From: Arnd Bergmann <arnd@xxxxxxxx>
cns3xxx was marked as unused a while ago, and gets removed
entirely now.
Cc: Krzysztof Halasa <khalasa@xxxxxxx>
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
MAINTAINERS | 5 -
arch/arm/Kconfig | 2 -
arch/arm/Kconfig.debug | 10 -
arch/arm/Makefile | 1 -
arch/arm/configs/cns3420vb_defconfig | 63 ---
arch/arm/mach-cns3xxx/Kconfig | 21 -
arch/arm/mach-cns3xxx/Makefile | 6 -
arch/arm/mach-cns3xxx/cns3420vb.c | 252 ------------
arch/arm/mach-cns3xxx/cns3xxx.h | 593 ---------------------------
arch/arm/mach-cns3xxx/core.c | 410 ------------------
arch/arm/mach-cns3xxx/core.h | 32 --
arch/arm/mach-cns3xxx/devices.c | 108 -----
arch/arm/mach-cns3xxx/devices.h | 17 -
arch/arm/mach-cns3xxx/pcie.c | 290 -------------
arch/arm/mach-cns3xxx/pm.c | 120 ------
arch/arm/mach-cns3xxx/pm.h | 20 -
drivers/usb/host/Kconfig | 23 --
17 files changed, 1973 deletions(-)
delete mode 100644 arch/arm/configs/cns3420vb_defconfig
delete mode 100644 arch/arm/mach-cns3xxx/Kconfig
delete mode 100644 arch/arm/mach-cns3xxx/Makefile
delete mode 100644 arch/arm/mach-cns3xxx/cns3420vb.c
delete mode 100644 arch/arm/mach-cns3xxx/cns3xxx.h
delete mode 100644 arch/arm/mach-cns3xxx/core.c
delete mode 100644 arch/arm/mach-cns3xxx/core.h
delete mode 100644 arch/arm/mach-cns3xxx/devices.c
delete mode 100644 arch/arm/mach-cns3xxx/devices.h
delete mode 100644 arch/arm/mach-cns3xxx/pcie.c
delete mode 100644 arch/arm/mach-cns3xxx/pm.c
delete mode 100644 arch/arm/mach-cns3xxx/pm.h
diff --git a/MAINTAINERS b/MAINTAINERS
index aedb7c008dd6..57b74156df3a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1984,11 +1984,6 @@ F: arch/arm/boot/dts/ecx-*.dts*
F: arch/arm/boot/dts/highbank.dts
F: arch/arm/mach-highbank/
-ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
-M: Krzysztof Halasa <khalasa@xxxxxxx>
-S: Maintained
-F: arch/arm/mach-cns3xxx/
-
ARM/CAVIUM THUNDER NETWORK DRIVER
M: Sunil Goutham <sgoutham@xxxxxxxxxxx>
L: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx (moderated for non-subscribers)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a08c9d092a33..e58dab0303e6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -433,8 +433,6 @@ source "arch/arm/mach-berlin/Kconfig"
source "arch/arm/mach-clps711x/Kconfig"
-source "arch/arm/mach-cns3xxx/Kconfig"
-
source "arch/arm/mach-davinci/Kconfig"
source "arch/arm/mach-digicolor/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index c345775f035b..3b11e1d04625 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -307,14 +307,6 @@ choice
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
- config DEBUG_CNS3XXX
- bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
- depends on ARCH_CNS3XXX
- select DEBUG_UART_8250
- help
- Say Y here if you want the debug print routines to direct
- their output to the CNS3xxx UART0.
-
config DEBUG_DAVINCI_DA8XX_UART1
bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
depends on ARCH_DAVINCI_DA8XX
@@ -1685,7 +1677,6 @@ config DEBUG_UART_PHYS
DEBUG_S3C2410_UART1)
default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
DEBUG_S3C2410_UART2)
- default 0x78000000 if DEBUG_CNS3XXX
default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
@@ -1818,7 +1809,6 @@ config DEBUG_UART_VIRT
DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
default 0xfa71e000 if DEBUG_QCOM_UARTDM
- default 0xfb002000 if DEBUG_CNS3XXX
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
default 0xfb020000 if DEBUG_OMAP3UART3
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c846119c448f..beda22911feb 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -169,7 +169,6 @@ machine-$(CONFIG_ARCH_AXXIA) += axxia
machine-$(CONFIG_ARCH_BCM) += bcm
machine-$(CONFIG_ARCH_BERLIN) += berlin
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
-machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor
machine-$(CONFIG_ARCH_DOVE) += dove
diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig
deleted file mode 100644
index b3aab97c0728..000000000000
--- a/arch/arm/configs/cns3420vb_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_PERF_EVENTS is not set
-CONFIG_PROFILING=y
-CONFIG_ARCH_MULTI_V6=y
-CONFIG_ARCH_CNS3XXX=y
-CONFIG_MACH_CNS3420VB=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_IOSCHED_BFQ=m
-#CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_DEBUG_CNS3XXX=y
-CONFIG_AEABI=y
-# CONFIG_SWAP is not set
-CONFIG_SLAB=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=20000
-CONFIG_BLK_DEV_SD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ATA=y
-# CONFIG_SATA_PMP is not set
-# CONFIG_ATA_SFF is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FSCACHE=y
-CONFIG_TMPFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_CRC_CCITT=y
-CONFIG_DEBUG_FS=y
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
deleted file mode 100644
index 1f85deff2486..000000000000
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ /dev/null
@@ -1,21 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menuconfig ARCH_CNS3XXX
- bool "Cavium Networks CNS3XXX family"
- depends on ARCH_MULTI_V6
- depends on ATAGS && UNUSED_BOARD_FILES
- select ARM_GIC
- help
- Support for Cavium Networks CNS3XXX platform.
-
-if ARCH_CNS3XXX
-
-config MACH_CNS3420VB
- bool "Support for CNS3420 Validation Board"
- depends on ATAGS
- help
- Include support for the Cavium Networks CNS3420 MPCore Platform
- Baseboard.
- This is a platform with an on-board ARM11 MPCore and has support
- for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
-
-endif
diff --git a/arch/arm/mach-cns3xxx/Makefile b/arch/arm/mach-cns3xxx/Makefile
deleted file mode 100644
index 52ca6ed62304..000000000000
--- a/arch/arm/mach-cns3xxx/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o
-cns3xxx-y += core.o pm.o
-cns3xxx-$(CONFIG_ATAGS) += devices.o
-cns3xxx-$(CONFIG_PCI) += pcie.o
-cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
deleted file mode 100644
index 9099560aa462..000000000000
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ /dev/null
@@ -1,252 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Cavium Networks CNS3420 Validation Board
- *
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2008 ARM Limited
- * Copyright 2008 Cavium Networks
- * Scott Shu
- * Copyright 2010 MontaVista Software, LLC.
- * Anton Vorontsov <avorontsov@xxxxxxxxxx>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/compiler.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include "cns3xxx.h"
-#include "pm.h"
-#include "core.h"
-#include "devices.h"
-
-/*
- * NOR Flash
- */
-static struct mtd_partition cns3420_nor_partitions[] = {
- {
- .name = "uboot",
- .size = 0x00040000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .size = 0x004C0000,
- .offset = MTDPART_OFS_APPEND,
- }, {
- .name = "filesystem",
- .size = 0x7000000,
- .offset = MTDPART_OFS_APPEND,
- }, {
- .name = "filesystem2",
- .size = 0x0AE0000,
- .offset = MTDPART_OFS_APPEND,
- }, {
- .name = "ubootenv",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND,
- },
-};
-
-static struct physmap_flash_data cns3420_nor_pdata = {
- .width = 2,
- .parts = cns3420_nor_partitions,
- .nr_parts = ARRAY_SIZE(cns3420_nor_partitions),
-};
-
-static struct resource cns3420_nor_res = {
- .start = CNS3XXX_FLASH_BASE,
- .end = CNS3XXX_FLASH_BASE + SZ_128M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct platform_device cns3420_nor_pdev = {
- .name = "physmap-flash",
- .id = 0,
- .resource = &cns3420_nor_res,
- .num_resources = 1,
- .dev = {
- .platform_data = &cns3420_nor_pdata,
- },
-};
-
-/*
- * UART
- */
-static void __init cns3420_early_serial_setup(void)
-{
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- static struct uart_port cns3420_serial_port = {
- .membase = (void __iomem *)CNS3XXX_UART0_BASE_VIRT,
- .mapbase = CNS3XXX_UART0_BASE,
- .irq = IRQ_CNS3XXX_UART0,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
- .regshift = 2,
- .uartclk = 24000000,
- .line = 0,
- .type = PORT_16550A,
- .fifosize = 16,
- };
-
- early_serial_setup(&cns3420_serial_port);
-#endif
-}
-
-/*
- * USB
- */
-static struct resource cns3xxx_usb_ehci_resources[] = {
- [0] = {
- .start = CNS3XXX_USB_BASE,
- .end = CNS3XXX_USB_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_CNS3XXX_USB_EHCI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32);
-
-static int csn3xxx_usb_power_on(struct platform_device *pdev)
-{
- /*
- * EHCI and OHCI share the same clock and power,
- * resetting twice would cause the 1st controller been reset.
- * Therefore only do power up at the first up device, and
- * power down at the last down device.
- *
- * Set USB AHB INCR length to 16
- */
- if (atomic_inc_return(&usb_pwr_ref) == 1) {
- cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
- cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
- cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
- __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
- MISC_CHIP_CONFIG_REG);
- }
-
- return 0;
-}
-
-static void csn3xxx_usb_power_off(struct platform_device *pdev)
-{
- /*
- * EHCI and OHCI share the same clock and power,
- * resetting twice would cause the 1st controller been reset.
- * Therefore only do power up at the first up device, and
- * power down at the last down device.
- */
- if (atomic_dec_return(&usb_pwr_ref) == 0)
- cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-}
-
-static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = {
- .power_on = csn3xxx_usb_power_on,
- .power_off = csn3xxx_usb_power_off,
-};
-
-static struct platform_device cns3xxx_usb_ehci_device = {
- .name = "ehci-platform",
- .num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources),
- .resource = cns3xxx_usb_ehci_resources,
- .dev = {
- .dma_mask = &cns3xxx_usb_ehci_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &cns3xxx_usb_ehci_pdata,
- },
-};
-
-static struct resource cns3xxx_usb_ohci_resources[] = {
- [0] = {
- .start = CNS3XXX_USB_OHCI_BASE,
- .end = CNS3XXX_USB_OHCI_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_CNS3XXX_USB_OHCI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32);
-
-static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
- .num_ports = 1,
- .power_on = csn3xxx_usb_power_on,
- .power_off = csn3xxx_usb_power_off,
-};
-
-static struct platform_device cns3xxx_usb_ohci_device = {
- .name = "ohci-platform",
- .num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources),
- .resource = cns3xxx_usb_ohci_resources,
- .dev = {
- .dma_mask = &cns3xxx_usb_ohci_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &cns3xxx_usb_ohci_pdata,
- },
-};
-
-/*
- * Initialization
- */
-static struct platform_device *cns3420_pdevs[] __initdata = {
- &cns3420_nor_pdev,
- &cns3xxx_usb_ehci_device,
- &cns3xxx_usb_ohci_device,
-};
-
-static void __init cns3420_init(void)
-{
- cns3xxx_l2x0_init();
-
- platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
-
- cns3xxx_ahci_init();
- cns3xxx_sdhci_init();
-
- pm_power_off = cns3xxx_power_off;
-}
-
-static struct map_desc cns3420_io_desc[] __initdata = {
- {
- .virtual = CNS3XXX_UART0_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_UART0_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static void __init cns3420_map_io(void)
-{
- cns3xxx_map_io();
- iotable_init(cns3420_io_desc, ARRAY_SIZE(cns3420_io_desc));
-
- cns3420_early_serial_setup();
-}
-
-MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
- .atag_offset = 0x100,
- .map_io = cns3420_map_io,
- .init_irq = cns3xxx_init_irq,
- .init_time = cns3xxx_timer_init,
- .init_machine = cns3420_init,
- .init_late = cns3xxx_pcie_init_late,
- .restart = cns3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/cns3xxx.h b/arch/arm/mach-cns3xxx/cns3xxx.h
deleted file mode 100644
index cbb105a74f90..000000000000
--- a/arch/arm/mach-cns3xxx/cns3xxx.h
+++ /dev/null
@@ -1,593 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2008 Cavium Networks
- */
-
-#ifndef __MACH_BOARD_CNS3XXXH
-#define __MACH_BOARD_CNS3XXXH
-
-/*
- * Memory map
- */
-#define CNS3XXX_FLASH_BASE 0x10000000 /* Flash/SRAM Memory Bank 0 */
-#define CNS3XXX_FLASH_SIZE SZ_256M
-
-#define CNS3XXX_DDR2SDRAM_BASE 0x20000000 /* DDR2 SDRAM Memory */
-
-#define CNS3XXX_SPI_FLASH_BASE 0x60000000 /* SPI Serial Flash Memory */
-
-#define CNS3XXX_SWITCH_BASE 0x70000000 /* Switch and HNAT Control */
-
-#define CNS3XXX_PPE_BASE 0x70001000 /* HANT */
-
-#define CNS3XXX_EMBEDDED_SRAM_BASE 0x70002000 /* HANT Embedded SRAM */
-
-#define CNS3XXX_SSP_BASE 0x71000000 /* Synchronous Serial Port - SPI/PCM/I2C */
-
-#define CNS3XXX_DMC_BASE 0x72000000 /* DMC Control (DDR2 SDRAM) */
-
-#define CNS3XXX_SMC_BASE 0x73000000 /* SMC Control */
-
-#define SMC_MEMC_STATUS_OFFSET 0x000
-#define SMC_MEMIF_CFG_OFFSET 0x004
-#define SMC_MEMC_CFG_SET_OFFSET 0x008
-#define SMC_MEMC_CFG_CLR_OFFSET 0x00C
-#define SMC_DIRECT_CMD_OFFSET 0x010
-#define SMC_SET_CYCLES_OFFSET 0x014
-#define SMC_SET_OPMODE_OFFSET 0x018
-#define SMC_REFRESH_PERIOD_0_OFFSET 0x020
-#define SMC_REFRESH_PERIOD_1_OFFSET 0x024
-#define SMC_SRAM_CYCLES0_0_OFFSET 0x100
-#define SMC_NAND_CYCLES0_0_OFFSET 0x100
-#define SMC_OPMODE0_0_OFFSET 0x104
-#define SMC_SRAM_CYCLES0_1_OFFSET 0x120
-#define SMC_NAND_CYCLES0_1_OFFSET 0x120
-#define SMC_OPMODE0_1_OFFSET 0x124
-#define SMC_USER_STATUS_OFFSET 0x200
-#define SMC_USER_CONFIG_OFFSET 0x204
-#define SMC_ECC_STATUS_OFFSET 0x300
-#define SMC_ECC_MEMCFG_OFFSET 0x304
-#define SMC_ECC_MEMCOMMAND1_OFFSET 0x308
-#define SMC_ECC_MEMCOMMAND2_OFFSET 0x30C
-#define SMC_ECC_ADDR0_OFFSET 0x310
-#define SMC_ECC_ADDR1_OFFSET 0x314
-#define SMC_ECC_VALUE0_OFFSET 0x318
-#define SMC_ECC_VALUE1_OFFSET 0x31C
-#define SMC_ECC_VALUE2_OFFSET 0x320
-#define SMC_ECC_VALUE3_OFFSET 0x324
-#define SMC_PERIPH_ID_0_OFFSET 0xFE0
-#define SMC_PERIPH_ID_1_OFFSET 0xFE4
-#define SMC_PERIPH_ID_2_OFFSET 0xFE8
-#define SMC_PERIPH_ID_3_OFFSET 0xFEC
-#define SMC_PCELL_ID_0_OFFSET 0xFF0
-#define SMC_PCELL_ID_1_OFFSET 0xFF4
-#define SMC_PCELL_ID_2_OFFSET 0xFF8
-#define SMC_PCELL_ID_3_OFFSET 0xFFC
-
-#define CNS3XXX_GPIOA_BASE 0x74000000 /* GPIO port A */
-
-#define CNS3XXX_GPIOB_BASE 0x74800000 /* GPIO port B */
-
-#define CNS3XXX_RTC_BASE 0x75000000 /* Real Time Clock */
-
-#define RTC_SEC_OFFSET 0x00
-#define RTC_MIN_OFFSET 0x04
-#define RTC_HOUR_OFFSET 0x08
-#define RTC_DAY_OFFSET 0x0C
-#define RTC_SEC_ALM_OFFSET 0x10
-#define RTC_MIN_ALM_OFFSET 0x14
-#define RTC_HOUR_ALM_OFFSET 0x18
-#define RTC_REC_OFFSET 0x1C
-#define RTC_CTRL_OFFSET 0x20
-#define RTC_INTR_STS_OFFSET 0x34
-
-#define CNS3XXX_MISC_BASE 0x76000000 /* Misc Control */
-#define CNS3XXX_MISC_BASE_VIRT 0xFB000000 /* Misc Control */
-
-#define CNS3XXX_PM_BASE 0x77000000 /* Power Management Control */
-#define CNS3XXX_PM_BASE_VIRT 0xFB001000
-
-#define PM_CLK_GATE_OFFSET 0x00
-#define PM_SOFT_RST_OFFSET 0x04
-#define PM_HS_CFG_OFFSET 0x08
-#define PM_CACTIVE_STA_OFFSET 0x0C
-#define PM_PWR_STA_OFFSET 0x10
-#define PM_SYS_CLK_CTRL_OFFSET 0x14
-#define PM_PLL_LCD_I2S_CTRL_OFFSET 0x18
-#define PM_PLL_HM_PD_OFFSET 0x1C
-
-#define CNS3XXX_UART0_BASE 0x78000000 /* UART 0 */
-#define CNS3XXX_UART0_BASE_VIRT 0xFB002000
-
-#define CNS3XXX_UART1_BASE 0x78400000 /* UART 1 */
-
-#define CNS3XXX_UART2_BASE 0x78800000 /* UART 2 */
-
-#define CNS3XXX_DMAC_BASE 0x79000000 /* Generic DMA Control */
-
-#define CNS3XXX_CORESIGHT_BASE 0x7A000000 /* CoreSight */
-
-#define CNS3XXX_CRYPTO_BASE 0x7B000000 /* Crypto */
-
-#define CNS3XXX_I2S_BASE 0x7C000000 /* I2S */
-
-#define CNS3XXX_TIMER1_2_3_BASE 0x7C800000 /* Timer */
-#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFB003000
-
-#define TIMER1_COUNTER_OFFSET 0x00
-#define TIMER1_AUTO_RELOAD_OFFSET 0x04
-#define TIMER1_MATCH_V1_OFFSET 0x08
-#define TIMER1_MATCH_V2_OFFSET 0x0C
-
-#define TIMER2_COUNTER_OFFSET 0x10
-#define TIMER2_AUTO_RELOAD_OFFSET 0x14
-#define TIMER2_MATCH_V1_OFFSET 0x18
-#define TIMER2_MATCH_V2_OFFSET 0x1C
-
-#define TIMER1_2_CONTROL_OFFSET 0x30
-#define TIMER1_2_INTERRUPT_STATUS_OFFSET 0x34
-#define TIMER1_2_INTERRUPT_MASK_OFFSET 0x38
-
-#define TIMER_FREERUN_OFFSET 0x40
-#define TIMER_FREERUN_CONTROL_OFFSET 0x44
-
-#define CNS3XXX_HCIE_BASE 0x7D000000 /* HCIE Control */
-
-#define CNS3XXX_RAID_BASE 0x7E000000 /* RAID Control */
-
-#define CNS3XXX_AXI_IXC_BASE 0x7F000000 /* AXI IXC */
-
