While a set bit enables the pullup (if exists) it disables the bitkeeper (if
exists). Both features are using the same register bit and only one of this
feature is present on a per pin base.
Signed-off-by: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
diff --git a/arch/arm/mach-mxs/iomux-imx.c b/arch/arm/mach-mxs/iomux-imx.c
index 9203588..784c506 100644
--- a/arch/arm/mach-mxs/iomux-imx.c
+++ b/arch/arm/mach-mxs/iomux-imx.c
@@ -125,7 +125,7 @@ void imx_gpio_mode(uint32_t m)
if (BK_PRESENT(m)) {
reg_offset = calc_pullup_reg(gpio_pin);
writel(0x1 << (gpio_pin % 32), IMX_IOMUXC_BASE + reg_offset +
- (GET_BITKEEPER(m) == 1 ? BIT_SET : BIT_CLR));
+ (GET_BITKEEPER(m) == 1 ? BIT_CLR : BIT_SET));
}
if (GET_FUNC(m) == IS_GPIO) {
--
Pengutronix e.K. | Juergen Beisert |
Linux Solutions for Science and Industry | http://www.pengutronix.de/ |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
