascha Hauer
  • [PATCH 11/12] graphics_utils: Let fb_open allocate the screen, Sascha Hauer
  • [PATCH 04/12] graphics_utils: Export get_pixel, Sascha Hauer
  • [PATCH 12/12] video: implement framebuffer console, Sascha Hauer
    • Re: [PATCH 12/12] video: implement framebuffer console, Sascha Hauer
  • [PATCH 10/12] fb: sdl: create graphics window on enabling, Sascha Hauer
  • [PATCH 07/12] lib/fonts: add "MINI4x6" font, Sascha Hauer
  • [PATCH 08/12] fonts: Add 7x14 font, Sascha Hauer
  • [PATCH 02/12] gui: Fix typo in function name, Sascha Hauer
  • [PATCH 06/12] import lib/fonts framework from linux kernel, Sascha Hauer
• [PATCH] sandbox_defconfig: enable 'echo -e' support as defenv uses it, Antony Pavlov
  • Re: [PATCH] sandbox_defconfig: enable 'echo -e' support as defenv uses it, Sascha Hauer
• [RFC 00/12] barebox picotcp integration (2015.07.15), Antony Pavlov
  • [RFC 01/12] picotcp: add barebox target support, Antony Pavlov
  • [RFC 02/12] picotcp: switch to Kbuild, Antony Pavlov
  • [RFC 07/12] net: picotcp: add test_picotcp command, Antony Pavlov
  • [RFC 06/12] WIP: net/dns: convert to picotcp, Antony Pavlov
  • [RFC 05/12] WIP: fs/tftp.c: convert to picotcp, Antony Pavlov
  • [RFC 04/12] WIP: fs/nfs.c: convert to picotcp, Antony Pavlov
    • Re: [RFC 04/12] WIP: fs/nfs.c: convert to picotcp, Sascha Hauer
      • Re: [RFC 04/12] WIP: fs/nfs.c: convert to picotcp, Antony Pavlov
  • [RFC 09/12] net: picotcp: add ping command, Antony Pavlov
  • [RFC 10/12] net: picotcp: add route command, Antony Pavlov
  • [RFC 11/12] sandbox_defconfig: switch to picotcp, Antony Pavlov
  • [RFC 08/12] net: picotcp: add ifconfig command, Antony Pavlov
  • [RFC 12/12] WIP: sandbox_defconfig: enable network testing-related stuff, Antony Pavlov
  • [RFC 03/12] net: add initial picotcp support, Antony Pavlov
• [PATCH 1/2] ARM: AM335x: dts: Fix wrong GPMC size mapping for omaps, Daniel Schultz
  • [PATCH 2/2] ARM: am335x: Changed timer, Daniel Schultz
    • Re: [PATCH 2/2] ARM: am335x: Changed timer, Sascha Hauer
  • Re: [PATCH 1/2] ARM: AM335x: dts: Fix wrong GPMC size mapping for omaps, Sascha Hauer
• [PATCH 2/2] Add new barebox logo to the tree, Sascha Hauer
• [PATCH] ARM: i.MX6: remove unnecessary includes, Sascha Hauer
• [PATCH] ARM: i.MX6: Add i.MX6 entry function, Sascha Hauer
• [PATCH 1/2] scripts: imx-image: Do not pad image, Sascha Hauer
  • [PATCH 2/2] scripts: imx-image: Make in-place capable, Sascha Hauer
  • Re: [PATCH 1/2] scripts: imx-image: Do not pad image, Marc Kleine-Budde
    • Re: [PATCH 1/2] scripts: imx-image: Do not pad image, Sascha Hauer
      • Re: [PATCH 1/2] scripts: imx-image: Do not pad image, Marc Kleine-Budde
• [PATCH 1/2] regulator: Factor out functions to work with regulator_internal, Sascha Hauer
  • [PATCH 2/2] regulator: Add support for regulator-boot-on device tree property, Sascha Hauer
• [PATCH 1/5] ARM: socfpga: socrates: add qspi partitions, Steffen Trumtrar
  • [PATCH 2/5] ARM: socfpga: socrates: set alias for ethernet0, Steffen Trumtrar
  • [PATCH 5/5] ARM: socfpga: defconfig: add bootstrap_devfs, Steffen Trumtrar
  • [PATCH 4/5] ARM: socfpga: socrates: register spi bbu handler, Steffen Trumtrar
  • [PATCH 3/5] ARM: socfpga: add bbu handler for spi nor, Steffen Trumtrar
    • Re: [PATCH 3/5] ARM: socfpga: add bbu handler for spi nor, Sascha Hauer
      • Re: [PATCH 3/5] ARM: socfpga: add bbu handler for spi nor, Sascha Hauer
        • Re: [PATCH 3/5] ARM: socfpga: add bbu handler for spi nor, Steffen Trumtrar
  • Re: [PATCH 1/5] ARM: socfpga: socrates: add qspi partitions, Sascha Hauer
    • Re: [PATCH 1/5] ARM: socfpga: socrates: add qspi partitions, Steffen Trumtrar
      • Re: [PATCH 1/5] ARM: socfpga: socrates: add qspi partitions, Sascha Hauer
• [PATCH] ARM: i.MX6: clarify usage of /dev/imx-ocotp, Stefan Christ
  • Re: [PATCH] ARM: i.MX6: clarify usage of /dev/imx-ocotp, Sascha Hauer
• [RFC v2] WIP: fbconsole: not so dirty font selection via param_enum, Antony Pavlov
  • Re: [RFC v2] WIP: fbconsole: not so dirty font selection via param_enum, Sascha Hauer
    • Re: [RFC v2] WIP: fbconsole: not so dirty font selection via param_enum, Antony Pavlov
      • Re: [RFC v2] WIP: fbconsole: not so dirty font selection via param_enum, Sascha Hauer
• [RFC] WIP: fbconsole: very dirty font selection via param_enum, Antony Pavlov
  • Re: [RFC] WIP: fbconsole: very dirty font selection via param_enum, Sascha Hauer
    • Re: [RFC] WIP: fbconsole: very dirty font selection via param_enum, Antony Pavlov
  • Re: [RFC] WIP: fbconsole: very dirty font selection via param_enum, Sascha Hauer
    • Re: [RFC] WIP: fbconsole: very dirty font selection via param_enum, Antony Pavlov
• [PATCH] fixup! ddr_spd: add routine for printing DDR2 SPD contents in human-readable format, Alexander Smirnov
  • Re: [PATCH] fixup! ddr_spd: add routine for printing DDR2 SPD contents in human-readable format, Sascha Hauer
