Antony, Since it's RFC, should I apply this series? Sascha On Mon, Sep 21, 2015 at 02:23:43AM +0300, Antony Pavlov wrote: > This patchseries adds necessary AR9331 SoC low level initialization routines. > The patchseries makes it possible to use barebox as a first stage loader > on the Black Swift board and, I suppose, other widespread AR9331-based boards. > > The patchseries is heavily based on Oleksij Rempel's work on barebox for TP-Link MR3020. > > TODOs: > > * add TP-Link MR3020 support (see http://openocd.zylin.com/gitweb?p=openocd.git;a=commitdiff;h=f59d2d9ecfee8899df531b87b7acaa468725f238); > * clean up Black Swift GPIO code (pbl_reg_set (1 << 18), 0xb80600ac); > * check macros names linux kernel source compartibility; > * DT compatible string vendor "smartlx" appears un-documented. > The site http://www.smartlx.ru/ is suspended. > > > Changes since RFC v1: > > * add UART initialization routune for DEBUG_LL and NMON; > * add macros for GPIO_FUNCTION_1 register initialization; > * add ar71xx GPIO driver. > > > Antony Pavlov (9): > MIPS: ar933x: pbl: add pbl_ar9331_ddr2_config macro > MIPS: mach-ath79: add pbl_ar9331_uart_enable macro > MIPS: mach-ath79: add debug_ll_ar9331_init macro > MIPS: ath79: add black-swift board support > MIPS: add black-swift_defconfig > gpio: add ath79-gpio driver for Atheros MIPS SoCs > MIPS: ath79: use gpiolib > MIPS: dts: ar9331.dtsi: add gpio > WIP: MIPS: black-swift: use GPIO > > Oleksij Rempel (1): > MIPS: ar933x: pbl: add pbl_ar9331_pll macro > > arch/mips/Kconfig | 1 + > arch/mips/Makefile | 1 + > arch/mips/boards/black-swift/Makefile | 1 + > arch/mips/boards/black-swift/board.c | 27 ++++ > .../black-swift/include/board/board_pbl_start.h | 41 ++++++ > arch/mips/boot/start.S | 2 + > arch/mips/configs/black-swift_defconfig | 45 +++++++ > arch/mips/dts/ar9331.dtsi | 10 ++ > arch/mips/dts/black-swift.dts | 60 +++++++++ > arch/mips/include/asm/pbl_macros.h | 32 +++++ > arch/mips/mach-ath79/Kconfig | 6 + > arch/mips/mach-ath79/include/mach/ar71xx_regs.h | 41 ++++++ > arch/mips/mach-ath79/include/mach/debug_ll.h | 29 ++++ > arch/mips/mach-ath79/include/mach/pbl_macros.h | 139 ++++++++++++++++++++ > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-ath79.c | 146 +++++++++++++++++++++ > 16 files changed, 582 insertions(+) > create mode 100644 arch/mips/boards/black-swift/Makefile > create mode 100644 arch/mips/boards/black-swift/board.c > create mode 100644 arch/mips/boards/black-swift/include/board/board_pbl_start.h > create mode 100644 arch/mips/configs/black-swift_defconfig > create mode 100644 arch/mips/dts/black-swift.dts > create mode 100644 arch/mips/mach-ath79/include/mach/pbl_macros.h > create mode 100644 drivers/gpio/gpio-ath79.c > > -- > 2.5.0 > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
