On Sun, Jul 22, 2012 at 05:29:44PM +0200, Bernhard Walle wrote: > Hi, > > Passing control to ARM Linux uImage handler > > Starting kernel at 0x80008000... > commandline: console=ttyO2,115200 vram=12M > omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi > root=/dev/mmcblk0p2 ro rootfstype=ext3 rootwait earlyprintk=ttyO2,115200 earlyprintk does not take options. Have you enabled earlyprintk support in your config? At least you should something then. > arch_number: 1546 > ------------------------------------------------------------ > > The same kernel boots fine using u-boot. I'm using Barebox 2012.07.0 and > u-boot 2012.07-rc1. > > Did I do something wrong? Or is that just a bug? What you tried should work, I can't see something obviously wrong. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