• [PATCH] ARM: omap: xload: Fix func uninitialized warning, Sascha Hauer
• [PATCH] graphics_utils: Let fb_open allocate the screen, Sascha Hauer
• [PATCH] lib: libfile: Do not ignore errors in close(), Andrey Smirnov
  • Re: [PATCH] lib: libfile: Do not ignore errors in close(), Sascha Hauer
    • Re: [PATCH] lib: libfile: Do not ignore errors in close(), Andrey Smirnov
• [PATCH] fixup! exitcall: Add exitcall infrastructure, Antony Pavlov
  • [PATCH] fixup! exitcall: move arch_shutdown to exitcall infrastructure, Antony Pavlov
  • Re: [PATCH] fixup! exitcall: Add exitcall infrastructure, Sascha Hauer
  • Re: Re: [PATCH] fixup! exitcall: Add exitcall infrastructure, codina . herve
• [PATCH] fixup! WIP: video: implement quick-n-dirty framebuffer console, Antony Pavlov
  • Re: [PATCH] fixup! WIP: video: implement quick-n-dirty framebuffer console, Sascha Hauer
• [RFC-WIP 0/5] fbconsole: switch to lib/fonts framework, Antony Pavlov
  • [RFC-WIP 1/5] for-ammend: fbconsole: FBCONSOLE -> FRAMEBUFFER_CONSOLE, Antony Pavlov
  • [RFC-WIP 5/5] video: fbconsole: switch to "MINI4x6" font: just for demo purposes, Antony Pavlov
  • [RFC-WIP 2/5] import lib/fonts framework from linux kernel, Antony Pavlov
  • [RFC-WIP 4/5] lib/fonts: add "MINI4x6" font, Antony Pavlov
  • [RFC-WIP 3/5] for-ammend: video: fbconsole: switch to lib/fonts framework, Antony Pavlov
  • Re: [RFC-WIP 0/5] fbconsole: switch to lib/fonts framework, Sascha Hauer
• [PATCH 1/2] graphic_utils: Add a common namespace to functions, Sascha Hauer
  • [PATCH 2/2] gui: Fix typo in function name, Sascha Hauer
• Video support for EfikaSB, Sascha Hauer
  • [PATCH 10/13] video: ipuv3: remove unused variable, Sascha Hauer
  • [PATCH 09/13] video: Add missing prototype for display_timings_release, Sascha Hauer
  • [PATCH 13/13] video: Add simple-panel support, Sascha Hauer
  • [PATCH 12/13] video: ipuv3: match ipu_di_signal_cfg's clk_pol with its description, Sascha Hauer
  • [PATCH 04/13] ARM: i.MX51 Efikasb: Disable backlight earlier, Sascha Hauer
  • [PATCH 05/13] ARM: i.MX51 Efikasb: make more space for barebox, Sascha Hauer
  • [PATCH 03/13] of_graph: add of_graph_port_is_available, Sascha Hauer
  • [PATCH 11/13] video: ipuv3: Replace ipu_output with VPL, Sascha Hauer
  • [PATCH 07/13] video: Add Video Pipeline (VPL) support, Sascha Hauer
  • [PATCH 02/13] of: import of_graph functions, Sascha Hauer
  • [PATCH 08/13] video: Add MTL017 LVDS encoder support, Sascha Hauer
  • [PATCH 06/13] ARM: i.MX51 Efikasb: update device tree, Sascha Hauer
  • [PATCH 01/13] of: base: implement of_get_next_child, Sascha Hauer
• [PATCH] ARM/Vincell LT: Fix nand probe, move vincell_devices_init to coredevice_initcall, Enrico Jorns
  • Re: [PATCH] ARM/Vincell LT: Fix nand probe, move vincell_devices_init to coredevice_initcall, Sascha Hauer
• [PATCH] fixup! i2c-omap: add bus recovery support, Jan Luebbe
• [PATCH] of/base: fix typo, Jan Luebbe
  • Re: [PATCH] of/base: fix typo, Sascha Hauer
• [PATCH 1/2] i2c: only register enabled child nodes, Jan Luebbe
  • [PATCH 2/2] spi: only register enabled child nodes, Jan Luebbe
  • Re: [PATCH 1/2] i2c: only register enabled child nodes, Sascha Hauer
• i2c bus recovery support, Jan Luebbe
  • [PATCH 1/4] i2c: add bus recovery infrastructure, Jan Luebbe
    • Re: [PATCH 1/4] i2c: add bus recovery infrastructure, Sascha Hauer
  • [PATCH 3/4] i2c-omap: clear ARDY twice, Jan Luebbe
  • [PATCH 4/4] i2c-omap: add bus recovery support, Jan Luebbe
  • [PATCH 2/4] i2c: only use set_scl for recovery after calling prepare_recovery, Jan Luebbe
• Re: Boot using SPI-NOR device, Sascha Hauer
  • Message not available
    • Message not available
      • Re: Boot using SPI-NOR device, Sascha Hauer
• [PATCH 1/2] ARM: i.MX: Add i.MX5 debug functions, Sascha Hauer
  • [PATCH 2/2] ARM: vincell: move to DT probing, Sascha Hauer
  • Re: [PATCH 1/2] ARM: i.MX: Add i.MX5 debug functions, Enrico Joerns
    • Re: [PATCH 1/2] ARM: i.MX: Add i.MX5 debug functions, Sascha Hauer
• [PATCH] Build with -fno-delete-null-pointer-checks, Sascha Hauer
  • Re: [PATCH] Build with -fno-delete-null-pointer-checks, Marc Kleine-Budde
    • Re: [PATCH] Build with -fno-delete-null-pointer-checks, Sascha Hauer
  • Re: [PATCH] Build with -fno-delete-null-pointer-checks, Uwe Kleine-König
• [RFC] WIP: video: implement quick-n-dirty framebuffer console, Antony Pavlov
  • Re: [RFC] WIP: video: implement quick-n-dirty framebuffer console, Sascha Hauer
    • Re: [RFC] WIP: video: implement quick-n-dirty framebuffer console, Antony Pavlov
      • Re: [RFC] WIP: video: implement quick-n-dirty framebuffer console, Sascha Hauer
  • Re: [RFC] WIP: video: implement quick-n-dirty framebuffer console, Sascha Hauer
    • Re: [RFC] WIP: video: implement quick-n-dirty framebuffer console, Antony Pavlov
• [PATCH] socfpga_mkimage: Fix/clarify error message, Sascha Hauer
• [PATCH] ARM: imx6: do not include arm/imx6q.dtsi from barebox imx6q.dtsi, Philipp Zabel
  • Re: [PATCH] ARM: imx6: do not include arm/imx6q.dtsi from barebox imx6q.dtsi, Sascha Hauer
• [PATCH] ARM: imx6: fix GK802 DT, Philipp Zabel
  • Re: [PATCH] ARM: imx6: fix GK802 DT, Uwe Kleine-König
• [PATCH] ARM: Add TEM i.MX28 board support, Sascha Hauer
• [PATCH 1/9] video: stm: remove unnecessary info function, Sascha Hauer
  • [PATCH 9/9] video: stm: reserve framebuffer memory for Linux, Sascha Hauer
  • [PATCH 7/9] video: stm: honor display_flags, Sascha Hauer
  • [PATCH 5/9] video: stm: read interface width from device tree, Sascha Hauer
  • [PATCH 3/9] video: stm: code buswidth in platform data as decimal, Sascha Hauer
  • [PATCH 8/9] video: Add generic fixup handler to reserve fb memory, Sascha Hauer
  • [PATCH 2/9] video: stm: copy platform_data to driver data, Sascha Hauer
  • [PATCH 6/9] video: stm: read bits-per-pixel from device tree, Sascha Hauer
  • [PATCH 4/9] video: stm: use uncached memory, Sascha Hauer
• [PATCH 0/4] exitcall infrastructure, Herve Codina
  • [PATCH 3/4] exitcall: move arch_shutdown to exitcall infrastructure, Herve Codina
  • [PATCH 1/4] exitcall: Add exitcall infrastructure, Herve Codina
  • [PATCH 2/4] exitcall: move device_shutdown to exitcall infrastructure, Herve Codina
  • [PATCH 4/4] exitcall: move board_shutdown to exitcall infrastructure, Herve Codina
  • Re: [PATCH 0/4] exitcall infrastructure, Sascha Hauer
    • Re: [PATCH 0/4] exitcall infrastructure, Herve Codina
• [PATCH] build: update compiler*.h to newest versions, Alexey Galakhov
  • Re: [PATCH] build: update compiler*.h to newest versions, Sascha Hauer
• [PATCH] ARM: am33xx: netboot use ramfs, Jan Remmet
  • Re: [PATCH] ARM: am33xx: netboot use ramfs, Sascha Hauer
• [PATCH 0/3] add spd_decode command (SPD EEPROM data decoder), Alexander Smirnov
  • [PATCH 1/3] common: move DDR_SPD to common/Kconfig, Alexander Smirnov
  • [PATCH 3/3] commands: add spd_decode command, Alexander Smirnov
  • [PATCH 2/3] ddr_spd: add routine for printing DDR2 SPD contents in human-readable format, Alexander Smirnov
    • Re: [PATCH 2/3] ddr_spd: add routine for printing DDR2 SPD contents in human-readable format, Sascha Hauer
  • Re: [PATCH 0/3] add spd_decode command (SPD EEPROM data decoder), Sascha Hauer
• [PATCH] state: fix range check on uint8 and uint32 variables, Marc Kleine-Budde
  • Re: [PATCH] state: fix range check on uint8 and uint32 variables, Marc Kleine-Budde
  • Re: [PATCH] state: fix range check on uint8 and uint32 variables, Marc Kleine-Budde
• [PATCH] state: use name of device node as name, if alias is not available, Marc Kleine-Budde
  • Re: [PATCH] state: use name of device node as name, if alias is not available, Sascha Hauer
• [PATCH v2] mtd: mark devname argument of add_mtd_device as const, Marc Kleine-Budde
  • Re: [PATCH v2] mtd: mark devname argument of add_mtd_device as const, Marc Kleine-Budde
    • Re: [PATCH v2] mtd: mark devname argument of add_mtd_device as const, Sascha Hauer
      • Re: [PATCH v2] mtd: mark devname argument of add_mtd_device as const, Marc Kleine-Budde
• [PATCH] digest: digest doesn't return an error if the signature length is incorrect, Philippe Leduc
  • Re: [PATCH] digest: digest doesn't return an error if the signature length is incorrect, Marc Kleine-Budde
  • Re: [PATCH] digest: digest doesn't return an error if the signature length is incorrect, Sascha Hauer
    • Re: [PATCH] digest: digest doesn't return an error if the signature length is incorrect, Philippe Leduc
• [PATCH] usb: musb: Use proper timeout loop, Sascha Hauer
• v2015.07.0, Sascha Hauer
• Re: how to do a digest on a flashed uImage ? uimage command evolution, Philippe Leduc
  • Re: how to do a digest on a flashed uImage ? uimage command evolution, Jean-Christophe PLAGNIOL-VILLARD
    • Re: how to do a digest on a flashed uImage ? uimage command evolution, Philippe Leduc
      • Re: how to do a digest on a flashed uImage ? uimage command evolution, Jean-Christophe PLAGNIOL-VILLARD
        • Re: how to do a digest on a flashed uImage ? uimage command evolution, Philippe Leduc
• [RFC V4 0/3] add decode command (SPD EEPROM data decoder), Alexander Smirnov
  • [RFC V4 3/3] add decode command (SPD EEPROM data decoder), Alexander Smirnov
    • Re: [RFC V4 3/3] add decode command (SPD EEPROM data decoder), Sascha Hauer
  • [RFC V4 1/3] common: move DDR_SPD to common/Kconfig, Alexander Smirnov
  • [RFC V4 2/3] ddr_spd: add routune for printing SPD contents in human readable format, Alexander Smirnov
    • Re: [RFC V4 2/3] ddr_spd: add routune for printing SPD contents in human readable format, Antony Pavlov
    • Re: [RFC V4 2/3] ddr_spd: add routune for printing SPD contents in human readable format, Sascha Hauer
• [PATCH 1/3] ARM: add a machine number mechanism for boarddata, Sascha Hauer
  • [PATCH 3/3] ARM: beagleboard: register update handlers for NAND, Sascha Hauer
