U-Boot V2 Development (Barebox)

• Date Index

• v2018.09.0, Sascha Hauer
• unable to upload new file to tftp server, Toews, Dietrich
  • Re: unable to upload new file to tftp server, Sascha Hauer
    • RE: unable to upload new file to tftp server, Toews, Dietrich
• [PATCH] ARM: i.MX: make HAB certificate pathes explicitly overwritable, Sascha Hauer
• Re: Re: [PATCH 09/10] ARM: rpi: add raspberry pi 3 support, Martin Ortbauer
  • Re: Re: [PATCH 09/10] ARM: rpi: add raspberry pi 3 support, Roland Hieber
    • Re: Re: [PATCH 09/10] ARM: rpi: add raspberry pi 3 support, Lucas Stach
• [PATCH] arm: boards: phytec-som-am335x: Rename kernel image, Teresa Remmet
  • Re: [PATCH] arm: boards: phytec-som-am335x: Rename kernel image, Sascha Hauer
• [PATCH 0/2] add support for pca955x i2c led drivers, Oleg.Karfich
  • [PATCH 1/2] led: add pca955x led support, Oleg.Karfich
  • [PATCH 2/2] led: use max led value in case of led trigger, Oleg.Karfich
  • Re: [PATCH 0/2] add support for pca955x i2c led drivers, Sascha Hauer
• [PATCH v2] net: dhcp: add global variable for retries, Oleg.Karfich
  • Re: [PATCH v2] net: dhcp: add global variable for retries, Sascha Hauer
    • Re: [PATCH v2] net: dhcp: add global variable for retries, Oleg.Karfich
• [PATCH 0/4] make imx-usb-loader usable for unknown device IDs, Roland Hieber
  • [PATCH 2/4] scripts: imx-usb-loader: fail early if the USB device path does not match, Roland Hieber
  • [PATCH 1/4] scripts: imx-usb-loader: rename imx_device() to imx_device_by_usb_id(), Roland Hieber
  • [PATCH 4/4] scripts: imx-usb-loader: make i.MX6SoloX better to type, Roland Hieber
  • [PATCH 3/4] scripts: imx-usb-loader: allow use of unknown USB IDs, Roland Hieber
  • Re: [PATCH 0/4] make imx-usb-loader usable for unknown device IDs, Sascha Hauer
• [PATCH v2] scripts imx-image: add support for newer versions of "cst", Marc Kleine-Budde
  • Re: [PATCH v2] scripts imx-image: add support for newer versions of "cst", Sascha Hauer
• [PATCH 00/18] crypto: caam: Pull CAAM support improvements from Linux, Marcin Niestroj
  • [PATCH 01/18] crypto: caam - fix RNG init descriptor ret. code checking, Marcin Niestroj
  • [PATCH 03/18] crypto: caam - fix writing to JQCR_MS when using service interface, Marcin Niestroj
  • [PATCH 02/18] crypto: caam - fix warning in APPEND_MATH_IMM_u64, Marcin Niestroj
  • [PATCH 05/18] crypto: caam - add support for iMX6UL, Marcin Niestroj
  • [PATCH 04/18] crypto: caam - handle core endianness != caam endianness, Marcin Niestroj
  • [PATCH 06/18] crypto: caam - fix sparse warnings, Marcin Niestroj
  • [PATCH 08/18] crypto: caam - remove unreachable code in report_ccb_status(), Marcin Niestroj
  • [PATCH 07/18] crypto: caam - trivial code clean-up, Marcin Niestroj
  • [PATCH 09/18] crypto: caam - constify pointer to descriptor buffer, Marcin Niestroj
  • [PATCH 10/18] crypto: caam - avoid double inclusion in desc_constr.h, Marcin Niestroj
    • [PATCH 12/18] crypto: caam - fix incorrect define, Marcin Niestroj
    • [PATCH 11/18] crypto: caam - clean-up in caam_init_rng(), Marcin Niestroj
    • [PATCH 13/18] crypto: caam - constify key data, Marcin Niestroj
    • [PATCH 14/18] crypto: caam - fix endless loop when DECO acquire fails, Marcin Niestroj
    • [PATCH 17/18] crypto: caam - staticize caam_get_era(), Marcin Niestroj
    • [PATCH 16/18] crypto: caam - sync desc.h with Linux, Marcin Niestroj
    • [PATCH 15/18] crypto: caam - do not use mem and emi_slow clock for imx7x, Marcin Niestroj
    • [PATCH 00/18] crypto: caam: Pull CAAM support improvements from Linux, Marcin Niestroj
    • [PATCH 18/18] crypto: caam - allow retrieving 'era' from register, Marcin Niestroj
    • [PATCH 18/18] crypto: caam - allow retrieving 'era' from register, Marcin Niestroj
    • [PATCH 07/18] crypto: caam - trivial code clean-up, Marcin Niestroj
    • [PATCH 12/18] crypto: caam - fix incorrect define, Marcin Niestroj
    • [PATCH 03/18] crypto: caam - fix writing to JQCR_MS when using service interface, Marcin Niestroj
    • [PATCH 11/18] crypto: caam - clean-up in caam_init_rng(), Marcin Niestroj
    • [PATCH 13/18] crypto: caam - constify key data, Marcin Niestroj
    • [PATCH 17/18] crypto: caam - staticize caam_get_era(), Marcin Niestroj
    • [PATCH 14/18] crypto: caam - fix endless loop when DECO acquire fails, Marcin Niestroj
    • [PATCH 08/18] crypto: caam - remove unreachable code in report_ccb_status(), Marcin Niestroj
    • [PATCH 01/18] crypto: caam - fix RNG init descriptor ret. code checking, Marcin Niestroj
    • [PATCH 05/18] crypto: caam - add support for iMX6UL, Marcin Niestroj
    • [PATCH 16/18] crypto: caam - sync desc.h with Linux, Marcin Niestroj
    • [PATCH 09/18] crypto: caam - constify pointer to descriptor buffer, Marcin Niestroj
    • [PATCH 10/18] crypto: caam - avoid double inclusion in desc_constr.h, Marcin Niestroj
    • [PATCH 04/18] crypto: caam - handle core endianness != caam endianness, Marcin Niestroj
    • [PATCH 02/18] crypto: caam - fix warning in APPEND_MATH_IMM_u64, Marcin Niestroj
    • [PATCH 06/18] crypto: caam - fix sparse warnings, Marcin Niestroj
    • [PATCH 15/18] crypto: caam - do not use mem and emi_slow clock for imx7x, Marcin Niestroj
  • [PATCH 11/18] crypto: caam - clean-up in caam_init_rng(), Marcin Niestroj
  • [PATCH 13/18] crypto: caam - constify key data, Marcin Niestroj
  • [PATCH 16/18] crypto: caam - sync desc.h with Linux, Marcin Niestroj
  • [PATCH 17/18] crypto: caam - staticize caam_get_era(), Marcin Niestroj
  • [PATCH 10/18] crypto: caam - avoid double inclusion in desc_constr.h, Marcin Niestroj
  • [PATCH 15/18] crypto: caam - do not use mem and emi_slow clock for imx7x, Marcin Niestroj
  • [PATCH 14/18] crypto: caam - fix endless loop when DECO acquire fails, Marcin Niestroj
  • [PATCH 12/18] crypto: caam - fix incorrect define, Marcin Niestroj
  • [PATCH 18/18] crypto: caam - allow retrieving 'era' from register, Marcin Niestroj
  • Re: [PATCH 00/18] crypto: caam: Pull CAAM support improvements from Linux, Sascha Hauer
• [PATCH 0/5] ARM: imx: HAB improvements, Marcin Niestroj
  • [PATCH 2/5] ARM: imx: Update default image certificate for CST tool, Marcin Niestroj
  • [PATCH 1/5] scripts: imx: add optional argument to hab_blocks command, Marcin Niestroj
  • [PATCH 4/5] images: imx: Add targets for signed encrypted images, Marcin Niestroj
  • [PATCH 5/5] scripts: imx: Do not include autoconf.h, Marcin Niestroj
    • Re: [PATCH 5/5] scripts: imx: Do not include autoconf.h, Sascha Hauer
      • Re: [PATCH 5/5] scripts: imx: Do not include autoconf.h, Marcin Niestrój
        • Re: [PATCH 5/5] scripts: imx: Do not include autoconf.h, Sascha Hauer
  • [PATCH 3/5] scripts: imx: Support encrypted boot with HABv4, Marcin Niestroj
  • Re: [PATCH 0/5] ARM: imx: HAB improvements, Sascha Hauer
• [PATCH 0/4] Kindle i.MX50 improvements, Roland Hieber
  • [PATCH 1/4] pinctrl: imx-iomux-v3: fix compiler warning, Roland Hieber
    • Re: [PATCH 1/4] pinctrl: imx-iomux-v3: fix compiler warning, Sam Ravnborg
      • Re: [PATCH 1/4] pinctrl: imx-iomux-v3: fix compiler warning, Roland Hieber
        • Re: [PATCH 1/4] pinctrl: imx-iomux-v3: fix compiler warning, Sam Ravnborg
          • Re: [PATCH 1/4] pinctrl: imx-iomux-v3: fix compiler warning, Sascha Hauer
  • [PATCH 2/4] ARM: i.MX: Kindle 4/5 is based on Device Tree, select it in Kconfig, Roland Hieber
  • [PATCH 3/4] ARM: i.MX: add defconfig for the Kindle i.MX50 boards, Roland Hieber
  • [PATCH 4/4] Documentation: i.MX: update Kindle 4/5 board documentation, Roland Hieber
• [PATCH 0/3] extend dhcp functionality, Oleg.Karfich
  • [PATCH 1/3] net: dhcp: use private extension 224 also in discover requests, Oleg.Karfich
  • [PATCH 2/3] commands: dhcp: add parameter for private data, Oleg.Karfich
  • [PATCH 3/3] net: dhcp: add global variable for retries, Oleg.Karfich
    • Re: [PATCH 3/3] net: dhcp: add global variable for retries, Sascha Hauer
      • Re: [PATCH 3/3] net: dhcp: add global variable for retries, Oleg.Karfich
• [PATCH 1/5] driver: Adopt DMA mask concept from Linux, Andrey Smirnov
  • [PATCH 2/5] net: fec_imx: Specify that DMA is 32-bit only, Andrey Smirnov
  • [PATCH 3/5] mci: imx-esdhc: Specify that DMA is 32-bit only, Andrey Smirnov
  • [PATCH 4/5] net: fec_imx: Return EFAULT when DMA mapping fails, Andrey Smirnov
  • [PATCH 5/5] mci: imx-esdhc: Return EFAULT when DMA mapping fails, Andrey Smirnov
  • Re: [PATCH 1/5] driver: Adopt DMA mask concept from Linux, Sascha Hauer
• [PATCH 5/5] mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it, Andrey Smirnov
• [PATCH 0/5] RAVE SP driver fixes, Andrey Smirnov
  • [PATCH 2/5] mfd: rave-sp: Fix incorrectly specified checksum type, Andrey Smirnov
  • [PATCH 1/5] mfd: rave-sp: Remove unused defines, Andrey Smirnov
  • [PATCH 3/5] mfd: rave-sp: Add mapping for legacy EEPROM command, Andrey Smirnov
  • [PATCH 4/5] mfd: rave-sp: Add legacy watchdog ping command translation, Andrey Smirnov
  • Re: [PATCH 0/5] RAVE SP driver fixes, Sascha Hauer
• [PATCH] ratp: fix sending data that won't fit in a single RATP packet, Aleksander Morgado
  • Re: [PATCH] ratp: fix sending data that won't fit in a single RATP packet, Sascha Hauer
• TFTP improvements, Sascha Hauer
  • [PATCH 5/5] fs: tftp: improve file size handling, Sascha Hauer
  • [PATCH 3/5] fs: tftp: fix return value, Sascha Hauer
  • [PATCH 1/5] fs: tftp: overhaul debugging, Sascha Hauer
  • [PATCH 2/5] fs: tftp: fix memory hole, Sascha Hauer
  • [PATCH 4/5] fs: tftp: hide files which are actually not present on the server, Sascha Hauer
    • Re: [PATCH 4/5] fs: tftp: hide files which are actually not present on the server, Steffen Trumtrar
• [PATCH v2 1/2] scripts: imx: Add support for signed HDMI firmware, Andrey Smirnov
  • [PATCH v2 2/2] ARM: i.MX: xload: Add support for signed HDMI firmware, Andrey Smirnov
  • Re: [PATCH v2 1/2] scripts: imx: Add support for signed HDMI firmware, Sascha Hauer
• [PATCH v2] clk: i.MX: Port Linux clock tree for i.MX51 and i.MX53, Andrey Smirnov
  • Re: [PATCH v2] clk: i.MX: Port Linux clock tree for i.MX51 and i.MX53, Sascha Hauer
  • Re: [PATCH v2] clk: i.MX: Port Linux clock tree for i.MX51 and i.MX53, Sascha Hauer
    • Re: [PATCH v2] clk: i.MX: Port Linux clock tree for i.MX51 and i.MX53, Andrey Smirnov
• [PATCH] ARM: vf610dev: Change "Zodiac" to "ZII", Andrey Smirnov
  • Re: [PATCH] ARM: vf610dev: Change "Zodiac" to "ZII", Sascha Hauer
• [PATCH v3] lxc: add new package, Michael Grzeschik
  • Re: [PATCH v3] lxc: add new package, Sam Ravnborg
    • Re: [PATCH v3] lxc: add new package, Robert Schwebel
      • Re: [PATCH v3] lxc: add new package, Michael Grzeschik
• dwc2 USB host initialization issue, Bogdan Harjoc
• [PATCH] arm: mach-imx: remove unused header, Michael Grzeschik
  • Re: [PATCH] arm: mach-imx: remove unused header, Sascha Hauer
• [PATCH v2] ARM: i.MX: Reset OTG controller during startup, Michael Grzeschik
  • Re: [PATCH v2] ARM: i.MX: Reset OTG controller during startup, Sascha Hauer
• [PATCH 00/56] Update Barebox UBI, Teresa Remmet
  • [PATCH 04/56] UBI: Modify wrong comment in ubi_leb_map function., Teresa Remmet
  • [PATCH 02/56] UBI: Remove alloc_ai() slab name from parameter list, Teresa Remmet
  • [PATCH 03/56] UBI: Don't read back all data in ubi_eba_copy_leb(), Teresa Remmet
  • [PATCH 01/56] UBI: Fastmap: Fix memory leak while attaching, Teresa Remmet
  • [PATCH 12/56] ubi: Fix scan_fast() comment, Teresa Remmet
  • [PATCH 11/56] ubi: Make volume resize power cut aware, Teresa Remmet
  • [PATCH 14/56] ubi: Fix whitespace issue in count_fastmap_pebs(), Teresa Remmet
  • [PATCH 10/56] ubi: Fix early logging, Teresa Remmet
  • [PATCH 05/56] UBI: Clean up return in ubi_remove_volume(), Teresa Remmet
  • [PATCH 06/56] UBI: Set free_count to zero before walking through erase list, Teresa Remmet
  • [PATCH 09/56] ubi: Fix race condition between ubi device creation and udev, Teresa Remmet
  • [PATCH 08/56] ubi: Make recover_peb power cut aware, Teresa Remmet
  • [PATCH 13/56] ubi: Introduce vol_ignored(), Teresa Remmet
  • [PATCH 17/56] ubi: Be more paranoid while seaching for the most recent Fastmap, Teresa Remmet
  • [PATCH 07/56] UBI: Fix static volume checks when Fastmap is used, Teresa Remmet
  • [PATCH 15/56] ubi: Rework Fastmap attach base code, Teresa Remmet
  • [PATCH 19/56] UBI: fix add_fastmap() to use the vid_hdr passed in argument, Teresa Remmet
  • [PATCH 21/56] UBI: fastmap: scrub PEB when bitflips are detected in a free PEB EC header, Teresa Remmet
  • [PATCH 25/56] UBI: fastmap: use ubi_io_{read, write}_data() instead of ubi_io_{read, write}(), Teresa Remmet
  • [PATCH 23/56] UBI: factorize destroy_av() and ubi_remove_av() code, Teresa Remmet
  • [PATCH 27/56] UBI: move the global ech and vidh variables into struct ubi_attach_info, Teresa Remmet
  • [PATCH 35/56] ubi: Deal with interrupted erasures in WL, Teresa Remmet
  • [PATCH 31/56] UBI: provide an helper to check whether a LEB is mapped or not, Teresa Remmet
  • [PATCH 36/56] ubi: Fix races around ubi_refill_pools(), Teresa Remmet
  • [PATCH 37/56] ubi: Fix Fastmap's update_vol(), Teresa Remmet
  • [PATCH 29/56] UBI: simplify LEB write and atomic LEB change code, Teresa Remmet
  • [PATCH 33/56] UBI: hide EBA internals, Teresa Remmet
  • [PATCH 38/56] ubi: fix swapped arguments to call to ubi_alloc_aeb, Teresa Remmet
  • [PATCH 39/56] UBI: Fix crash in try_recover_peb(), Teresa Remmet
