U-Boot V2 Development (Barebox)
[Prev Page][Next Page]
- [PATCH 1/3] Samsung/serial: move the decision about an improved UART into Kconfig
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/3] Samsung/serial: unify UCON register settings
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] ARM/Samsung: remaining clean up...
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] Add JTAG bitbang driver
- From: "Wjatscheslaw Stoljarski (Slawa)" <wjatscheslaw.stoljarski@xxxxxxxxxxxx>
- Re: [PATCH] i.MX53 boards: notify clocksource after init_lowlevel
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM/Samsung: more clean up...
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] ARM: move exception vector table to exceptions.S
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] mc13xxx: Added dummy definitions if CONFIG_MFD_MC13XXX is not set
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Makefile: update barebox version if CONFIG_KALLSYMS is not set
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH/master] ARM/MXS: pull-up and bitkeeper must be handled differently
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Booting kernel from FAT partition on beagle board
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 8/9] ARM: Separate assembler functions into their own section
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 8/9] ARM: Separate assembler functions into their own section
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] Makefile: update barebox version if CONFIG_KALLSYMS is not set
- From: Svetlana Khafizova <sv.khafizova@xxxxxxxxx>
- [PATCH] i.MX53 boards: notify clocksource after init_lowlevel
- From: "Wjatscheslaw Stoljarski (Slawa)" <wjatscheslaw.stoljarski@xxxxxxxxxxxx>
- Re: [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 7/9] Samsung/serial: move the decision about an improved UART into Kconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/1] compressed: rename barebox target to zbarebox and zbarebox.bin
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 1/1] compressed: rename barebox target to zbarebox and zbarebox.bin
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 1/1] compressed: rename barebox target to zbarebox and zbarebox.bin
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/1] compressed: rename barebox target to zbarebox and zbarebox.bin
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: AT91SAM9263-ek - Kernel panic
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 7/7] compressed image: add gzip support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/7] compressed image: factorise compressor type
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/7] decompress_unlzo: define decompress_unlzo as decompress
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/7] decompressor: import malloc/free implementation for linux 3.4
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/7] stddev: make it selectable via Kconfig
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 5/7] ARM: add early malloc support needed by the decompressor
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 0/7 V2] compressed image update
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- AT91SAM9263-ek - Kernel panic
- From: Stutz Sven <stutzsven@xxxxxx>
- [PATCH 1/1] compressed: rename barebox target to zbarebox and zbarebox.bin
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Booting kernel from FAT partition on beagle board
- From: Bernhard Walle <bernhard@xxxxxxxxx>
- [PATCH 3/7] compressed image: factorise compressor type
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 7/7] compressed image: add gzip support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 6/7] compressed: allow to link only what is needed
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/7] decompress_unlzo: define decompress_unlzo as decompress
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 5/7] ARM: add early malloc support needed by the decompressor
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/7] decompressor: import malloc/free implementation for linux 3.4
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/7] stddev: make it selectable via Kconfig
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] lib/Kconfig: Fix alignment of arrows in label
- From: Bernhard Walle <bernhard@xxxxxxxxx>
- [PATCH 0/7] compressed inmage update
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 0/7] compressed image update
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/8] ARM/Samsung: add GPIO handling support for the S3C6410 SoC
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 8/8] ARM/Samsung: add the Tiny6410 platform as the second user of the S3C6410 SoC
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 3/8] ARM/Samsung: add the clock tree support for the S3C6410 SoC
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 7/8] ARM/Samsung: add the Mini6410 platform as the first user of the S3C6410 SoC
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 5/8] ARM/Samsung: add generic S3C6410 SoC specific functions
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/8] ARM/Samsung: add S3C6410 SoC iomap
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] Addd the Samsung S3C6410 SoC to Barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 6/8] ARM/Samsung: add the S3C6410 SoC
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/8] ARM/Samsung: adapt the generic timer driver to support the S3C6410 SoC
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] mc13xxx: Hide struct mc13xxx from board support code
- From: Alexander Shiyan <shc_work@xxxxxxx>
- [PATCH 2/3] mc13xxx: Hide struct mc13xxx from board support code
- From: Alexander Shiyan <shc_work@xxxxxxx>
- [PATCH 3/3] PCM038: Added setup for OTG host pins
- From: Alexander Shiyan <shc_work@xxxxxxx>
- [PATCH 1/3] mc13xxx: Added dummy definitions if CONFIG_MFD_MC13XXX is not set
- From: Alexander Shiyan <shc_work@xxxxxxx>
- [PATCH 6/9] Samsung/serial: there is no need to ifdef the slot table
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 7/9] Samsung/serial: move the decision about an improved UART into Kconfig
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 3/9] Samsung/serial: remove more ugly ifdef lines
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/9] ARM/Samsung: List only really supported S3C24xx SoCs
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 8/9] Samsung/serial: unify UCON register settings
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] ARM/Samsung: more clean up...