  • [PATCH 2/3] ARM: beagleboard: Move to multiimage support, Sascha Hauer
• [PATCH 1/3] ppc: replace extern inline with static inline, Sascha Hauer
  • [PATCH 3/3] treewide: replace __inline__ with inline, Sascha Hauer
  • [PATCH 2/3] blackfin: replace extern inline with static inline, Sascha Hauer
• [PATCH] net: Move library functions to net/lib.c, Sascha Hauer
  • Re: [PATCH] net: Move library functions to net/lib.c, Antony Pavlov
    • Re: [PATCH] net: Move library functions to net/lib.c, Sascha Hauer
• [PATCH 1/3] bus: omap-gpmc: fix wrong bit setting, Sascha Hauer
  • [PATCH 2/3] of: export of_platform_device_create, Sascha Hauer
  • [PATCH 3/3] bus: omap-gpmc: Add Generic device support, Sascha Hauer
• [PATCH] ARM: start: Fix code reordering problem, Sascha Hauer
• [PATCH] ARM: OMAP: Add omap3 USB loader tool, Sascha Hauer
• should we change 'extern inline' to 'static inline'?, Antony Pavlov
  • Re: should we change 'extern inline' to 'static inline'?, Sascha Hauer
• [PATCH] ARM: OMAP3: Change DSS divider to the one U-Boot uses, Sascha Hauer
• [PATCH 1/2] bbu: Add a standard file-to-device-copy handler, Sascha Hauer
  • [PATCH 2/2] ARM: AM335x: replace specific barebox update handler with generic one, Sascha Hauer
• how to do a digest on a flashed uImage ?, Philippe Leduc
  • Re: how to do a digest on a flashed uImage ?, Sascha Hauer
    • Re: how to do a digest on a flashed uImage ?, Jean-Christophe PLAGNIOL-VILLARD
• big-endian sandbox issue, Antony Pavlov
  • Re: big-endian sandbox issue, Sascha Hauer
• [PATCH] sandbox: asm/byteorder.h: fix guard macro name, Antony Pavlov
  • Re: [PATCH] sandbox: asm/byteorder.h: fix guard macro name, Sascha Hauer
• [PATCH] dns: handle incoming packets in the separate dns_recv() function, Antony Pavlov
  • Re: [PATCH] dns: handle incoming packets in the separate dns_recv() function, Sascha Hauer
• [PATCH] treewide: fix 'new blank line at EOF' formatting error, Antony Pavlov
  • Re: [PATCH] treewide: fix 'new blank line at EOF' formatting error, Sascha Hauer
• [RFC V3 0/3] add decode command (SPD EEPROM data decoder), Alexander Smirnov
  • [RFC V3 2/3] ddr_spd: add routune for printing SPD contents in human readable format, Alexander Smirnov
    • Re: [RFC V3 2/3] ddr_spd: add routune for printing SPD contents in human readable format, Antony Pavlov
    • Re: [RFC V3 2/3] ddr_spd: add routune for printing SPD contents in human readable format, Antony Pavlov
  • [RFC V3 3/3] add decode command (SPD EEPROM data decoder), Alexander Smirnov
  • [RFC V3 1/3] common: move DDR_SPD to common/Kconfig, Alexander Smirnov
• [PATCH] mx53-qsb: Fix boot hang during reboot stress test, Fabio Estevam
  • Re: [PATCH] mx53-qsb: Fix boot hang during reboot stress test, Sascha Hauer
• [PATCH] read_file_2(): drop unnecessary 'else', Alexander Smirnov
  • Re: [PATCH] read_file_2(): drop unnecessary 'else', Sascha Hauer
• Fw: next: sandbox: arch/sandbox/os/common.c:31:18: fatal error: init.h: No such file or directory, Antony Pavlov
  • Re: Fw: next: sandbox: arch/sandbox/os/common.c:31:18: fatal error: init.h: No such file or directory, Sascha Hauer
• [PATCH 1/2] mtd: Make devname argument to add_mtd_device const, Sascha Hauer
  • [PATCH 2/2] mtd: m25p80: make flash_name const, Sascha Hauer
• [PATCH] mtd: m25p80: Fix Kconfig dependencies, Sascha Hauer
• [PATCH 0/3] tftp: prepare for picotcp, Antony Pavlov
  • [PATCH 3/3] tftp_recv(): handle opcode field in a more natural way, Antony Pavlov
  • [PATCH 2/3] tftp_recv(): according to RFC1350 minimal tftp packet length is 4 bytes, Antony Pavlov
  • [PATCH 1/3] fs/tftp: handle incoming packets in the separate tftp_recv() function, Antony Pavlov
  • Re: [PATCH 0/3] tftp: prepare for picotcp, Sascha Hauer
• [PATCH 1/4] mtd: m25p80: explicitly cast name pointer, Lucas Stach
  • [PATCH 3/4] parameter: always build MAC dev param functions, Lucas Stach
  • [PATCH 4/4] mtd: spi-nor: depend on SPI, Lucas Stach
    • Re: [PATCH 4/4] mtd: spi-nor: depend on SPI, Sascha Hauer
  • [PATCH 2/4] commands: digest: fix harmless warning, Lucas Stach
    • Re: [PATCH 2/4] commands: digest: fix harmless warning, Sascha Hauer
  • Re: [PATCH 1/4] mtd: m25p80: explicitly cast name pointer, Sascha Hauer
• [PATCH 1/3] boards: phytec-som-am335x: Get ready for EMMC boot, Teresa Remmet
  • [PATCH 2/3] ARM: dts: am33xx-strip: Keep devices we can boot from, Teresa Remmet
  • [PATCH 3/3] ARM: dts: am33xx-strip: Strip more unused nodes, Teresa Remmet
  • Re: [PATCH 1/3] boards: phytec-som-am335x: Get ready for EMMC boot, Sascha Hauer
• ubi: Make attaching UBI more convenient, Sascha Hauer
  • [PATCH 1/8] commands: detect: use device_detect_by_name, Sascha Hauer
  • [PATCH 2/8] driver: detect: detect parent devices aswell, Sascha Hauer
  • [PATCH 3/8] blspec: Use device_detect_by_name, Sascha Hauer
  • [PATCH 6/8] ubi: Lower 'already attached' message to debug level, Sascha Hauer