-#define CNS3XXX_CLCD_BASE 0x80000000 /* LCD Control */
-
-#define CNS3XXX_USBOTG_BASE 0x81000000 /* USB OTG Control */
-
-#define CNS3XXX_USB_BASE 0x82000000 /* USB Host Control */
-
-#define CNS3XXX_SATA2_BASE 0x83000000 /* SATA */
-#define CNS3XXX_SATA2_SIZE SZ_16M
-
-#define CNS3XXX_CAMERA_BASE 0x84000000 /* Camera Interface */
-
-#define CNS3XXX_SDIO_BASE 0x85000000 /* SDIO */
-
-#define CNS3XXX_I2S_TDM_BASE 0x86000000 /* I2S TDM */
-
-#define CNS3XXX_2DG_BASE 0x87000000 /* 2D Graphic Control */
-
-#define CNS3XXX_USB_OHCI_BASE 0x88000000 /* USB OHCI */
-
-#define CNS3XXX_L2C_BASE 0x92000000 /* L2 Cache Control */
-
-#define CNS3XXX_PCIE0_MEM_BASE 0xA0000000 /* PCIe Port 0 IO/Memory Space */
-
-#define CNS3XXX_PCIE0_HOST_BASE 0xAB000000 /* PCIe Port 0 RC Base */
-#define CNS3XXX_PCIE0_HOST_BASE_VIRT 0xE1000000
-
-#define CNS3XXX_PCIE0_IO_BASE 0xAC000000 /* PCIe Port 0 */
-
-#define CNS3XXX_PCIE0_CFG0_BASE 0xAD000000 /* PCIe Port 0 CFG Type 0 */
-#define CNS3XXX_PCIE0_CFG0_BASE_VIRT 0xE3000000
-
-#define CNS3XXX_PCIE0_CFG1_BASE 0xAE000000 /* PCIe Port 0 CFG Type 1 */
-#define CNS3XXX_PCIE0_CFG1_BASE_VIRT 0xE4000000
-
-#define CNS3XXX_PCIE0_MSG_BASE 0xAF000000 /* PCIe Port 0 Message Space */
-
-#define CNS3XXX_PCIE1_MEM_BASE 0xB0000000 /* PCIe Port 1 IO/Memory Space */
-
-#define CNS3XXX_PCIE1_HOST_BASE 0xBB000000 /* PCIe Port 1 RC Base */
-#define CNS3XXX_PCIE1_HOST_BASE_VIRT 0xE9000000
-
-#define CNS3XXX_PCIE1_IO_BASE 0xBC000000 /* PCIe Port 1 */
-
-#define CNS3XXX_PCIE1_CFG0_BASE 0xBD000000 /* PCIe Port 1 CFG Type 0 */
-#define CNS3XXX_PCIE1_CFG0_BASE_VIRT 0xEB000000
-
-#define CNS3XXX_PCIE1_CFG1_BASE 0xBE000000 /* PCIe Port 1 CFG Type 1 */
-#define CNS3XXX_PCIE1_CFG1_BASE_VIRT 0xEC000000
-
-#define CNS3XXX_PCIE1_MSG_BASE 0xBF000000 /* PCIe Port 1 Message Space */
-
-/*
- * Testchip peripheral and fpga gic regions
- */
-#define CNS3XXX_TC11MP_SCU_BASE 0x90000000 /* IRQ, Test chip */
-#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFB004000
-
-#define CNS3XXX_TC11MP_GIC_CPU_BASE 0x90000100 /* Test chip interrupt controller CPU interface */
-#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
-
-#define CNS3XXX_TC11MP_TWD_BASE 0x90000600
-#define CNS3XXX_TC11MP_TWD_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600)
-
-#define CNS3XXX_TC11MP_GIC_DIST_BASE 0x90001000 /* Test chip interrupt controller distributor */
-#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
-
-#define CNS3XXX_TC11MP_L220_BASE 0x92002000 /* L220 registers */
-
-/*
- * Misc block
- */
-#define MISC_MEM_MAP(offs) (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + (offs))
-
-#define MISC_MEMORY_REMAP_REG MISC_MEM_MAP(0x00)
-#define MISC_CHIP_CONFIG_REG MISC_MEM_MAP(0x04)
-#define MISC_DEBUG_PROBE_DATA_REG MISC_MEM_MAP(0x08)
-#define MISC_DEBUG_PROBE_SELECTION_REG MISC_MEM_MAP(0x0C)
-#define MISC_IO_PIN_FUNC_SELECTION_REG MISC_MEM_MAP(0x10)
-#define MISC_GPIOA_PIN_ENABLE_REG MISC_MEM_MAP(0x14)
-#define MISC_GPIOB_PIN_ENABLE_REG MISC_MEM_MAP(0x18)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A MISC_MEM_MAP(0x1C)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B MISC_MEM_MAP(0x20)
-#define MISC_GPIOA_15_0_PULL_CTRL_REG MISC_MEM_MAP(0x24)
-#define MISC_GPIOA_16_31_PULL_CTRL_REG MISC_MEM_MAP(0x28)
-#define MISC_GPIOB_15_0_PULL_CTRL_REG MISC_MEM_MAP(0x2C)
-#define MISC_GPIOB_16_31_PULL_CTRL_REG MISC_MEM_MAP(0x30)
-#define MISC_IO_PULL_CTRL_REG MISC_MEM_MAP(0x34)
-#define MISC_E_FUSE_31_0_REG MISC_MEM_MAP(0x40)
-#define MISC_E_FUSE_63_32_REG MISC_MEM_MAP(0x44)
-#define MISC_E_FUSE_95_64_REG MISC_MEM_MAP(0x48)
-#define MISC_E_FUSE_127_96_REG MISC_MEM_MAP(0x4C)
-#define MISC_SOFTWARE_TEST_1_REG MISC_MEM_MAP(0x50)
-#define MISC_SOFTWARE_TEST_2_REG MISC_MEM_MAP(0x54)
-
-#define MISC_SATA_POWER_MODE MISC_MEM_MAP(0x310)
-
-#define MISC_USB_CFG_REG MISC_MEM_MAP(0x800)
-#define MISC_USB_STS_REG MISC_MEM_MAP(0x804)
-#define MISC_USBPHY00_CFG_REG MISC_MEM_MAP(0x808)
-#define MISC_USBPHY01_CFG_REG MISC_MEM_MAP(0x80c)
-#define MISC_USBPHY10_CFG_REG MISC_MEM_MAP(0x810)
-#define MISC_USBPHY11_CFG_REG MISC_MEM_MAP(0x814)
-
-#define MISC_PCIEPHY_CMCTL(x) MISC_MEM_MAP(0x900 + (x) * 0x004)
-#define MISC_PCIEPHY_CTL(x) MISC_MEM_MAP(0x940 + (x) * 0x100)
-#define MISC_PCIE_AXIS_AWMISC(x) MISC_MEM_MAP(0x944 + (x) * 0x100)
-#define MISC_PCIE_AXIS_ARMISC(x) MISC_MEM_MAP(0x948 + (x) * 0x100)
-#define MISC_PCIE_AXIS_RMISC(x) MISC_MEM_MAP(0x94C + (x) * 0x100)
-#define MISC_PCIE_AXIS_BMISC(x) MISC_MEM_MAP(0x950 + (x) * 0x100)
-#define MISC_PCIE_AXIM_RMISC(x) MISC_MEM_MAP(0x954 + (x) * 0x100)
-#define MISC_PCIE_AXIM_BMISC(x) MISC_MEM_MAP(0x958 + (x) * 0x100)
-#define MISC_PCIE_CTRL(x) MISC_MEM_MAP(0x95C + (x) * 0x100)
-#define MISC_PCIE_PM_DEBUG(x) MISC_MEM_MAP(0x960 + (x) * 0x100)
-#define MISC_PCIE_RFC_DEBUG(x) MISC_MEM_MAP(0x964 + (x) * 0x100)
-#define MISC_PCIE_CXPL_DEBUGL(x) MISC_MEM_MAP(0x968 + (x) * 0x100)
-#define MISC_PCIE_CXPL_DEBUGH(x) MISC_MEM_MAP(0x96C + (x) * 0x100)
-#define MISC_PCIE_DIAG_DEBUGH(x) MISC_MEM_MAP(0x970 + (x) * 0x100)
-#define MISC_PCIE_W1CLR(x) MISC_MEM_MAP(0x974 + (x) * 0x100)
-#define MISC_PCIE_INT_MASK(x) MISC_MEM_MAP(0x978 + (x) * 0x100)
-#define MISC_PCIE_INT_STATUS(x) MISC_MEM_MAP(0x97C + (x) * 0x100)
-
-/*
- * Power management and clock control
- */
-#define PMU_MEM_MAP(offs) (void __iomem *)(CNS3XXX_PM_BASE_VIRT + (offs))
-
-#define PM_CLK_GATE_REG PMU_MEM_MAP(0x000)
-#define PM_SOFT_RST_REG PMU_MEM_MAP(0x004)
-#define PM_HS_CFG_REG PMU_MEM_MAP(0x008)
-#define PM_CACTIVE_STA_REG PMU_MEM_MAP(0x00C)
-#define PM_PWR_STA_REG PMU_MEM_MAP(0x010)
-#define PM_CLK_CTRL_REG PMU_MEM_MAP(0x014)
-#define PM_PLL_LCD_I2S_CTRL_REG PMU_MEM_MAP(0x018)
-#define PM_PLL_HM_PD_CTRL_REG PMU_MEM_MAP(0x01C)
-#define PM_REGULAT_CTRL_REG PMU_MEM_MAP(0x020)
-#define PM_WDT_CTRL_REG PMU_MEM_MAP(0x024)
-#define PM_WU_CTRL0_REG PMU_MEM_MAP(0x028)
-#define PM_WU_CTRL1_REG PMU_MEM_MAP(0x02C)
-#define PM_CSR_REG PMU_MEM_MAP(0x030)
-
-/* PM_CLK_GATE_REG */
-#define PM_CLK_GATE_REG_OFFSET_SDIO (25)
-#define PM_CLK_GATE_REG_OFFSET_GPU (24)
-#define PM_CLK_GATE_REG_OFFSET_CIM (23)
-#define PM_CLK_GATE_REG_OFFSET_LCDC (22)
-#define PM_CLK_GATE_REG_OFFSET_I2S (21)
-#define PM_CLK_GATE_REG_OFFSET_RAID (20)
-#define PM_CLK_GATE_REG_OFFSET_SATA (19)
-#define PM_CLK_GATE_REG_OFFSET_PCIE(x) (17 + (x))
-#define PM_CLK_GATE_REG_OFFSET_USB_HOST (16)
-#define PM_CLK_GATE_REG_OFFSET_USB_OTG (15)
-#define PM_CLK_GATE_REG_OFFSET_TIMER (14)
-#define PM_CLK_GATE_REG_OFFSET_CRYPTO (13)
-#define PM_CLK_GATE_REG_OFFSET_HCIE (12)
-#define PM_CLK_GATE_REG_OFFSET_SWITCH (11)
-#define PM_CLK_GATE_REG_OFFSET_GPIO (10)
-#define PM_CLK_GATE_REG_OFFSET_UART3 (9)
-#define PM_CLK_GATE_REG_OFFSET_UART2 (8)
-#define PM_CLK_GATE_REG_OFFSET_UART1 (7)
-#define PM_CLK_GATE_REG_OFFSET_RTC (5)
-#define PM_CLK_GATE_REG_OFFSET_GDMA (4)
-#define PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C (3)
-#define PM_CLK_GATE_REG_OFFSET_SMC_NFI (1)
-#define PM_CLK_GATE_REG_MASK (0x03FFFFBA)
-
-/* PM_SOFT_RST_REG */