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/9] ARM/Samsung: follow the name style of the other source files in this directory
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 9/9] Samsung/serial: make the clock source configureable
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 5/9] Samsung/serial: there is no need to ifdef these register defines
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 4/9] Samsung/serial: make the code more readable
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 8/9] ARM: Separate assembler functions into their own section
- From: Johannes Stezenbach <js@xxxxxxxxx>
- Re: [PATCH 9/9] Add compressed image support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 9/9] Add compressed image support
- From: Johannes Stezenbach <js@xxxxxxxxx>
- barebox spi test
- From: christian.buettner@xxxxxxx
- [PATCH/master] ARM/MXS: pull-up and bitkeeper must be handled differently
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 1/1] piggy.lzo.S: fix out of tree build
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/1] piggy.lzo.S: fix out of tree build
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [RFC 4/7] MIPS: malta: add YAMON-style GT64120 memory map
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [RFC 7/7] bootm: add very basic ELF support on MIPS (stealed from kexec)
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [RFC 6/7] MIPS: qemu-malta: add KSEG0 memory region
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [RFC 5/7] MIPS: malta: make KSEG0 uncached
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [RFC 3/7] MIPS: malta: add bogus lowlevel init
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [RFC 4/7] MIPS: malta: add YAMON-style GT64120 memory map
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [RFC 2/7] MIPS: add the initial support for lowlevel init
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [WIP] add very basic ELF support on MIPS
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [RFC 1/7] MIPS: move start.S code to .text_entry section
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- Re: [PATCH] ARM: add the vendor 'FriendlyARM' to its board's directory names
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re[2]: [PATCH 1/6] mc13xxx: Define maximum SPI clock frequency global to driver
- From: Alexander Shiyan <shc_work@xxxxxxx>
- Re: [PATCH 1/6] mc13xxx: Define maximum SPI clock frequency global to driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re[2]: [PATCH 3/6] mc13xxx: Added dummy definition for mc13xxx_get() if CONFIG_MFD_MC13XXX is not set
- From: Alexander Shiyan <shc_work@xxxxxxx>
- Re[2]: [PATCH 1/6] mc13xxx: Define maximum SPI clock frequency global to driver
- From: Alexander Shiyan <shc_work@xxxxxxx>
- Re: USB On PCM043?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] serial_ns16550: change the driver's name
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Compressed barebox image support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH/master] ARM/Samsung: A required fix and a cleanup
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/6] mc13xxx: Define maximum SPI clock frequency global to driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Added SDR-size auto detection.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3 v2] gpmc: Add reset to gpmc_generic_init
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/3] ARM/Samsung: unify device registration for the S3C24XX SoCs
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH/master] ARM/Samsung: A required fix and a cleanup
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 3/3] NAND/Samsung: remove a leftover from architeture clean ups
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/3] ARM/Samsung: be able to include the nand header multiple times
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] serial_ns16550: change the driver's name
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- Re: USB On PCM043?
- From: Jerry Kirk <jkirk865@xxxxxxxxx>
- Re: [PATCH 8/9] ARM: Separate assembler functions into their own section
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 9/9] Add compressed image support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Compressed barebox image support
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH] ARM/Samsung: add the vendor FriendlyARM to the board's directory name
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] ARM: add the vendor 'FriendlyARM' to its board's directory names
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 6/6] PCM038: Read UID from fuses and pass this value to kernel as serial number
- From: Alexander Shiyan <shc_work@xxxxxxx>
- Re[2]: [PATCH 6/6] PCM038: Read UID from fuses and pass this value to kernel as serial number
- From: Alexander Shiyan <shc_work@xxxxxxx>
- Re: [PATCH 9/9] Add compressed image support
- From: Johannes Stezenbach <js@xxxxxxxxx>
- Re: [PATCH 6/6] PCM038: Read UID from fuses and pass this value to kernel as serial number
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] pca-a-l1: added memory device for int. 60kB RAM.
- From: Jürgen Kilb <j.kilb@xxxxxxxxx>
- Re: [PATCH 3/6] mc13xxx: Added dummy definition for mc13xxx_get() if CONFIG_MFD_MC13XXX is not set
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/6] mc13xxx: Define maximum SPI clock frequency global to driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 9/9] Add compressed image support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 9/9] Add compressed image support
- From: Johannes Stezenbach <js@xxxxxxxxx>
- Re: USB On PCM043?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Compressed barebox image support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- USB On PCM043?
- From: Jerry Kirk <jkirk865@xxxxxxxxx>
- [PATCH 5/6] PCM970: Add MMC support
- From: Alexander Shiyan <shc_work@xxxxxxx>
- [PATCH 4/6] tx51: Unused mc13xxx.h include removed
- From: Alexander Shiyan <shc_work@xxxxxxx>
- [PATCH 3/6] mc13xxx: Added dummy definition for mc13xxx_get() if CONFIG_MFD_MC13XXX is not set
- From: Alexander Shiyan <shc_work@xxxxxxx>
- [PATCH 6/6] PCM038: Read UID from fuses and pass this value to kernel as serial number
- From: Alexander Shiyan <shc_work@xxxxxxx>
- [PATCH 2/6] i.MX: Removed unused declaration for imx_iim_get_mac
- From: Alexander Shiyan <shc_work@xxxxxxx>
- [PATCH 1/6] mc13xxx: Define maximum SPI clock frequency global to driver
- From: Alexander Shiyan <shc_work@xxxxxxx>
- Re: Compressed barebox image support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Fix compile error loady command, without loadb.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] add possibility to mark blocks as bad during write
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: ST Chipsets support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 9/9] Add compressed image support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 8/9] ARM: Separate assembler functions into their own section
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 8/9] ARM: Separate assembler functions into their own section
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] pca-a-l1: added memory device for int. 60kB RAM.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] OMAP GPMC NAND: use buswidth from GPMC
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] Fix compile error loady command, without loadb.
- From: Christian Kapeller <christian.kapeller@xxxxxxxxxx>
- Re: [PATCH 8/9] ARM: Separate assembler functions into their own section
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- ST Chipsets support
- From: Amine THADI <amine.thadi@xxxxxxxxx>
- [PATCH] add possibility to mark blocks as bad during write
- From: Juergen Kilb <J.Kilb@xxxxxxxxx>
- [PATCH] Add /dev/urandom device.
- From: Juergen Kilb <J.Kilb@xxxxxxxxx>
- Re: [PATCH 1/3] OMAP GPMC NAND: use buswidth from GPMC
- From: Jan Weitzel <J.Weitzel@xxxxxxxxx>
- [PATCH 8/9] ARM: Separate assembler functions into their own section
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 9/9] Add compressed image support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 7/9] ARM boards: Use _text rather than TEXT_BASE
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Compressed barebox image support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 6/9] ARM ep93xx: Get rid of special handling in linker file
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/9] lzo: Allow for static inlining
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 4/9] ARM: remove exception vectors from boards
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 5/9] ARM startup: calculate offset instead of runtime address
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/9] ARM lds: remove unused got
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/9] ARM: remove board linker script option
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/3 v2] gpmc: Add reset to gpmc_generic_init
- From: Jan Weitzel <j.weitzel@xxxxxxxxx>
- [PATCH 1/3 v2] OMAP GPMC NAND: use buswidth from GPMC
- From: Jan Weitzel <j.weitzel@xxxxxxxxx>
- Re: [PATCH 1/3] OMAP GPMC NAND: use buswidth from GPMC
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] gpmc: Add reset to gpmc_generic_init
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: AT91SAM9263-EK
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: AT91SAM9263-EK
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCHv5] Enable a way to provide the reason for "being here"
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] phyCARD-A-L1: Create xload configuration.
- From: Juergen Kilb <J.Kilb@xxxxxxxxx>
- [PATCH] omap_hsmmc: Hack allert! Add delay in omap_hsmmc.
- From: Juergen Kilb <J.Kilb@xxxxxxxxx>
- [PATCH] pca-a-l1: added memory device for int. 60kB RAM.
- From: Juergen Kilb <J.Kilb@xxxxxxxxx>
- [PATCH] Added SDR-size auto detection.
- From: Juergen Kilb <J.Kilb@xxxxxxxxx>
- [PATCH 1/3] OMAP GPMC NAND: use buswidth from GPMC
- From: Jan Weitzel <j.weitzel@xxxxxxxxx>
- [PATCH 0/3] omap gpmc nand autodetect
- From: Jan Weitzel <j.weitzel@xxxxxxxxx>
- [PATCH 2/3] gpmc: Add reset to gpmc_generic_init
- From: Jan Weitzel <j.weitzel@xxxxxxxxx>
- [RFC 3/3] mtd omap nand: reconfigure buswidth
- From: Jan Weitzel <j.weitzel@xxxxxxxxx>
- AT91SAM9263-EK
- From: Stutz Sven <stutzsven@xxxxxx>
- Re: Board's naming style
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Board's naming style
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/4] ARM/Samsung: add support to detect the reset source
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/4] Enable a way to provide the reason for "being here"
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 3/4] ARM/i.MX: add support to detect the reset source
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv5] Enable a way to provide the reason for "being here"
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 4/4] ARM/MXS: add reset cause detection
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 0/2] imx: add matrix keypad (kpp) input driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] commands/crc: assert newline after output with big offsets
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] arm: support booting of uimages with as barebox payload.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] arm: support booting of uimages with as barebox payload.
- From: Christian Kapeller <christian.kapeller@xxxxxxxxxx>
- Re: [PATCH] arm: support booting of uimages with as barebox payload.
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] arm: support booting of uimages with as barebox payload.
- From: Christian Kapeller <christian.kapeller@xxxxxxxxxx>
- Antwort: RE: Antwort: Re: Antwort: Re: Antwort: Re: Antwort: Re: barebox image size
- From: christian.buettner@xxxxxxx
- RE: Antwort: Re: Antwort: Re: Antwort: Re: Antwort: Re: barebox image size
- From: "Marc Reilly" <marc@xxxxxxxxxxxxxxx>
- Antwort: Re: Antwort: Re: Antwort: Re: Antwort: Re: barebox image size
- From: christian.buettner@xxxxxxx
- [PATCH] imx51: fix pad definition used for fec communication.
- From: Christian Kapeller <christian.kapeller@xxxxxxxxxx>
- Re: [PATCH] commands/crc: assert newline after output with big offsets
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: Antwort: Re: Antwort: Re: Antwort: Re: barebox image size
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- Re: [PATCH/Master] ARM/MXS: the GPIO bitkeeper enable logic is inverse to the pullup enable logic
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2] usb: gadget: enable for MXS
- From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] tx51: Disable kallsyms. It prevents the board from booting.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- RE: Atmel AT91 SD/MMC clock too fast
- From: "George Pontis" <GPontis@xxxxxx>
- Re: [PATCH 2/2] tx51: Disable kallsyms. It prevents the board from booting.
- From: Christian Kapeller <christian.kapeller@xxxxxxxxxx>
- Re: barebox image size
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH 2/2] tx51: Disable kallsyms. It prevents the board from booting.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] tx51: ensure eth phy resets properly by driving reset pin explicitly.
- From: Christian Kapeller <christian.kapeller@xxxxxxxxxx>
- Antwort: Re: Antwort: Re: Antwort: Re: Antwort: Re: Antwort: Re: barebox image size
- From: christian.buettner@xxxxxxx
- Re: Antwort: Re: Antwort: Re: Antwort: Re: Antwort: Re: barebox image size
- From: Christian Kapeller <christian.kapeller@xxxxxxxxxx>
- Re: [PATCH 1/2] tx51: ensure eth phy resets properly by driving reset pin explicitly.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: tx51 ethernet regression
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Antwort: Re: Antwort: Re: Antwort: Re: Antwort: Re: barebox image size
- From: christian.buettner@xxxxxxx
- Re: Antwort: Re: Antwort: Re: Antwort: Re: barebox image size
- From: Christian Kapeller <christian.kapeller@xxxxxxxxxx>
- Re: tx51 ethernet regression
- From: Christian Kapeller <christian.kapeller@xxxxxxxxxx>
- Antwort: Re: Antwort: Re: Antwort: Re: barebox image size
- From: christian.buettner@xxxxxxx
- Re: tx51 ethernet regression
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 1/2] input: Add i.MX matrix keypad driver
- From: Christian Kapeller <christian.kapeller@xxxxxxxxxx>
- [PATCH 2/2] input: add i.MX51 platform code for matrix keypad driver
- From: Christian Kapeller <christian.kapeller@xxxxxxxxxx>
- [PATCH 0/2] imx: add matrix keypad (kpp) input driver
- From: Christian Kapeller <christian.kapeller@xxxxxxxxxx>
- tx51 ethernet regression
- From: Christian Kapeller <christian.kapeller@xxxxxxxxxx>
- Re: Antwort: Re: Antwort: Re: barebox image size
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 0/2] Misc Karo TX51 fixes
- From: Christian Kapeller <christian.kapeller@xxxxxxxxxx>
- [PATCH 2/2] tx51: Disable kallsyms. It prevents the board from booting.