  • [PATCH 5/8] mtd: detect ubi devices automatically, Sascha Hauer
  • [PATCH 4/8] ubi: Use preditable device names, Sascha Hauer
  • [PATCH 8/8] ubi: Update documentation, Sascha Hauer
  • [PATCH 7/8] commands: mount: detect the device to be mounted, Sascha Hauer
• [PATCH repost 1/4] usb: gadget: pxa27x: depend on right symbol, Lucas Stach
  • [PATCH repost 2/4] MCI: pxa: depend on right symbol, Lucas Stach
  • [PATCH repost 4/4] ARM: pxa: move lubbock TEXTBASE to Kconfig, Lucas Stach
  • [PATCH repost 3/4] ARM: socfpga: add default ARCH_TEXT_BASE, Lucas Stach
  • Re: [PATCH repost 1/4] usb: gadget: pxa27x: depend on right symbol, Sascha Hauer
• [PATCH 1/3] state: fixup: only export default value during fixup if set, Marc Kleine-Budde
  • [PATCH 2/3] fixup! state: add support for fixed length strings, Marc Kleine-Budde
  • [PATCH 3/3] fixup! state: add support for fixed length strings, Marc Kleine-Budde
  • Re: [PATCH 1/3] state: fixup: only export default value during fixup if set, Sascha Hauer
• [PATCH v2 1/2] images: Add file size check for PBLX files, Wadim Egorov
  • [PATCH v2 2/2] ARM: OMAP: Add max file size for PBLX images, Wadim Egorov
  • Re: [PATCH v2 1/2] images: Add file size check for PBLX files, Sascha Hauer
• [PATCHv3] Change barebox regarding "machine-restart", "reset cause detection" und "watchdog usage", Juergen Borleis
  • [PATCH 4/5] Watchdog/i.MX: make the watchdog driver a regular driver, Juergen Borleis
  • [PATCH 3/5] Watchdog: add a scope value to the watchdog feature, Juergen Borleis
  • [PATCH 5/5] MFD/DA9053: da9053: add basic da9053 driver, Juergen Borleis
  • [PATCH 1/5] Reset reason: add a scope value to the reset reason feature, Juergen Borleis
  • [PATCH 2/5] System restart: add a scope value to the system restart feature, Juergen Borleis
• [PATCH] image_renderer: Use read_file_2, Sascha Hauer
• [PATCH] ARM: tegra: jump to maincluster earlier, Lucas Stach
  • Re: [PATCH] ARM: tegra: jump to maincluster earlier, Sascha Hauer
• [RFC V2 0/3] add decode command (SPD EEPROM data decoder), Alexander Smirnov
  • [RFC V2 1/3] common: move DDR_SPD to common/Kconfig, Alexander Smirnov
    • Re: [RFC V2 1/3] common: move DDR_SPD to common/Kconfig, Renaud Barbier
  • [RFC V2 3/3] add decode command (SPD EEPROM data decoder), Alexander Smirnov
    • Re: [RFC V2 3/3] add decode command (SPD EEPROM data decoder), Antony Pavlov
    • Re: [RFC V2 3/3] add decode command (SPD EEPROM data decoder), Sascha Hauer
  • [RFC V2 2/3] ddr_spd: add routune for printing SPD contents in human readable format, Alexander Smirnov
    • Re: [RFC V2 2/3] ddr_spd: add routune for printing SPD contents in human readable format, Sascha Hauer
• [PATCH 1/2] PCI: rework BAR size calculation, Lucas Stach
  • [PATCH 2/2] PCI: remove bogus host bridge setup skipping, Lucas Stach
  • Re: [PATCH 1/2] PCI: rework BAR size calculation, Antony Pavlov
  • Re: [PATCH 1/2] PCI: rework BAR size calculation, Sascha Hauer
• [PATCH] bmp support: Use unaligned accessors, Sascha Hauer
• [PATCHv2] Change barebox regarding "machine-restart", "reset cause detection" und "watchdog usage", Juergen Borleis
  • [PATCH 3/5] Watchdog: add a scope value to the watchdog feature, Juergen Borleis
    • Re: [PATCH 3/5] Watchdog: add a scope value to the watchdog feature, Sascha Hauer
  • [PATCH 4/5] Watchdog/i.MX: make the watchdog driver a regular driver, Juergen Borleis
  • [PATCH 5/5] MFD/DA9053: da9053: add basic da9053 driver, Juergen Borleis
  • [PATCH 1/5] Reset reason: add a scope value to the reset reason feature, Juergen Borleis
    • Re: [PATCH 1/5] Reset reason: add a scope value to the reset reason feature, Sascha Hauer
      • Re: [PATCH 1/5] Reset reason: add a scope value to the reset reason feature, Juergen Borleis
  • [PATCH 2/5] System restart: add a scope value to the system restart feature, Juergen Borleis
    • Re: [PATCH 2/5] System restart: add a scope value to the system restart feature, Sascha Hauer
• [PATCH] param_enum: protect against invalid values, Sascha Hauer
• [PATCH] param_enum: Make name strings const, Sascha Hauer
• [PATCH] devinfo: fix return value, Sascha Hauer
• Fw: [Qemu-devel] [PATCH v7 0/4] i.MX: Add i.MX25 support through the 3DS evaluation board., Antony Pavlov
  • Re: Fw: [Qemu-devel] [PATCH v7 0/4] i.MX: Add i.MX25 support through the 3DS evaluation board., Sascha Hauer
• Compiling barebox for newest Yocto/meta-freescale, György Kövesdi
  • Re: Compiling barebox for newest Yocto/meta-freescale, Jan Lübbe
    • Re: Compiling barebox for newest Yocto/meta-freescale, György Kövesdi
      • Re: Compiling barebox for newest Yocto/meta-freescale, Holger Schurig
        • Re: Compiling barebox for newest Yocto/meta-freescale, György Kövesdi
          • Re: Compiling barebox for newest Yocto/meta-freescale, Holger Schurig
            • Re: Compiling barebox for newest Yocto/meta-freescale, György Kövesdi
