On Fri, Jul 13, 2012 at 11:35:39AM +0200, Stutz Sven wrote: > Hello everybody, > > > But everything without success. It's a little bit strange because > when I execute the command > bootm -v /dev/nand0.kernel.bb > First I get the following output > Barebox:/ bootm -v /dev/nand0.kernel.bb > Image Name: Linux-3.4.0 > OS: Linux > Architecture: ARM > Type: Kernel Image > Compression: uncompressed > Data Size: 2034784 Bytes = 1.9 MB > Load Address: 20008000 > Entry Point: 20008000 > err -74 > loading os image failed with Out of memory > > and if I try again the same command > Barebox:/ bootm -v /dev/nand0.kernel.bb > err -74 > Unknown OS filetype (try -f) > > also if I try to memcpy or uimage I always get this err 74. > > What is this Error 74 (-- Reset level 3)? -74 is EBADMSG, see include/asm-generic/errno.h. The nand driver throws this when it can't read due to ecc errors. Something seems wrong with your nand driver. I remember Jean-Christophe mentioned that the atmel nand support is currently broken. Could you please try if either: - barebox v2012.07.0 or - current master works for you? Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