- From: Christian Kapeller <christian.kapeller@xxxxxxxxxx>
- [PATCH 1/2] tx51: ensure eth phy resets properly by driving reset pin explicitly.
- From: Christian Kapeller <christian.kapeller@xxxxxxxxxx>
- Antwort: Re: Antwort: Re: barebox image size
- From: christian.buettner@xxxxxxx
- Re: Antwort: Re: barebox image size
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: barebox image size
- From: Eric Bénard <eric@xxxxxxxxxx>
- Antwort: Re: barebox image size
- From: christian.buettner@xxxxxxx
- Re: AT91SAM9263-EK
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: barebox image size
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- barebox image size
- From: christian.buettner@xxxxxxx
- Re: [PATCH 1/4] Enable a way to provide the reason for "being here"
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Atmel AT91 SD/MMC clock too fast
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v2] usb: gadget: enable for MXS
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 4/5] at24: add I2C eeprom for 24cl02
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/5] imx_fec: Allow driver clients to supply MAC address
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 02/18] ARM/Samsung: unify device registration for the S3C24XX SoCs
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Atmel AT91 SD/MMC clock too fast
- From: "George Pontis" <GPontis@xxxxxx>
- Re: [PATCH 11/18] ARM/Samsung: add generic lowlevel init
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 02/18] ARM/Samsung: unify device registration for the S3C24XX SoCs
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 05/18] Samsung/serial: make the clock source configureable
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] filetype: add forgotten mips barebox filetype_str
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] usb: gadget: enable for MXS
- From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
- Re: [PATCH v2] mtd: fix 'write: Invalid argument' while writing to nand-bb devices
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Atmel SD/MMC info error (report only)
- From: gpontis@xxxxxxxxxxx
- [PATCH 5/5] misc: new driver: isl22316 digital potentiometer
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 3/5] imx35: mmc clock has 6 bit divider, not 3_3
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 2/5] imx35: 6-bit divider helper
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 4/5] at24: add I2C eeprom for 24cl02
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- Various patches for imx35, fec, at24 driver and misc
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 1/5] imx_fec: Allow driver clients to supply MAC address
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH] filetype: add forgotten mips barebox filetype_str
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH 15/18] ARM/Samsung: add GPIO handling support for the S3C6410 SoC
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 18/18] ARM/Samsung: add the Mini6410 platform as the first user of the S3C6410 SoC
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 14/18] ARM/Samsung: add the clock tree support for the S3C6410 SoC
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 03/18] ARM/Samsung: follow the name style of the other source files in this directory
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 16/18] ARM/Samsung: add generic S3C6410 SoC specific functions
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 12/18] ARM/Samsung: add S3C6410 SoC iomap
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 09/18] Samsung/serial: move the decision about an improved UART into Kconfig
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 10/18] Samsung/serial: unify UCON register settings
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 17/18] ARM/Samsung: add the S3C6410 SoC
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 02/18] ARM/Samsung: unify device registration for the S3C24XX SoCs
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 11/18] ARM/Samsung: add generic lowlevel init
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 01/18] ARM/Samsung: be able to include the nand header multiple times
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [RFC] Inclusion of the Samsung S3C6410 SoC
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 13/18] ARM/Samsung: adapt the generic timer driver to support the S3C6410 SoC
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 08/18] Samsung/serial: there is no need to ifdef the slot table
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 04/18] Samsung/serial: remove more ugly ifdef lines
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 07/18] Samsung/serial: there is no need to ifdef these register defines
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 05/18] Samsung/serial: make the clock source configureable
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 06/18] Samsung/serial: make the code more readable
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- AT91SAM9263-EK
- From: Stutz Sven <stutzsven@xxxxxx>
- AT91SAM9263-EK
- From: Stutz Sven <stutzsven@xxxxxx>
- [PATCH 3/4] ARM/i.MX: add support to detect the reset source
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv4] Enable a way to provide the reason for "being here"
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/4] Enable a way to provide the reason for "being here"
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 4/4] ARM/MXS: add reset cause detection
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/4] ARM/Samsung: add support to detect the reset source
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] ARM/MXS: add reset cause detection
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] usb: gadget: enable for MXS
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] ARM/MXS: add reset cause detection
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 2/4] ARM/Samsung: add support to detect the reset source
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/4] Enable a way to provide the reason for "being here"
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 4/4] ARM/MXS: add reset cause detection
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv3] Enable a way to provide the reason for "being here"
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 3/4] ARM/i.MX: add support to detect the reset source
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH v2] mtd: fix 'write: Invalid argument' while writing to nand-bb devices
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: Enable unaligned accesses on armv6 and later
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH] mtd: fix 'write: Invalid argument' while writing to nand-bb devices
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH/Master] ARM/MXS: the GPIO bitkeeper enable logic is inverse to the pullup enable logic
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: Flashing automatically the default environment
- From: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
- Patch for 16bit atmel NAND
- From: Benoit RAT <benoit@xxxxxxxxxxxxx>
- Re: Flashing automatically the default environment
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: Flashing automatically the default environment
- From: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
- Re: Flashing automatically the default environment
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Flashing automatically the default environment
- From: Patrick <kpa_info@xxxxxxxx>
- Re: [PATCH 1/3] string: add strim for ONFI code
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] MIPS: malta: register memory bank
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] MIPS: remove unused processor-specific constants and macros
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] mtd: fix bad block ioctls
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] ARM: Enable unaligned accesses on armv6 and later
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] MIPS: remove unused processor-specific constants and macros
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH] MIPS: malta: register memory bank
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH] drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- Re: [PATCH 01/30] USB: Fix typo tranceiver -> transceiver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 25/30] ARM at91: remove const
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 29/30] mtd: scan_write_bbt is only needed with mtd write support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 24/30] mtd omap: add prefix to omap specific decode_bch function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 30/30] UBI: select crc32 support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 27/30] uimage: select uncompress and crc32 support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 17/30] gpio: add static inlines for gpio_request/gpio_free
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 21/30] ARM i.MX: rename internal-nand-boot.c to external-nand-boot.c
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 28/30] I2C i.MX: disable driver for i.MX1
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 26/30] ARM at91: fix typo in define
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/30] input gpio buttons: needs poller API
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] nand_base: add ONFI flash detection
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 23/30] mtd: remove dead disk-on-chip support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 15/30] kconfig: fix IS_ENABLED to not require all options to be defined
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 13/30] mtd nand: Fix compilation without bbt support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/30] USB: Fix typo tranceiver -> transceiver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 16/30] ARM Samsung S5P: Disable support until we have a board
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/30] ARM at91rm9200: Add missing include
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/30] ARM: let armlinux_set_* depend on the correct option
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 11/30] pwm PXA: Compile only on PXA
