On Tue, Jun 26, 2012 at 2:06 PM, Jan Lübbe <jlu@xxxxxxxxxxxxxx> wrote: > On Tue, 2012-06-26 at 13:59 +0200, Yegor Yefremov wrote: >> > this series introduces a new ARM machine 'davinci' and adds support >> > for UART, pin mux, power/clock, USB 1.1, NAND and SPI. Included is >> > support for the HMI10 system which was used to develop and test this >> > series. >> > >> > A second series adding ethernet (EMAC) and display (LCDC) support >> > will be submitted when this is accepted. >> >> do you also have am335x system? AFAIK they both share same IP blocks. > > I have a BeagleBone, which uses an AM3359. So far it seems that it is > closer to the OMAP3530 (beagleboard) than to the L138. The AM3505 shares > the EMAC core with the L138 and the AM1808 should be nearly identical to > the L138. > > I've got a simple hack which allows loading barebox on a BeagleBone from > U-Boot's SPL (MUX and clocking is missing). You can use it to load a > kernel from SD and boot it. Could you share the hack? I would really like to see at least one of our systems using barebox instead of u-boot. Yegor _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