              • Re: Compiling barebox for newest Yocto/meta-freescale, Holger Schurig
                • Re: Compiling barebox for newest Yocto/meta-freescale, Gyorgy Kovesdi
                  • Re: Compiling barebox for newest Yocto/meta-freescale, Lucas Stach
                    • Re: Compiling barebox for newest Yocto/meta-freescale, Jan Lübbe
                      • Re: Compiling barebox for newest Yocto/meta-freescale, Fabio Estevam
                      • Re: Compiling barebox for newest Yocto/meta-freescale, Gyorgy Kovesdi
• [PATCH] ARM: OMAP: remove unused CONFIG_OMAP3_CLOCK_CONFIG option, Sascha Hauer
• [PATCH] net: smc911x: Add device tree support, Sascha Hauer
• [PATCH] Change barebox regarding "machine-restart", "reset cause detection" und "watchdog usage", Juergen Borleis
  • [PATCH 6/6] MFD/DA9053: da9053: add basic da9053 driver, Juergen Borleis
  • [PATCH 1/6] Common: define scopes a specific hardware or software feature can cope with, Juergen Borleis
  • [PATCH 4/6] Watchdog: add a scope value to the watchdog feature, Juergen Borleis
  • [PATCH 5/6] Watchdog/i.MX: make the watchdog driver a regular driver, Juergen Borleis
  • [PATCH 2/6] Reset reason: add a scope value to the reset reason feature, Juergen Borleis
  • [PATCH 3/6] System restart: add a scope value to the system restart feature, Juergen Borleis
    • Re: [PATCH 3/6] System restart: add a scope value to the system restart feature, Sascha Hauer
      • Re: [PATCH 3/6] System restart: add a scope value to the system restart feature, Juergen Borleis
• [PATCH 1/2] mtd: Add mtd concat support, Sascha Hauer
  • [PATCH 2/2] mtd: cfi-flash: Add mtd concat support, Sascha Hauer
• [PATCH] serial: ns16550: Fix reading clock-frequency property, Sascha Hauer
  • Re: [PATCH] serial: ns16550: Fix reading clock-frequency property, Antony Pavlov
    • Re: [PATCH] serial: ns16550: Fix reading clock-frequency property, Sascha Hauer
• cfi-flash cleanups, Sascha Hauer
  • [PATCH 06/11] mtd: cfi-flash: make flash_detect_width more readable, Sascha Hauer
  • [PATCH 04/11] mtd: cfi-flash: replace ifdef with IS_ENABLED, Sascha Hauer
  • [PATCH 09/11] mtd: cfi-flash: use unaligned accessor functions, Sascha Hauer
  • [PATCH 11/11] mtd: cfi-flash: remove dead code, Sascha Hauer
  • [PATCH 03/11] mtd: cfi-flash: statically initialize instead of memset, Sascha Hauer
  • [PATCH 02/11] mtd: cfi-flash: save indention level, Sascha Hauer
  • [PATCH 08/11] mtd: cfi-flash: turn some messages into vdbg, Sascha Hauer
  • [PATCH 01/11] mtd: cfi-flash: We can print longlongs, Sascha Hauer
  • [PATCH 07/11] mtd: cfi-flash: return 0 for success, Sascha Hauer
  • [PATCH 05/11] mtd: cfi-flash: remove unnecessary ifdefs, Sascha Hauer
  • [PATCH 10/11] mtd: cfi-flash: Coding style cleanup, Sascha Hauer
• [RFC] add decode command (SPD EEPROM data decoder), Alexander Smirnov
  • Re: [RFC] add decode command (SPD EEPROM data decoder), Sascha Hauer
    • Re: [RFC] add decode command (SPD EEPROM data decoder), Smirnov Alexander
• [Patch] Trivial changes, Juergen Borleis
  • [PATCH 1/3] Documentation: fix spelling, Juergen Borleis
  • [PATCH 2/3] Documentation: be more precise about the topic, Juergen Borleis
  • [PATCH 3/3] arch/BCM47xx: remove bogus copy'n'paste comment, Juergen Borleis
  • Re: [Patch] Trivial changes, Sascha Hauer
• USB Host i.Mx6S, andreas . willig
  • Antwort: USB Host i.Mx6S, andreas . willig
• Re: [PATCH] libdt: fix detection of eeprom devicepath, Marc Kleine-Budde
  • Re: [PATCH] libdt: fix detection of eeprom devicepath, Marc Kleine-Budde
    • Re: [PATCH] libdt: fix detection of eeprom devicepath, Jan Remmet
      • Re: [PATCH] libdt: fix detection of eeprom devicepath, Marc Kleine-Budde
• Bootspec: Allow to automatically append root= option, Sascha Hauer
  • [PATCH 2/6] cdev: Add partuuid string to struct cdev, Sascha Hauer
  • [PATCH 1/6] Add globalvar_add_simple_string function, Sascha Hauer
  • [PATCH 4/6] fs: ubifs: Implement Linux rootarg, Sascha Hauer
  • [PATCH 6/6] blspec: Automatically append rootarg, Sascha Hauer
    • Re: [PATCH 6/6] blspec: Automatically append rootarg, Marc Kleine-Budde
      • Re: [PATCH 6/6] blspec: Automatically append rootarg, Sascha Hauer
        • Re: [PATCH 6/6] blspec: Automatically append rootarg, Marc Kleine-Budde
  • [PATCH 3/6] fs: Add device parameter for Linux root= option, Sascha Hauer
  • [PATCH 5/6] fs: nfs: Implement Linux rootarg, Sascha Hauer
• [PATCH] device parameters: sort alphabetically, Sascha Hauer
• [PATCH] scripts: Add mxs-usb-loader to .gitignore, Sascha Hauer
• [PATCH v3 0/4] state: add support for fixed size strings, Marc Kleine-Budde
  • [PATCH v3 1/4] parameter: allow setting of string parameters of zero length, Marc Kleine-Budde
  • [PATCH v3 2/4] xfuncs: import xstrndup() from busybox, Marc Kleine-Budde
  • [PATCH v3 4/4] state: add support for fixed length strings, Marc Kleine-Budde
