Linux USB Users

• Thread Index

• [RFC 1/2] usb: gadget: f_hid: Extend functionality for GET_REPORT mode
  • From: Suniel Mahesh <sunil@xxxxxxxxxxxxxxxxxxxx>
• [RFC 2/2] HID: ghid: add example program for GET_REPORT
  • From: Suniel Mahesh <sunil@xxxxxxxxxxxxxxxxxxxx>
• [RFC 0/2] Extend functionality for GET_REPORT
  • From: Suniel Mahesh <sunil@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: verdin-imx8mm: add otg2 pd to usbphy
  • From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
• Re: [PATCH v2 RESEND] thunderbolt: Add DP out resource when DP tunnel is discovered.
  • From: Sanjay R Mehta <sanmehta@xxxxxxx>
• [PATCH v3 7/7] usb: typec: tcpci_rt1711h: Fix CC PHY noise filter of voltage level
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v3 6/7] usb: typec: tcpci: Move function "tcpci_to_typec_cc" to common
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v3 5/7] usb: typec: tcpci_rt1711h: Add compatible id with rt1715
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v3 4/7] usb: typec: tcpci_rt1711h: Add initial phy setting
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v3 3/7] usb: typec: tcpci_rt1711h: Add regulator support when source vbus
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v3 1/7] dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v3 2/7] usb: typec: tcpci_rt1711h: Fix vendor setting when set vconn
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v3 0/7] usb: typec: tcpci_rt1711h: Add compatible with rt1715
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• Re: [PATCH v2] thunderbolt: fix PCI device class after powering up
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 RESEND] thunderbolt: Add DP out resource when DP tunnel is discovered.
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v5] watchdog: add driver for StreamLabs USB watchdog device
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: szuni chen <szunichen@xxxxxxxxx>
• [PATCH v2] usb: dwc3: qcom: Provide stubs for dwc3_qcom_read_usb2_speed function
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v6 05/13] dt-bindings: backlight: Add MediaTek MT6370 backlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v5] watchdog: add driver for StreamLabs USB watchdog device
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• Re: [PATCH v5] watchdog: add driver for StreamLabs USB watchdog device
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• Re: [PATCH v5] watchdog: add driver for StreamLabs USB watchdog device
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• [for-next][PATCH 01/21] USB: mtu3: tracing: Use the new __vstring() helper
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH v5] watchdog: add driver for StreamLabs USB watchdog device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5] watchdog: add driver for StreamLabs USB watchdog device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: gadget: f_hid: Add Set-Feature report
  • From: Maxim Devaev <mdevaev@xxxxxxxxx>
• [PATCH v4] net: usb: ax88179_178a: Bind only to vendor-specific interface
  • From: Hector Martin <marcan@xxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Provide stubs for dwc3_qcom_read_usb2_speed function
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Provide stubs for dwc3_qcom_read_usb2_speed function
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH] usb: dwc3: qcom: Provide stubs for dwc3_qcom_read_usb2_speed function
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v5] watchdog: add driver for StreamLabs USB watchdog device
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v6 04/13] dt-bindings: leds: Add MediaTek MT6370 flashlight
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/2] extcon: usbc-tusb320: Add USB TYPE-C support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] extcon: usbc-tusb320: Add USB TYPE-C support
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 2/2] extcon: usbc-tusb320: Add USB TYPE-C support
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH 1/2] extcon: usbc-tusb320: Factor out extcon into dedicated functions
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [syzbot] KASAN: null-ptr-deref Read in ida_free (2)
  • From: Siddh Raman Pant <code@xxxxxxxx>
• Re: [syzbot] INFO: rcu detected stall in hub_event
  • From: syzbot <syzbot+ec5f884c4a135aa0dbb9@xxxxxxxxxxxxxxxxxxxxxxxxx>
• 回复: [PATCH] USB: serial: option: add Quectel EM060K modem
  • From: 谭 永林 <yonglin.tan@xxxxxxxxxxx>
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH 1/2] USB: gadget: f_hid: Add Get-Feature report
  • From: Vicki Pfau <vi@xxxxxxxxxxx>
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2] thunderbolt: fix PCI device class after powering up
  • From: Łukasz Bartosik <lb@xxxxxxxxxxxx>
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v1] thunderbolt: fix PCI device class after powering up
  • From: Łukasz Bartosik <lb@xxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: gadget: f_hid: Add Get-Feature report
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] thunderbolt: fix PCI device class after powering up
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: typec: intel_pmc_mux: Add new ACPI ID for Meteor Lake IOM device
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: usb-serial-simple: add new device id for OPPO R11
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: szuni chen <szunichen@xxxxxxxxx>
• Re: [PATCH] USB: usb-serial-simple: add new device id for OPPO R11
  • From: sdlyyxy <sdlyyxy@xxxxxxxxxxx>
• Re: [PATCH net-next] net: usb: delete extra space and tab in blank line
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [usb:usb-testing] BUILD SUCCESS 8288c99fc263bcafc5df5fa8c278b2eb8106364e
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] usb: typec: intel_pmc_mux: Add new ACPI ID for Meteor Lake IOM device
  • From: Utkarsh Patel <utkarsh.h.patel@xxxxxxxxx>
• [Bug 214259] Discrete Thunderbold Controller 8086:1137 throws DMAR and XHCI errors and is only partially functional
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH 2/2] USB: gadget: f_hid: Add Set-Feature report
  • From: Vicki Pfau <vi@xxxxxxxxxxx>
• Re: [PATCH 1/2] USB: gadget: f_hid: Add Get-Feature report
  • From: Vicki Pfau <vi@xxxxxxxxxxx>
• Re: [PATCH v1] thunderbolt: fix PCI device class after powering up
  • From: Łukasz Bartosik <lb@xxxxxxxxxxxx>
• Re: [PATCH v1] thunderbolt: fix PCI device class after powering up
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [Bug 214259] Discrete Thunderbold Controller 8086:1137 throws DMAR and XHCI errors and is only partially functional
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v1] thunderbolt: fix PCI device class after powering up
  • From: Łukasz Bartosik <lb@xxxxxxxxxxxx>
• [PATCH v2] usb: cdns3: change place of NULL check in cdns3_gadget_ep_enable()
  • From: Andrey Strachuk <strochuk@xxxxxxxxx>
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH 1/1] usb: misc: onboard_usb_hub: Remove duplicated power_on delay
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v4 1/2] usb: misc: onboard_usb_hub: Add reset-gpio support
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v1] thunderbolt: fix PCI device class after powering up
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v1] thunderbolt: fix PCI device class after powering up
  • From: Lukasz Bartosik <lb@xxxxxxxxxxxx>
• RE: 答复: [vger.kernel.org代发]Re: [PATCH v2] usb: musb: Fix musb_gadget.c rxstate may cause request->buf overflow problems
  • From: Andy Guo (郭卫斌) <guoweibin@xxxxxxxxxx>
• Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• RE: handling MAC set by user space in reset_resume() of r8152
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• Re: [PATCH 2/2] USB: gadget: f_hid: Add Set-Feature report
  • From: Maxim Devaev <mdevaev@xxxxxxxxx>
• Re: [PATCH] xhci: tegra: USB2 pad power controls
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: handling MAC set by user space in reset_resume() of r8152
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• RE: handling MAC set by user space in reset_resume() of r8152
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• Re: [PATCH 1/2] USB: gadget: f_hid: Add Get-Feature report
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: typec: anx7411: Fix error code in anx7411_register_partner()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: typec: anx7411: Fix error code in anx7411_register_partner()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: 答复: [vger.kernel.org代发]Re: [PATCH v2] usb: musb: Fix musb_gadget.c rxstate may cause request->buf overflow problems
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] usb: misc: onboard_usb_hub: Remove duplicated power_on delay
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] usb: misc: onboard_usb_hub: Add reset-gpio support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] usb: misc: onboard_usb_hub: Add reset-gpio support
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• [PATCH v3] usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH] usb: common: debug: Check non-standard control requests
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• 答复: [vger.kernel.org代发]Re: [PATCH v2] usb: musb: Fix musb_gadget.c rxstate may cause request->buf overflow problems
  • From: Andy Guo (郭卫斌) <guoweibin@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: usb: Add binding for TI USB8041 hub controller
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: handling MAC set by user space in reset_resume() of r8152
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] usb: misc: onboard_usb_hub: Add reset-gpio support
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v4 1/2] usb: misc: onboard_usb_hub: Add reset-gpio support
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] usb: misc: onboard_usb_hub: Add TI USB8041 hub support
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] usb: misc: onboard_usb_hub: Add reset-gpio support
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH] xhci: tegra: USB2 pad power controls
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH v4 1/2] usb: misc: onboard_usb_hub: Add reset-gpio support
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH v4 2/2] usb: misc: onboard_usb_hub: Add TI USB8041 hub support
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 210425] Plugging in or unplugging power cord while system is suspended does not trigger updates
  • From: bugzilla-daemon@xxxxxxxxxx
• [PATCH] USB: usbsevseg: convert sysfs snprintf to sysfs_emit
  • From: Xuezhi Zhang <zhangxuezhi3@xxxxxxxxx>
• Re: [PATCH v3 2/3] usb: misc: onboard_usb_hub: Add reset-gpio support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Fix typo 'the the' in comment
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: typec: anx7411: fix passing a valid pointer to 'PTR_ERR'
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: trancevibrator: simplify tv_probe
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v20 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: gadget: Fix use-after-free Read in usb_udc_uevent()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] usb: gadget: f_uac2: fix superspeed transfer
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• handling MAC set by user space in reset_resume() of r8152
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH] usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH] xhci: tegra: USB2 pad power controls
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] xhci: tegra: USB2 pad power controls
  • From: Jim Lin <jilin@xxxxxxxxxx>
• Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: usb: Add binding for TI USB8041 hub controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: usb: Add binding for TI USB8041 hub controller
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH v3 3/3] usb: misc: onboard_usb_hub: Add TI USB8041 hub support
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH v3 2/3] usb: misc: onboard_usb_hub: Add reset-gpio support
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: musb: Fix musb_gadget.c rxstate may cause request->buf overflow problems
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [ldv-project] [PATCH v2] usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• [PATCH v2] usb: musb: Fix musb_gadget.c rxstate may cause request->buf overflow problems
  • From: Andy Guo (郭卫斌) <guoweibin@xxxxxxxxxx>
• Re: [PATCH] usb/chipidea: fix repeated words in comments
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [PATCH v2] usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• [PATCH net-next] net: usb: delete extra space and tab in blank line
  • From: studentxswpy@xxxxxxx
• Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH] usb: musb: Fix musb_gadget.c rxstate may cause request->buf overflow problems
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: musb: Fix musb_gadget.c rxstate may cause request->buf overflow problems
  • From: Andy Guo (郭卫斌) <guoweibin@xxxxxxxxxx>
• Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH 2/2] USB: gadget: f_hid: Add Set-Feature report
  • From: Vicki Pfau <vi@xxxxxxxxxxx>
• [PATCH v2 -next] usb: renesas-xhci: Do not print any log while fw verif success
  • From: Chen Xingdi <chenxingdi@xxxxxxxxxx>
• 答复: [PATCH -next] usb: renesas-xhci: Use pr_info while fw verify success
  • From: chenxingdi <chenxingdi@xxxxxxxxxx>
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• [PATCH v2] usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH] usb: musb: Fix musb_gadget.c rxstate may cause request->buf overflow problems
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: gadget: at91_udc: stop using legacy pm ops
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH -next] usb: renesas-xhci: Use pr_info while fw verify success
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: typec: retimer: Add missing id check in match callback
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH] usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [Bug 215890] Regression in 5.18: bcm5974 trackpad causes error: xhci_hcd rejecting DMA map of vmalloc memory
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v3] USB: HCD: Fix URB giveback issue in tasklet function
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH 2/2] usb: gadget: udc: atmel: remove #ifdef CONFIG_PM_SLEEP
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 1/2] usb: gadget: at91_udc: stop using legacy pm ops
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  • From: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: gadget: f_hid: Add Set-Feature report
  • From: Maxim Devaev <mdevaev@xxxxxxxxx>
• Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v2] usb: typec: tipd: Don't block probing of consumer of "connector" nodes
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v2 4/4] ARM: multi_v7_defconfig: enable USB onboard HUB driver
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 2/4] usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 0/4] usb: misc: adopt onboard hub support on stm32mp1 boards
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 3/4] ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v3] USB: HCD: Fix URB giveback issue in tasklet function
  • From: Weitao Wang <WeitaoWang-oc@xxxxxxxxxxx>
• Re: [PATCH v5] watchdog: add driver for StreamLabs USB watchdog device
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v2] USB: HCD: Fix URB giveback issue in tasklet function
  • From: "WeitaoWang-oc@xxxxxxxxxxx" <WeitaoWang-oc@xxxxxxxxxxx>
• [PATCH] usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
  • From: Linyu Yuan <quic_linyyuan@xxxxxxxxxxx>
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH -next] usb: renesas-xhci: Use pr_info while fw verify success
  • From: Chen Xingdi <chenxingdi@xxxxxxxxxx>
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: szuni chen <szunichen@xxxxxxxxx>
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v5] watchdog: add driver for StreamLabs USB watchdog device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v5] watchdog: add driver for StreamLabs USB watchdog device
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• [Bug 216282] usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• [PATCH 1/2] USB: gadget: f_hid: Add Get-Feature report
  • From: Vicki Pfau <vi@xxxxxxxxxxx>
• [PATCH 2/2] USB: gadget: f_hid: Add Set-Feature report
  • From: Vicki Pfau <vi@xxxxxxxxxxx>
• Re: [PATCH v5] watchdog: add driver for StreamLabs USB watchdog device
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Jonathan Woithe <jwoithe@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: usb: renesas, usb3-peri: Document RZ/V2M r9a09g011 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• [Bug 216282] New: usb-mass storage
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v2 1/6] dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H
  • From: Rob Herring <robh@xxxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS b6de1f901039cfcbd605842d454bd80c589105d8
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] usb: typec: retimer: Add missing id check in match callback
  • From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
• [PATCH] usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 0/7] USB: cdc: add control and state defines
  • From: Yan Xinyu <sdlyyxy@xxxxxxxxxxx>
• Re: [PATCH v5] watchdog: add driver for StreamLabs USB watchdog device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5] watchdog: add driver for StreamLabs USB watchdog device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] USB: HCD: Fix URB giveback issue in tasklet function
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [GIT PULL] USB-serial updates for 5.20-rc1
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/7] USB: cdc-acm: use CDC serial-state defines
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH 3/7] USB: cdc-acm: use CDC control-line defines
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH 2/7] USB: cdc: add serial-state defines
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [GIT PULL] USB-serial updates for 5.20-rc1
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/7] USB: cdc: add control-signal defines
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH] USB: serial: fix tty-port initialized comments
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: fix tty-port initialized comments
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 0/7] USB: cdc: add control and state defines
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] USB: serial: fix tty-port initialized comments
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] USB: HCD: Fix URB giveback issue in tasklet function
  • From: "WeitaoWang-oc@xxxxxxxxxxx" <WeitaoWang-oc@xxxxxxxxxxx>
• Re: [PATCH 0/7] USB: cdc: add control and state defines
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5] watchdog: add driver for StreamLabs USB watchdog device
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] USB: serial: fix tty-port initialized comments
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v2] USB: HCD: Fix URB giveback issue in tasklet function
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
• Re: [PATCH v6 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 09/13] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 7/7] USB: serial: usb_wwan: replace DTR/RTS magic numbers with macros
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 4/7] USB: cdc-acm: use CDC serial-state defines
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 3/7] USB: cdc-acm: use CDC control-line defines
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 6/7] USB: gadget: f_acm: use CDC defines
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 0/7] USB: cdc: add control and state defines
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 2/7] USB: cdc: add serial-state defines
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 1/7] USB: cdc: add control-signal defines
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 5/7] staging: gdm724x: drop unused CDC defines
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v6 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v6 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2] USB: HCD: Fix URB giveback issue in tasklet function
  • From: Weitao Wang <WeitaoWang-oc@xxxxxxxxxxx>
• [PATCH v5] watchdog: add driver for StreamLabs USB watchdog device
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• Re: [PATCH v2 5/6] usb: typec: tcpci_rt1711h: Add compatible id with rt1715
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v5 1/2] phy: usb: Add USB2.0 phy driver for Sunplus SP7021
  • From: Vincent Shih <vincent.sunplus@xxxxxxxxx>
• [PATCH v5 2/2] dt-bindings: phy: Add bindings doc for Sunplus USB2 PHY driver
  • From: Vincent Shih <vincent.sunplus@xxxxxxxxx>
• [PATCH v5 0/2] Add USB2.0 phy driver for Sunplus SP7021
  • From: Vincent Shih <vincent.sunplus@xxxxxxxxx>
• Re: [PATCH v3] USB: serial: usb_wwan: replace DTR/RTS magic numbers with macros
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] USB: usb-serial-simple: add new device id for OPPO R11
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3] USB: serial: usb_wwan: replace DTR/RTS magic numbers with macros
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] USB: serial: usb_wwan: replace DTR/RTS magic numbers with macros
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] USB: usb-serial-simple: add new device id for OPPO R11
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] USB: serial: usb_wwan: replace DTR/RTS magic numbers with macros
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/7] USB: serial: ftdi_sio: Fix custom_divisor and c_*speed for ASYNC_SPD_CUST
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 6/7] USB: serial: ftdi_sio: Fix custom_divisor and c_*speed for ASYNC_SPD_CUST
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v2 6/7] USB: serial: ftdi_sio: Fix custom_divisor and c_*speed for ASYNC_SPD_CUST
