[PATCH 3/6] PPC/PCM030: enable USB/OHCI pin support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This change in the port config register enables the USB/OHCI support and
makes USB work on the PCM030's regular development baseboard.

Signed-off-by: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
---
 arch/ppc/boards/pcm030/pcm030.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/ppc/boards/pcm030/pcm030.c b/arch/ppc/boards/pcm030/pcm030.c
index c1b0c3f..fe0f046 100644
--- a/arch/ppc/boards/pcm030/pcm030.c
+++ b/arch/ppc/boards/pcm030/pcm030.c
@@ -142,7 +142,7 @@ void initdram (int board_type)
 	/* Setup pin multiplexing */
 
 	/* PSC6=UART, PSC3=UART ; Ether=100MBit with MD */
-	*(vu_long *)MPC5XXX_GPS_PORT_CONFIG = 0x00558c10;
+	*(vu_long *)MPC5XXX_GPS_PORT_CONFIG = 0x00559c10;
 	*(vu_long *)MPC5XXX_CS_BURST = 0x00000000;
 	*(vu_long *)MPC5XXX_CS_DEADCYCLE = 0x33333333;
 
-- 
2.1.4


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux