ADL-N systems have the same issue as ADL-P, where a large boot firmware delay is seen if USB ports are left in U3 at shutdown. So apply the XHCI_RESET_TO_DEFAULT quirk to ADL-N as well. This patch depends on "xhci: Add quirk to reset host back to default state at shutdown". Signed-off-by: Reka Norman <rekanorman@xxxxxxxxxxxx> --- drivers/usb/host/xhci-pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 7bccbe50bab15..f98cf30a3c1a5 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -59,6 +59,7 @@ #define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI 0x9a13 #define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI 0x1138 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI 0x51ed +#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI 0x54ed #define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 @@ -246,7 +247,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_MISSING_CAS; if (pdev->vendor == PCI_VENDOR_ID_INTEL && - pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI) + (pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI)) xhci->quirks |= XHCI_RESET_TO_DEFAULT; if (pdev->vendor == PCI_VENDOR_ID_INTEL && -- 2.38.0.135.g90850a2211-goog
