Hi Zoli,
On Fri, Aug 21, 2015 at 02:32:31PM +0200, Zoltán Sebök wrote:
> My issue is a bit different than this, but I don't know who to contact
> instead. However, the same thing is, that I get this error message...
>
> stat /dev/nand0.xload.bb: No such file or directory
>
> ...when tying to erase the MLO partition (nand0.xload.bb) of the NAND
> flash. This is from *inside a script, using this line:*
>
> cp /boot/swm/MLO /dev/nand0.xload.bb
>
> This is the first step my script does after mounting the SD card. It's
> purpose is a complete NAND flash update task.
>
> Maybe important: The script that I use for the flashing isn't starting
> directly via /env/init. Instead of that it sits on the SD card's FAT
> partition and is being invoked by another script which is located in
> /env/init.
>
> When I alter my script to your solution...
>
> cp /boot/swm/MLO /dev/nand0.xload
>
> ...it drops the same error. My script has error checking, so it stops at
> this point.
>
> Same on all other partitions:
> cp /boot/swm/barebox.bin /dev/nand0.barebox.bb
> cp /boot/swm/linuximage /dev/nand0.kernel.bb
>
> When I invoke my original flash script manually inside barebox, everything
> goes fine.
>
> So, what's the matter with barebox?
>
> I am new to linux especially learnt about barebox just a few days ago, so
> please explain in details, what to do to get this working from inside a
> script.
Make sure that the 'addpart' command runs before any other command that
attempts to access /dev/nand0.*.bb.
baruch
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch@xxxxxxxxxx - tel: +972.2.679.5364, http://www.tkos.co.il -
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