-#define PM_SOFT_RST_REG_OFFST_WARM_RST_FLAG (31)
-#define PM_SOFT_RST_REG_OFFST_CPU1 (29)
-#define PM_SOFT_RST_REG_OFFST_CPU0 (28)
-#define PM_SOFT_RST_REG_OFFST_SDIO (25)
-#define PM_SOFT_RST_REG_OFFST_GPU (24)
-#define PM_SOFT_RST_REG_OFFST_CIM (23)
-#define PM_SOFT_RST_REG_OFFST_LCDC (22)
-#define PM_SOFT_RST_REG_OFFST_I2S (21)
-#define PM_SOFT_RST_REG_OFFST_RAID (20)
-#define PM_SOFT_RST_REG_OFFST_SATA (19)
-#define PM_SOFT_RST_REG_OFFST_PCIE(x) (17 + (x))
-#define PM_SOFT_RST_REG_OFFST_USB_HOST (16)
-#define PM_SOFT_RST_REG_OFFST_USB_OTG (15)
-#define PM_SOFT_RST_REG_OFFST_TIMER (14)
-#define PM_SOFT_RST_REG_OFFST_CRYPTO (13)
-#define PM_SOFT_RST_REG_OFFST_HCIE (12)
-#define PM_SOFT_RST_REG_OFFST_SWITCH (11)
-#define PM_SOFT_RST_REG_OFFST_GPIO (10)
-#define PM_SOFT_RST_REG_OFFST_UART3 (9)
-#define PM_SOFT_RST_REG_OFFST_UART2 (8)
-#define PM_SOFT_RST_REG_OFFST_UART1 (7)
-#define PM_SOFT_RST_REG_OFFST_RTC (5)
-#define PM_SOFT_RST_REG_OFFST_GDMA (4)
-#define PM_SOFT_RST_REG_OFFST_SPI_PCM_I2C (3)
-#define PM_SOFT_RST_REG_OFFST_DMC (2)
-#define PM_SOFT_RST_REG_OFFST_SMC_NFI (1)
-#define PM_SOFT_RST_REG_OFFST_GLOBAL (0)
-#define PM_SOFT_RST_REG_MASK (0xF3FFFFBF)
-
-/* PMHS_CFG_REG */
-#define PM_HS_CFG_REG_OFFSET_SDIO (25)
-#define PM_HS_CFG_REG_OFFSET_GPU (24)
-#define PM_HS_CFG_REG_OFFSET_CIM (23)
-#define PM_HS_CFG_REG_OFFSET_LCDC (22)
-#define PM_HS_CFG_REG_OFFSET_I2S (21)
-#define PM_HS_CFG_REG_OFFSET_RAID (20)
-#define PM_HS_CFG_REG_OFFSET_SATA (19)
-#define PM_HS_CFG_REG_OFFSET_PCIE1 (18)
-#define PM_HS_CFG_REG_OFFSET_PCIE0 (17)
-#define PM_HS_CFG_REG_OFFSET_USB_HOST (16)
-#define PM_HS_CFG_REG_OFFSET_USB_OTG (15)
-#define PM_HS_CFG_REG_OFFSET_TIMER (14)
-#define PM_HS_CFG_REG_OFFSET_CRYPTO (13)
-#define PM_HS_CFG_REG_OFFSET_HCIE (12)
-#define PM_HS_CFG_REG_OFFSET_SWITCH (11)
-#define PM_HS_CFG_REG_OFFSET_GPIO (10)
-#define PM_HS_CFG_REG_OFFSET_UART3 (9)
-#define PM_HS_CFG_REG_OFFSET_UART2 (8)
-#define PM_HS_CFG_REG_OFFSET_UART1 (7)
-#define PM_HS_CFG_REG_OFFSET_RTC (5)
-#define PM_HS_CFG_REG_OFFSET_GDMA (4)
-#define PM_HS_CFG_REG_OFFSET_SPI_PCM_I2S (3)
-#define PM_HS_CFG_REG_OFFSET_DMC (2)
-#define PM_HS_CFG_REG_OFFSET_SMC_NFI (1)
-#define PM_HS_CFG_REG_MASK (0x03FFFFBE)
-#define PM_HS_CFG_REG_MASK_SUPPORT (0x01100806)
-
-/* PM_CACTIVE_STA_REG */
-#define PM_CACTIVE_STA_REG_OFFSET_SDIO (25)
-#define PM_CACTIVE_STA_REG_OFFSET_GPU (24)
-#define PM_CACTIVE_STA_REG_OFFSET_CIM (23)
-#define PM_CACTIVE_STA_REG_OFFSET_LCDC (22)
-#define PM_CACTIVE_STA_REG_OFFSET_I2S (21)
-#define PM_CACTIVE_STA_REG_OFFSET_RAID (20)
-#define PM_CACTIVE_STA_REG_OFFSET_SATA (19)
-#define PM_CACTIVE_STA_REG_OFFSET_PCIE1 (18)
-#define PM_CACTIVE_STA_REG_OFFSET_PCIE0 (17)
-#define PM_CACTIVE_STA_REG_OFFSET_USB_HOST (16)
-#define PM_CACTIVE_STA_REG_OFFSET_USB_OTG (15)
-#define PM_CACTIVE_STA_REG_OFFSET_TIMER (14)
-#define PM_CACTIVE_STA_REG_OFFSET_CRYPTO (13)
-#define PM_CACTIVE_STA_REG_OFFSET_HCIE (12)
-#define PM_CACTIVE_STA_REG_OFFSET_SWITCH (11)
-#define PM_CACTIVE_STA_REG_OFFSET_GPIO (10)
-#define PM_CACTIVE_STA_REG_OFFSET_UART3 (9)
-#define PM_CACTIVE_STA_REG_OFFSET_UART2 (8)
-#define PM_CACTIVE_STA_REG_OFFSET_UART1 (7)
-#define PM_CACTIVE_STA_REG_OFFSET_RTC (5)
-#define PM_CACTIVE_STA_REG_OFFSET_GDMA (4)
-#define PM_CACTIVE_STA_REG_OFFSET_SPI_PCM_I2S (3)
-#define PM_CACTIVE_STA_REG_OFFSET_DMC (2)
-#define PM_CACTIVE_STA_REG_OFFSET_SMC_NFI (1)
-#define PM_CACTIVE_STA_REG_MASK (0x03FFFFBE)
-
-/* PM_PWR_STA_REG */
-#define PM_PWR_STA_REG_REG_OFFSET_SDIO (25)
-#define PM_PWR_STA_REG_REG_OFFSET_GPU (24)
-#define PM_PWR_STA_REG_REG_OFFSET_CIM (23)
-#define PM_PWR_STA_REG_REG_OFFSET_LCDC (22)
-#define PM_PWR_STA_REG_REG_OFFSET_I2S (21)
-#define PM_PWR_STA_REG_REG_OFFSET_RAID (20)
-#define PM_PWR_STA_REG_REG_OFFSET_SATA (19)
-#define PM_PWR_STA_REG_REG_OFFSET_PCIE1 (18)
-#define PM_PWR_STA_REG_REG_OFFSET_PCIE0 (17)
-#define PM_PWR_STA_REG_REG_OFFSET_USB_HOST (16)
-#define PM_PWR_STA_REG_REG_OFFSET_USB_OTG (15)
-#define PM_PWR_STA_REG_REG_OFFSET_TIMER (14)
-#define PM_PWR_STA_REG_REG_OFFSET_CRYPTO (13)
-#define PM_PWR_STA_REG_REG_OFFSET_HCIE (12)
-#define PM_PWR_STA_REG_REG_OFFSET_SWITCH (11)
-#define PM_PWR_STA_REG_REG_OFFSET_GPIO (10)
-#define PM_PWR_STA_REG_REG_OFFSET_UART3 (9)
-#define PM_PWR_STA_REG_REG_OFFSET_UART2 (8)
-#define PM_PWR_STA_REG_REG_OFFSET_UART1 (7)
-#define PM_PWR_STA_REG_REG_OFFSET_RTC (5)
-#define PM_PWR_STA_REG_REG_OFFSET_GDMA (4)
-#define PM_PWR_STA_REG_REG_OFFSET_SPI_PCM_I2S (3)
-#define PM_PWR_STA_REG_REG_OFFSET_DMC (2)
-#define PM_PWR_STA_REG_REG_OFFSET_SMC_NFI (1)
-#define PM_PWR_STA_REG_REG_MASK (0x03FFFFBE)
-
-/* PM_CLK_CTRL_REG */
-#define PM_CLK_CTRL_REG_OFFSET_I2S_MCLK (31)
-#define PM_CLK_CTRL_REG_OFFSET_DDR2_CHG_EN (30)
-#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF1_EN (29)
-#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF0_EN (28)
-#define PM_CLK_CTRL_REG_OFFSET_TIMER_SIM_MODE (27)
-#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_DIV (24)
-#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_SEL (22)
-#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_DIV (20)
-#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_SEL (16)
-#define PM_CLK_CTRL_REG_OFFSET_MDC_DIV (14)
-#define PM_CLK_CTRL_REG_OFFSET_CRYPTO_CLK_SEL (12)
-#define PM_CLK_CTRL_REG_OFFSET_CPU_PWR_MODE (9)
-#define PM_CLK_CTRL_REG_OFFSET_PLL_DDR2_SEL (7)
-#define PM_CLK_CTRL_REG_OFFSET_DIV_IMMEDIATE (6)
-#define PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV (4)
-#define PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL (0)
-
-#define PM_CPU_CLK_DIV(DIV) { \
- PM_CLK_CTRL_REG &= ~((0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
- PM_CLK_CTRL_REG |= (((DIV)&0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
-}
-
-#define PM_PLL_CPU_SEL(CPU) { \
- PM_CLK_CTRL_REG &= ~((0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
- PM_CLK_CTRL_REG |= (((CPU)&0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
-}
-
-/* PM_PLL_LCD_I2S_CTRL_REG */
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_MCLK_SMC_DIV (22)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_R_SEL (17)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_P (11)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_M (3)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_S (0)
-
-/* PM_PLL_HM_PD_CTRL_REG */
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1 (11)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0 (10)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2SCD (6)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2S (5)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_LCD (4)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB (3)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_RGMII (2)
-#define PM_PLL_HM_PD_CTRL_REG_MASK (0x00000C7C)
-
-/* PM_WDT_CTRL_REG */
-#define PM_WDT_CTRL_REG_OFFSET_RESET_CPU_ONLY (0)
-
-/* PM_CSR_REG - Clock Scaling Register*/
-#define PM_CSR_REG_OFFSET_CSR_EN (30)
-#define PM_CSR_REG_OFFSET_CSR_NUM (0)
-
