Linux USB Users

• Thread Index

• [PATCH v6 12/22] mfd: omap-usb-host: know about number of ports from revision register
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 13/22] mfd: omap-usb-host: override number of ports from platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 15/22] mfd: omap-usb-host: Manage HSIC clocks for HSIC mode
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 16/22] mfd: omap-usb-host: Get rid of unnecessary spinlock
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 14/22] mfd: omap-usb-host: cleanup clock management code
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 18/22] USB: ehci-omap: Don't free gpios that we didn't request
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 19/22] ARM: OMAP3: clock data: get rid of unused USB host clock aliases and dummies
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 17/22] mfd: omap-usb-host: clean up omap_usbhs_init()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 21/22] mfd: omap-usb-host: Don't spam console on clk_set_parent failure
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 20/22] ARM: OMAP4: clock data: get rid of unused USB host clock aliases
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 22/22] mdf: omap-usb-host: get rid of build warning
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 05/22] mfd: omap-usb-tll: introduce and use mode_needs_tll()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 2/2] net: asix: handle packets crossing URB boundaries
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v3 1/2] net: asix: init ASIX AX88772B MAC from EEPROM
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 1/4] arm: tegra: Add DT nodes for Tegra USB PHY
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• [PATCH 2/4] USB: PHY: Get rid of instance number to differentiate legacy controller
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• [PATCH 3/4] USB: PHY: Tegra: Get rid of instance number to differentiate PHY type
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• [PATCH 4/4] usb: Add APIs to access host registers from Tegra PHY
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• [PATCH 0/4] usb: Supporting patches for registering Tegra USB PHY as a platform driver
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Re: linux-3.7.1: kmemleak reports in comm "usb-storage"?
  • From: Martin Mokrejs <mmokrejs@xxxxxxxxxxxxxxxxxx>
• Re: linux-3.7.1: kmemleak reports in comm "usb-storage"?
  • From: Martin Mokrejs <mmokrejs@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] module, async: async_synchronize_full() on module init iff async is used
  • From: Alex Riesen <raa.lkml@xxxxxxxxx>
• Re: Does USB isochronous mode work on EHCI port?
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2] HID: add support for Sony RF receiver with USB product id 0x0374
  • From: Jiri Kosina <jkosina@xxxxxxx>
• [PATCH v3 3/3] usb: chipidea: imx: Add system suspend/resume API
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v3 2/3] usb: mxs-phy: add set_suspend API
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v3 1/3] ARM i.MX6: change mxs usbphy clock usage
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: Linux 3.8-rc1 - another regression on USB :-(
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH v9] usb_8dev: Add support for USB2CAN interface from 8 devices
  • From: "Bernd Krumböck" <krumboeck@xxxxxxxxxxxxxxx>
• Re: [PATCH v9] usb_8dev: Add support for USB2CAN interface from 8 devices
  • From: "Bernd Krumböck" <krumboeck@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/4] ARM: Exynos5250: Enabling ehci-s5p driver
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH v4 4/4] ARM: Exynos5250: Enabling dwc3-exynos driver
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH v4 3/4] ARM: Exynos5250: Add clock information for dwc3-exynos
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH v4 2/4] ARM: Exynos5250: Enabling ohci-exynos driver
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [RFC PATCH 0/7] usb: musb: add driver for control module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: phy: remove unused APIs from Tegra PHY.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v9] usb_8dev: Add support for USB2CAN interface from 8 devices
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [RFC PATCH 0/7] usb: musb: add driver for control module
  • From: kishon <kishon@xxxxxx>
• [PATCH v5 1/4] ARM: Exynos5250: Enabling ehci-s5p driver
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH v4 1/4] ARM: Exynos5250: Enabling ehci-s5p driver
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH v2] HID: add support for Sony RF receiver with USB product id 0x0374
  • From: Fernando Luis Vazquez Cao <fernando_b1@xxxxxxxxxxxxx>
• Re: Linux 3.8-rc1 - another regression on USB :-(
  • From: Woody Suwalski <terraluna977@xxxxxxxxx>
• Re: [PATCH] module, async: async_synchronize_full() on module init iff async is used
  • From: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] module, async: async_synchronize_full() on module init iff async is used
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] module, async: async_synchronize_full() on module init iff async is used
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] module, async: async_synchronize_full() on module init iff async is used
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] module, async: async_synchronize_full() on module init iff async is used
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] module, async: async_synchronize_full() on module init iff async is used
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH v2 1/4] ARM i.MX6: use reserved bit for mxs phy clock gate
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] ARM i.MX6: use reserved bit for mxs phy clock gate
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: linux-3.7.1: kmemleak reports in comm "usb-storage"?
  • From: Martin Mokrejs <mmokrejs@xxxxxxxxxxxxxxxxxx>
• Re: linux-3.7.1: kmemleak reports in comm "usb-storage"?
  • From: Martin Mokrejs <mmokrejs@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] ARM i.MX6: use reserved bit for mxs phy clock gate
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: usb serial driver: private data already deallocated when release function is called
  • From: Greg KH <greg@xxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: usb serial driver: private data already deallocated when release function is called
  • From: Tilman <tilmanglotzner@xxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] arm: mvebu: Enable USB controllers on Armada XP OpenBlocks AX3-4 board
  • From: Nobuhiro Iwamatsu <iwamatsu@xxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH 0/6] arm: mvebu: Add support for USB host controllers in Armada 370/XP
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9] usb_8dev: Add support for USB2CAN interface from 8 devices
  • From: "Bernd Krumböck" <krumboeck@xxxxxxxxxxxxxxx>
• Re: [PATCH v9] usb_8dev: Add support for USB2CAN interface from 8 devices
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v9] usb_8dev: Add support for USB2CAN interface from 8 devices
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: usb device removed from sysfs before input children devices
  • From: Karl Relton <karllinuxtest.relton@xxxxxxxxxxxx>
• Re: [PATCH v9] usb_8dev: Add support for USB2CAN interface from 8 devices
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] arm: mvebu: Add support for USB host controllers in Armada 370/XP
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: Clarifications on some usb driver terms
  • From: Peter Stuge <peter@xxxxxxxx>
• Re: Clarifications on some usb driver terms
  • From: stl <st.lambert02@xxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: How to assign a device to the companion
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: remove unused APIs from Tegra PHY.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: remove unused APIs from Tegra PHY.
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: How to assign a device to the companion
  • From: makuda <makuda@xxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• RE: [RFC PATCH 0/7] usb: musb: add driver for control module
  • From: "B, Ravi" <ravibabu@xxxxxx>
• Re: [PATCH v2] HID: add support for Sony RF receiver with USB product id 0x0374
  • From: Jiri Kosina <jkosina@xxxxxxx>
• RE: [PATCH 06/30] usb/gadget: add some infracture to register/unregister functions
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: Clarifications on some usb driver terms
  • From: Felipe Balbi <balbi@xxxxxx>
• Clarifications on some usb driver terms
  • From: stl <st.lambert02@xxxxxxxxx>
• Re: When and how is the probe() function called?
  • From: Felipe Balbi <balbi@xxxxxx>
• When and how is the probe() function called?
  • From: stl <st.lambert02@xxxxxxxxx>
• Re: [RFC PATCH 0/7] usb: musb: add driver for control module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH 1/7] drivers: usb: phy: add a new driver for usb part of control module
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC PATCH 0/7] usb: musb: add driver for control module
  • From: kishon <kishon@xxxxxx>
• Re: [RFC PATCH 2/7] ARM: OMAP: devices: create device for usb part of control module
  • From: kishon <kishon@xxxxxx>
• Re: [RFC PATCH 1/7] drivers: usb: phy: add a new driver for usb part of control module
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH v5 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH 2/6] arm: mvebu: Enable USB controllers on Armada 370 evaluation board
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/7] usb: musb: add driver for control module
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC PATCH 1/7] drivers: usb: phy: add a new driver for usb part of control module
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v4 3/4] ARM: Exynos5250: Add clock information for dwc3-exynos
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v4 4/4] ARM: Exynos5250: Enabling dwc3-exynos driver
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v4 2/4] ARM: Exynos5250: Enabling ohci-exynos driver
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v4 1/4] ARM: Exynos5250: Enabling ehci-s5p driver
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v4 0/4] Enable ehci, ohci and dwc3 devices on exynos5250
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH] CDC_NCM adding support IFF_NOARP for infineon modem platform
  • From: Wei Shuai <cpuwolf@xxxxxxxxx>
• Re: [PATCH 2/6] arm: mvebu: Enable USB controllers on Armada 370 evaluation board
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC PATCH 2/7] ARM: OMAP: devices: create device for usb part of control module
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 06/30] usb/gadget: add some infracture to register/unregister functions
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] ARM i.MX6: use reserved bit for mxs phy clock gate
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: close blocks, if FIFO full on gagdet serial
  • From: Petr Masek <masekp@xxxxxxxxxxxx>
• Re: [PATCH 1/6] arm: mvebu: Add support for USB host controllers in Armada 370/XP
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH v2] HID: add support for Sony RF receiver with USB product id 0x0374
  • From: Fernando Luis Vázquez Cao <fernando_b1@xxxxxxxxxxxxx>
• [PATCH] usb: dwc3: Remove dwc3 dependency on host AND gadget.