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 7/7] USB: serial: ftdi_sio: Fill c_*speed fields with real baud rate
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 6/7] USB: serial: ftdi_sio: Fix custom_divisor and c_*speed for ASYNC_SPD_CUST
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v2 6/7] USB: serial: ftdi_sio: Fix custom_divisor and c_*speed for ASYNC_SPD_CUST
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 5/7] USB: serial: ftdi_sio: Fix baud rate rounding for ASYNC_SPD_CUST
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 4/7] USB: serial: ftdi_sio: Do not reset baud rate to 9600 Baud on error
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 3/7] USB: serial: ftdi_sio: Extract SIO divisor code to function
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 1/7] USB: serial: ftdi_sio: Fix divisor overflow
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3] USB: serial: usb_wwan: replace DTR/RTS magic numbers with macros
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] USB: serial: option: add Quectel EM060K modem
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3] docs: fixed table margin in configfs-usb-gadget-mass-storage
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• [usb:usb-next] BUILD SUCCESS b7423bb23cdd0ee4850279742158a64a4bb25ef0
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] USB: usb-serial-simple: add new device id for OPPO R11
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2] docs: fixed table margin in configfs-usb-gadget-mass-storage
  • From: Maxim Devaev <mdevaev@xxxxxxxxx>
• [PATCH v3] docs: fixed table margin in configfs-usb-gadget-mass-storage
  • From: Maxim Devaev <mdevaev@xxxxxxxxx>
• Re: [PATCH v2] docs: fixed table margin in configfs-usb-gadget-mass-storage
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH -next] usb: ehci: Read CMD_RUN instead of STS_HALT in ehci_halt with ZX-200
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] docs: fixed table margin in configfs-usb-gadget-mass-storage
  • From: Maxim Devaev <mdevaev@xxxxxxxxx>
• [PATCH -next] usb: ehci: Read CMD_RUN instead of STS_HALT in ehci_halt with ZX-200
  • From: xy521521 <xy521521@xxxxxxxxx>
• Re: [PATCH v2 0/5] net: usb: ax88179_178a: improvements and bug fixes
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v2 4/5] usb: dwc3: Allow end transfer commands to be sent during soft disconnect
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: linux-next: Tree for Jul 22 [drivers/usb/dwc3/dwc3-qcom.ko]
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH] usb: xhci_plat_remove: avoid NULL dereference
  • From: Alexey Sheplyakov <asheplyakov@xxxxxxxxxx>
• Re: [PATCH] usb: xhci_plat_remove: avoid NULL dereference
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: xhci_plat_remove: avoid NULL dereference
  • From: Alexey Sheplyakov <asheplyakov@xxxxxxxxxx>
• Re: [PATCH v6 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [syzbot] INFO: task hung in __input_unregister_device (4)
  • From: syzbot <syzbot+deb6abc36aad4008f407@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] INFO: task hung in __input_unregister_device (4)
  • From: "Fabio M. De Francesco" <fmdefrancesco@xxxxxxxxx>
• [PATCH 2/4] usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 0/4] usb: misc: adopt onboard hub support on stm32mp1 boards
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 3/4] ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 4/4] ARM: multi_v7_defconfig: enable USB onboard HUB driver
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 2/2] usb: gadget: udc: renesas_usb3: Add support for RZ/V2M
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: usb: renesas, usb3-peri: Document RZ/V2M r9a09g011 support
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [PATCH v2 0/2] Add usb gadget support for RZ/V2M
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 09/13] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 06/13] dt-bindings: mfd: Add MediaTek MT6370
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 05/13] dt-bindings: backlight: Add MediaTek MT6370 backlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 04/13] dt-bindings: leds: Add MediaTek MT6370 flashlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 03/13] dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 02/13] dt-bindings: power: supply: Add MediaTek MT6370 Charger
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 01/13] dt-bindings: usb: Add MediaTek MT6370 TCPC
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 00/13] Add MediaTek MT6370 PMIC support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH] xhci: Fix typo 'the the' in comment
  • From: Slark Xiao <slark_xiao@xxxxxxx>
• [PATCH v3] USB: serial: usb_wwan: replace DTR/RTS magic numbers with macros
  • From: Yan Xinyu <sdlyyxy@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: verdin-imx8mm: add otg2 pd to usbphy
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• [PATCH 2/3] usb: typec: anx7411: fix passing a valid pointer to 'PTR_ERR'
  • From: Xin Ji <xji@xxxxxxxxxxxxxxxx>
• [PATCH 3/3] usb: typec: anx7411: fix missing error code 'ret'
  • From: Xin Ji <xji@xxxxxxxxxxxxxxxx>
• [PATCH 1/3] usb: typec: anx7411: fix passing zero to 'PTR_ERR'
  • From: Xin Ji <xji@xxxxxxxxxxxxxxxx>
• [PATCH] arm64: dts: verdin-imx8mm: add otg2 pd to usbphy
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: typec: anx7411: use semi-colons instead of commas
  • From: Xin Ji <xji@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: typec: anx7411: fix error checking in anx7411_get_gpio_irq()
  • From: Xin Ji <xji@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: typec: anx7411: Fix an array out of bounds
  • From: Xin Ji <xji@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] usb: typec: tcpci_rt1711h: Add regulator support when source vbus
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• Re: [PATCH v2] USB: serial: usb_wwan: replace DTR/RTS magic numbers with macros
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] usb: typec: anx7411: use semi-colons instead of commas
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 2/3] usb: typec: anx7411: fix error checking in anx7411_get_gpio_irq()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 1/3] usb: typec: anx7411: Fix an array out of bounds
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] usb: phy: check the return value of ioremap() in usb_otg_start()
  • From: williamsukatube@xxxxxxx
• Re: [PATCH v2] USB: serial: usb_wwan: replace DTR/RTS magic numbers with macros
  • From: Yan Xinyu <sdlyyxy@xxxxxxxxxxx>
• Re: [PATCH] USB: HCD: Fix URB giveback issue in tasklet function
  • From: "WeitaoWang-oc@xxxxxxxxxxx" <WeitaoWang-oc@xxxxxxxxxxx>
• Re: [PATCH v2 4/5] usb: dwc3: Allow end transfer commands to be sent during soft disconnect
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: usb: typec: add bindings for stm32g0 controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 6/6] usb: typec: tcpci_rt1711h: Fix CC PHY noise filter of voltage level
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 4/5] usb: dwc3: Allow end transfer commands to be sent during soft disconnect
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v2 4/5] usb: dwc3: Allow end transfer commands to be sent during soft disconnect
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v2] usb: typec: tipd: Don't block probing of consumer of "connector" nodes
  • From: Saravana Kannan <saravanak@xxxxxxxxxx>
• Re: [PATCH v2 4/5] usb: dwc3: Allow end transfer commands to be sent during soft disconnect
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• RE: [PATCH 2/2] usb: gadget: udc: renesas_usb3: Add support for RZ/V2M
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH v2 4/5] usb: dwc3: Allow end transfer commands to be sent during soft disconnect
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v2 4/5] usb: dwc3: Allow end transfer commands to be sent during soft disconnect
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v2 4/5] usb: dwc3: Allow end transfer commands to be sent during soft disconnect
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] usb: misc: onboard_usb_hub: Add TI USB8041 hub support
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] usb: misc: onboard_usb_hub: Add reset-gpio support
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH] USB: serial: usb_wwan: replace DTR/RTS magic numbers with macros
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] USB: serial: usb_wwan: replace DTR/RTS magic numbers with macros
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: HCD: Fix URB giveback issue in tasklet function
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2] USB: serial: usb_wwan: replace DTR/RTS magic numbers with macros
  • From: Yan Xinyu <sdlyyxy@xxxxxxxxxxx>
• [PATCH] USB: serial: usb_wwan: replace DTR/RTS magic numbers with macros
  • From: sdlyyxy <sdlyyxy@xxxxxxxxxxx>
• [PATCH] USB: gadget: Fix use-after-free Read in usb_udc_uevent()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] usb: typec: tcpci_rt1711h: Add compatible id with rt1715
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 4/6] usb: typec: tcpci_rt1711h: Add initial phy setting
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/6] usb: typec: tcpci_rt1711h: Fix vendor setting when set vconn
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 3/6] usb: typec: tcpci_rt1711h: Add regulator support when source vbus
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [syzbot] KASAN: use-after-free Read in usb_udc_uevent
  • From: syzbot <syzbot+b0de012ceb1e2a97891b@xxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] usb: gadget: udc: renesas_usb3: Add support for RZ/V2M
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [syzbot] KASAN: use-after-free Read in usb_udc_uevent
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH] USB: HCD: Fix URB giveback issue in tasklet function
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] usb: gadget: udc: renesas_usb3: Add support for RZ/V2M
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• RE: [PATCH 2/2] usb: gadget: udc: renesas_usb3: Add support for RZ/V2M
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [PATCH 2/2] usb: gadget: udc: renesas_usb3: Add support for RZ/V2M
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH 2/2] usb: gadget: udc: renesas_usb3: Add support for RZ/V2M
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: renesas, usb3-peri: Document RZ/V2M r9a09g011 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: gadget: udc: renesas_usb3: Add support for RZ/V2M
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH 1/2] dt-bindings: usb: renesas, usb3-peri: Document RZ/V2M r9a09g011 support
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH] USB: HCD: Fix URB giveback issue in tasklet function
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• dt-bindings: generic-ehci.yaml doesn't work well with usb-hcd.yaml
  • From: Rafał Miłecki <rafal@xxxxxxxxxx>
• Re: [PATCH] USB: HCD: Fix URB giveback issue in tasklet function
  • From: "WeitaoWang-oc@xxxxxxxxxxx" <WeitaoWang-oc@xxxxxxxxxxx>
• Re: [PATCH] USB: HCD: Fix URB giveback issue in tasklet function
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH v1] USB: serial: ftdi_sio: add IDs for NEW FTDI Products
  • From: Amireddy mallikarjuna reddy <mallikarjuna.reddy@xxxxxxxxxxxx>
• [PATCH -next 2/3] usb: typec: anx7411: Fix return value check in anx7411_register_i2c_dummy_clients()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH -next 1/3] usb: typec: anx7411: Fix wrong pointer passed to PTR_ERR()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH -next 3/3] usb: typec: anx7411: Fix error return code in anx7411_i2c_probe()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH] USB: HCD: Fix URB giveback issue in tasklet function
  • From: Weitao Wang <WeitaoWang-oc@xxxxxxxxxxx>
• [PATCH v11 3/3] arm64: dts: qcom: sc7280: Update SNPS Phy params for SC7280 IDP device
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v11 2/3] phy: qcom-snps: Add support for overriding phy tuning parameters
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v11 0/3] Add QCOM SNPS PHY overriding params support
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v11 1/3] dt-bindings: phy: qcom,usb-snps-femto-v2: Add phy override params bindings
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2 6/6] usb: typec: tcpci_rt1711h: Fix CC PHY noise filter of voltage level
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v2 5/6] usb: typec: tcpci_rt1711h: Add compatible id with rt1715
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v2 4/6] usb: typec: tcpci_rt1711h: Add initial phy setting
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v2 1/6] dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v2 3/6] usb: typec: tcpci_rt1711h: Add regulator support when source vbus
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v2 2/6] usb: typec: tcpci_rt1711h: Fix vendor setting when set vconn
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v2 0/6] usb: typec: tcpci_rt1711h: Add compatible with rt1715
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH v5] usb: gadget: f_uac2: fix superspeed transfer
  • From: Jack Pham <quic_jackp@xxxxxxxxxxx>
• [PATCH v2 4/5] net: usb: ax88179_178a: move priv to driver_priv
  • From: justinpopo6@xxxxxxxxx
• [PATCH v2 5/5] net: usb: ax88179_178a: wol optimizations
  • From: justinpopo6@xxxxxxxxx
• [PATCH v2 3/5] net: usb: ax88179_178a: restore state on resume
  • From: justinpopo6@xxxxxxxxx
• [PATCH v2 2/5] net: usb: ax88179_178a: clean up pm calls
  • From: justinpopo6@xxxxxxxxx
• [PATCH v2 1/5] net: usb: ax88179_178a: remove redundant init code
  • From: justinpopo6@xxxxxxxxx
• [PATCH v2 0/5] net: usb: ax88179_178a: improvements and bug fixes
  • From: justinpopo6@xxxxxxxxx
• Re: [PATCH v4] usb: gadget: f_uac2: fix superspeed transfer
  • From: Jack Pham <quic_jackp@xxxxxxxxxxx>
• Re: [PATCH v2 3/5] usb: dwc3: gadget: Adjust IRQ management during soft disconnect/connect
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [RFC PATCH 0/1] hibernate and roothub port power
  • From: Evan Green <evgreen@xxxxxxxxxx>
• [PATCH 2/2] usb: dwc3: trace: add Start of Frame Number to trace event
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 1/2] usb: dwc3: debug: show events parameters in hex
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] usb: dwc3: gadget: conditionally remove requests
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH] USB:do not initialise statics to 0.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB:do not initialise statics to 0.
  • From: Xin Gao <gaoxin@xxxxxxxxxx>
• Re: [PATCH v2 3/5] usb: dwc3: gadget: Adjust IRQ management during soft disconnect/connect
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [syzbot] KASAN: use-after-free Read in usb_udc_uevent
  • From: syzbot <syzbot+b0de012ceb1e2a97891b@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [Bug 216243] Shutdown successful but machine does not power off
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 216243] Shutdown successful but machine does not power off
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: serial: usb: cdc-acm: OMRON B5L ToF, device probe failed
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [Bug 216243] Shutdown successful but machine does not power off
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v2 2/4] target: Implement TMR_ABORT_TASK_SET
  • From: Konstantin Shelekhin <k.shelekhin@xxxxxxxxx>
• [PATCH v3] usb: gadget: uvc: increase worker prio to WQ_HIGHPRI
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  • From: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx>
• Re: serial: usb: cdc-acm: OMRON B5L ToF, device probe failed
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [RESEND v2 2/3] usb: gadget: uvc: increase worker prio to WQ_HIGHPRI
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [Bug 216243] Shutdown successful but machine does not power off
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH] usb: trancevibrator: simplify tv_probe
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] usb: trancevibrator: simplify tv_probe
  • From: Dongliang Mu <mudongliangabcd@xxxxxxxxx>
• Re: [PATCH] usb: trancevibrator: simplify tv_probe
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH] usb: trancevibrator: simplify tv_probe
  • From: Dongliang Mu <dzm91@xxxxxxxxxxx>
• Re: Re: [PATCH v2 3/3] usb: misc: onboard_usb_hub: Add TI USB8041 hub support
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: Re: [PATCH v2 2/3] usb: misc: onboard_usb_hub: Add reset-gpio support
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: Re: [PATCH v2 1/3] dt-bindings: usb: Add binding for TI USB8041 hub controller
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: Re: [PATCH v2 1/3] dt-bindings: usb: Add binding for TI USB8041 hub controller
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH v5 2/2] net/cdc_ncm: Increase NTB max RX/TX values to 64kb
  • From: Łukasz Spintzyk <lukasz.spintzyk@xxxxxxxxxxxxx>
• [PATCH v5 1/2] net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices
  • From: Łukasz Spintzyk <lukasz.spintzyk@xxxxxxxxxxxxx>
• Re: [PATCH v20 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support
  • From: Xin Ji <xji@xxxxxxxxxxxxxxxx>
• Re: [PATCH net] r8152: fix a WOL issue
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [usb:usb-testing] BUILD SUCCESS 32f02a211b0a192553075803b0b819027f96bb43
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/4] target: Implement TMR_ABORT_TASK_SET
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [RESEND v2 2/3] usb: gadget: uvc: increase worker prio to WQ_HIGHPRI
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] target: Handle MI_REPORT_SUPPORTED_OPERATION_CODES
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v2 1/4] target: Handle MI_REPORT_SUPPORTED_OPERATION_CODES
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 0/2] usb: dwc3: core: Enable GUCTL1 bit 10 for fixing crc error after resume
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] net: usb: ax88179_178a: remove redundant init code
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH 4/5] net: usb: ax88179_178a: move priv to driver_priv
  • From: Jose Alonso <joalonsof@xxxxxxxxx>
• Re: [PATCH 2/4] xhci: turn off port power in shutdown
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] USB: mtu3: tracing: Use the new __vstring() helper
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: [PATCH v2 2/4] target: Implement TMR_ABORT_TASK_SET
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [PATCH v2 1/4] target: Handle MI_REPORT_SUPPORTED_OPERATION_CODES
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v2] USB: mtu3: tracing: Use the new __vstring() helper
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [for-next][PATCH 13/23] USB: mtu3: tracing: Use the new __vstring() helper
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH 2/4] xhci: turn off port power in shutdown
  • From: Joey Corleone <joey.corleone@xxxxxxx>
• Re: [PATCH v2 1/4] target: Handle MI_REPORT_SUPPORTED_OPERATION_CODES
  • From: Konstantin Shelekhin <k.shelekhin@xxxxxxxxx>
• [PATCH] xhci: Fix comment typo
  • From: Jason Wang <wangborong@xxxxxxxxxx>
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Jonathan Woithe <jwoithe@xxxxxxxxxx>
• Re: [PATCH v4 2/2] net/cdc_ncm: Increase NTB max RX/TX values to 64kb
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v4 1/2] net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: serial: option: add Quectel EM060K modem
  • From: Yonglin Tan <yonglin.tan@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: renesas, usb3-peri: Document RZ/V2M r9a09g011 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS 88a15fbb47db483d06b12b1ae69f114b96361a96
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 03/25] usb: gadget: f_tcm: Increase stream count
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
• RE: [PATCH 1/2] dt-bindings: usb: renesas, usb3-peri: Document RZ/V2M r9a09g011 support
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Jonathan Woithe <jwoithe@xxxxxxxxxx>
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 1/3] clk: lan966x: Fix the lan966x clock gate register address
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2] platform/chrome: cros_typec_switch: Add ACPI Kconfig dep
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: renesas, usb3-peri: Document RZ/V2M r9a09g011 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Jonathan Woithe <jwoithe@xxxxxxxxxx>
• [PATCH v4 1/2] net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices
  • From: Łukasz Spintzyk <lukasz.spintzyk@xxxxxxxxxxxxx>
• [PATCH v4 2/2] net/cdc_ncm: Increase NTB max RX/TX values to 64kb
  • From: Łukasz Spintzyk <lukasz.spintzyk@xxxxxxxxxxxxx>
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [for-next][PATCH 13/23] USB: mtu3: tracing: Use the new __vstring() helper
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: [for-next][PATCH 13/23] USB: mtu3: tracing: Use the new __vstring() helper
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Jonathan Woithe <jwoithe@xxxxxxxxxx>
• [PATCH v2 07/25] usb: gadget: f_tcm: Limit number of sessions
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH] sr9700: improve packet length sanity check
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• [PATCH v20 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support
  • From: Xin Ji <xji@xxxxxxxxxxxxxxxx>
• [PATCH v20 1/2] dt-bindings: usb: Add analogix anx7411 PD binding
  • From: Xin Ji <xji@xxxxxxxxxxxxxxxx>
• [PATCH v2 20/25] usb: gadget: f_tcm: Save CPU ID per command
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 23/25] usb: gadget: f_tcm: Handle TASK_MANAGEMENT commands
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 03/25] usb: gadget: f_tcm: Increase stream count
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 00/25] usb: gadget: f_tcm: Enhance UASP driver
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 05/25] usb: gadget: f_tcm: Don't set static stream_id
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 21/25] usb: gadget: f_tcm: Get stream by tag
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 14/25] usb: gadget: f_tcm: Translate error to sense
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 19/25] usb: gadget: f_tcm: Decrement command ref count on cleanup
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 22/25] usb: gadget: f_tcm: Send sense on cancelled transfer
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 13/25] usb: gadget: f_tcm: Don't free command immediately
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 08/25] usb: gadget: f_tcm: Handle multiple commands in parallel
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 4/4] target: Properly set Sense data length when copy sense
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 3/4] target: Properly set Sense Data Length of CHECK CONDITION