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/30] bootm: Fix undefined reference to of_fix_tree
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 22/30] ARM i.MX: No external NAND boot on i.MX1
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 07/30] exec command: Fix compilation
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/30] loadb: fix compilation
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 14/30] led: remove gpio include
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/30] uimage: introduce UIMAGE Kconfig symbol
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 19/30] usb gadget at91: Use correct include
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 18/30] ARM: remove mx1ads leftovers
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 12/30] fs nfs: depend on net
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 20/30] usb gadget: Enable gadget support only when a driver is available
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 10/30] mfd TWL4030: Fix Kconfig dependencies
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/30] Add missing semicolons at end of EXPORT_SYMBOL
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/3] mtd: remove dead disk-on-chip support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/3] USB: Fix typo tranceiver -> transceiver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/3] ARM: remove mx1ads leftovers
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] nand_base: add ONFI flash detection
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/3] nand_imx: update to support onfi & 4k flashs
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 2/3] nand_base: add ONFI flash detection
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 1/3] string: add strim for ONFI code
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH 2/3] defenv-2: Add usage information for bootargs scripts
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] defenv-2: Add usage information for bootargs scripts
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 2/3] defenv-2: Add usage information for bootargs scripts
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/3] hush getopt: shift argv arguments
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/3] defenv-2: improve boot script
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] defenv-2 updates
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] mem md: bail out without arguments
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCHv2 0/2] Add support for the Crystalfontz CFA-10036 module
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: starting ethernet switch in SMI mode
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCHv2 0/2] Add support for the Crystalfontz CFA-10036 module
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] Add support for the Crystalfontz CFA-10036 board
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] Add bootargs script to boot on ext filesystems
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] Add support for the Crystalfontz CFA-10036 board
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- starting ethernet switch in SMI mode
- From: Vanalme Filip <F.Vanalme@xxxxxxxxxxx>
- Re: [PATCH] Avoid SDRAM access crash
- From: Steve Schefter <steve@xxxxxxxxxxxxx>
- Re: [PATCH] ARM mxs: Clear USB boot mode during startup
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] scripts/mkublheader: add program to produce an UBL image header
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 0/2] Very minimal support S5PV210 board (Tiny210)
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Avoid SDRAM access crash
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] ARM tqma53: switch to new environment
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] Add support for the Crystalfontz CFA-10036 board
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] ARM tqma53: Add standard flash header
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] ARM i.MX51 babbage: Use correct select for new environment
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] fs: fix standard zero, full devices
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Avoid SDRAM access crash
- From: Steve Schefter <steve@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] Add support for kernel and device tree images stored in a partition
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH] fs: fix standard zero, full devices
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] Add support for kernel and device tree images stored in a partition
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Avoid SDRAM access crash
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] Add support for kernel and device tree images stored in a partition
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- [PATCH] Avoid SDRAM access crash
- From: steve@xxxxxxxxxxxxx
- Re: panda board crash when detecting usb devices
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- [PATCH 1/2] S5P DRAM support
- From: Alexey Galakhov <agalakhov@xxxxxxxxx>
- [PATCH 2/2] Add FriendlyArm Tiny210 board (S5PV210)
- From: Alexey Galakhov <agalakhov@xxxxxxxxx>
- [PATCH 0/2] Very minimal support S5PV210 board (Tiny210)
- From: Alexey Galakhov <agalakhov@xxxxxxxxx>
- [PATCH 2/2] Add support for the Crystalfontz CFA-10036 board
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] Add support for kernel and device tree images stored in a partition
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: patch for SDRAM remap bug
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- patch for SDRAM remap bug
- From: Steve Schefter <steve@xxxxxxxxxxxxx>
- Re: [PATCH] Unused files removed
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- v2012.07.0
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] commands: uncompress: fix description
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: panda board crash when detecting usb devices
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: panda board crash when detecting usb devices
- From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
- Re: panda board crash when detecting usb devices
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- panda board crash when detecting usb devices
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- [PATCH] commands: uncompress: fix description
- From: Alexander Shiyan <shc_work@xxxxxxx>
- [PATCH] Unused files removed
- From: Alexander Shiyan <shc_work@xxxxxxx>
- Re: [PATCH] ARM mxs: Clear USB boot mode during startup
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: How to start barebox on Freescale iMX28 EVK
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH] ARM mxs: Clear USB boot mode during startup
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] Initial BeagleBone support for second stage
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- Re: How to start barebox on Freescale iMX28 EVK
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] byteorder: fix {BIG,LITTLE}_ENDIAN defines
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: How to start barebox on Freescale iMX28 EVK
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] byteorder: fix {BIG,LITTLE}_ENDIAN defines
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH 1/2] ARM defconfigs: Use TLSF malloc on defconfigs getting too big
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/2] ARM at91sam9m10g45ek: Enable lzo decompression
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] arm defconfig binary size reduction
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2 3/5] clocksource: move the NSEC_PER_SEC constant to common header
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] byteorder: fix {BIG,LITTLE}_ENDIAN defines
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] byteorder: fix {BIG,LITTLE}_ENDIAN defines
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v2 2/5] byteorder: add sanity check
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH v2 5/5] MIPS: XBurst: use clocks_calc_mult_shift() for JZ4755's clocksource
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH v2 4/5] MIPS: XBurst: fix the JZ4755's clocksource input frequency value
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH v2 0/5] MIPS: XBurst: fix the JZ4755's clocksource
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH v2 1/5] byteorder: fix {BIG,LITTLE}_ENDIAN defines
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH v2 3/5] clocksource: move the NSEC_PER_SEC constant to common header
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH] scripts/mkublheader: add program to produce an UBL image header
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- Re: Booting PhyTec PCM043/IMX35 from USB/SD-Card
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Booting PhyTec PCM043/IMX35 from USB/SD-Card
- From: "Peter Kuennemann@Crane-Soft" <pkue@xxxxxxxxxxxxx>
- [PATCH 1/2] ARM i.MX23 usb: move to SoC specific functions
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/2] ARM i.MX28 usb: Add USBPHY support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/3] menu: factor out a function to print an entry
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/3] dos partitions: enable disk size guessing only for bios disks
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/3] net: Use dev_name directly
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] some small binary size improvement patches
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Booting PhyTec PCM043/IMX35 from USB/SD-Card
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 3/4] MIPS: XBurst: fix the JZ4755's clocksource input frequency value
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] byteorder: fix {BIG,LITTLE}_ENDIAN defines
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 4/4] MIPS: XBurst: use clocks_calc_mult_shift() for JZ4755's clocksource
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH 3/4] MIPS: XBurst: fix the JZ4755's clocksource input frequency value
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH 2/4] clocksource: move the NSEC_PER_SEC constant to common header
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH 1/4] byteorder: fix {BIG,LITTLE}_ENDIAN defines