  • [PATCH 24/56] UBI: fastmap: use ubi_rb_for_each_entry() in unmap_peb(), Teresa Remmet
  • [PATCH 40/56] ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap(), Teresa Remmet
  • [PATCH 16/56] ubi: Check whether the Fastmap anchor matches the super block, Teresa Remmet
  • [PATCH 18/56] UBI: fastmap: use ubi_find_volume() instead of open coding it, Teresa Remmet
  • [PATCH 20/56] UBI: fastmap: avoid multiple be32_to_cpu() when unneccesary, Teresa Remmet
  • [PATCH 30/56] UBI: add an helper to check lnum validity, Teresa Remmet
  • [PATCH 28/56] UBI: simplify recover_peb() code, Teresa Remmet
  • [PATCH 41/56] UBI: Fix typos, Teresa Remmet
  • [PATCH 22/56] UBI: factorize code used to manipulate volumes at attach time, Teresa Remmet
  • [PATCH 26/56] UBI: provide helpers to allocate and free aeb elements, Teresa Remmet
  • [PATCH 42/56] ubi/upd: Always flush after prepared for an update, Teresa Remmet
  • [PATCH 43/56] ubi: fastmap: Fix slab corruption, Teresa Remmet
  • [PATCH 46/56] UBI: Fix two typos in comments, Teresa Remmet
  • [PATCH 44/56] ubi: pr_err() strings should end with newlines, Teresa Remmet
  • [PATCH 48/56] ubi: fastmap: Erase outdated anchor PEBs during attach, Teresa Remmet
  • [PATCH 45/56] ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate", Teresa Remmet
  • [PATCH 47/56] ubi: fastmap: Clean up the initialization of pointer p, Teresa Remmet
  • [PATCH 49/56] ubi: Fastmap: Fix typo, Teresa Remmet
  • [PATCH 54/56] ubi: fastmap: Detect EBA mismatches on-the-fly, Teresa Remmet
  • [PATCH 51/56] mtd: ubi: wl: Fix error return code in ubi_wl_init(), Teresa Remmet
  • [PATCH 53/56] ubi: fastmap: Check each mapping only once, Teresa Remmet
  • [PATCH 52/56] ubi: fastmap: Correctly handle interrupted erasures in EBA, Teresa Remmet
  • [PATCH 56/56] ubi: Initialize Fastmap checkmapping correctly, Teresa Remmet
  • [PATCH 50/56] ubi: Fix copy/paste error in function documentation, Teresa Remmet
  • [PATCH 55/56] mtd: ubi: Update ubi-media.h to dual license, Teresa Remmet
  • [PATCH 32/56] UBI: provide an helper to query LEB information, Teresa Remmet
  • [PATCH 34/56] UBI: introduce the VID buffer concept, Teresa Remmet
  • Re: [PATCH 00/56] Update Barebox UBI, Sascha Hauer
• [PATCH] drivers: net: designware: select reset controller, Steffen Trumtrar
  • Re: [PATCH] drivers: net: designware: select reset controller, Sascha Hauer
• [PATCH] gpio: pca953x: add oftree support, Oleg.Karfich
  • Re: [PATCH] gpio: pca953x: add oftree support, Sascha Hauer
• [PATCH 1/2] bbu: Look for default handler in barebox_update_handler_exists(), Andrey Smirnov
  • [PATCH 2/2] commands: barebox-update: Improve nonexistent handler reporting, Andrey Smirnov
  • Re: [PATCH 1/2] bbu: Look for default handler in barebox_update_handler_exists(), Sascha Hauer
    • Re: [PATCH 1/2] bbu: Look for default handler in barebox_update_handler_exists(), Andrey Smirnov
      • Re: [PATCH 1/2] bbu: Look for default handler in barebox_update_handler_exists(), Sascha Hauer
  • Re: [PATCH 1/2] bbu: Look for default handler in barebox_update_handler_exists(), Sascha Hauer
• [PATCH 1/2] USB: host: hub: Make sure to remove dangling pointers, Andrey Smirnov
  • [PATCH 2/2] USB: host: hub: Adjust device speed after every port reset, Andrey Smirnov
    • Re: [PATCH 2/2] USB: host: hub: Adjust device speed after every port reset, Sascha Hauer
• [PATCH v2] commands: of_property: copy value instead of resizing, Oleg.Karfich
  • Re: [PATCH v2] commands: of_property: copy value instead of resizing, Sascha Hauer
• [PATCH] arm: mach-omap: bbu_emmc: Fix return value, Teresa Remmet
  • Re: [PATCH] arm: mach-omap: bbu_emmc: Fix return value, Sascha Hauer
• [PATCH 0/5] i.MX habv4: decode error/warning events and support new CST version, Marc Kleine-Budde
  • [PATCH 3/5] i.MX habv4: habv4_get_status(): display warning events, too, Marc Kleine-Budde
  • [PATCH 4/5] i.MX habv4: habv4_display_event_record(): Add function to decode event record, Marc Kleine-Budde
  • [PATCH 1/5] i.MX habv4: properly indent defines and enums, Marc Kleine-Budde
  • [PATCH 5/5] scripts imx-image: add support for newer versions of "cst", Marc Kleine-Budde
    • Re: [PATCH 5/5] scripts imx-image: add support for newer versions of "cst", Sascha Hauer
      • Re: [PATCH 5/5] scripts imx-image: add support for newer versions of "cst", Marc Kleine-Budde
        • Re: [PATCH 5/5] scripts imx-image: add support for newer versions of "cst", Sascha Hauer
  • [PATCH 2/5] i.MX habv4: convert habv4_get_status() and habv4_display_event() from printf to pr_err(), Marc Kleine-Budde
  • Re: [PATCH 0/5] i.MX habv4: decode error/warning events and support new CST version, Sascha Hauer
• [PATCH] commands: of_property: do not free data in general, Oleg.Karfich
  • Re: [PATCH] commands: of_property: do not free data in general, Baeuerle, Florian
    • Re: [PATCH] commands: of_property: do not free data in general, Oleg.Karfich
• [PATCH 0/6] i.MX51 RDU1 and Babbage USB fixes, Andrey Smirnov
  • [PATCH 1/6] clk: i.MX: Port Linux clock tree for i.MX51 and i.MX53, Andrey Smirnov
    • Re: [PATCH 1/6] clk: i.MX: Port Linux clock tree for i.MX51 and i.MX53, Sascha Hauer
      • Re: [PATCH 1/6] clk: i.MX: Port Linux clock tree for i.MX51 and i.MX53, Andrey Smirnov
  • [PATCH 2/6] ARM: imx51-zii-rdu1: Swtich to using Linux clock tree, Andrey Smirnov
    • Re: [PATCH 2/6] ARM: imx51-zii-rdu1: Swtich to using Linux clock tree, Roland Hieber
  • [PATCH 3/6] ARM: freescale-mx51-babbage: Swtich to using Linux clock tree, Andrey Smirnov
  • [PATCH 4/6] ARM: freescale-mx51-babbage: Add USBH1 PHY reset sequence, Andrey Smirnov
  • [PATCH 5/6] dts: imx51-babbage: Add USBH1 iomux configuration, Andrey Smirnov
  • [PATCH 6/6] ARM: imx51-zii-rdu1: Add USBH1,2 iomux configuration, Andrey Smirnov
  • Re: [PATCH 0/6] i.MX51 RDU1 and Babbage USB fixes, Sascha Hauer
    • Re: [PATCH 0/6] i.MX51 RDU1 and Babbage USB fixes, Andrey Smirnov
      • Re: [PATCH 0/6] i.MX51 RDU1 and Babbage USB fixes, Sascha Hauer
• [PATCH] bootsource: handle SPI-NOR in the same way as SPI-EEPROM, Lucas Stach
  • Re: [PATCH] bootsource: handle SPI-NOR in the same way as SPI-EEPROM, Sascha Hauer
• [PATCH] imx{5,6}: reset otg port after usb-serial boot, Michael Grzeschik
  • Re: [PATCH] imx{5,6}: reset otg port after usb-serial boot, Sam Ravnborg
  • Re: [PATCH] imx{5,6}: reset otg port after usb-serial boot, Sascha Hauer
    • Re: [PATCH] imx{5,6}: reset otg port after usb-serial boot, Michael Grzeschik
      • Re: [PATCH] imx{5,6}: reset otg port after usb-serial boot, Fabio Estevam
        • Re: [PATCH] imx{5,6}: reset otg port after usb-serial boot, Michael Grzeschik
          • Re: [PATCH] imx{5,6}: reset otg port after usb-serial boot, Sascha Hauer
            • Re: [PATCH] imx{5,6}: reset otg port after usb-serial boot, Michael Grzeschik
              • Re: [PATCH] imx{5,6}: reset otg port after usb-serial boot, Michael Grzeschik
              • Re: [PATCH] imx{5,6}: reset otg port after usb-serial boot, Sascha Hauer
• [PATCH] ARM: i.MX5 clock: add clock provider support, Michael Grzeschik
  • Re: [PATCH] ARM: i.MX5 clock: add clock provider support, Andrey Smirnov
  • Re: [PATCH] ARM: i.MX5 clock: add clock provider support, Lucas Stach
    • Re: [PATCH] ARM: i.MX5 clock: add clock provider support, Sascha Hauer
• [PATCH 1/2] scripts: imx: Add support for signed HDMI firmware, Andrey Smirnov
  • [PATCH 2/2] ARM: i.MX: xload: Add support for signed HDMI firmware, Andrey Smirnov
    • Re: [PATCH 2/2] ARM: i.MX: xload: Add support for signed HDMI firmware, Sascha Hauer
      • Re: [PATCH 2/2] ARM: i.MX: xload: Add support for signed HDMI firmware, Andrey Smirnov
• [PATCH] ARM: mmu64: Don't flush freshly invalidated region, Andrey Smirnov
  • Re: [PATCH] ARM: mmu64: Don't flush freshly invalidated region, Sascha Hauer
• [PATCH 0/3] i.MX8 malloc pool position and 32-bit only DMA, Andrey Smirnov
  • [PATCH 1/3] mci: imx-esdhc: Bail out if DMA address is larger than 32-bits, Andrey Smirnov
    • Re: [PATCH 1/3] mci: imx-esdhc: Bail out if DMA address is larger than 32-bits, Sascha Hauer
      • Re: [PATCH 1/3] mci: imx-esdhc: Bail out if DMA address is larger than 32-bits, Andrey Smirnov
  • [PATCH 2/3] net: fec: Bail out if DMA address is larger than 32-bits, Andrey Smirnov
  • [PATCH 3/3] ARM: start: Place malloc pool within 32-bit address space, Andrey Smirnov
    • Re: [PATCH 3/3] ARM: start: Place malloc pool within 32-bit address space, Sascha Hauer
      • Re: [PATCH 3/3] ARM: start: Place malloc pool within 32-bit address space, Andrey Smirnov
  • Re: [PATCH 0/3] i.MX8 malloc pool position and 32-bit only DMA, Sam Ravnborg
    • Re: [PATCH 0/3] i.MX8 malloc pool position and 32-bit only DMA, Andrey Smirnov
• [PATCH 0/5] include/linux/log2.h warning fix, Andrey Smirnov
  • [PATCH 1/5] log2: make order_base_2() behave correctly on const input value zero, Andrey Smirnov
  • [PATCH 4/5] linux/log2.h: fix kernel-doc notation, Andrey Smirnov
  • [PATCH 3/5] log2: Use fls_long() in __roundup_pow_of_two(), Andrey Smirnov
  • [PATCH 2/5] give up on gcc ilog2() constant optimizations, Andrey Smirnov
  • [PATCH 5/5] scsi: ilog2: create truly constant version for sparse, Andrey Smirnov
  • Re: [PATCH 0/5] include/linux/log2.h warning fix, Sascha Hauer
• [PATCH v2 00/24] i.MX BBU improvements and bugfixes, Andrey Smirnov
  • [PATCH v2 01/24] ARM: i.MX: bbu: Remove unused define, Andrey Smirnov
  • [PATCH v2 06/24] ARM: i.MX: bbu: Drop IMX_INTERNAL_FLAG_NAND, Andrey Smirnov
  • [PATCH v2 02/24] filetype: Add arch/ to include path, Andrey Smirnov
  • [PATCH v2 03/24] filetype: Add code to detect i.MX image v1, Andrey Smirnov
  • [PATCH v2 08/24] ARM: i.MX: bbu: Simplify imx53_bbu_internal_nand_register_handler(), Andrey Smirnov
  • [PATCH v2 07/24] ARM: i.MX: bbu: Consolidate various update helpers, Andrey Smirnov
  • [PATCH v2 04/24] filetype: Add code to detect i.MX image v2, Andrey Smirnov
  • [PATCH v2 05/24] ARM: i.MX: bbu: Move inner-image type check, Andrey Smirnov
  • [PATCH v2 16/24] ARM: i.MX: zii-vf610-dev-rev-b/c: Add support for BBU on SPI-NOR, Andrey Smirnov
  • [PATCH v2 09/24] ARM: i.MX: bbu: Constify all 'devicefile' arguments, Andrey Smirnov
  • [PATCH v2 12/24] ARM: i.MX: bbu: Alias imx5*_bbu_internal_spi_i2c_register_handler(), Andrey Smirnov
  • [PATCH v2 14/24] ARM: i.MX: bbu: Adjust FLASH_HEADER_OFFSET_MMC for i.MX8MQ, Andrey Smirnov
  • [PATCH v2 19/24] libfile: Introduce pwrite_full(), Andrey Smirnov
  • [PATCH v2 13/24] ARM: i.MX: bbu: Move protect code into a separate routine, Andrey Smirnov
  • [PATCH v2 23/24] bbu: Report update failures explicitly, Andrey Smirnov
  • [PATCH v2 15/24] ARM: i.MX: bbu: Add support for SPI/I2C on VFxxx, Andrey Smirnov
  • [PATCH v2 17/24] ARM: i.MX: bbu: Add support for MMC on i.MX8MQ, Andrey Smirnov
  • [PATCH v2 21/24] bbu: Remove logical negation in barebox_update_handler_exists(), Andrey Smirnov
  • [PATCH v2 18/24] ARM: nxp-imx8mq-evk: Add eMMC BBU configuration, Andrey Smirnov
  • [PATCH v2 20/24] ARM: i.MX: bbu: Use pwrite_full() instead of pwrite(), Andrey Smirnov
  • [PATCH v2 24/24] bbu: command: Make sure specified update handler exists, Andrey Smirnov
  • [PATCH v2 22/24] block: Do not ignore error in blk->ops->write(), Andrey Smirnov
  • [PATCH v2 11/24] ARM: i.MX: bbu: Alias imx5*_bbu_internal_mmc_register_handler(), Andrey Smirnov
  • [PATCH v2 10/24] ARM: i.MX: bbu: Detect which platforms need v2 i.MX header, Andrey Smirnov
  • Re: [PATCH v2 00/24] i.MX BBU improvements and bugfixes, Sascha Hauer
• [PATCH] ARM: phytec-phycard-imx27: Add debug UART support, Florian Bäuerle
  • Re: [PATCH] ARM: phytec-phycard-imx27: Add debug UART support, Baeuerle, Florian
    • Re: [PATCH] ARM: phytec-phycard-imx27: Add debug UART support, Sascha Hauer
    • Re: [PATCH] ARM: phytec-phycard-imx27: Add debug UART support, Sascha Hauer
      • Re: [PATCH] ARM: phytec-phycard-imx27: Add debug UART support, Baeuerle, Florian
        • Re: [PATCH] ARM: phytec-phycard-imx27: Add debug UART support, s.hauer@xxxxxxxxxxxxxx
  • Re: [PATCH] ARM: phytec-phycard-imx27: Add debug UART support, Andrey Smirnov
    • Re: [PATCH] ARM: phytec-phycard-imx27: Add debug UART support, Baeuerle, Florian
      • [PATCH v2] ARM: phytec-phycard-imx27: Add debug UART support, Florian Bäuerle
• [PATCH v4 0/3] Add Davicom phy + reset-gpios, Sam Ravnborg
  • [PATCH v4 1/3] phylib: add Davicom PHY support, Sam Ravnborg
  • [PATCH v4 2/3] phylib: add support for reset-gpios, Sam Ravnborg
  • [PATCH v4 3/3] at91sam9263ek: add PHY, miitool etc. to config, Sam Ravnborg
  • Re: [PATCH v4 0/3] Add Davicom phy + reset-gpios, Sascha Hauer
• RATP i2c and GPIO support, Aleksander Morgado
  • [PATCH 1/4] ratp: implement i2c read/write support, Aleksander Morgado
    • Re: [PATCH 1/4] ratp: implement i2c read/write support, Andrey Smirnov
      • Re: [PATCH 1/4] ratp: implement i2c read/write support, Aleksander Morgado
    • Re: [PATCH 1/4] ratp: implement i2c read/write support, Sascha Hauer
      • Re: [PATCH 1/4] ratp: implement i2c read/write support, Aleksander Morgado
        • Re: [PATCH 1/4] ratp: implement i2c read/write support, Sascha Hauer
  • [PATCH 2/4] bbremote: implement i2c read/write support, Aleksander Morgado
  • [PATCH 3/4] ratp: implement support for GPIO commands, Aleksander Morgado
    • Re: [PATCH 3/4] ratp: implement support for GPIO commands, Andrey Smirnov
    • Re: [PATCH 3/4] ratp: implement support for GPIO commands, Sascha Hauer
  • [PATCH 4/4] bbremote: implement support for GPIO operations, Aleksander Morgado
• i2c master send/receive mode, Aleksander Morgado
  • [PATCH 1/2] i2c_write: document master send mode, Aleksander Morgado
  • [PATCH 2/2] i2c_read: implement support for master receive mode, Aleksander Morgado
  • Re: i2c master send/receive mode, Sascha Hauer
• [PATCH] bbremote: add missing 'md' packet handler, Aleksander Morgado
  • Re: [PATCH] bbremote: add missing 'md' packet handler, Sascha Hauer
• barebox-2018.07.2 and barebox-2018.08.1, Sascha Hauer
• [PATCH] include/common: Make use of ALIGN and ALIGN_DOWN, Andrey Smirnov
  • Re: [PATCH] include/common: Make use of ALIGN and ALIGN_DOWN, Sascha Hauer
• [PATCH] Revert "i.MX: Add provisions to boot from IRAM", Andrey Smirnov
  • Re: [PATCH] Revert "i.MX: Add provisions to boot from IRAM", Sascha Hauer
• [PATCH] ARM: cache-l2x0: Make use of IS_ALIGNED and ALIGN_DOWN, Andrey Smirnov
  • Re: [PATCH] ARM: cache-l2x0: Make use of IS_ALIGNED and ALIGN_DOWN, Sascha Hauer
• [PATCH 1/2] clk: clk-sccg-pll: Remove leftover debug output, Andrey Smirnov
  • [PATCH 2/2] clk: clk-sccg-pll: Drop prepare/unprepare for SCCG_PLL2, Andrey Smirnov
    • Re: [PATCH 2/2] clk: clk-sccg-pll: Drop prepare/unprepare for SCCG_PLL2, Sascha Hauer
      • Re: [PATCH 2/2] clk: clk-sccg-pll: Drop prepare/unprepare for SCCG_PLL2, Andrey Smirnov
        • Re: [PATCH 2/2] clk: clk-sccg-pll: Drop prepare/unprepare for SCCG_PLL2, Sascha Hauer
          • Re: [PATCH 2/2] clk: clk-sccg-pll: Drop prepare/unprepare for SCCG_PLL2, Andrey Smirnov
  • Re: [PATCH 1/2] clk: clk-sccg-pll: Remove leftover debug output, Sascha Hauer
• [PATCH] net: Do not route traffic to interfaces that are not up, Andrey Smirnov
  • Re: [PATCH] net: Do not route traffic to interfaces that are not up, Sascha Hauer
• [PATCH 00/22] i.MX BBU improvements and bugfixes, Andrey Smirnov
  • [PATCH 02/22] filetype: Add code to detect i.MX image v1, Andrey Smirnov
    • Re: [PATCH 02/22] filetype: Add code to detect i.MX image v1, Roland Hieber
      • Re: [PATCH 02/22] filetype: Add code to detect i.MX image v1, Andrey Smirnov
        • Re: [PATCH 02/22] filetype: Add code to detect i.MX image v1, Roland Hieber
          • Re: [PATCH 02/22] filetype: Add code to detect i.MX image v1, Andrey Smirnov
  • [PATCH 01/22] ARM: i.MX: bbu: Remove unused define, Andrey Smirnov
  • [PATCH 05/22] ARM: i.MX: bbu: Drop IMX_INTERNAL_FLAG_NAND, Andrey Smirnov
  • [PATCH 03/22] filetype: Add code to detect i.MX image v2, Andrey Smirnov
  • [PATCH 04/22] ARM: i.MX: bbu: Move inner-image type check, Andrey Smirnov
    • Re: [PATCH 04/22] ARM: i.MX: bbu: Move inner-image type check, Sascha Hauer
    • Re: [PATCH 04/22] ARM: i.MX: bbu: Move inner-image type check, Sascha Hauer
      • Re: [PATCH 04/22] ARM: i.MX: bbu: Move inner-image type check, Andrey Smirnov
        • Re: [PATCH 04/22] ARM: i.MX: bbu: Move inner-image type check, Sascha Hauer
  • [PATCH 07/22] ARM: i.MX: bbu: Simplify imx53_bbu_internal_nand_register_handler(), Andrey Smirnov
  • [PATCH 06/22] ARM: i.MX: bbu: Consolidate vairous update helpers, Andrey Smirnov
    • Re: [PATCH 06/22] ARM: i.MX: bbu: Consolidate vairous update helpers, Sascha Hauer
      • Re: [PATCH 06/22] ARM: i.MX: bbu: Consolidate vairous update helpers, Andrey Smirnov
  • [PATCH 09/22] ARM: i.MX: bbu: Detect which platforms need v2 i.MX header, Andrey Smirnov
  • [PATCH 16/22] ARM: i.MX: bbu: Add support for MMC on i.MX8MQ, Andrey Smirnov
  • [PATCH 08/22] ARM: i.MX: bbu: Constify all 'devicefile' arguments, Andrey Smirnov
  • [PATCH 10/22] ARM: i.MX: bbu: Alias imx5*_bbu_internal_mmc_register_handler(), Andrey Smirnov
  • [PATCH 14/22] ARM: i.MX: bbu: Add support for SPI/I2C on VFxxx, Andrey Smirnov
  • [PATCH 11/22] ARM: i.MX: bbu: Alias imx5*_bbu_internal_spi_i2c_register_handler(), Andrey Smirnov
  • [PATCH 12/22] ARM: i.MX: bbu: Move protect code into a separate routine, Andrey Smirnov
  • [PATCH 13/22] ARM: i.MX: bbu: Adjust FLASH_HEADER_OFFSET_MMC for i.MX8MQ, Andrey Smirnov
  • [PATCH 17/22] ARM: nxp-imx8mq-evk: Add eMMC BBU configuration, Andrey Smirnov
  • [PATCH 18/22] ARM: i.MX: bbu: Adjust error code check for pwrite(), Andrey Smirnov
    • Re: [PATCH 18/22] ARM: i.MX: bbu: Adjust error code check for pwrite(), Sascha Hauer
      • Re: [PATCH 18/22] ARM: i.MX: bbu: Adjust error code check for pwrite(), Andrey Smirnov
  • [PATCH 19/22] bbu: Remove logical negation in barebox_update_handler_exists(), Andrey Smirnov
    • Re: [PATCH 19/22] bbu: Remove logical negation in barebox_update_handler_exists(), Sascha Hauer
      • Re: [PATCH 19/22] bbu: Remove logical negation in barebox_update_handler_exists(), Andrey Smirnov
        • Re: [PATCH 19/22] bbu: Remove logical negation in barebox_update_handler_exists(), Sam Ravnborg
        • Re: [PATCH 19/22] bbu: Remove logical negation in barebox_update_handler_exists(), Sascha Hauer
          • Re: [PATCH 19/22] bbu: Remove logical negation in barebox_update_handler_exists(), Andrey Smirnov
  • [PATCH 22/22] bbu: command: Make sure specified update handler exists, Andrey Smirnov
  • [PATCH 21/22] bbu: Report update failures explicitly, Andrey Smirnov
  • [PATCH 15/22] ARM: i.MX: zii-vf610-dev-rev-b/c: Add support for BBU on SPI-NOR, Andrey Smirnov
  • [PATCH 20/22] block: Do not ignore error in blk->ops->write(), Andrey Smirnov
• [PATCH v3 0/3] Add Davicom phy + reset-gpios, Sam Ravnborg
  • [PATCH v3 1/3] phylib: add Davicom PHY support, Sam Ravnborg
  • [PATCH v3 2/3] phylib: add support for reset-gpios, Sam Ravnborg
    • Re: [PATCH v3 2/3] phylib: add support for reset-gpios, Sascha Hauer
      • Re: [PATCH v3 2/3] phylib: add support for reset-gpios, Sam Ravnborg
        • Re: [PATCH v3 2/3] phylib: add support for reset-gpios, Ahmad Fatoum
          • Re: [PATCH v3 2/3] phylib: add support for reset-gpios, Sam Ravnborg
  • [PATCH v3 3/3] at91sam9263ek: add PHY, miitool etc. to config, Sam Ravnborg
• [PATCH 1/3] ARM: dts: am335x: introduce new "stripped" common.dtsi for PBL use, marc
  • [PATCH 2/3] ARM: dts: update am335x-bone-common.dtsi to match kernel version, marc
  • [PATCH 3/3] ARM: dts: change am335x-bone-common.dtsi to include kernel variant directly, marc
  • Re: [PATCH 1/3] ARM: dts: am335x: introduce new "stripped" common.dtsi for PBL use, Roland Hieber
    • Re: [PATCH 1/3] ARM: dts: am335x: introduce new "stripped" common.dtsi for PBL use, Marc Reilly
  • Re: [PATCH 1/3] ARM: dts: am335x: introduce new "stripped" common.dtsi for PBL use, Sascha Hauer
• [PATCH] ARM: i.MX: Disable OTG controller during startup, Sascha Hauer
  • Re: [PATCH] ARM: i.MX: Disable OTG controller during startup, Sascha Hauer
• [PATCH] ARM: MMU: fix wrong dma_flush_range in arm_create_pte(), Sascha Hauer
  • Re: [PATCH] ARM: MMU: fix wrong dma_flush_range in arm_create_pte(), Sascha Hauer
    • Re: [PATCH] ARM: MMU: fix wrong dma_flush_range in arm_create_pte(), Andrey Smirnov
      • Re: [PATCH] ARM: MMU: fix wrong dma_flush_range in arm_create_pte(), Sascha Hauer
      • Re: [PATCH] ARM: MMU: fix wrong dma_flush_range in arm_create_pte(), Giorgio Dal Molin
• ARM: dts: udpates for am335x-bone-common, marc
  • [PATCH 1/3] ARM: dts: am335x: introduce new "stripped" common.dtsi for PBL use, marc
  • [PATCH 2/3] ARM: dts: update am335x-bone-common.dtsi to match kernel version, marc
  • [PATCH 3/3] ARM: dts: change am335x-bone-common.dtsi to include kernel variant directly, marc
    • Re: [PATCH 3/3] ARM: dts: change am335x-bone-common.dtsi to include kernel variant directly, Sascha Hauer
• [PATCH] nand command: fix null pointer when adding/deleting a bb device, Oleg.Karfich
  • Re: [PATCH] nand command: fix null pointer when adding/deleting a bb device, Sascha Hauer
• [PATCH v3 00/14] MXS low-level improvements, Roland Hieber
  • [PATCH v3 03/14] ARM: MXS: i.MX28: allow setup of low-voltage SDRAM, Roland Hieber
  • [PATCH v3 02/14] images: MXS: allow generation of unencrypted bootstreams, Roland Hieber
  • [PATCH v3 08/14] ARM: MXS: allow starting from battery input without 4P2 source enabled, Roland Hieber
  • [PATCH v3 04/14] ARM: MXS: allow configuration of EMI clock prescaler, Roland Hieber
  • [PATCH v3 01/14] scripts: mxsimage: Allow unencrypted images, Roland Hieber
  • [PATCH v3 06/14] ARM: i.MX23: Add memory size detection, Roland Hieber
  • [PATCH v3 07/14] ARM: MXS: refactor mx2*_power_init source configuration, Roland Hieber
  • [PATCH v3 05/14] ARM: i.MX28: Add memory size detection, Roland Hieber
  • [PATCH v3 11/14] ARM: MXS: make VDDx brownout setup more understandable, Roland Hieber
  • [PATCH v3 10/14] ARM: MXS: fix VDDx brownout setup logic, Roland Hieber
  • [PATCH v3 12/14] ARM: MXS: mxs_power_status: use less magic values, Roland Hieber
  • [PATCH v3 09/14] ARM: MXS: make power levels configurable in mx2*_power_init, Roland Hieber
  • [PATCH v3 13/14] ARM: MXS: mxs_power_status: align output, Roland Hieber
  • [PATCH v3 14/14] Documentation: MXS: general update and improvements, Roland Hieber
  • Re: [PATCH v3 00/14] MXS low-level improvements, Sascha Hauer
• v2018.08.0, Sascha Hauer
• [PATCH 0/6] i.MX8MQ boot source, reset reason, etc., Andrey Smirnov
  • [PATCH 1/6] ARM: i.MX8M: Expose code to query cpu revision, Andrey Smirnov
  • [PATCH 5/6] ARM: i.MX8MQ: Add code to detect reset reason, Andrey Smirnov
  • [PATCH 2/6] ARM: i.MX: boot: Fix accidental comma, Andrey Smirnov
  • [PATCH 3/6] ARM: i.MX: boot: Rework boot source detection for i.MX7 and i.MX8MQ, Andrey Smirnov
    • Re: [PATCH 3/6] ARM: i.MX: boot: Rework boot source detection for i.MX7 and i.MX8MQ, Sascha Hauer
      • Re: [PATCH 3/6] ARM: i.MX: boot: Rework boot source detection for i.MX7 and i.MX8MQ, Andrey Smirnov
  • [PATCH 4/6] ARM: i.MX8MQ: Replace magic numbers with named constants, Andrey Smirnov
  • [PATCH 6/6] ARM: i.MX8MQ: Save boot location during initialization, Andrey Smirnov
  • Re: [PATCH 0/6] i.MX8MQ boot source, reset reason, etc., Sascha Hauer
• [PATCH] pinctrl: i.MX: Add code to parse "input-enable", Andrey Smirnov
  • Re: [PATCH] pinctrl: i.MX: Add code to parse "input-enable", Sascha Hauer
• [PATCH] i.MX: Select DRIVER_SPI_IMX_2_3 for i.MX8MQ, Andrey Smirnov
  • Re: [PATCH] i.MX: Select DRIVER_SPI_IMX_2_3 for i.MX8MQ, Sascha Hauer
• [PATCH] i.MX: i2c: Fix build error in debug output code, Andrey Smirnov
  • Re: [PATCH] i.MX: i2c: Fix build error in debug output code, Sascha Hauer
• [PATCH] ARM: lib64: Properly handle unaligned addresses in string functions, Andrey Smirnov
  • Re: [PATCH] ARM: lib64: Properly handle unaligned addresses in string functions, Sascha Hauer
    • Re: [PATCH] ARM: lib64: Properly handle unaligned addresses in string functions, Andrey Smirnov
• [PATCH] ARM: i.MX: freescale-mx6sx-sabresdb: Make ar8031_phy_fixup static, Andrey Smirnov
  • Re: [PATCH] ARM: i.MX: freescale-mx6sx-sabresdb: Make ar8031_phy_fixup static, Sascha Hauer
    • Re: [PATCH] ARM: i.MX: freescale-mx6sx-sabresdb: Make ar8031_phy_fixup static, Robert Schwebel
      • Re: [PATCH] ARM: i.MX: freescale-mx6sx-sabresdb: Make ar8031_phy_fixup static, Andrey Smirnov
        • Re: [PATCH] ARM: i.MX: freescale-mx6sx-sabresdb: Make ar8031_phy_fixup static, Sascha Hauer
• [PATCH v2 00/14] MXS low-level improvements, Roland Hieber
  • [PATCH v2 06/14] ARM: i.MX23: Add memory size detection, Roland Hieber
    • Re: [PATCH v2 06/14] ARM: i.MX23: Add memory size detection, Andrey Smirnov
  • [PATCH v2 02/14] images: MXS: allow generation of unencrypted bootstreams, Roland Hieber
  • [PATCH v2 08/14] ARM: MXS: allow starting from battery input without 4P2 source enabled, Roland Hieber
  • [PATCH v2 09/14] ARM: MXS: make power levels configurable in mx2*_power_init, Roland Hieber
  • [PATCH v2 12/14] ARM: MXS: mxs_power_status: use less magic values, Roland Hieber
  • [PATCH v2 05/14] ARM: i.MX28: Add memory size detection, Roland Hieber
  • [PATCH v2 01/14] scripts: mxsimage: Allow unencrypted images, Roland Hieber
  • [PATCH v2 11/14] ARM: MXS: make VDDx brownout setup more understandable, Roland Hieber
  • [PATCH v2 13/14] ARM: MXS: mxs_power_status: align output, Roland Hieber
  • [PATCH v2 07/14] ARM: MXS: refactor mx2*_power_init source configuration, Roland Hieber
    • Re: [PATCH v2 07/14] ARM: MXS: refactor mx2*_power_init source configuration, Andrey Smirnov
      • Re: [PATCH v2 07/14] ARM: MXS: refactor mx2*_power_init source configuration, Roland Hieber
  • [PATCH v2 03/14] ARM: MXS: i.MX28: allow setup of low-voltage SDRAM, Roland Hieber
  • [PATCH v2 10/14] ARM: MXS: fix VDDx brownout setup logic, Roland Hieber
  • [PATCH v2 04/14] ARM: MXS: allow configuration of EMI clock prescaler, Roland Hieber
  • [PATCH v2 14/14] Documentation: MXS: general update and improvements, Roland Hieber
• [PATCH v2] HAB: fuse recommended OCOTP_DIR_BT_DIS, Bastian Stender
• [PATCH 1/2] ARM: imx: add fusemap entries for i.MX6SDL silicon revision >=1.4, Bastian Stender
  • [PATCH 2/2] HAB: fuse recommended OCOTP_DIR_BT_DIS, Bastian Stender
  • Re: [PATCH 1/2] ARM: imx: add fusemap entries for i.MX6SDL silicon revision >=1.4, Sascha Hauer
• [PATCH] fs: ramfs: get chunks zero initialized, Sascha Hauer
• [PATCH 1/2] ARM: VFxxx: zii-vf610-dev: Add newline before error banner, Andrey Smirnov
  • [PATCH 2/2] ARM: VFxxx: zii-vf610-dev: Make get_sytem_type() static, Andrey Smirnov