  • [PATCH v3 3/4] state: struct variable_type::import: remove const from node argument, Marc Kleine-Budde
  • Re: [PATCH v3 0/4] state: add support for fixed size strings, Sascha Hauer
• [PATCH] login: fix broken login command, Hubert Feurstein
  • Re: [PATCH] login: fix broken login command, Sascha Hauer
• [PATCH 1/2] blspec: Add missing prototype for blspec_scan_device, Sascha Hauer
  • [PATCH 2/2] blspec: Automatically attach UBI devices, Sascha Hauer
• state: access from linux, Jan Remmet
  • Re: state: access from linux, Sascha Hauer
    • Re: state: access from linux, Marc Kleine-Budde
      • Re: state: access from linux, Jan Remmet
    • barebox-state (dt-utils): dump-shell broken for state@0, Andreas Pretzsch
      • Re: barebox-state (dt-utils): dump-shell broken for state@0, Sascha Hauer
        • Re: barebox-state (dt-utils): dump-shell broken for state@0, Marc Kleine-Budde
• [PATCH 1/1] mach-clps711: call shutdown_barebox instead of arch_shutdown in reset_cpu, Herve Codina
  • Re: [PATCH 1/1] mach-clps711: call shutdown_barebox instead of arch_shutdown in reset_cpu, Sascha Hauer
• [PATCH] Add some doc, Juergen Borleis
  • [PATCH 1/2] Documentation: add some info about the reset reason framework, Juergen Borleis
  • [PATCH 2/2] Documentation: add some info about the reset variants, Juergen Borleis
  • Re: [PATCH] Add some doc, Sascha Hauer
• [PATCH 1/6] Documentation: add some info about the reset variants, Juergen Borleis
  • [PATCH 5/6] MFD/DA9053: remove not required header file, Juergen Borleis
  • [PATCH 2/6] Watchdog/i.MX: make the watchdog driver a regular driver, Juergen Borleis
  • [PATCH 4/6] MFD/DA9053: provide system reset, Juergen Borleis
  • [PATCH 3/6] MFD/DA9053: adapt driver to the current reset source framework, Juergen Borleis
  • [PATCH 6/6] mfd: da9063: add da9063 watchdog and system restart driver, Juergen Borleis
  • Re: [PATCH 1/6] Documentation: add some info about the reset variants, Jürgen Borleis
• parallel lcd on i.mx6, Yi Qingliang
  • Re: parallel lcd on i.mx6, Sascha Hauer
• [PATCH] mtd: m25p80: add Spansion S25FL204K support, Antony Pavlov
  • Re: [PATCH] mtd: m25p80: add Spansion S25FL204K support, Antony Pavlov
    • Re: [PATCH] mtd: m25p80: add Spansion S25FL204K support, Sascha Hauer
• [PATCH 0/3] state: add support for fixed size strings, Marc Kleine-Budde
  • [PATCH v2 1/3] parameter: allow setting of string parameters of zero length, Marc Kleine-Budde
  • [PATCH v2 2/3] state: struct variable_type::import: remove const from node argument, Marc Kleine-Budde
  • [PATCH v2 3/3] state: add support for fixed length strings, Marc Kleine-Budde
• [PATCH] crypto: digest: provide static inline no-ops if digest is disabled, Marc Kleine-Budde
  • Re: [PATCH] crypto: digest: provide static inline no-ops if digest is disabled, Sascha Hauer
• [PATCH 0/2] state: add support for fixed size strings, Marc Kleine-Budde
  • [PATCH 1/2] parameter: allow setting of string parameters of zero length, Marc Kleine-Budde
  • [PATCH 2/2] state: add support for fixed length strings, Marc Kleine-Budde
• [PATCH 0/2] state: Documentation updates, Marc Kleine-Budde
  • [PATCH 1/2] state: Documentation: the backend properties are not optional (anymore), Marc Kleine-Budde
  • [PATCH 2/2] state: Documentation: fix dts code example, Marc Kleine-Budde
  • Re: [PATCH 0/2] state: Documentation updates, Sascha Hauer
• [PATCH 0/3] state: cleanup uint8 support, Marc Kleine-Budde
  • [PATCH 2/3] state: uint8: use %u as format string, Marc Kleine-Budde
  • [PATCH 3/3] state: uint8: add range check for uint8, Marc Kleine-Budde
  • [PATCH 1/3] state: Documentation: add newly implemented "uint8" types., Marc Kleine-Budde
  • Re: [PATCH 0/3] state: cleanup uint8 support, Sascha Hauer
• [PATCH 1/2] memtest: skip memory region smaller than one page, Renaud Barbier
  • Re: [PATCH 1/2] memtest: skip memory region smaller than one page, Sascha Hauer
• [PATCH] Documentation: fix typo, Juergen Borleis
  • Re: [PATCH] Documentation: fix typo, Sascha Hauer
• [PATCH] scripts/omap_signGP: Fix image size in GP header, Wadim Egorov
  • Re: [PATCH] scripts/omap_signGP: Fix image size in GP header, Sascha Hauer
• barebox picotcp integration (2015.06.14), Antony Pavlov
  • Re: barebox picotcp integration (2015.06.14), Sascha Hauer
    • Re: barebox picotcp integration (2015.06.14), Antony Pavlov
      • Re: barebox picotcp integration (2015.06.14), Sascha Hauer
        • Re: barebox picotcp integration (2015.06.14), Antony Pavlov
          • Re: barebox picotcp integration (2015.06.14), Sascha Hauer
• [PATCH] ARM: MXS: ocotp: Register a separate device, Sascha Hauer
• [PATCH 1/6] video: stmfb: Add device tree support, Sascha Hauer
  • [PATCH 2/6] video: Add backlight support, Sascha Hauer
  • [PATCH 3/6] video: Add PWM backlight support, Sascha Hauer
    • Re: [PATCH 3/6] video: Add PWM backlight support, Marc Kleine-Budde