-#define CNS3XXX_PWR_CLK_EN(BLOCK) (0x1<<PM_CLK_GATE_REG_OFFSET_##BLOCK)
-
-/* Software reset*/
-#define CNS3XXX_PWR_SOFTWARE_RST(BLOCK) (0x1<<PM_SOFT_RST_REG_OFFST_##BLOCK)
-
-/*
- * CNS3XXX support several power saving mode as following,
- * DFS, IDLE, HALT, DOZE, SLEEP, Hibernate
- */
-#define CNS3XXX_PWR_CPU_MODE_DFS (0)
-#define CNS3XXX_PWR_CPU_MODE_IDLE (1)
-#define CNS3XXX_PWR_CPU_MODE_HALT (2)
-#define CNS3XXX_PWR_CPU_MODE_DOZE (3)
-#define CNS3XXX_PWR_CPU_MODE_SLEEP (4)
-#define CNS3XXX_PWR_CPU_MODE_HIBERNATE (5)
-
-#define CNS3XXX_PWR_PLL(BLOCK) (0x1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_##BLOCK)
-#define CNS3XXX_PWR_PLL_ALL PM_PLL_HM_PD_CTRL_REG_MASK
-
-/* Change CPU frequency and divider */
-#define CNS3XXX_PWR_PLL_CPU_300MHZ (0)
-#define CNS3XXX_PWR_PLL_CPU_333MHZ (1)
-#define CNS3XXX_PWR_PLL_CPU_366MHZ (2)
-#define CNS3XXX_PWR_PLL_CPU_400MHZ (3)
-#define CNS3XXX_PWR_PLL_CPU_433MHZ (4)
-#define CNS3XXX_PWR_PLL_CPU_466MHZ (5)
-#define CNS3XXX_PWR_PLL_CPU_500MHZ (6)
-#define CNS3XXX_PWR_PLL_CPU_533MHZ (7)
-#define CNS3XXX_PWR_PLL_CPU_566MHZ (8)
-#define CNS3XXX_PWR_PLL_CPU_600MHZ (9)
-#define CNS3XXX_PWR_PLL_CPU_633MHZ (10)
-#define CNS3XXX_PWR_PLL_CPU_666MHZ (11)
-#define CNS3XXX_PWR_PLL_CPU_700MHZ (12)
-
-#define CNS3XXX_PWR_CPU_CLK_DIV_BY1 (0)
-#define CNS3XXX_PWR_CPU_CLK_DIV_BY2 (1)
-#define CNS3XXX_PWR_CPU_CLK_DIV_BY4 (2)
-
-/* Change DDR2 frequency */
-#define CNS3XXX_PWR_PLL_DDR2_200MHZ (0)
-#define CNS3XXX_PWR_PLL_DDR2_266MHZ (1)
-#define CNS3XXX_PWR_PLL_DDR2_333MHZ (2)
-#define CNS3XXX_PWR_PLL_DDR2_400MHZ (3)
-
-void cns3xxx_pwr_soft_rst(unsigned int block);
-void cns3xxx_pwr_clk_en(unsigned int block);
-int cns3xxx_cpu_clock(void);
-
-/*
- * ARM11 MPCore interrupt sources (primary GIC)
- */
-#define IRQ_TC11MP_GIC_START 32
-
-#define IRQ_CNS3XXX_PMU (IRQ_TC11MP_GIC_START + 0)
-#define IRQ_CNS3XXX_SDIO (IRQ_TC11MP_GIC_START + 1)
-#define IRQ_CNS3XXX_L2CC (IRQ_TC11MP_GIC_START + 2)
-#define IRQ_CNS3XXX_RTC (IRQ_TC11MP_GIC_START + 3)
-#define IRQ_CNS3XXX_I2S (IRQ_TC11MP_GIC_START + 4)
-#define IRQ_CNS3XXX_PCM (IRQ_TC11MP_GIC_START + 5)
-#define IRQ_CNS3XXX_SPI (IRQ_TC11MP_GIC_START + 6)
-#define IRQ_CNS3XXX_I2C (IRQ_TC11MP_GIC_START + 7)
-#define IRQ_CNS3XXX_CIM (IRQ_TC11MP_GIC_START + 8)
-#define IRQ_CNS3XXX_GPU (IRQ_TC11MP_GIC_START + 9)
-#define IRQ_CNS3XXX_LCD (IRQ_TC11MP_GIC_START + 10)
-#define IRQ_CNS3XXX_GPIOA (IRQ_TC11MP_GIC_START + 11)
-#define IRQ_CNS3XXX_GPIOB (IRQ_TC11MP_GIC_START + 12)
-#define IRQ_CNS3XXX_UART0 (IRQ_TC11MP_GIC_START + 13)
-#define IRQ_CNS3XXX_UART1 (IRQ_TC11MP_GIC_START + 14)
-#define IRQ_CNS3XXX_UART2 (IRQ_TC11MP_GIC_START + 15)
-#define IRQ_CNS3XXX_ARM11 (IRQ_TC11MP_GIC_START + 16)
-
-#define IRQ_CNS3XXX_SW_STATUS (IRQ_TC11MP_GIC_START + 17)
-#define IRQ_CNS3XXX_SW_R0TXC (IRQ_TC11MP_GIC_START + 18)
-#define IRQ_CNS3XXX_SW_R0RXC (IRQ_TC11MP_GIC_START + 19)
-#define IRQ_CNS3XXX_SW_R0QE (IRQ_TC11MP_GIC_START + 20)
-#define IRQ_CNS3XXX_SW_R0QF (IRQ_TC11MP_GIC_START + 21)
-#define IRQ_CNS3XXX_SW_R1TXC (IRQ_TC11MP_GIC_START + 22)
-#define IRQ_CNS3XXX_SW_R1RXC (IRQ_TC11MP_GIC_START + 23)
-#define IRQ_CNS3XXX_SW_R1QE (IRQ_TC11MP_GIC_START + 24)
-#define IRQ_CNS3XXX_SW_R1QF (IRQ_TC11MP_GIC_START + 25)
-#define IRQ_CNS3XXX_SW_PPE (IRQ_TC11MP_GIC_START + 26)
-
-#define IRQ_CNS3XXX_CRYPTO (IRQ_TC11MP_GIC_START + 27)
-#define IRQ_CNS3XXX_HCIE (IRQ_TC11MP_GIC_START + 28)
-#define IRQ_CNS3XXX_PCIE0_DEVICE (IRQ_TC11MP_GIC_START + 29)
-#define IRQ_CNS3XXX_PCIE1_DEVICE (IRQ_TC11MP_GIC_START + 30)
-#define IRQ_CNS3XXX_USB_OTG (IRQ_TC11MP_GIC_START + 31)
-#define IRQ_CNS3XXX_USB_EHCI (IRQ_TC11MP_GIC_START + 32)
-#define IRQ_CNS3XXX_SATA (IRQ_TC11MP_GIC_START + 33)
-#define IRQ_CNS3XXX_RAID (IRQ_TC11MP_GIC_START + 34)
-#define IRQ_CNS3XXX_SMC (IRQ_TC11MP_GIC_START + 35)
-
-#define IRQ_CNS3XXX_DMAC_ABORT (IRQ_TC11MP_GIC_START + 36)
-#define IRQ_CNS3XXX_DMAC0 (IRQ_TC11MP_GIC_START + 37)
-#define IRQ_CNS3XXX_DMAC1 (IRQ_TC11MP_GIC_START + 38)
-#define IRQ_CNS3XXX_DMAC2 (IRQ_TC11MP_GIC_START + 39)
-#define IRQ_CNS3XXX_DMAC3 (IRQ_TC11MP_GIC_START + 40)
-#define IRQ_CNS3XXX_DMAC4 (IRQ_TC11MP_GIC_START + 41)
-#define IRQ_CNS3XXX_DMAC5 (IRQ_TC11MP_GIC_START + 42)
-#define IRQ_CNS3XXX_DMAC6 (IRQ_TC11MP_GIC_START + 43)
-#define IRQ_CNS3XXX_DMAC7 (IRQ_TC11MP_GIC_START + 44)
-#define IRQ_CNS3XXX_DMAC8 (IRQ_TC11MP_GIC_START + 45)
-#define IRQ_CNS3XXX_DMAC9 (IRQ_TC11MP_GIC_START + 46)
-#define IRQ_CNS3XXX_DMAC10 (IRQ_TC11MP_GIC_START + 47)
-#define IRQ_CNS3XXX_DMAC11 (IRQ_TC11MP_GIC_START + 48)
-#define IRQ_CNS3XXX_DMAC12 (IRQ_TC11MP_GIC_START + 49)
-#define IRQ_CNS3XXX_DMAC13 (IRQ_TC11MP_GIC_START + 50)
-#define IRQ_CNS3XXX_DMAC14 (IRQ_TC11MP_GIC_START + 51)
-#define IRQ_CNS3XXX_DMAC15 (IRQ_TC11MP_GIC_START + 52)
-#define IRQ_CNS3XXX_DMAC16 (IRQ_TC11MP_GIC_START + 53)
-#define IRQ_CNS3XXX_DMAC17 (IRQ_TC11MP_GIC_START + 54)
-
-#define IRQ_CNS3XXX_PCIE0_RC (IRQ_TC11MP_GIC_START + 55)
-#define IRQ_CNS3XXX_PCIE1_RC (IRQ_TC11MP_GIC_START + 56)
-#define IRQ_CNS3XXX_TIMER0 (IRQ_TC11MP_GIC_START + 57)
-#define IRQ_CNS3XXX_TIMER1 (IRQ_TC11MP_GIC_START + 58)
-#define IRQ_CNS3XXX_USB_OHCI (IRQ_TC11MP_GIC_START + 59)
-#define IRQ_CNS3XXX_TIMER2 (IRQ_TC11MP_GIC_START + 60)
-#define IRQ_CNS3XXX_EXTERNAL_PIN0 (IRQ_TC11MP_GIC_START + 61)
-#define IRQ_CNS3XXX_EXTERNAL_PIN1 (IRQ_TC11MP_GIC_START + 62)
-#define IRQ_CNS3XXX_EXTERNAL_PIN2 (IRQ_TC11MP_GIC_START + 63)
-
-#define NR_IRQS_CNS3XXX (IRQ_TC11MP_GIC_START + 64)
-
-#endif /* __MACH_BOARD_CNS3XXX_H */
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
deleted file mode 100644
index 3fc4ec830e3a..000000000000
--- a/arch/arm/mach-cns3xxx/core.c
+++ /dev/null
@@ -1,410 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 1999 - 2003 ARM Limited
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2008 Cavium Networks
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-#include <asm/hardware/cache-l2x0.h>
-#include "cns3xxx.h"
-#include "core.h"
-#include "pm.h"
-
-static struct map_desc cns3xxx_io_desc[] __initdata = {
- {
- .virtual = CNS3XXX_TC11MP_SCU_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
- .length = SZ_8K,
- .type = MT_DEVICE,
- }, {
- .virtual = CNS3XXX_TIMER1_2_3_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_TIMER1_2_3_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = CNS3XXX_MISC_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_MISC_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = CNS3XXX_PM_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_PM_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
-#ifdef CONFIG_PCI
- }, {
- .virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = CNS3XXX_PCIE0_CFG0_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE),
- .length = SZ_64K, /* really 4 KiB at offset 32 KiB */
- .type = MT_DEVICE,
- }, {
- .virtual = CNS3XXX_PCIE0_CFG1_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE),
- .length = SZ_16M,
- .type = MT_DEVICE,
- }, {