  • Re: [PATCH 1/2] ARM: VFxxx: zii-vf610-dev: Add newline before error banner, Sascha Hauer
• [PATCH] net: eth: Make use of ETH_ALEN, Andrey Smirnov
  • Re: [PATCH] net: eth: Make use of ETH_ALEN, Sascha Hauer
• [PATCH] FIT: be more verbose when RSA signature check fails, Roland Hieber
  • [PATCH v2] FIT: be more verbose when RSA signature check fails, Roland Hieber
    • Re: [PATCH v2] FIT: be more verbose when RSA signature check fails, Sascha Hauer
• NFS boot - could not open /.tftp_tmp_path, Sam Ravnborg
  • Re: NFS boot - could not open /.tftp_tmp_path, Ulrich Ölmann
    • Re: NFS boot - could not open /.tftp_tmp_path, Sam Ravnborg
      • Re: NFS boot - could not open /.tftp_tmp_path, Ulrich Ölmann
        • Re: NFS boot - could not open /.tftp_tmp_path, Sam Ravnborg
          • Re: NFS boot - could not open /.tftp_tmp_path, Sascha Hauer
• [PATCH 1/3] libfile: open_and_lseek: don't imply O_RDONLY, Uwe Kleine-König
  • [PATCH 2/3] libfile: open_and_lseek: enlarge small files enough to make lseek possible, Uwe Kleine-König
    • Re: [PATCH 2/3] libfile: open_and_lseek: enlarge small files enough to make lseek possible, Sascha Hauer
      • Re: [PATCH 2/3] libfile: open_and_lseek: enlarge small files enough to make lseek possible, Uwe Kleine-König
  • [PATCH 3/3] commands: teach commands that write to files to also create them, Uwe Kleine-König
• [PATCH] scripts/dtc: Reenable fdtget, Sascha Hauer
  • Re: [PATCH] scripts/dtc: Reenable fdtget, Juergen Borleis
    • Re: [PATCH] scripts/dtc: Reenable fdtget, Sascha Hauer
      • Re: [PATCH] scripts/dtc: Reenable fdtget, Juergen Borleis
        • Re: [PATCH] scripts/dtc: Reenable fdtget, Sascha Hauer
  • [PATCH] scripts/dtc: add fdtget to .gitignore, Peter Mamonov
    • Re: [PATCH] scripts/dtc: add fdtget to .gitignore, Sascha Hauer
• [PATCH v2 0/3] Add Davicom phy + reset-gpios, Sam Ravnborg
  • [PATCH v2 1/3] phylib: add Davicom PHY support, Sam Ravnborg
  • [PATCH v2 2/3] phylib: add support for reset-gpios, Sam Ravnborg
    • Re: [PATCH v2 2/3] phylib: add support for reset-gpios, Sascha Hauer
      • Re: [PATCH v2 2/3] phylib: add support for reset-gpios, Sam Ravnborg
  • [PATCH v2 3/3] at91sam9263ek: add PHY, miitool etc. to config, Sam Ravnborg
• scripts/dtc/fdtget: No such file or directory, Peter Mamonov
  • Re: scripts/dtc/fdtget: No such file or directory, Oleksij Rempel
  • Re: scripts/dtc/fdtget: No such file or directory, Sascha Hauer
• [PATCH v1 0/2] Add Davicom phy + reset-gpios, Sam Ravnborg
  • [PATCH v1 1/2] phylib: add Davicom support, Sam Ravnborg
  • [PATCH v1 2/2] phylib: add support for reset-gpios, Sam Ravnborg
    • Re: [PATCH v1 2/2] phylib: add support for reset-gpios, Sam Ravnborg
• [PATCH] ARM: Mark SP as being clobbered in arm_setup_stack(), Andrey Smirnov
  • Re: [PATCH] ARM: Mark SP as being clobbered in arm_setup_stack(), Sascha Hauer
• [PATCH] ARM: phytec-som-am335x: make autoenable actually usable, Uwe Kleine-König
  • Re: [PATCH] ARM: phytec-som-am335x: make autoenable actually usable, Sascha Hauer
• [PATCH] usb: gadget: allow to actually enable sparse fastboot support, Uwe Kleine-König
  • [PATCH v2] usb: gadget: allow to actually enable sparse fastboot support, Uwe Kleine-König
    • Re: [PATCH v2] usb: gadget: allow to actually enable sparse fastboot support, Schenk, Gavin
    • Re: [PATCH v2] usb: gadget: allow to actually enable sparse fastboot support, Sascha Hauer
• [PATCH] mci: s3c: fix providing info callback, Uwe Kleine-König
  • Re: [PATCH] mci: s3c: fix providing info callback, Sascha Hauer
• [PATCH] of_node: clearify help text and do stricter commandline parsing, Uwe Kleine-König
  • Re: [PATCH] of_node: clearify help text and do stricter commandline parsing, Sascha Hauer
• [PATCH] aiodev: Fix whitespaces in Kconfig, Sascha Hauer
• PATCH added tftp port to fsoptions, Toews, Dietrich
  • Re: PATCH added tftp port to fsoptions, Oleksij Rempel
    • RE: PATCH added tftp port to fsoptions, Toews, Dietrich
      • Re: PATCH added tftp port to fsoptions, Uwe Kleine-König
  • Re: PATCH added tftp port to fsoptions, Sascha Hauer
• Help requested with Barebox on Globalscale Mirabox, Leigh Brown
  • Re: Help requested with Barebox on Globalscale Mirabox, Uwe Kleine-König
    • Re: Help requested with Barebox on Globalscale Mirabox, Leigh Brown
      • Re: Help requested with Barebox on Globalscale Mirabox, Uwe Kleine-König
• root= kernel cmdline parameter, Giorgio Dal Molin
  • Re: root= kernel cmdline parameter, Uwe Kleine-König
    • Re: root= kernel cmdline parameter, Giorgio Dal Molin
      • Re: root= kernel cmdline parameter, Uwe Kleine-König
  • Re: root= kernel cmdline parameter, Sascha Hauer
    • Re: root= kernel cmdline parameter, Giorgio Dal Molin
      • Re: root= kernel cmdline parameter, Giorgio Dal Molin
• [PATCH 00/19] ARM: SoCFPGA: Arria10: Early FPGA config, Steffen Trumtrar
  • [PATCH 06/19] ARM: socfpga: arria10: move debug_ll to common code, Steffen Trumtrar
  • [PATCH 05/19] reset: socfpga: add missing driver name, Steffen Trumtrar
  • [PATCH 19/19] ARM: socfpga: achilles: move environment to raw partition, Steffen Trumtrar
  • [PATCH 07/19] ARM: socfpga: arria10: add ocram base address, Steffen Trumtrar
  • [PATCH 17/19] ARM: socfpga: achilles: convert to PBL barebox, Steffen Trumtrar
  • [PATCH 10/19] ARM: socfpga: arria10: set default TEXTBASE, Steffen Trumtrar
  • [PATCH 02/19] mci: dw_mmc: convert to BIT() macro, Steffen Trumtrar
  • [PATCH 04/19] bootm: allow booting SoCFPGA prebootloader image, Steffen Trumtrar
  • [PATCH 01/19] mci: dw_mmc: remove device_d pointer, Steffen Trumtrar
  • [PATCH 08/19] ARM: socfpga: add SMP_TWD_ADDR for Arria10, Steffen Trumtrar
  • [PATCH 09/19] ARM: socfpga: arria10-init: split pinsetup, Steffen Trumtrar
  • [PATCH 03/19] mci: dw: move defines to headerfile, Steffen Trumtrar
  • [PATCH 11/19] ARM: socfpga: arria10: fix SDMMC phase shift, Steffen Trumtrar
  • [PATCH 18/19] ARM: arria10: update defconfig, Steffen Trumtrar
  • [PATCH 13/19] ARM: dts: socfpga: Fix achilles dtc warnings, Steffen Trumtrar
  • [PATCH 12/19] ARM: socfpga: achilles: update handoff files, Steffen Trumtrar
  • [PATCH 15/19] ARM: socfpga: arria10-reset-manager: don't reset bootsource, Steffen Trumtrar
  • [PATCH 14/19] scripts: socfpga_mkimage: add size feature for PBL barebox, Steffen Trumtrar
  • [PATCH 16/19] ARM: socfpga: Arria10: support programming FPGA in PBL, Steffen Trumtrar
  • Re: [PATCH 00/19] ARM: SoCFPGA: Arria10: Early FPGA config, Sascha Hauer
• [PATCH 1/4] ARM: i.MX: HAB: fix missing include for EPERM, Roland Hieber
  • [PATCH 3/4] gpio: fix missing includes for bool and struct list_head, Roland Hieber
  • [PATCH 2/4] ARM: i.MX: OCOTP: fix missing include for uint32_t etc., Roland Hieber
