On Mon, Jun 18, 2012 at 04:47:54PM +0200, Johannes Stezenbach wrote: > Hi, > > I ported the designware ethernet driver from u-boot, it > only required minor changes and worked right away. > Since my hw has 1G ethernet I added support for this, > although speed is not so important in a boot loader it seemed > easier than to reconfigure the PHY for 100Mbit. > > Patches 4 and 5 may be a bit controversial. The motivation > for patch 4 is that took me some head scratching to get > debug read/write on PHY regs correct since md and mw worked > against my intuition on /dev/phy0. > The string in eth_set_ethaddr() confused me to think a string > would be passed to ->set_ethaddr(). Changing "unsigned char *adr" > to "u8 adr[6]" does not change the generated code but is IMHO > harder to misunderstand. I applied this series up to 5/6 for now. Thanks, it's always nice to see code cleanups. Sascha > > > Johannes > > drivers/net/Kconfig | 11 ++ > drivers/net/Makefile | 1 + > drivers/net/designware.c | 433 ++++++++++++++++++++++++++++++++++++++++++++++ > drivers/net/designware.h | 230 ++++++++++++++++++++++++ > drivers/net/miidev.c | 72 ++++++-- > include/miidev.h | 4 + > include/net.h | 8 +- > include/net/designware.h | 9 + > net/eth.c | 2 +- > net/net.c | 4 +- > 10 files changed, 752 insertions(+), 22 deletions(-) > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
