This configuration can be used to use barebox as
x-loader replacement.
Also the ECC-Mode is changed from SOFT to BCH8.
Signed-off-by: Juergen Kilb <J.Kilb@xxxxxxxxx>
---
arch/arm/boards/phycard-a-l1/pca-a-l1.c | 10 ++----
arch/arm/configs/phycard_a_l1_xload_defconfig | 43 +++++++++++++++++++++++++
arch/arm/mach-omap/Kconfig | 1 +
3 files changed, 47 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/configs/phycard_a_l1_xload_defconfig
diff --git a/arch/arm/boards/phycard-a-l1/pca-a-l1.c b/arch/arm/boards/phycard-a-l1/pca-a-l1.c
index 8fae405..a388f63 100644
--- a/arch/arm/boards/phycard-a-l1/pca-a-l1.c
+++ b/arch/arm/boards/phycard-a-l1/pca-a-l1.c
@@ -312,6 +312,7 @@ struct omap_hsmmc_platform_data pcaal1_hsmmc_plat = {
static int pcaal1_init_devices(void)
{
+ gpmc_generic_nand_devices_init(0, 16, OMAP_ECC_BCH8_CODE_HW, &omap3_nand_cfg);
#ifdef CONFIG_MCI_OMAP_HSMMC
add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL, OMAP_MMC1_BASE, SZ_4K,
IORESOURCE_MEM, &pcaal1_hsmmc_plat);
@@ -332,12 +333,7 @@ device_initcall(pcaal1_init_devices);
static int pcaal1_late_init(void)
{
- struct device_d *nand;
-
- gpmc_generic_nand_devices_init(0, 16, OMAP_ECC_SOFT, &omap3_nand_cfg);
-
- nand = get_device_by_name("nand0");
-
+#ifdef CONFIG_PARTITION
devfs_add_partition("nand0", 0x00000, 0x80000, DEVFS_PARTITION_FIXED, "x-loader");
dev_add_bb_dev("self_raw", "x_loader0");
@@ -346,7 +342,7 @@ static int pcaal1_late_init(void)
devfs_add_partition("nand0", 0x260000, 0x20000, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
-
+#endif
return 0;
}
late_initcall(pcaal1_late_init);
diff --git a/arch/arm/configs/phycard_a_l1_xload_defconfig b/arch/arm/configs/phycard_a_l1_xload_defconfig
new file mode 100644
index 0000000..30253cb
--- /dev/null
+++ b/arch/arm/configs/phycard_a_l1_xload_defconfig
@@ -0,0 +1,43 @@
+CONFIG_ARCH_OMAP=y
+CONFIG_OMAP_BUILD_IFT=y
+CONFIG_MACH_PCAAL1=y
+CONFIG_AEABI=y
+CONFIG_THUMB2_BAREBOX=y
+# CONFIG_CMD_ARM_CPUINFO is not set
+# CONFIG_ARM_EXCEPTIONS is not set
+CONFIG_ENVIRONMENT_VARIABLES=y
+CONFIG_TEXT_BASE=0x40200000
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x0000f000
+CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0x0000f000
+CONFIG_MEMORY_LAYOUT_FIXED=y
+CONFIG_STACK_BASE=0x4020F000
+CONFIG_STACK_SIZE=0xc00
+CONFIG_MALLOC_BASE=0x84000000
+CONFIG_MALLOC_SIZE=0x1000000
+CONFIG_MALLOC_DUMMY=y
+CONFIG_PROMPT="X-load pca-a-l1>"
+CONFIG_CBSIZE=128
+CONFIG_SHELL_NONE=y
+# CONFIG_ERRNO_MESSAGES is not set
+# CONFIG_TIMESTAMP is not set
+# CONFIG_CONSOLE_FULL is not set
+# CONFIG_DEFAULT_ENVIRONMENT is not set
+CONFIG_DRIVER_SERIAL_NS16550=y
+CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
+# CONFIG_SPI is not set
+CONFIG_MTD=y
+# CONFIG_MTD_WRITE is not set
+# CONFIG_MTD_OOB_DEVICE is not set
+CONFIG_NAND=y
+# CONFIG_NAND_ECC_SOFT is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+# CONFIG_NAND_ECC_HW_NONE is not set
+# CONFIG_NAND_BBT is not set
+CONFIG_NAND_OMAP_GPMC=y
+CONFIG_MCI=y
+CONFIG_MCI_STARTUP=y
+# CONFIG_MCI_WRITE is not set
+CONFIG_MCI_OMAP_HSMMC=y
+# CONFIG_FS_RAMFS is not set
+# CONFIG_FS_DEVFS is not set
+CONFIG_FS_FAT=y
diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
index 386c484..d735284 100644
--- a/arch/arm/mach-omap/Kconfig
+++ b/arch/arm/mach-omap/Kconfig
@@ -151,6 +151,7 @@ config MACH_PCM049
config MACH_PCAAL1
bool "Phytec phyCARD-A-L1"
select OMAP_CLOCK_ALL
+ select HAVE_NOSHELL
depends on ARCH_OMAP3
help
Say Y here if you are using a phyCARD-A-L1 PCA-A-L1
--
1.7.0.4
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