  • [PATCH 4/4] linux/types.h: fix missing include for BITS_TO_LONGS(), Roland Hieber
    • Re: [PATCH 4/4] linux/types.h: fix missing include for BITS_TO_LONGS(), Sascha Hauer
      • Re: [PATCH 4/4] linux/types.h: fix missing include for BITS_TO_LONGS(), Roland Hieber
  • Re: [PATCH 1/4] ARM: i.MX: HAB: fix missing include for EPERM, Sascha Hauer
• [PATCH] ARM: i.MX: HAB: fix missing include, Roland Hieber
  • Re: [PATCH] ARM: i.MX: HAB: fix missing include, Roland Hieber
• stable release v2018.07.1, Lucas Stach
• [PATCH] arm: dts: am335x-bone-common.dtsi: add eeprom device to DT, marc
  • Re: [PATCH] arm: dts: am335x-bone-common.dtsi: add eeprom device to DT, Sascha Hauer
• [PATCH] reset: socfpga: add missing driver name, Steffen Trumtrar
  • Re: [PATCH] reset: socfpga: add missing driver name, Sascha Hauer
• kernel ubi boot, Dimitri Van Dyck | IndigoCare
  • Re: kernel ubi boot, Ian Abbott
  • Re: kernel ubi boot, Sascha Hauer
• optee in barebox, siva
  • Re: optee in barebox, Sascha Hauer
• [PATCH] ARM: mmu: fix cache flushing when replacing a section with a PTE, Lucas Stach
  • <Possible follow-ups>
  • [PATCH] ARM: mmu: fix cache flushing when replacing a section with a PTE, Lucas Stach
    • [PATCH 3/3] ARM: imx6: gw54xx: add fixup for PCIe switch, Lucas Stach
    • [PATCH 1/3] PCI: link PCI devices with potentially existing OF nodes, Lucas Stach
      • Re: [PATCH 1/3] PCI: link PCI devices with potentially existing OF nodes, Sascha Hauer
    • [PATCH 2/3] pci: add quirk infrastructure, Lucas Stach
    • Re: [PATCH] ARM: mmu: fix cache flushing when replacing a section with a PTE, Lucas Stach
• [PATCH 1/2] Documentation: don't highlight literal blocks as shell script, Roland Hieber
  • [PATCH 2/2] Documentation: fix code block and literal block highlighting, Roland Hieber
    • Re: [PATCH 2/2] Documentation: fix code block and literal block highlighting, Sascha Hauer
      • Re: [PATCH 2/2] Documentation: fix code block and literal block highlighting, Roland Hieber
    • [PATCH v2 2/2] Documentation: fix code block and literal block highlighting, Roland Hieber
      • Re: [PATCH v2 2/2] Documentation: fix code block and literal block highlighting, Sascha Hauer
• [PATCH 00/13] MXS/MX28 low-level improvements, Roland Hieber
  • [PATCH 10/13] ARM: MXS: make VDDx brownout setup more understandable, Roland Hieber
  • [PATCH 01/13] scripts: mxsimage: Allow unencrypted images, Roland Hieber
  • [PATCH 02/13] images: MXS: allow generation of unencrypted bootstreams, Roland Hieber
  • [PATCH 08/13] ARM: MXS: make power levels configurable in mx2*_power_init, Roland Hieber
  • [PATCH 04/13] ARM: MXS: allow configuration of EMI clock dividers, Roland Hieber
    • Re: [PATCH 04/13] ARM: MXS: allow configuration of EMI clock dividers, Sascha Hauer
  • [PATCH 03/13] ARM: MXS: i.MX28: allow setup of low-voltage SDRAM, Roland Hieber
  • [PATCH 13/13] Documentation: MXS: general update and improvements, Roland Hieber
  • [PATCH 11/13] ARM: MXS: mxs_power_status: use less magic values, Roland Hieber
  • [PATCH 09/13] ARM: MXS: fix VDDx brownout setup logic, Roland Hieber
  • [PATCH 07/13] ARM: MXS: allow starting from battery input without 4P2 source enabled, Roland Hieber
  • [PATCH 12/13] ARM: MXS: mxs_power_status: align output, Roland Hieber
  • [PATCH 05/13] ARM: MXS: i.MX28: add autodetection of memory banks, Roland Hieber
    • Re: [PATCH 05/13] ARM: MXS: i.MX28: add autodetection of memory banks, Roland Hieber
    • Re: [PATCH 05/13] ARM: MXS: i.MX28: add autodetection of memory banks, Roland Hieber
      • Re: [PATCH 05/13] ARM: MXS: i.MX28: add autodetection of memory banks, Sascha Hauer
  • [PATCH 06/13] ARM: MXS: refactor mx2*_power_init source configuration, Roland Hieber
• [PATCH] mci: imx-esdhc: send required clock pulses to card on init, Lucas Stach
  • Re: [PATCH] mci: imx-esdhc: send required clock pulses to card on init, Sascha Hauer
• Problem booting Linux v4.8.15 from NAND on using Barebox, Сапожников Игорь Валерьевич
  • Re: Problem booting Linux v4.8.15 from NAND on using Barebox, Andrey Smirnov
• [PATCH v2 00/12] ARM: i.MX8MQ and EVK support, part II, Andrey Smirnov
  • [PATCH v2 01/12] ARM: nxp-imx8mq-evk: Update DDR initialization code, Andrey Smirnov
  • [PATCH v2 03/12] ARM: i.MX8MQ: Configure cntfrq only in EL3, Andrey Smirnov
  • [PATCH v2 07/12] ARM: i.MX: xload-esdhc: Make use of <mach/imx-header.h>, Andrey Smirnov
  • [PATCH v2 04/12] ARM: i.MX8MQ: Add code to load BL31 ATF blob, Andrey Smirnov
  • [PATCH v2 02/12] ARM: Add code to support SMCCC on AArch64, Andrey Smirnov
  • [PATCH v2 06/12] ARM: i.MX: Move i.MX header definitions to mach-imx, Andrey Smirnov
  • [PATCH v2 08/12] ARM: i.MX: xload-esdhc: Allow placing image to align its etnry point, Andrey Smirnov
  • [PATCH v2 09/12] ARM: nxp-imx8mq-evk: Add code to load ATF BL31 blob, Andrey Smirnov
  • [PATCH v2 10/12] ARM: i.MX8MQ: Query and display ATF fimware hash if availible, Andrey Smirnov
  • [PATCH v2 12/12] firmware: Fix copy-paste comment mistake, Andrey Smirnov
  • [PATCH v2 05/12] ARM: i.MX: fimware: Add pre-built BL31 ATF blob, Andrey Smirnov
  • [PATCH v2 11/12] ARM: nxp-imx8mq-evk: Add bootflow comments, Andrey Smirnov
  • Re: [PATCH v2 00/12] ARM: i.MX8MQ and EVK support, part II, Sascha Hauer
• [PATCH] Documentation: imx8mq-evk: Fix typo, Fabio Estevam
  • Re: [PATCH] Documentation: imx8mq-evk: Fix typo, Sascha Hauer
• Cannot set GPIOs in barebox, Mihaita Ivascu
  • Re: Cannot set GPIOs in barebox, Mihaita Ivascu
    • Re: Cannot set GPIOs in barebox, Aleksander Morgado
      • Re: Cannot set GPIOs in barebox, Andrey Smirnov
        • Re: Cannot set GPIOs in barebox, Mihaita Ivascu
• qemu and barebox, Giuseppe Levi
  • Re: qemu and barebox, Roland Hieber
  • Re: qemu and barebox, Alessandro Rubini
    • Re: qemu and barebox, Giuseppe Levi
      • Re: qemu and barebox, Andrey Smirnov
      • Re: qemu and barebox, Alessandro Rubini
• MFGTools support in barebox, Mihaita Ivascu
  • Re: MFGTools support in barebox, Uwe Kleine-König
    • Re: MFGTools support in barebox, Mihaita Ivascu
      • Re: MFGTools support in barebox, Oleksij Rempel
        • Re: MFGTools support in barebox, Mihaita Ivascu
          • Re: MFGTools support in barebox, Mihaita Ivascu
            • Re: MFGTools support in barebox, Oleksij Rempel
              • Re: MFGTools support in barebox, Mihaita Ivascu
                • Re: MFGTools support in barebox, Oleksij Rempel
                  • Message not available
                    • Re: MFGTools support in barebox, Oleksij Rempel
  • <Possible follow-ups>
  • MFGtools support in barebox, Mihaita Ivascu
    • Re: MFGtools support in barebox, Oleksij Rempel