It is a quite common setup to have a partition with all you need to boot from the bootloader, ie the kernel image, the device tree blob, etc. This patch introduces a new "file" location for these two images, which uses in turn the *_part and the new *_part_type variable specifying the fs type used by mount. Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> Cc: Brian Lilly <brian@xxxxxxxxxxxxxxxx> --- defaultenv/bin/boot | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/defaultenv/bin/boot b/defaultenv/bin/boot index 61b893a..26360ed 100644 --- a/defaultenv/bin/boot +++ b/defaultenv/bin/boot @@ -114,6 +114,12 @@ elif [ x$kernel_loc = xnand ]; then kdev="/dev/nand0.kernel.bb" elif [ x$kernel_loc = xdisk ]; then kdev="/dev/$kernel_part" +elif [ x$kernel_loc = xfile ]; then + if [ ! -d $kernel_part ]; then + mkdir $kernel_part + mount /dev/$kernel_part $kernel_part_type $kernel_part + fi + kdev="$kernel_part/$kernelimage" else echo "error: set kernel_loc to one of 'tftp', 'nfs', 'nand', 'nor' or 'disk'" exit 1 @@ -128,6 +134,12 @@ elif [ x$oftree_loc = xnand ]; then odev="/dev/nand0.oftree.bb" elif [ x$oftree_loc = xdisk ]; then odev="/dev/$oftree_part" +elif [ x$oftree_loc = xfile ]; then + if [ ! -d $oftree_part ]; then + mkdir $oftree_loc + mount /dev/$oftree_part $oftree_part_type $oftree_part + fi + odev="$oftree_part/$oftreeimage" fi [ x$odev = x ] || bootm_opt="$bootm_opt -o $odev" -- 1.7.9.5 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
