Re: [PATCH 4/6] usb: chipidea: usbmisc_imx: Add prefix to register defines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 11, 2022 at 4:49 PM Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote:
>
> The driver is used for a broad range of i.MX SoCs and most of the
> register defines have a SoC/regname specific prefix to make clear
> in which context they should be used. Add such a prefix to the
> MX7D_USB_OTG_PHY_CFG1 defines as well.
>
> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>

Reviewed-by: Xu Yang <xu.yang_2@xxxxxxx>

Thanks,
Xu Yang

> ---
>  drivers/usb/chipidea/usbmisc_imx.c | 20 ++++++++++++--------
>  1 file changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
> index 95f2ba01c0df1..63de7d6fea427 100644
> --- a/drivers/usb/chipidea/usbmisc_imx.c
> +++ b/drivers/usb/chipidea/usbmisc_imx.c
> @@ -126,8 +126,8 @@
>  #define MX7D_USB_OTG_PHY_STATUS_CHRGDET                BIT(29)
>
>  #define MX7D_USB_OTG_PHY_CFG1          0x30
> -#define TXPREEMPAMPTUNE0               GENMASK(29, 28)
> -#define TXVREFTUNE0                    GENMASK(23, 20)
> +#define MX7D_USB_OTG_PHY_CFG1_TXPREEMPAMPTUNE0 GENMASK(29, 28)
> +#define MX7D_USB_OTG_PHY_CFG1_TXVREFTUNE0      GENMASK(23, 20)
>
>  #define MX6_USB_OTG_WAKEUP_BITS (MX6_BM_WAKEUP_ENABLE | MX6_BM_VBUS_WAKEUP | \
>                                  MX6_BM_ID_WAKEUP)
> @@ -659,15 +659,19 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
>                 /* PHY tuning for signal quality */
>                 reg = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
>                 if (data->emp_curr_control &&
> -                   FIELD_FIT(TXPREEMPAMPTUNE0, data->emp_curr_control)) {
> -                       reg &= ~TXPREEMPAMPTUNE0;
> -                       reg |= FIELD_PREP(TXPREEMPAMPTUNE0, data->emp_curr_control);
> +                   FIELD_FIT(MX7D_USB_OTG_PHY_CFG1_TXPREEMPAMPTUNE0,
> +                             data->emp_curr_control)) {
> +                       reg &= ~MX7D_USB_OTG_PHY_CFG1_TXPREEMPAMPTUNE0;
> +                       reg |= FIELD_PREP(MX7D_USB_OTG_PHY_CFG1_TXPREEMPAMPTUNE0,
> +                                         data->emp_curr_control);
>                 }
>
>                 if (data->dc_vol_level_adjust &&
> -                   FIELD_FIT(TXVREFTUNE0, data->dc_vol_level_adjust)) {
> -                       reg &= ~TXVREFTUNE0;
> -                       reg |= FIELD_PREP(TXVREFTUNE0, data->dc_vol_level_adjust);
> +                   FIELD_FIT(MX7D_USB_OTG_PHY_CFG1_TXVREFTUNE0,
> +                             data->dc_vol_level_adjust)) {
> +                       reg &= ~MX7D_USB_OTG_PHY_CFG1_TXVREFTUNE0;
> +                       reg |= FIELD_PREP(MX7D_USB_OTG_PHY_CFG1_TXVREFTUNE0,
> +                                         data->dc_vol_level_adjust);
>                 }
>
>                 writel(reg, usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
> --
> 2.30.2
>



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux