On Thu, Jul 05, 2012 at 12:22:46PM +0200, Eric Bénard wrote:
> the code is taken from linux & u-boot implementations
> Validated on an i.MX53 which gives the following log :
> ONFI flash detected ... ONFI param page 0 valid
> NAND device: Manufacturer ID: 0x2c, Chip ID: 0x38 (Micron MT29F8G08ABABAWP), page size: 4096, OOB size: 224
>
> Signed-off-by: Eric Bénard <eric@xxxxxxxxxx>
> ---
> drivers/mtd/nand/nand_base.c | 174 ++++++++++++++++++++++++++++++++++++------
> include/linux/mtd/mtd-abi.h | 7 +-
> include/linux/mtd/nand.h | 74 ++++++++++++++++++-
> 3 files changed, 226 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> #ifdef CONFIG_MTD_WRITE
> /* Check for AND chips with 4 page planes */
> if (chip->options & NAND_4PAGE_ARRAY)
> @@ -1179,9 +1301,11 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
> if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
> chip->cmdfunc = nand_command_lp;
>
> - printk(KERN_INFO "NAND device: Manufacturer ID:"
> - " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, dev_id,
> - nand_manuf_ids[maf_idx].name, type->name);
> + printk("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s),"
> + " page size: %d, OOB size: %d\n",
> + *maf_id, dev_id, nand_manuf_ids[maf_idx].name,
> + chip->onfi_version ? chip->onfi_params.model : type->name,
> + mtd->writesize, mtd->oobsize);
Do we need to output writesize and oobsize here? 'devinfo nand0' will
give the same information.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