  • [PATCH 4/6] ARM: i.MX28: Add PWM clk support, Sascha Hauer
  • [PATCH 5/6] PWM: Allow multiple PWMs per device node, Sascha Hauer
  • [PATCH 6/6] PWM: Add MXS PWM support, Sascha Hauer
• [RFC] Barebox shutdown hooks, Herve Codina
  • Re: [RFC] Barebox shutdown hooks, Sascha Hauer
• i.MX FCB NAND boot updates, Sascha Hauer
  • [PATCH 06/10] imx-bbu-nand-fcb: Use barebox partition instead of whole device, Sascha Hauer
  • [PATCH 09/10] imx-bbu-nand-fcb: Erase whole partition, Sascha Hauer
  • [PATCH 05/10] imx-bbu-nand-fcb: Fix debug messages, Sascha Hauer
  • [PATCH 01/10] ARM: dts: Karo tx6: increase barebox partition to 4MB, Sascha Hauer
  • [PATCH 10/10] imx-bbu-nand-fcb: Split space for firmware in two equal regions, Sascha Hauer
  • [PATCH 02/10] mtd: partition: implement write_oob, Sascha Hauer
  • [PATCH 07/10] imx-bbu-nand-fcb: make available for i.MX28 aswell, Sascha Hauer
  • [PATCH 04/10] ARM: i.MX6: bbu nand: Move to common place, Sascha Hauer
  • [PATCH 03/10] filetype: Add filetype for MXS bootstream, Sascha Hauer
  • [PATCH 08/10] imx-bbu-nand-fcb: Let DBBT start at page 1, Sascha Hauer
• Add barebox remote control, Sascha Hauer
  • [PATCH 2/4] barebox remote control, Sascha Hauer
    • Re: [PATCH 2/4] barebox remote control, Peter Korsgaard
      • Re: [PATCH 2/4] barebox remote control, Sascha Hauer
  • [PATCH 4/4] host side for barebox remote control, Sascha Hauer
  • [PATCH 1/4] Add Reliable Asynchronous Transfer Protocol, Sascha Hauer
    • Re: [PATCH 1/4] Add Reliable Asynchronous Transfer Protocol, Peter Korsgaard
      • Re: [PATCH 1/4] Add Reliable Asynchronous Transfer Protocol, Sascha Hauer
        • Re: [PATCH 1/4] Add Reliable Asynchronous Transfer Protocol, Peter Korsgaard
          • Re: [PATCH 1/4] Add Reliable Asynchronous Transfer Protocol, Sascha Hauer
  • [PATCH 3/4] include pyserial trunk, Sascha Hauer
    • Re: [PATCH 3/4] include pyserial trunk, Uwe Kleine-König
• [PATCH 1/2] images: Add file size check for PBLX files, Wadim Egorov
  • [PATCH 2/2] ARM: OMAP: Add max file size for PBLX images, Wadim Egorov
• [PATCH] clk: of: fix clk_of_table generation, Sascha Hauer
• [RFC] PCI: skip pci host bridge as early as possible, Antony Pavlov
  • Re: [RFC] PCI: skip pci host bridge as early as possible, Lucas Stach
    • Re: [RFC] PCI: skip pci host bridge as early as possible, Antony Pavlov
      • Re: [RFC] PCI: skip pci host bridge as early as possible, Lucas Stach
        • Re: [RFC] PCI: skip pci host bridge as early as possible, Antony Pavlov
• [PATCH] net: Set the actual ethaddr in register_preset_mac_address(), Wadim Egorov
  • Re: [PATCH] net: Set the actual ethaddr in register_preset_mac_address(), Sascha Hauer
    • Re: [PATCH] net: Set the actual ethaddr in register_preset_mac_address(), Wadim Egorov
      • AW: [PATCH] net: Set the actual ethaddr in register_preset_mac_address(), Gabor Janak (g.janak@xxxxxxxxxx)
      • Re: [PATCH] net: Set the actual ethaddr in register_preset_mac_address(), Sascha Hauer
        • Re: [PATCH] net: Set the actual ethaddr in register_preset_mac_address(), Wadim Egorov
• [PATCH v3] image: am335x: Generate SPI MLO images, Wadim Egorov
  • Re: [PATCH v3] image: am335x: Generate SPI MLO images, Sascha Hauer
• Add functions for (de)activating consoles and for setting baudrate, Sascha Hauer
  • [PATCH 04/12] console: When switching baudrate print console name, Sascha Hauer
  • [PATCH 03/12] console: Add console_get_by_name, Sascha Hauer
  • [PATCH 09/12] loadxy: use console_set_baudrate, Sascha Hauer
  • [PATCH 08/12] loadx: ignore -c option, Sascha Hauer
  • [PATCH 02/12] console: Add functions to get/set baudrate, Sascha Hauer
  • [PATCH 10/12] loadb: use console_get_baudrate, Sascha Hauer
  • [PATCH 11/12] loadb: Use console_set_baudrate, Sascha Hauer
  • [PATCH 06/12] loadxy: Use console_get_by_name, Sascha Hauer
  • [PATCH 05/12] usb: gadget: serial: Use console_set_active to activate console, Sascha Hauer
  • [PATCH 12/12] loadb: ignore -c option, Sascha Hauer
  • [PATCH 01/12] console: Add functions to get/set active state of console, Sascha Hauer
  • [PATCH 07/12] loadxy: use console_get_baudrate, Sascha Hauer
  • Re: Add functions for (de)activating consoles and for setting baudrate, Sascha Hauer
• v2015.06.0 ...and a new website, Sascha Hauer
  • Re: v2015.06.0 ...and a new website, Holger Schurig
    • Re: v2015.06.0 ...and a new website, Sascha Hauer
  • Re: v2015.06.0 ...and a new website, Antony Pavlov
    • Re: v2015.06.0 ...and a new website, Sascha Hauer
      • Re: v2015.06.0 ...and a new website, Holger Schurig
        • Re: v2015.06.0 ...and a new website, Sascha Hauer
          • Re: v2015.06.0 ...and a new website, Holger Schurig
            • Re: v2015.06.0 ...and a new website, Sascha Hauer
      • Re: v2015.06.0 ...and a new website, Antony Pavlov
• [PATCH] crc16: Make buffer argument const, Sascha Hauer