- .virtual = CNS3XXX_PCIE1_HOST_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = CNS3XXX_PCIE1_CFG0_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE),
- .length = SZ_64K, /* really 4 KiB at offset 32 KiB */
- .type = MT_DEVICE,
- }, {
- .virtual = CNS3XXX_PCIE1_CFG1_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
- .length = SZ_16M,
- .type = MT_DEVICE,
-#endif
- },
-};
-
-void __init cns3xxx_map_io(void)
-{
- iotable_init(cns3xxx_io_desc, ARRAY_SIZE(cns3xxx_io_desc));
-}
-
-/* used by entry-macro.S */
-void __init cns3xxx_init_irq(void)
-{
- gic_init(IOMEM(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT),
- IOMEM(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT));
-}
-
-void cns3xxx_power_off(void)
-{
- u32 __iomem *pm_base = IOMEM(CNS3XXX_PM_BASE_VIRT);
- u32 clkctrl;
-
- printk(KERN_INFO "powering system down...\n");
-
- clkctrl = readl(pm_base + PM_SYS_CLK_CTRL_OFFSET);
- clkctrl &= 0xfffff1ff;
- clkctrl |= (0x5 << 9); /* Hibernate */
- writel(clkctrl, pm_base + PM_SYS_CLK_CTRL_OFFSET);
-
-}
-
-/*
- * Timer
- */
-static void __iomem *cns3xxx_tmr1;
-
-static int cns3xxx_shutdown(struct clock_event_device *clk)
-{
- writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
- return 0;
-}
-
-static int cns3xxx_set_oneshot(struct clock_event_device *clk)
-{
- unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
- /* period set, and timer enabled in 'next_event' hook */
- ctrl |= (1 << 2) | (1 << 9);
- writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
- return 0;
-}
-
-static int cns3xxx_set_periodic(struct clock_event_device *clk)
-{
- unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
- int pclk = cns3xxx_cpu_clock() / 8;
- int reload;
-
- reload = pclk * 20 / (3 * HZ) * 0x25000;
- writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
- ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
- writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
- return 0;
-}
-
-static int cns3xxx_timer_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
- writel(evt, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
- writel(ctrl | (1 << 0), cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
- return 0;
-}
-
-static struct clock_event_device cns3xxx_tmr1_clockevent = {
- .name = "cns3xxx timer1",
- .features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT,
- .set_state_shutdown = cns3xxx_shutdown,
- .set_state_periodic = cns3xxx_set_periodic,
- .set_state_oneshot = cns3xxx_set_oneshot,
- .tick_resume = cns3xxx_shutdown,
- .set_next_event = cns3xxx_timer_set_next_event,
- .rating = 350,
- .cpumask = cpu_all_mask,
-};
-
-static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
-{
- cns3xxx_tmr1_clockevent.irq = timer_irq;
- clockevents_config_and_register(&cns3xxx_tmr1_clockevent,
- (cns3xxx_cpu_clock() >> 3) * 1000000,
- 0xf, 0xffffffff);
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &cns3xxx_tmr1_clockevent;
- u32 __iomem *stat = cns3xxx_tmr1 + TIMER1_2_INTERRUPT_STATUS_OFFSET;
- u32 val;
-
- /* Clear the interrupt */
- val = readl(stat);
- writel(val & ~(1 << 2), stat);
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-/*
- * Set up the clock source and clock events devices
- */
-static void __init __cns3xxx_timer_init(unsigned int timer_irq)
-{
- u32 val;
- u32 irq_mask;
-
- /*
- * Initialise to a known state (all timers off)
- */
-
- /* disable timer1 and timer2 */
- writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
- /* stop free running timer3 */
- writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
-
- /* timer1 */
- writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
- writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
-
- writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET);
- writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET);
-
- /* mask irq, non-mask timer1 overflow */
- irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
- irq_mask &= ~(1 << 2);
- irq_mask |= 0x03;
- writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-
- /* down counter */
- val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
- val |= (1 << 9);
- writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
- /* timer2 */
- writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET);
- writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET);
-
- /* mask irq */
- irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
- irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5));
- writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-
- /* down counter */
- val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
- val |= (1 << 10);
- writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
- /* Make irqs happen for the system timer */
- if (request_irq(timer_irq, cns3xxx_timer_interrupt,
- IRQF_TIMER | IRQF_IRQPOLL, "timer", NULL))
- pr_err("Failed to request irq %d (timer)\n", timer_irq);
-
- cns3xxx_clockevents_init(timer_irq);
-}
-
-void __init cns3xxx_timer_init(void)
-{
- cns3xxx_tmr1 = IOMEM(CNS3XXX_TIMER1_2_3_BASE_VIRT);
-
- __cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0);
-}
-
-#ifdef CONFIG_CACHE_L2X0
-
-void __init cns3xxx_l2x0_init(void)
-{
- void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
- u32 val;
-
- if (WARN_ON(!base))
- return;
-
- /*
- * Tag RAM Control register
- *
- * bit[10:8] - 1 cycle of write accesses latency
- * bit[6:4] - 1 cycle of read accesses latency
- * bit[3:0] - 1 cycle of setup latency
- *
- * 1 cycle of latency for setup, read and write accesses
- */
- val = readl(base + L310_TAG_LATENCY_CTRL);
- val &= 0xfffff888;
- writel(val, base + L310_TAG_LATENCY_CTRL);
-
- /*
- * Data RAM Control register
- *
- * bit[10:8] - 1 cycles of write accesses latency
- * bit[6:4] - 1 cycles of read accesses latency
- * bit[3:0] - 1 cycle of setup latency
- *
- * 1 cycle of latency for setup, read and write accesses
- */
- val = readl(base + L310_DATA_LATENCY_CTRL);
- val &= 0xfffff888;
- writel(val, base + L310_DATA_LATENCY_CTRL);
-
- /* 32 KiB, 8-way, parity disable */
- l2x0_init(base, 0x00500000, 0xfe0f0fff);
-}
-
-#endif /* CONFIG_CACHE_L2X0 */
-
-static int csn3xxx_usb_power_on(struct platform_device *pdev)
-{
- /*
- * EHCI and OHCI share the same clock and power,
- * resetting twice would cause the 1st controller been reset.
- * Therefore only do power up at the first up device, and
- * power down at the last down device.
- *
- * Set USB AHB INCR length to 16
- */
- if (atomic_inc_return(&usb_pwr_ref) == 1) {
- cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
- cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
- cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
- __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
- MISC_CHIP_CONFIG_REG);
- }
-
- return 0;
-}
-
-static void csn3xxx_usb_power_off(struct platform_device *pdev)
-{
- /*
- * EHCI and OHCI share the same clock and power,
- * resetting twice would cause the 1st controller been reset.
- * Therefore only do power up at the first up device, and
- * power down at the last down device.