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 2/4] target: Implement TMR_ABORT_TASK_SET
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 1/4] target: Handle MI_REPORT_SUPPORTED_OPERATION_CODES
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 09/25] usb: gadget: f_tcm: Use extra number of commands
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 0/4] target: Updates related to UASP
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 04/25] usb: gadget: f_tcm: Increase bMaxBurst
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 01/25] target: Add overlapped response to tmrsp_table
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 12/25] usb: gadget: f_tcm: Minor cleanup redundant code
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 02/25] target: Add common TMR enum
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 15/25] usb: gadget: f_tcm: Cleanup unused variable
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 10/25] usb: gadget: f_tcm: Return ATA cmd direction
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 16/25] usb: gadget: f_tcm: Update state on data write
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 06/25] usb: gadget: f_tcm: Allocate matching number of commands to streams
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 11/25] usb: gadget: f_tcm: Execute command on write completion
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 24/25] usb: gadget: f_tcm: Check overlapped command
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 17/25] usb: gadget: f_tcm: Handle abort command
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 25/25] usb: gadget: f_tcm: Comply with UAS Task Management requirement
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 18/25] usb: gadget: f_tcm: Cleanup requests on ep disable
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH 5/5] net: usb: ax88179_178a: wol optimizations
  • From: justinpopo6@xxxxxxxxx
• [PATCH 3/5] net: usb: ax88179_178a: restore state on resume
  • From: justinpopo6@xxxxxxxxx
• [PATCH 4/5] net: usb: ax88179_178a: move priv to driver_priv
  • From: justinpopo6@xxxxxxxxx
• [PATCH 2/5] net: usb: ax88179_178a: clean up pm calls
  • From: justinpopo6@xxxxxxxxx
• [PATCH 1/5] net: usb: ax88179_178a: remove redundant init code
  • From: justinpopo6@xxxxxxxxx
• [PATCH 0/5] net: usb: ax88179_178a: improvements and bug fixes
  • From: justinpopo6@xxxxxxxxx
• [PATCH v2] platform/chrome: cros_typec_switch: Add ACPI Kconfig dep
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH] USB: usb-serial-simple: add new device id for OPPO R11
  • From: Reinhard Speyerer <rspmn@xxxxxxxx>
• Re: [usb:usb-testing 50/55] drivers/platform/chrome/cros_typec_switch.c:93:9: error: call to undeclared function 'acpi_evaluate_integer'; ISO C99 and later do not support implicit function declarations
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• [PATCH] platform/chrome: cros_typec_switch: Add ACPI Kconfig dep
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• [PATCH v2 3/3] USB: host: npcm: Add NPCM8XX support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v2 0/3] usb: host: npcm7xx-ehci: add Arbel NPCM8XX support and remove reset sequence
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: usb: npcm7xx: Add npcm845 compatible
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v2 1/3] usb: host: npcm7xx: remove USB EHCI host reset sequence
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v2] usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
  • From: Andrey Strachuk <strochuk@xxxxxxxxx>
• RE: [PATCH 1/2] dt-bindings: usb: renesas, usb3-peri: Document RZ/V2M r9a09g011 support
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] net/cdc_ncm: Increase NTB max RX/TX values to 64kb
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/3] usb: host: npcm7xx: remove USB EHCI host reset sequence
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] dt-bindings: usb: qcom,dwc3: Add SM6375 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 1/3] usb: host: npcm7xx: remove USB EHCI host reset sequence
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: phy: Add bindings doc for Sunplus USB2
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] USB: usb-serial-simple: add new device id for OPPO R11
  • From: Yan Xinyu <sdlyyxy@xxxxxxxxxxx>
• Re: [PATCH v5 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v1 2/3] dt-bindings: usb: npcm7xx: Add npcm845 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: renesas, usb3-peri: Document RZ/V2M r9a09g011 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/2] usb: gadget: udc: renesas_usb3: Add support for RZ/V2M
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: usb: renesas, usb3-peri: Document RZ/V2M r9a09g011 support
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [PATCH 0/2] Add usb gadget support for RZ/V2M
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [PATCH v1 0/3] usb: host: npcm7xx-ehci: add Arbel NPCM8XX support and remove reset sequence
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 1/3] usb: host: npcm7xx: remove USB EHCI host reset sequence
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 3/3] USB: host: npcm: Add NPCM8XX support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 2/3] dt-bindings: usb: npcm7xx: Add npcm845 compatible
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH v1 1/3] usb: host: npcm7xx: remove USB EHCI host reset sequence
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v3 2/2] net/cdc_ncm: Increase NTB max RX/TX values to 64kb
  • From: Łukasz Spintzyk <lukasz.spintzyk@xxxxxxxxxxxxx>
• [PATCH v3 1/2] net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices
  • From: Łukasz Spintzyk <lukasz.spintzyk@xxxxxxxxxxxxx>
• Re: [PATCH v5 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [usb:usb-testing 43/55] drivers/usb/typec/anx7411.c:387 anx7411_register_partner() warn: passing zero to 'PTR_ERR'
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v5 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v4 2/2] dt-bindings: phy: Add bindings doc for Sunplus USB2
  • From: Vincent Shih <vincent.sunplus@xxxxxxxxx>
• [PATCH v4 0/2] Add USB2.0 phy driver for Sunplus SP7021
  • From: Vincent Shih <vincent.sunplus@xxxxxxxxx>
• [PATCH v4 1/2] phy: usb: Add USB2.0 phy driver for Sunplus SP7021
  • From: Vincent Shih <vincent.sunplus@xxxxxxxxx>
• Re: [PATCH] usb/serial: fix repeated words in comments
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] usb/typec/tcpm: fix repeated words in comments
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH net] r8152: fix a WOL issue
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• Re: [PATCH v5 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Jonathan Woithe <jwoithe@xxxxxxxxxx>
• Re: [PATCH v4] watchdog: add driver for StreamLabs USB watchdog device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4] watchdog: add driver for StreamLabs USB watchdog device
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• Re: [PATCH] usb: aspeed-vhub: Fix refcount leak bug in ast_vhub_init_desc()
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [PATCH] USB: usb-serial-simple: add new device id for OPPO R11
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: usb-serial-simple: add new device id for OPPO R11
  • From: Reinhard Speyerer <rspmn@xxxxxxxx>
• Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Pavel Machek <pavel@xxxxxx>
• [usb:usb-testing 50/55] drivers/platform/chrome/cros_typec_switch.c:93:9: error: call to undeclared function 'acpi_evaluate_integer'; ISO C99 and later do not support implicit function declarations
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v4] watchdog: add driver for StreamLabs USB watchdog device
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/3] usb: typec: tcpci_rt1711h: Add compatible with rt1715
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 4/6] dt-bindings: usb: qcom,dwc3: Add SM6375 compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
• Re: [GIT PULL] USB driver fixes for 5.19-rc7
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH] usb/storage: fix repeated words in comments
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb/host: fix repeated words in comments
