Re: uvc gadget performance issues with skip interrupt impl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 25, 2022, Jeff Vanhoof wrote:
> Hi,
> 
> During the queuing up of requests from the UVC Gadget Driver to DWC3 for one
> frame, if a missed isoc event occurs then it is possible for the next
> consecutive frame(s) to also see missed isoc related errors as a result,
> presenting to the user as a large video stall.
> 
> This issue appears to have come in with the skip interrupt implementation in
> the UVC Gadget Driver:
> 
> usb: gadget: uvc: decrease the interrupt load to a quarter
> https://urldefense.com/v3/__https://lore.kernel.org/r/20210628155311.16762-6-m.grzeschik@pengutronix.de__;!!A4F2R9G_pg!YifcGZZ9faEMTvB_SrELSS1iNw50koSiag3tONKk-3ToxfPL5Li0KTs6KUub_sUl3M9VgKd9qC8PsNguV_l6$  
> 
> Below is an example flow of how the issue can occur (and why).
> 
> For example (ISOC use case):
> 1) DWC3 driver has 4 requests queued up from the UVC Gadget Driver.
> 
> 2) First request has IOC bit set due to no_interrupt=0 also being set, and IMI
> bit is set to detect missed ISOC.
> 
> 3) Requests 2,3,4 do not have IOC bit set due to no_interrupt=1 being set for
> them. (Note: Whether or not the IMI bit is set for these requests does not
> matter, issue can still crop up as there is no guarantee that request 2,3,4
> will see a missed isoc event)
> 
> 4) First request gets a missed isoc event and DWC3 returns the req and error to
> UVC Gadget Driver.
> 
> 5) UVC Gadget Driver, in uvc_video_complete, proceeds to cancel the queue by
> calling uvcg_queue_cancel.
> 
> 6) UVC Gadget Driver stops sending additional requests for the current frame.
> 
> 7) DWC3 will still have requests 2,3,4 queued up and sitting in its
> started_list as these requests are not given back to the UVC gadget driver
> because they each have no_interrupt=1 set, and the DWC3 driver will not have
> any additional interrupts triggered for them as a result.
> 
> 8) Approximately 30-100ms later a new frame enters the UVC Gadget Driver (from
> V4L2), and it proceeds to send additional requests to the DWC3 driver.
> 
> 9) Because requests 2,3,4 are still sitting in the started_list of the dwc3
> driver, the driver does not stop and restart the transmission that normally
> helps it recover from the missed isoc situation (this usually happens in
> between frames).
> 
> 10) Some of the requests from the new frame will have no_interrupt=0 set, but
> these requests will be considered missed/late by the DWC3 controller.
> 
> 11) Because these new requests have the IOC bit set (and possibly IMI),
> interrupts will be triggered causing the DWC3 Driver to return the req and
> error to the UVC Gadget Driver.
> 
> 12) And if the last set of requests sent by the UVC Gadget Driver have
> "no_interrupt=1" set, then DWC3 may not interrupt further until new requests
> come in, and the cycle of frame drops/errors will continue.
> 
> I have briefly mentioned this issue in another conversation with Thinh. At the
> time he mentioned that 3 things could possibly be done to help resolve this
> issue:
> 
> 1) The UVC Gadget Driver should ensure that the last requests queued to DWC3
> must always have "no_interrupt=0" set.
> 
> 2) DWC3 can detect stale requests, stop the transmission and give back the
> requests to the UVC Gadget Driver, and restart the transmission for the new set
> of requests.
> 
> 3) Set "no_interrupt=0" for each request.
>  
> I have tested out various implementations for all 3 possibilities and they each
> seem to work ok. Note that these test implementations are not ready for prime
> time, but served as a way to prove that potential changes in these areas could
> help to resolve this issue.
> 
> I believe that a change for the UVC Gadget Driver should be made, but it also
> makes sense for the DWC3 driver to also attempt to recover from this situation
> if possible.
> 
> Does anyone have an opinion on the best way to proceed?
> 


Just curious, does the UVC protocol have some synchronization mechanism
if the video data is coming in late?

Isoc data is time sensitive, and isoc request is earmarked for a
specific interval. As you mentioned, a change in UVC gadget driver
should be made. If we simply workaround the underrun issue by
implementing in option 2), will we experience drifts in the video data?
(e.g. the video may not in-sync with the audio)

Does the UVC protocol allow using larger periodic interval?

Thanks,
Thinh




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux