On Wed, 26 Aug 2015 14:23:13 +0200
Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote:
> On Tue, Aug 25, 2015 at 06:45:21PM +0300, Antony Pavlov wrote:
> > On Tue, 25 Aug 2015 15:59:58 +0300
> > Peter Mamonov <pmamonov@xxxxxxxxx> wrote:
> >
> > > From: Kuo-Jung Su <dantesu@xxxxxxxxxxxxxxxx>
> > >
> > > 1. The 'index' of ehci_submit_root() is not always > 0.
> > >
> > > e.g.
> > > While it gets invoked from usb_get_descriptor(),
> > > the 'index' is always a '0'. (See ch.9 of USB2.0)
> > >
> > > 2. The PORTSC register is not always required, and thus it
> > > should only report a port error when necessary.
> > > It would cause a port scan failure if the ehci_submit_root()
> > > always gets terminated by a port error.
> > >
> > > Signed-off-by: Kuo-Jung Su <dantesu@xxxxxxxxxxxxxxxx>
> > > Signed-off-by: Peter Mamonov <pmamonov@xxxxxxxxx>
> > > ---
> > > drivers/usb/host/ehci-hcd.c | 38 ++++++++++++++++++++++++--------------
> > > 1 file changed, 24 insertions(+), 14 deletions(-)
> > >
> > > diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
> > > index 58c22db..1146b71 100644
> > > --- a/drivers/usb/host/ehci-hcd.c
> > > +++ b/drivers/usb/host/ehci-hcd.c
> > > @@ -476,13 +476,8 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> > > int len, srclen;
> > > uint32_t reg;
> > > uint32_t *status_reg;
> > > + int port = le16_to_cpu(req->index);
> > >
> > > - if (le16_to_cpu(req->index) >= CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
> > > - dev_err(ehci->dev, "The request port(%d) is not configured\n",
> > > - le16_to_cpu(req->index) - 1);
> > > - return -1;
> > > - }
> > > - status_reg = (uint32_t *)&ehci->hcor->or_portsc[le16_to_cpu(req->index) - 1];
> > > srclen = 0;
> > >
> > > dev_dbg(ehci->dev, "req=%u (%#x), type=%u (%#x), value=%u, index=%u\n",
> > > @@ -493,6 +488,21 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> > > typeReq = req->request | (req->requesttype << 8);
> > >
> > > switch (typeReq) {
> > > + case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8):
> > > + case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
> > > + case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
> > > + if (!port || port > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
> > > + printf("The request port(%d) is not configured\n", port - 1);
> > > + return -1;
> > > + }
> > > + status_reg = (uint32_t *)&ehci->hcor->or_portsc[port - 1];
> > > + break;
> > > + default:
> > > + status_reg = NULL;
> > > + break;
> > > + }
> > > +
> > > + switch (typeReq) {
> > > case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
> > > switch (le16_to_cpu(req->value) >> 8) {
> > > case USB_DT_DEVICE:
> > > @@ -571,7 +581,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> > > if (reg & EHCI_PS_OCA)
> > > tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT;
> > > if (reg & EHCI_PS_PR &&
> > > - (ehci->portreset & (1 << le16_to_cpu(req->index)))) {
> > > + (ehci->portreset & (1 << port))) {
> > > int ret;
> > > /* force reset to complete */
> > > reg = reg & ~(EHCI_PS_PR | EHCI_PS_CLEAR);
> > > @@ -581,7 +591,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> > > tmpbuf[0] |= USB_PORT_STAT_RESET;
> > > else
> > > dev_err(ehci->dev, "port(%d) reset error\n",
> > > - le16_to_cpu(req->index) - 1);
> > > + port - 1);
> > > }
> > > if (reg & EHCI_PS_PP)
> > > tmpbuf[1] |= USB_PORT_STAT_POWER >> 8;
> > > @@ -608,7 +618,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> > > tmpbuf[2] |= USB_PORT_STAT_C_ENABLE;
> > > if (reg & EHCI_PS_OCC)
> > > tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT;
> > > - if (ehci->portreset & (1 << le16_to_cpu(req->index)))
> > > + if (ehci->portreset & (1 << port))
> > > tmpbuf[2] |= USB_PORT_STAT_C_RESET;
> > >
> > > srcptr = tmpbuf;
> > > @@ -634,7 +644,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> > > EHCI_PS_IS_LOWSPEED(reg)) {
> > > /* Low speed device, give up ownership. */
> > > dev_dbg(ehci->dev, "port %d low speed --> companion\n",
> > > - req->index - 1);
> > > + port - 1);
> > > reg |= EHCI_PS_PO;
> > > ehci_writel(status_reg, reg);
> > > break;
> > > @@ -651,7 +661,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> > > */
> > > ehci_powerup_fixup(ehci);
> > > mdelay(50);
> > > - ehci->portreset |= 1 << le16_to_cpu(req->index);
> > > + ehci->portreset |= 1 << port;
> > > /* terminate the reset */
> > > ehci_writel(status_reg, reg & ~EHCI_PS_PR);
> > > /*
> > > @@ -663,10 +673,10 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> > > 2 * 1000);
> > > if (!ret)
> > > ehci->portreset |=
> > > - 1 << le16_to_cpu(req->index);
> > > + 1 << port;
> > > else
> > > dev_err(ehci->dev, "port(%d) reset error\n",
> > > - le16_to_cpu(req->index) - 1);
> > > + port - 1);
> > >
> > > }
> > > break;
> > > @@ -698,7 +708,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> > > reg |= EHCI_PS_OCC;
> > > break;
> > > case USB_PORT_FEAT_C_RESET:
> > > - ehci->portreset &= ~(1 << le16_to_cpu(req->index));
> > > + ehci->portreset &= ~(1 << port);
> > > break;
> > > default:
> > > dev_dbg(ehci->dev, "unknown feature %x\n", le16_to_cpu(req->value));
> > > --
> > > 2.1.4
> > >
> >
> >
> > Actually this patch combines two U-boot patches:
> >
> > * usb: ehci: prevent bad PORTSC register access (http://lists.denx.de/pipermail/u-boot/2013-May/154319.html)
> > * usb: Add new command to set USB 2.0 port test modes (http://lists.denx.de/pipermail/u-boot/2013-March/148104.html)
>
> Not really. This patch contains only the parts of "usb: Add new command
> to set USB 2.0 port test modes" which are necessary to make this one
> apply. I splitted this up to two patches while applying with the patch
> below.