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH 0/4] MIPS: XBurst: fix the JZ4755's clocksource
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- Re: Booting PhyTec PCM043/IMX35 from USB/SD-Card
- From: "Peter Kuennemann@Crane-Soft" <pkue@xxxxxxxxxxxxx>
- byteorder problem
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH 1/2] Add a simple watchdog framework
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv4] Add a simple watchdog 'framework' to Barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/2] ARM/MXS: add a watchdog driver for i.MX28
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH] drivers/nor/m25p80.c: fix erase loop for unaligned addresses
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] drivers/base: bail out if request_iomem_region fails
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: is errno supposed to be positive or negative?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: is errno supposed to be positive or negative?
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: is errno supposed to be positive or negative?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- is errno supposed to be positive or negative?
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH] commands/crc: assert newline after output with big offsets
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] commands/crc: add a trailing newline after output of checksum
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] commands/crc: add a trailing newline after output of checksum
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: Add basic support for the OMAP-L138/DA850
- From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
- [PATCH 10/10] partitions: Make 64bit capable
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/10] use loff_t for file offsets
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/10] make cdev 64bit capable
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/10] memory commands: Make 64bit capable
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] 64bit file support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 07/10] make st_size in struct stat 64 bit
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/10] make parse_area_spec arguments loff_t
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/10] introduce strtoull_suffix function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/10] make memory display 64bit capable
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/10] nand-bb: bb->offset may become a 64bit type
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/10] mtd: fix arguments to bad block ioctls
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 08/12] drivers/mtd/nand: add driver for the davinci NAND flash controller
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 06/12] mach-davinci: support the USB 1.1 host controller (based on OHCI)
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 05/12] mach-davinci: add support for the PSC (Power and Sleep Controller)
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 04/12] mach-davinci: setup pin mux for da850
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 03/12] mach-davinci: add pin mux support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] rewritten memtest command
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2] drivers/net: add designware driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Add basic support for the OMAP-L138/DA850
- From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
- Re: Add basic support for the OMAP-L138/DA850
- From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
- [PATCH 08/12] drivers/mtd/nand: add driver for the davinci NAND flash controller
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH 01/12] mach-davinci: add platform and minimal board file for HMI10
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH 10/12] drivers/spi: add driver for the davinci SPI master
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH 11/12] board hmi10: enable support for SPI
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH 04/12] mach-davinci: setup pin mux for da850
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH 12/12] board hmi10: add default config
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH 07/12] mach-davinci: add support for AEMIF (NAND flash)
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH 05/12] mach-davinci: add support for the PSC (Power and Sleep Controller)
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH 06/12] mach-davinci: support the USB 1.1 host controller (based on OHCI)
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH 03/12] mach-davinci: add pin mux support
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH 02/12] mach-davinci: add GPIO support
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH 09/12] board hmi10: enable support for NAND
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- Add basic support for the OMAP-L138/DA850
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH 2/2] ARM/MXS: add a watchdog driver for i.MX28
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/2] Add a simple watchdog framework
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv3] Add a simple watchdog 'framework' to Barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM i.MX51 babbage: add mci1
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- [PATCH 11/12] fs FAT: fix warning: Using plain integer as NULL pointer
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/12] define __user empty
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 07/12] USB ohci: Fix sparse warnings
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/12] ARM i.MX speed: sparse fixes
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 12/12] of: Fix usage of 0 as NULL pointer
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/12] tlsf: Use NULL instead of 0 for returning NULL pointers
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/12] MMC i.MX esdhc: Fix sparse warnings
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/12] ARM i.MX clocksource: put registers in iomem space
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/12] net smc911x: Use __iomem for register base
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 10/12] USB gadget fsl: Put registers into iomem space
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] sparse fixes
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/12] qsort: declare strcmp_compar publically
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/12] Do not use iomem space for dev_get_mem_region
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] remove dead rarpboot command
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM i.MX51 babbage: add mci1
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] fs/devfs.c: disallow write and erase if a partition is read-only
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] defaultenv/bin/init: skip autoboot if $autoboot_timeout is unset
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM i.MX51 babbage: add mci1
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- [PATCH v2] drivers/net: add designware driver
- From: Johannes Stezenbach <js@xxxxxxxxx>
- [PATCH] drivers/nor/m25p80.c: fix erase loop for unaligned addresses
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH] drivers/video: support three ways to select default video mode
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] Add a simple watchdog framework
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 2/5] openrisc: link to libgcc
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] Add a simple watchdog framework
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] print out resource_size_t correctly
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] Add a simple watchdog framework
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 3/5] mips: Add missing ffs include
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 4/5] nios2: Add missing ffs include
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 5/5] x86: Add missing ffs include
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/5] blackfin: add __ashrdi3
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/5] openrisc: link to libgcc
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] provide ffs and __ashrdi3 for all architectures
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] Add a simple watchdog framework
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] i.MX clko: Checking for clko-line properly
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] MIPS: XBurst: fix compiler warnings in reset-jz4750.c
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] sandbox: fix 64bit build
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] defaultenv/bin/init: skip autoboot if $autoboot_timeout is unset
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH] ARM i.MX51 babbage: add mci1
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] fs/devfs.c: disallow write and erase if a partition is read-only
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH] Makefile: echo size check error to stderr
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] MIPS: XBurst: fix compiler warnings in reset-jz4750.c
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- Re: SPI chip select problem
- From: Johannes Stezenbach <js@xxxxxxxxx>
- Re: SPI chip select problem
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH] i.MX clko: Checking for clko-line properly
- From: Alexander Shiyan <shc_work@xxxxxxx>
- Re: SPI chip select problem
- From: Johannes Stezenbach <js@xxxxxxxxx>
- SPI chip select problem
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH] x86 linux16 command: Add missing include
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] rzx50: add poweroff support
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- Re: [PATCH 2/2] rzx50: add poweroff support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] i.MX clko: Added support for more than one CLKO outputs
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2] mmuinfo: add a command do display the result of virtual to physical translation
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] complete: fix parameter complete with multiple '.'