- */
- if (atomic_dec_return(&usb_pwr_ref) == 0)
- cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-}
-
-static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = {
- .power_on = csn3xxx_usb_power_on,
- .power_off = csn3xxx_usb_power_off,
-};
-
-static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
- .num_ports = 1,
- .power_on = csn3xxx_usb_power_on,
- .power_off = csn3xxx_usb_power_off,
-};
-
-static const struct of_dev_auxdata cns3xxx_auxdata[] __initconst = {
- { "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata },
- { "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata },
- { "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL },
- { "cavium,cns3420-sdhci", CNS3XXX_SDIO_BASE, "ahci", NULL },
- {},
-};
-
-static void __init cns3xxx_init(void)
-{
- struct device_node *dn;
-
- cns3xxx_l2x0_init();
-
- dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-ahci");
- if (of_device_is_available(dn)) {
- u32 tmp;
-
- tmp = __raw_readl(MISC_SATA_POWER_MODE);
- tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
- tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
- __raw_writel(tmp, MISC_SATA_POWER_MODE);
-
- /* Enable SATA PHY */
- cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
- cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
-
- /* Enable SATA Clock */
- cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
-
- /* De-Asscer SATA Reset */
- cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
- }
- of_node_put(dn);
-
- dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci");
- if (of_device_is_available(dn)) {
- u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014);
- u32 gpioa_pins = __raw_readl(gpioa);
-
- /* MMC/SD pins share with GPIOA */
- gpioa_pins |= 0x1fff0004;
- __raw_writel(gpioa_pins, gpioa);
-
- cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
- cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
- }
- of_node_put(dn);
-
- pm_power_off = cns3xxx_power_off;
-
- of_platform_default_populate(NULL, cns3xxx_auxdata, NULL);
-}
-
-static const char *const cns3xxx_dt_compat[] __initconst = {
- "cavium,cns3410",
- "cavium,cns3420",
- NULL,
-};
-
-DT_MACHINE_START(CNS3XXX_DT, "Cavium Networks CNS3xxx")
- .dt_compat = cns3xxx_dt_compat,
- .map_io = cns3xxx_map_io,
- .init_irq = cns3xxx_init_irq,
- .init_time = cns3xxx_timer_init,
- .init_machine = cns3xxx_init,
- .init_late = cns3xxx_pcie_init_late,
- .restart = cns3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
deleted file mode 100644
index a96eabaea301..000000000000
--- a/arch/arm/mach-cns3xxx/core.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2004 ARM Limited
- * Copyright 2008 Cavium Networks
- */
-
-#ifndef __CNS3XXX_CORE_H
-#define __CNS3XXX_CORE_H
-
-#include <linux/reboot.h>
-
-extern void cns3xxx_timer_init(void);
-
-#ifdef CONFIG_CACHE_L2X0
-void __init cns3xxx_l2x0_init(void);
-#else
-static inline void cns3xxx_l2x0_init(void) {}
-#endif /* CONFIG_CACHE_L2X0 */
-
-#ifdef CONFIG_PCI
-extern void __init cns3xxx_pcie_init_late(void);
-#else
-static inline void __init cns3xxx_pcie_init_late(void) {}
-#endif
-
-void __init cns3xxx_map_io(void);
-void __init cns3xxx_init_irq(void);
-void cns3xxx_power_off(void);
-void cns3xxx_restart(enum reboot_mode, const char *);
-
-#endif /* __CNS3XXX_CORE_H */
diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c
deleted file mode 100644
index 0f1ba8a0377d..000000000000
--- a/arch/arm/mach-cns3xxx/devices.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * CNS3xxx common devices
- *
- * Copyright 2008 Cavium Networks
- * Scott Shu
- * Copyright 2010 MontaVista Software, LLC.
- * Anton Vorontsov <avorontsov@xxxxxxxxxx>
- */
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/compiler.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include "cns3xxx.h"
-#include "pm.h"
-#include "core.h"
-#include "devices.h"
-
-/*
- * AHCI
- */
-static struct resource cns3xxx_ahci_resource[] = {
- [0] = {
- .start = CNS3XXX_SATA2_BASE,
- .end = CNS3XXX_SATA2_BASE + CNS3XXX_SATA2_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_CNS3XXX_SATA,
- .end = IRQ_CNS3XXX_SATA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 cns3xxx_ahci_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device cns3xxx_ahci_pdev = {
- .name = "ahci",
- .id = 0,
- .resource = cns3xxx_ahci_resource,
- .num_resources = ARRAY_SIZE(cns3xxx_ahci_resource),
- .dev = {
- .dma_mask = &cns3xxx_ahci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init cns3xxx_ahci_init(void)
-{
- u32 tmp;
-
- tmp = __raw_readl(MISC_SATA_POWER_MODE);
- tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
- tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
- __raw_writel(tmp, MISC_SATA_POWER_MODE);
-
- /* Enable SATA PHY */
- cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
- cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
-
- /* Enable SATA Clock */
- cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
-
- /* De-Asscer SATA Reset */
- cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
-
- platform_device_register(&cns3xxx_ahci_pdev);
-}
-
-/*
- * SDHCI
- */
-static struct resource cns3xxx_sdhci_resources[] = {
- [0] = {
- .start = CNS3XXX_SDIO_BASE,
- .end = CNS3XXX_SDIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_CNS3XXX_SDIO,
- .end = IRQ_CNS3XXX_SDIO,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cns3xxx_sdhci_pdev = {
- .name = "sdhci-cns3xxx",
- .id = 0,
- .num_resources = ARRAY_SIZE(cns3xxx_sdhci_resources),
- .resource = cns3xxx_sdhci_resources,
-};
-
-void __init cns3xxx_sdhci_init(void)
-{
- u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014);
- u32 gpioa_pins = __raw_readl(gpioa);
-
- /* MMC/SD pins share with GPIOA */
- gpioa_pins |= 0x1fff0004;
- __raw_writel(gpioa_pins, gpioa);
-
- cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
- cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
-
- platform_device_register(&cns3xxx_sdhci_pdev);
-}
diff --git a/arch/arm/mach-cns3xxx/devices.h b/arch/arm/mach-cns3xxx/devices.h
deleted file mode 100644
index ab16530d0116..000000000000
--- a/arch/arm/mach-cns3xxx/devices.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * CNS3xxx common devices
- *
- * Copyright 2008 Cavium Networks
- * Scott Shu
- * Copyright 2010 MontaVista Software, LLC.
- * Anton Vorontsov <avorontsov@xxxxxxxxxx>
- */
-
-#ifndef __CNS3XXX_DEVICES_H_
-#define __CNS3XXX_DEVICES_H_
-
-void __init cns3xxx_ahci_init(void);
-void __init cns3xxx_sdhci_init(void);
-
-#endif /* __CNS3XXX_DEVICES_H_ */
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
deleted file mode 100644
index e92fbd679dfb..000000000000
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ /dev/null
@@ -1,290 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * PCI-E support for CNS3xxx
- *
- * Copyright 2008 Cavium Networks
- * Richard Liu <richard.liu@xxxxxxxxxxxxxxxxxx>
- * Copyright 2010 MontaVista Software, LLC.
- * Anton Vorontsov <avorontsov@xxxxxxxxxx>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/bug.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <asm/mach/map.h>
-#include "cns3xxx.h"
-#include "core.h"
-
-struct cns3xxx_pcie {
- void __iomem *host_regs; /* PCI config registers for host bridge */
- void __iomem *cfg0_regs; /* PCI Type 0 config registers */
- void __iomem *cfg1_regs; /* PCI Type 1 config registers */
- unsigned int irqs[2];
- struct resource res_io;
- struct resource res_mem;
- int port;
- bool linked;
-};
-
-static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata)
-{
- struct pci_sys_data *root = sysdata;
-
- return root->private_data;
-}
-
-static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev)
-{
- return sysdata_to_cnspci(dev->sysdata);
-}
-
-static struct cns3xxx_pcie *pbus_to_cnspci(struct pci_bus *bus)
-{
- return sysdata_to_cnspci(bus->sysdata);
-}
-
-static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus,
- unsigned int devfn, int where)
-{
- struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
- int busno = bus->number;
- int slot = PCI_SLOT(devfn);
- void __iomem *base;
-
- /* If there is no link, just show the CNS PCI bridge. */
- if (!cnspci->linked && busno > 0)
- return NULL;
-
- /*
- * The CNS PCI bridge doesn't fit into the PCI hierarchy, though
- * we still want to access it.
- * We place the host bridge on bus 0, and the directly connected
- * device on bus 1, slot 0.
- */
- if (busno == 0) { /* internal PCIe bus, host bridge device */
- if (devfn == 0) /* device# and function# are ignored by hw */
- base = cnspci->host_regs;
- else
- return NULL; /* no such device */
-
- } else if (busno == 1) { /* directly connected PCIe device */
- if (slot == 0) /* device# is ignored by hw */
- base = cnspci->cfg0_regs;
- else
- return NULL; /* no such device */
- } else /* remote PCI bus */
- base = cnspci->cfg1_regs + ((busno & 0xf) << 20);
-
- return base + where + (devfn << 12);
-}
-
-static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- int ret;
- u32 mask = (0x1ull << (size * 8)) - 1;
- int shift = (where % 4) * 8;
-
- ret = pci_generic_config_read(bus, devfn, where, size, val);
-
- if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn &&
- (where & 0xffc) == PCI_CLASS_REVISION)
- /*
- * RC's class is 0xb, but Linux PCI driver needs 0x604
- * for a PCIe bridge. So we must fixup the class code
- * to 0x604 here.
- */
- *val = ((((*val << shift) & 0xff) | (0x604 << 16)) >> shift) & mask;
-
- return ret;
-}
-
-static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys)
-{
- struct cns3xxx_pcie *cnspci = sysdata_to_cnspci(sys);
- struct resource *res_io = &cnspci->res_io;
- struct resource *res_mem = &cnspci->res_mem;
-
- BUG_ON(request_resource(&iomem_resource, res_io) ||
- request_resource(&iomem_resource, res_mem));
-
- pci_add_resource_offset(&sys->resources, res_io, sys->io_offset);
- pci_add_resource_offset(&sys->resources, res_mem, sys->mem_offset);
-
- return 1;
-}
-
-static struct pci_ops cns3xxx_pcie_ops = {
- .map_bus = cns3xxx_pci_map_bus,
- .read = cns3xxx_pci_read_config,
- .write = pci_generic_config_write,
-};
-
-static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
- int irq = cnspci->irqs[!!dev->bus->number];
-
- pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n",
- pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn),
- PCI_FUNC(dev->devfn), slot, pin, irq);
-
- return irq;
-}
-
-static struct cns3xxx_pcie cns3xxx_pcie[] = {
- [0] = {
- .host_regs = (void __iomem *)CNS3XXX_PCIE0_HOST_BASE_VIRT,
- .cfg0_regs = (void __iomem *)CNS3XXX_PCIE0_CFG0_BASE_VIRT,
- .cfg1_regs = (void __iomem *)CNS3XXX_PCIE0_CFG1_BASE_VIRT,
- .res_io = {
- .name = "PCIe0 I/O space",
- .start = CNS3XXX_PCIE0_IO_BASE,
- .end = CNS3XXX_PCIE0_CFG0_BASE - 1, /* 16 MiB */
- .flags = IORESOURCE_IO,
- },
- .res_mem = {
- .name = "PCIe0 non-prefetchable",
- .start = CNS3XXX_PCIE0_MEM_BASE,
- .end = CNS3XXX_PCIE0_HOST_BASE - 1, /* 176 MiB */
- .flags = IORESOURCE_MEM,
- },
- .irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
- .port = 0,
- },
- [1] = {
- .host_regs = (void __iomem *)CNS3XXX_PCIE1_HOST_BASE_VIRT,
- .cfg0_regs = (void __iomem *)CNS3XXX_PCIE1_CFG0_BASE_VIRT,
- .cfg1_regs = (void __iomem *)CNS3XXX_PCIE1_CFG1_BASE_VIRT,
- .res_io = {
- .name = "PCIe1 I/O space",
- .start = CNS3XXX_PCIE1_IO_BASE,
- .end = CNS3XXX_PCIE1_CFG0_BASE - 1, /* 16 MiB */
- .flags = IORESOURCE_IO,
- },
- .res_mem = {
- .name = "PCIe1 non-prefetchable",
- .start = CNS3XXX_PCIE1_MEM_BASE,
- .end = CNS3XXX_PCIE1_HOST_BASE - 1, /* 176 MiB */
- .flags = IORESOURCE_MEM,
- },
- .irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
- .port = 1,
- },
-};
-
-static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci)
-{
- int port = cnspci->port;
- u32 reg;
- unsigned long time;
-
- reg = __raw_readl(MISC_PCIE_CTRL(port));
- /*
- * Enable Application Request to 1, it will exit L1 automatically,
- * but when chip back, it will use another clock, still can use 0x1.
- */
- reg |= 0x3;
- __raw_writel(reg, MISC_PCIE_CTRL(port));
-
- pr_info("PCIe: Port[%d] Enable PCIe LTSSM\n", port);
- pr_info("PCIe: Port[%d] Check data link layer...", port);
-
- time = jiffies;
- while (1) {
- reg = __raw_readl(MISC_PCIE_PM_DEBUG(port));
- if (reg & 0x1) {
- pr_info("Link up.\n");
- cnspci->linked = 1;
- break;
- } else if (time_after(jiffies, time + 50)) {
- pr_info("Device not found.\n");
- break;
- }
- }
-}
-
-static void cns3xxx_write_config(struct cns3xxx_pcie *cnspci,
- int where, int size, u32 val)
-{
- void __iomem *base = cnspci->host_regs + (where & 0xffc);
- u32 v;
- u32 mask = (0x1ull << (size * 8)) - 1;
- int shift = (where % 4) * 8;
-
- v = readl_relaxed(base);
-
- v &= ~(mask << shift);
- v |= (val & mask) << shift;
-
- writel_relaxed(v, base);
- readl_relaxed(base);
-}
-
-static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
-{
- u16 mem_base = cnspci->res_mem.start >> 16;
- u16 mem_limit = cnspci->res_mem.end >> 16;
- u16 io_base = cnspci->res_io.start >> 16;
- u16 io_limit = cnspci->res_io.end >> 16;
-
- cns3xxx_write_config(cnspci, PCI_PRIMARY_BUS, 1, 0);
- cns3xxx_write_config(cnspci, PCI_SECONDARY_BUS, 1, 1);
- cns3xxx_write_config(cnspci, PCI_SUBORDINATE_BUS, 1, 1);
- cns3xxx_write_config(cnspci, PCI_MEMORY_BASE, 2, mem_base);
- cns3xxx_write_config(cnspci, PCI_MEMORY_LIMIT, 2, mem_limit);
- cns3xxx_write_config(cnspci, PCI_IO_BASE_UPPER16, 2, io_base);
- cns3xxx_write_config(cnspci, PCI_IO_LIMIT_UPPER16, 2, io_limit);
-
- if (!cnspci->linked)
- return;
-
- /* Set Device Max_Read_Request_Size to 128 byte */
- pcie_bus_config = PCIE_BUS_PEER2PEER;
-
- /* Disable PCIe0 Interrupt Mask INTA to INTD */
- __raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(cnspci->port));
-}
-
-static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
- struct pt_regs *regs)
-{
- if (fsr & (1 << 10))
- regs->ARM_pc += 4;
- return 0;
-}
-
-void __init cns3xxx_pcie_init_late(void)
-{
- int i;
- void *private_data;
- struct hw_pci hw_pci = {
- .nr_controllers = 1,
- .ops = &cns3xxx_pcie_ops,
- .setup = cns3xxx_pci_setup,
- .map_irq = cns3xxx_pcie_map_irq,
- .private_data = &private_data,
- };
-
- pcibios_min_io = 0;
- pcibios_min_mem = 0;
-
- hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
- "imprecise external abort");
-
- for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
- cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
- cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
- cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
- cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
- private_data = &cns3xxx_pcie[i];
- pci_common_init(&hw_pci);
- }
-
- pci_assign_unassigned_resources();
-}
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
deleted file mode 100644
index 72e8a7ec7a38..000000000000
--- a/arch/arm/mach-cns3xxx/pm.c
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2008 Cavium Networks
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/atomic.h>
-#include "cns3xxx.h"
-#include "pm.h"
-#include "core.h"
-
-void cns3xxx_pwr_clk_en(unsigned int block)
-{
- u32 reg = __raw_readl(PM_CLK_GATE_REG);
-
- reg |= (block & PM_CLK_GATE_REG_MASK);
- __raw_writel(reg, PM_CLK_GATE_REG);
-}
-EXPORT_SYMBOL(cns3xxx_pwr_clk_en);
-
-void cns3xxx_pwr_clk_dis(unsigned int block)
-{
- u32 reg = __raw_readl(PM_CLK_GATE_REG);
-
- reg &= ~(block & PM_CLK_GATE_REG_MASK);
- __raw_writel(reg, PM_CLK_GATE_REG);
-}
-EXPORT_SYMBOL(cns3xxx_pwr_clk_dis);
-
-void cns3xxx_pwr_power_up(unsigned int block)
-{
- u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
-
- reg &= ~(block & CNS3XXX_PWR_PLL_ALL);
- __raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
-
- /* Wait for 300us for the PLL output clock locked. */
- udelay(300);
-};
-EXPORT_SYMBOL(cns3xxx_pwr_power_up);
-
-void cns3xxx_pwr_power_down(unsigned int block)
-{
- u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
-
- /* write '1' to power down */
- reg |= (block & CNS3XXX_PWR_PLL_ALL);
- __raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
-};
-EXPORT_SYMBOL(cns3xxx_pwr_power_down);
-
-static void cns3xxx_pwr_soft_rst_force(unsigned int block)
-{
- u32 reg = __raw_readl(PM_SOFT_RST_REG);
-
- /*
- * bit 0, 28, 29 => program low to reset,
- * the other else program low and then high
- */
- if (block & 0x30000001) {
- reg &= ~(block & PM_SOFT_RST_REG_MASK);
- } else {
- reg &= ~(block & PM_SOFT_RST_REG_MASK);
- __raw_writel(reg, PM_SOFT_RST_REG);
- reg |= (block & PM_SOFT_RST_REG_MASK);
- }
-
- __raw_writel(reg, PM_SOFT_RST_REG);
-}
-
-void cns3xxx_pwr_soft_rst(unsigned int block)
-{
- static unsigned int soft_reset;
-
- if (soft_reset & block) {
- /* SPI/I2C/GPIO use the same block, reset once. */
- return;
- } else {
- soft_reset |= block;
- }
- cns3xxx_pwr_soft_rst_force(block);
-}
-EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
-
-void cns3xxx_restart(enum reboot_mode mode, const char *cmd)
-{
- /*
- * To reset, we hit the on-board reset register
- * in the system FPGA.
- */
- cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(GLOBAL));
-}
-
-/*
- * cns3xxx_cpu_clock - return CPU/L2 clock
- * aclk: cpu clock/2
- * hclk: cpu clock/4
- * pclk: cpu clock/8
- */
-int cns3xxx_cpu_clock(void)
-{
- u32 reg = __raw_readl(PM_CLK_CTRL_REG);
- int cpu;
- int cpu_sel;
- int div_sel;
-
- cpu_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
- div_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
-
- cpu = (300 + ((cpu_sel / 3) * 100) + ((cpu_sel % 3) * 33)) >> div_sel;
-
- return cpu;
-}
-EXPORT_SYMBOL(cns3xxx_cpu_clock);
-
-atomic_t usb_pwr_ref = ATOMIC_INIT(0);
-EXPORT_SYMBOL(usb_pwr_ref);
diff --git a/arch/arm/mach-cns3xxx/pm.h b/arch/arm/mach-cns3xxx/pm.h
deleted file mode 100644
index 61b73e59f0ff..000000000000
--- a/arch/arm/mach-cns3xxx/pm.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2004 ARM Limited
- * Copyright 2008 Cavium Networks
- */
-
-#ifndef __CNS3XXX_PM_H
-#define __CNS3XXX_PM_H
-
-#include <linux/atomic.h>
-
-void cns3xxx_pwr_clk_en(unsigned int block);
-void cns3xxx_pwr_clk_dis(unsigned int block);
-void cns3xxx_pwr_power_up(unsigned int block);
-void cns3xxx_pwr_power_down(unsigned int block);
-
-extern atomic_t usb_pwr_ref;
-
-#endif /* __CNS3XXX_PM_H */
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 247568bc17a2..75b8a3eeb23a 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -316,18 +316,6 @@ config USB_OCTEON_HCD
To compile this driver as a module, choose M here. The module
will be called octeon-hcd.
-config USB_CNS3XXX_EHCI
- bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
- depends on ARCH_CNS3XXX || COMPILE_TEST
- select USB_EHCI_HCD_PLATFORM
- help
- This option is deprecated now and the driver was removed, use
- USB_EHCI_HCD_PLATFORM instead.
-
- Enable support for the CNS3XXX SOC's on-chip EHCI controller.
- It is needed for high-speed (480Mbit/sec) USB 2.0 device
- support.
-
config USB_EHCI_HCD_PLATFORM
tristate "Generic EHCI driver for a platform device"
help
@@ -577,17 +565,6 @@ config USB_OHCI_EXYNOS
Enable support for the Samsung S5Pv210 and Exynos SOC's on-chip OHCI
controller.
-config USB_CNS3XXX_OHCI
- bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
- depends on ARCH_CNS3XXX || COMPILE_TEST
- select USB_OHCI_HCD_PLATFORM
- help
- This option is deprecated now and the driver was removed, use
- USB_OHCI_HCD_PLATFORM instead.
-
- Enable support for the CNS3XXX SOC's on-chip OHCI controller.
- It is needed for low-speed USB 1.0 device support.
-
config USB_OHCI_HCD_PLATFORM
tristate "Generic OHCI driver for a platform device"
help
--
2.29.2