>
> Sascha
>
> -----------------------------8<-----------------------
>
> From 484a1fb56890fee13a73070e0d868a3349a47c19 Mon Sep 17 00:00:00 2001
> From: Kuo-Jung Su <dantesu@xxxxxxxxxxxxxxxx>
Author: Julius Werner <jwerner@xxxxxxxxxxxx>
> Date: Tue, 25 Aug 2015 15:59:58 +0300
> Subject: [PATCH 2/3] usb: ehci: replace multiple use of
> le16_to_cpu(req->index) with variable
>
> This is part of U-Boot commit:
>
> 7d9aa8f usb: Add new command to set USB 2.0 port test modes
>
> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> ---
> drivers/usb/host/ehci-hcd.c | 19 ++++++++++---------
> 1 file changed, 10 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
> index 0e7c595..8a6bbc9 100644
> --- a/drivers/usb/host/ehci-hcd.c
> +++ b/drivers/usb/host/ehci-hcd.c
> @@ -475,10 +475,11 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> int len, srclen;
> uint32_t reg;
> uint32_t *status_reg;
> + int port = le16_to_cpu(req->index);
>
> if (le16_to_cpu(req->index) >= CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
> dev_err(ehci->dev, "The request port(%d) is not configured\n",
> - le16_to_cpu(req->index) - 1);
> + port - 1);
> return -1;
> }
> status_reg = (uint32_t *)&ehci->hcor->or_portsc[le16_to_cpu(req->index) - 1];
> @@ -570,7 +571,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> if (reg & EHCI_PS_OCA)
> tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT;
> if (reg & EHCI_PS_PR &&
> - (ehci->portreset & (1 << le16_to_cpu(req->index)))) {
> + (ehci->portreset & (1 << port))) {
> int ret;
> /* force reset to complete */
> reg = reg & ~(EHCI_PS_PR | EHCI_PS_CLEAR);
> @@ -580,7 +581,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> tmpbuf[0] |= USB_PORT_STAT_RESET;
> else
> dev_err(ehci->dev, "port(%d) reset error\n",
> - le16_to_cpu(req->index) - 1);
> + port - 1);
> }
> if (reg & EHCI_PS_PP)
> tmpbuf[1] |= USB_PORT_STAT_POWER >> 8;
> @@ -607,7 +608,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> tmpbuf[2] |= USB_PORT_STAT_C_ENABLE;
> if (reg & EHCI_PS_OCC)
> tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT;
> - if (ehci->portreset & (1 << le16_to_cpu(req->index)))
> + if (ehci->portreset & (1 << port))
> tmpbuf[2] |= USB_PORT_STAT_C_RESET;
>
> srcptr = tmpbuf;
> @@ -633,7 +634,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> EHCI_PS_IS_LOWSPEED(reg)) {
> /* Low speed device, give up ownership. */
> dev_dbg(ehci->dev, "port %d low speed --> companion\n",
> - req->index - 1);
> + port - 1);
> reg |= EHCI_PS_PO;
> ehci_writel(status_reg, reg);
> break;
> @@ -650,7 +651,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> */
> ehci_powerup_fixup(ehci);
> mdelay(50);
> - ehci->portreset |= 1 << le16_to_cpu(req->index);
> + ehci->portreset |= 1 << port;
> /* terminate the reset */
> ehci_writel(status_reg, reg & ~EHCI_PS_PR);
> /*
> @@ -662,10 +663,10 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> 2 * 1000);
> if (!ret)
> ehci->portreset |=
> - 1 << le16_to_cpu(req->index);
> + 1 << port;
> else
> dev_err(ehci->dev, "port(%d) reset error\n",
> - le16_to_cpu(req->index) - 1);
> + port - 1);
>
> }
> break;
> @@ -697,7 +698,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
> reg |= EHCI_PS_OCC;
> break;
> case USB_PORT_FEAT_C_RESET:
> - ehci->portreset &= ~(1 << le16_to_cpu(req->index));
> + ehci->portreset &= ~(1 << port);
> break;
> default:
> dev_dbg(ehci->dev, "unknown feature %x\n", le16_to_cpu(req->value));
> --
> 2.5.0
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