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] Add next generation default environment template
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] fs: Fix file create bug when parent is not a directory
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] defaultenv-2 ifup: create network up state file for dhcp
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] fs tftp: Fix short file transfers
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/2] Add dirname command
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] add basename/dirname commands
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/2] Add basename command
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Regression for the Beagle Board
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- Regression for the Beagle Board
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCHv2] Add a simple watchdog 'framework' to Barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/2] Add a simple watchdog framework
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/2] ARM/MXS: add a watchdog driver for i.MX28
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH v2] mmuinfo: add a command do display the result of virtual to physical translation
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH 2/2] ARM/MXS: add a watchdog driver for i.MX28
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/2] Add a simple watchdog framework
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] Add a simple watchdog 'framework' to Barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] Add two architectures which can detect the reset source
- From: Roberto Nibali <rnibali@xxxxxxxxx>
- Re: [PATCH 2/2] Add two architectures which can detect the reset source
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] Add two architectures which can detect the reset source
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH] mtd nand: mxs: add missing include for mxs_reset_block
- From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] mx51-pdk: Move lowlevel_init before UART initialization
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] mmuinfo: add a command do display the result of virtual to physical translation
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] Add two architectures which can detect the reset source
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCHv2] ARM/MXS: free the watchdog from acting as a system reset source on demand
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] mmuinfo: add a command do display the result of virtual to physical translation
- From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
- [PATCH] mtd nand: mxs: add missing include for mxs_reset_block
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re[2]: [PATCH 2/2] mx51-pdk: Move lowlevel_init before UART initialization
- From: Alexander Shiyan <shc_work@xxxxxxx>
- [PATCH] openrisc: fix build due to redefined phys_size_t
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] blackfin: Fix build due to missing __raw_* io accessors
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 9/9] USB ehci: rework cache handling
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/9] USB core: device descriptor using dma_alloc
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 5/9] USB ehci: put fields of struct qTD directly into struct QH
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/9] USB core: Allocate tmpbuf using dma_alloc
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/9] USB core: allocate setup_packet using dma_alloc
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 8/9] partition: Use dma_alloc for allocating buffers
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 6/9] USB storage: use dma_alloc where appropriate
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 7/9] block: use dma_alloc to allocate buffers
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 4/9] USB ehci: Use dma coherent buffers for qh/qtd
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] more dma fixes
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] mx51-pdk: Move lowlevel_init before UART initialization
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/2] Add two architectures which can detect the reset source
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/2] Enable a way to provide the reason for "being here"
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv2] Enable a way to provide the reason for "being here"
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/2] ARM/MXS: remove the now obsolete mxs reset routine
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/2] ARM/MXS: add new way to reset the whole SoC
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv2] ARM/MXS: free the watchdog from acting as a system reset source on demand
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM/MXS: add new way to reset the whole SoC
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/2] mx51-pdk: Move lowlevel_init before UART initialization
- From: Alexander Shiyan <shc_work@xxxxxxx>
- [PATCH 1/2] Setup UART-pads via iomux interface
- From: Alexander Shiyan <shc_work@xxxxxxx>
- Re: [PATCH 1/2] Enable a way to provide the reason for "being here"
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] Enable a way to provide the reason for "being here"
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM/MXS: add new way to reset the whole SoC
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] Enable a way to provide the reason for "being here"
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] Enable a way to provide the reason for "being here"
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM/MXS: add new way to reset the whole SoC
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] Enable a way to provide the reason for "being here"
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] Enable a way to provide the reason for "being here"
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM/MXS: add new way to reset the whole SoC
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] Enable a way to provide the reason for "being here"
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] Add two architectures which can detect the reset source
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] Add two architectures which can detect the reset source
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] Add two architectures which can detect the reset source
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] Enable a way to provide the reason for "being here"
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 2/2] Add two architectures which can detect the reset source
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] Enable a way to provide the reason for "being here"
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/2] Enable a way to provide the reason for "being here"
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/2] ARM/MXS: add new way to reset the whole SoC
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/2] ARM/MXS: remove the now obsolete mxs reset routine
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] ARM/MXS: free the watchdog from acting as a system reset source on demand
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH v2 6/6] USB gadget: Fix dma memory allocations