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb/typec/tcpm: fix repeated words in comments
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] usb/typec/tcpm: fix repeated words in comments
  • From: Jilin Yuan <yuanjilin@xxxxxxxxxx>
• [PATCH] usb/storage: fix repeated words in comments
  • From: Jilin Yuan <yuanjilin@xxxxxxxxxx>
• [PATCH] usb/serial: fix repeated words in comments
  • From: Jilin Yuan <yuanjilin@xxxxxxxxxx>
• [PATCH] usb/musb: fix repeated words in comments
  • From: Jilin Yuan <yuanjilin@xxxxxxxxxx>
• [PATCH] usb/misc: fix repeated words in comments
  • From: Jilin Yuan <yuanjilin@xxxxxxxxxx>
• [PATCH] usb/image: fix repeated words in comments
  • From: Jilin Yuan <yuanjilin@xxxxxxxxxx>
• [PATCH] usb/host: fix repeated words in comments
  • From: Jilin Yuan <yuanjilin@xxxxxxxxxx>
• Re: [PATCH] USB: usb-serial-simple: add new device id for OPPO R11
  • From: sdlyyxy <sdlyyxy@xxxxxxxxxxx>
• [PATCH] usb/host: fix repeated words in comments
  • From: Jilin Yuan <yuanjilin@xxxxxxxxxx>
• [PATCH] usb/dwc3: fix repeated words in comments
  • From: Jilin Yuan <yuanjilin@xxxxxxxxxx>
• [PATCH] usb/dwc2: fix repeated words in comments
  • From: Jilin Yuan <yuanjilin@xxxxxxxxxx>
• [PATCH] usb/core: fix repeated words in comments
  • From: Jilin Yuan <yuanjilin@xxxxxxxxxx>
• [PATCH] usb/chipidea: fix repeated words in comments
  • From: Jilin Yuan <yuanjilin@xxxxxxxxxx>
• [PATCH] usb/atm: fix repeated words in comments
  • From: Jilin Yuan <yuanjilin@xxxxxxxxxx>
• Re: [PATCH v4] watchdog: add driver for StreamLabs USB watchdog device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] usb: cdns3: removed useless condition in cdns3_gadget_ep_dequeue()
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [PATCH] USB: usb-serial-simple: add new device id for OPPO R11
  • From: Reinhard Speyerer <rspmn@xxxxxxxx>
• [GIT PULL] USB driver fixes for 5.19-rc7
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS c76d09da77d69d7f737540985912ad2bca654713
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: usb: Add binding for TI USB8041 hub controller
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v4] watchdog: add driver for StreamLabs USB watchdog device
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• [PATCH] usb: phy: remove redundant store to variable var after & operation
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• Re: [for-next][PATCH 13/23] USB: mtu3: tracing: Use the new __vstring() helper
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH v2] usb: serial: qcserial: add EM9191 support
  • From: Frans Klaver <fransklaver@xxxxxxxxx>
• Re: [for-next][PATCH 13/23] USB: mtu3: tracing: Use the new __vstring() helper
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH v2] usb: serial: qcserial: add EM9191 support
  • From: Reinhard Speyerer <rspmn@xxxxxxxx>
• Re: [PATCH v2] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] usb: misc: onboard_usb_hub: Add TI USB8041 hub support
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] usb: misc: onboard_usb_hub: Add reset-gpio support
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 12/13] leds: flashlight: mt6370: Add MediaTek MT6370 flashlight support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 3486af89dd3c0b0bef194c4bccf17c31ef16b99f
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 1/2] phy: usb: Add USB2.0 phy driver for Sunplus SP7021
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] USB: usb-serial-simple: add new device id for OPPO R11
  • From: sdlyyxy <sdlyyxy@xxxxxxxxxxx>
• Re: [for-next][PATCH 13/23] USB: mtu3: tracing: Use the new __vstring() helper
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH] USB: usb-serial-simple: add new device id for OPPO R11
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 06/13] dt-bindings: mfd: Add MediaTek MT6370
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] usb: typec: tcpci: Add get cc tcpci callback
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: typec: tcpci_rt1711h: Add compatible with rt1715
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v5 09/13] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v5 09/13] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v5 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] usb: dwc3: gadget: Adjust IRQ management during soft disconnect/connect
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: typec: tcpci_rt1711h: Add compatible with rt1715
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: option: adding support for OPPO R11 diag port
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 12/13] leds: flashlight: mt6370: Add MediaTek MT6370 flashlight support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 09/13] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 05/13] dt-bindings: backlight: Add MediaTek MT6370 backlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 04/13] dt-bindings: leds: Add MediaTek MT6370 flashlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 06/13] dt-bindings: mfd: Add MediaTek MT6370
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 03/13] dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 01/13] dt-bindings: usb: Add MediaTek MT6370 TCPC
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 02/13] dt-bindings: power: supply: Add MediaTek MT6370 Charger
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 00/13] Add MediaTek MT6370 PMIC support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH] USB: serial: option: adding support for OPPO R11 diag port
  • From: sdlyyxy <sdlyyxy@xxxxxxxxxxx>
• [PATCH 3/3] usb: typec: tcpci_rt1711h: Add compatible with rt1715
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH 2/3] usb: typec: tcpci: Add get cc tcpci callback
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH 1/3] dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH 0/3] usb: typec: tcpci_rt1711h: Add compatible with rt1715
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• Re: [for-next][PATCH 13/23] USB: mtu3: tracing: Use the new __vstring() helper
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2] usb: serial: qcserial: add EM9191 support
  • From: Frans Klaver <fransklaver@xxxxxxxxx>
• [PATCH] usb: serial: qcserial: add EM9191 support
  • From: Frans Klaver <fransklaver@xxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: usb: Add binding for TI USB8041 hub controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 3/3] usb: misc: onboard_usb_hub: Add TI USB8041 hub support
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: usb: Add binding for TI USB8041 hub controller
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH v2 2/3] usb: misc: onboard_usb_hub: Add reset-gpio support
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: option: adding support for OPPO R11 diag port
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: option: adding support for OPPO R11 diag port
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: option: adding support for OPPO R11 diag port
  • From: sdlyyxy <sdlyyxy@xxxxxxxxxxx>
• Re: [for-next][PATCH 13/23] USB: mtu3: tracing: Use the new __vstring() helper
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] phy: usb: Add USB2.0 phy driver for Sunplus SP7021
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 3/5] usb: dwc3: gadget: Adjust IRQ management during soft disconnect/connect
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v2 3/5] usb: dwc3: gadget: Adjust IRQ management during soft disconnect/connect
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v4 0/9] Type-C switch driver and Type-C framework updates
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/9] Type-C switch driver and Type-C framework updates
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• [for-next][PATCH 14/23] usb: musb: tracing: Use the new __vstring() helper
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [for-next][PATCH 13/23] USB: mtu3: tracing: Use the new __vstring() helper
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [for-next][PATCH 11/23] usb: chipidea: tracing: Use the new __vstring() helper
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [for-next][PATCH 12/23] xhci: tracing: Use the new __vstring() helper
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 08/13 v2] USB: mtu3: tracing: Use the new __vstring() helper
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>