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH v2 2/6] blackfin, mips, openrisc, ppc, sandbox, x86: add generic dma_alloc, dma_free inlines
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH v2 4/6] ARM mmu: add dma_alloc
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH v2 0/6] fix dma memory allocations, add dma_alloc/dma_free
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH v2 1/6] ARM mmu: don't use CONFIG_MMU to disable mmu code, there are static inline versions
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH v2 5/6] USB gadget fsl: request cacheline aligned buffer
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH v2 3/6] nios: add dma_alloc, asm/dma.h
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 6/6] drivers/net: add designware driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] poweroff: fix cmd_poweroff() arguments type
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH RFC] spi: add support for dual and quad IO modes
- From: Johannes Stezenbach <js@xxxxxxxxx>
- Re: [PATCH 6/6] drivers/net: add designware driver
- From: Johannes Stezenbach <js@xxxxxxxxx>
- Re: [PATCH 0/2] Small fixes
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: i.MX23/i.MX28, software reset feature
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH RFC] spi: add support for dual and quad IO modes
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 0/6] misc ethernet fixes and new driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 6/6] drivers/net: add designware driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 4/6] miidev: consistent md and mw on phy regs
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 0/6] fix dma memory allocations, add dma_alloc/dma_free
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 6/6] USB gadget: Fix dma memory allocations
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 4/6] blackfin, mips, openrisc, ppc, sandbox, x86: add transparent dma_alloc, dma_free inlines
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 5/6] USB gadget fsl: request cacheline aligned buffer
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 3/6] nios: add dma_alloc, dma_free and asm/dma.h
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 1/6] ARM mmu: don't use CONFIG_MMU to disable mmu code, there are static inline versions
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 0/6] fix dma memory allocations, add dma_alloc/dma_free
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 2/6] ARM mmu: introduce dma_alloc, dma_free
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- i.MX23/i.MX28, software reset feature
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 2/6] miidev: actually probe the PHY
- From: Johannes Stezenbach <js@xxxxxxxxx>
- Re: [PATCH 1/6] miidev: fix auto negotiation
- From: Johannes Stezenbach <js@xxxxxxxxx>
- Re: [PATCH 2/6] miidev: actually probe the PHY
- From: Roberto Nibali <rnibali@xxxxxxxxx>
- Re: [PATCH 1/6] miidev: fix auto negotiation
- From: Roberto Nibali <rnibali@xxxxxxxxx>
- [PATCH RFC] spi: add support for dual and quad IO modes
- From: Johannes Stezenbach <js@xxxxxxxxx>
- [PATCH 6/6] drivers/net: add designware driver
- From: Johannes Stezenbach <js@xxxxxxxxx>
- [PATCH 3/6] miidev: add support for 1000Mbit
- From: Johannes Stezenbach <js@xxxxxxxxx>
- [PATCH 5/6] eth: eth MAC addresses are six bytes
- From: Johannes Stezenbach <js@xxxxxxxxx>
- [PATCH 2/6] miidev: actually probe the PHY
- From: Johannes Stezenbach <js@xxxxxxxxx>
- [PATCH 0/6] misc ethernet fixes and new driver
- From: Johannes Stezenbach <js@xxxxxxxxx>
- [PATCH 4/6] miidev: consistent md and mw on phy regs
- From: Johannes Stezenbach <js@xxxxxxxxx>
- [PATCH 1/6] miidev: fix auto negotiation
- From: Johannes Stezenbach <js@xxxxxxxxx>
- How to start barebox on Freescale iMX28 EVK
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: How should a new internally developed board be handled?
- From: Jerry Kirk <jkirk865@xxxxxxxxx>
- [PATCH] poweroff: fix cmd_poweroff() arguments type
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH 2/2] Deal properly with scripts/bareboxenv-target
- From: Roberto Nibali <rnibali@xxxxxxxxx>
- [PATCH 1/2] Remove superfluous SYSCTL_RSTA
- From: Roberto Nibali <rnibali@xxxxxxxxx>
- [PATCH 0/2] Small fixes
- From: Roberto Nibali <rnibali@xxxxxxxxx>
- Re: [PATCH V2] arm: mxs: get MAC from OCOTP for MX28EVK
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- Re: [PATCH V2] arm: mxs: get MAC from OCOTP for MX28EVK
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH V2 8/8] arm: mxs: add write support for ocotp
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- [PATCH V2 7/8] arm: mxs: use consistent naming for #defines for ocotp
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- [PATCH V2 6/8] arm: mxs: refactor timeout routine for ocotp
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- [PATCH V2 3/8] arm: mxs: refactor access to power domain
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- [PATCH V2 5/8] arm: mxs: add functions to get/set vddio
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- [PATCH V2 4/8] arm: mxs: add POWER_BASE for MX28, too
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- [PATCH V2 2/8] arm: mxs: add imx_set_hclk
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- [PATCH V2 1/8] arm: mxs: make get_hclk result useable for upcoming set_hclk
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- [PATCH V2 0/8] arm: mxs: add ocotp write support
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- [PATCH V2] arm: mxs: get MAC from OCOTP for MX28EVK
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- Re: [PATCH 8/8] arm: mxs: add write support for ocotp
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 5/8] arm: mxs: add functions to get/set vddio
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] commands: add msleep command
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] i.MX51: Synchronize iomux header file from kernel
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: add 'poweroff' support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/2] ARM: initial ConnectCore® i.MX51 board support
- From: Alexander Shiyan <shc_work@xxxxxxx>
- [PATCH 1/2] i.MX51: Synchronize iomux header file from kernel
- From: Alexander Shiyan <shc_work@xxxxxxx>
- Re: [PATCH] commands: add msleep command
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] common: fix typo cammand_var_complete
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/2] rzx50: add poweroff support
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- add 'poweroff' support
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH 1/2] add 'poweroff' command
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH] common: fix typo cammand_var_complete
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- Re: [PATCH] commands: add msleep command
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH] commands: add msleep command
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- UnCorrectable RS-ECC Error
- From: Gabriel Tisan <gabriel.tisan@xxxxxxxxx>
- Re: Is Intel/Marvell PXA really ARMv4?
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
[Index of Archives]
[Linux Embedded]
[Linux USB Devel]
[Video for Linux]
[Linux SCSI]
[Samba]
[Yosemite News]