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH 1/6] arm: mvebu: Add support for USB host controllers in Armada 370/XP
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH] usb: phy: remove unused APIs from Tegra PHY.
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• [PATCH 0/6] arm: mvebu: Add support for USB host controllers in Armada 370/XP
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/6] arm: mvebu: Add support for USB host controllers in Armada 370/XP
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH 6/6] arm: mvebu: Update defconfig to select USB support
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH 5/6] arm: mvebu: Enable USB controllers on Armada XP OpenBlocks AX3-4 board
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/6] arm: mvebu: Enable USB controllers on Armada XP evaluation board
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/6] arm: mvebu: Enable USB controllers on Armada 370 Mirabox board
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/6] arm: mvebu: Enable USB controllers on Armada 370 evaluation board
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] HID: add support for Sony RF receiver with USB product id 0x0374
  • From: Fernando Luis Vazquez Cao <fernando_b1@xxxxxxxxxxxxx>
• Re: [PATCH] HID: add support for Sony RF receiver with USB product id 0x0374
  • From: Antonio Ospite <ospite@xxxxxxxxxxxxxxxxx>
• [PATCH RESEND usb-linus] USB: option: add TP-LINK HSUPA Modem MA180
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: TP-LINK HSUPA Modem MA180 2357:0201
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH net] net: qmi_wwan: add TP-LINK HSUPA Modem MA180
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [RFC PATCH 1/7] drivers: usb: phy: add a new driver for usb part of control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 4/7] drivers: usb: start using the control module driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 7/7] ARM: dts: omap: Add omap control usb data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 0/7] usb: musb: add driver for control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 2/7] ARM: OMAP: devices: create device for usb part of control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 3/7] ARM: OMAP2: MUSB: Specify omap4 has mailbox
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 5/7] ARM: dts: omap: Add usb_otg and glue data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 6/7] ARM: dts: omap: Add omap-usb2 dt data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] CDC_NCM adding support IFF_NOARP for infineon modem platform
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 0/2] usb: exynos: Fix compatible strings used for device
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• [150813.679919] kworker/u:2: page allocation failure: order:4, mode:0x2000d0
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [V3 PATCH 12/25] arm: pxa910: change the defintion of usb devices
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 07/25] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 18/25] usb: gadget: mv_udc: add extern chip support
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 10/25] usb: otg: mv_otg: use PHY driver for otg
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 15/25] arm: mmp: remove the usb phy setting
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 25/25] usb: ehci: ehci-mv: add device tree support
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 24/25] usb: otg: mv_otg: add device tree support
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 09/25] usb: ehci: ehci-mv: use PHY driver for ehci
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 00/25] mv-usb fix and enhancement patches
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 01/25] usb: gadget: mv_udc: use udc_start and udc_stop functions
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 23/25] usb: gadget: mv_udc: add device tree support
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 19/25] usb: ehci: ehci-mv: add extern chip support
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 11/25] arm: mmp2: change the defintion of usb devices
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 21/25] arm: mmp: add extern chip support for brownstone
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 20/25] usb: otg: mv_otg: add extern chip support
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 17/25] usb: phy: mv_usb2_phy: add externel chip support
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 22/25] arm: mmp: add extern chip support for ttc_dkb
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 16/25] arm: mmp: remove usb devices from pxa168
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 14/25] arm: ttc_dkb: add usb support
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 13/25] arm: brownstone: add usb support for the board
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 08/25] usb: gadget: mv_udc: use PHY driver for udc
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 05/25] usb: host: ehci-mv: remove unused variable
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 04/25] usb: otg: mv_otg: use devm_xxx for probe
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 06/25] usb: gadget: mv_udc: fix the value of tranceiver
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 02/25] usb: gadget: mv_udc: use devm_xxx for probe
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [V3 PATCH 03/25] usb: gadget: mv_udc: fix the warning of mv_udc_remove
  • From: Chao Xie <chao.xie@xxxxxxxxxxx>
• [PATCH v2 3/4] usb: mxs-phy: add set_suspend API
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2 2/4] usb: mxs-phy: change clock usage for i.mx6q
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2 1/4] ARM i.MX6: use reserved bit for mxs phy clock gate
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2 4/4] usb: chipidea: imx: Add system suspend/resume API
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v7] usb: phy: samsung: Add support to set pmu isolation
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• RE: [PATCH V2 1/8] usb/dwc3: Enable usb2 LPM only when connected as usb2.0
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH] usbnet: dm9601: Fix incorrect command
  • From: Tushar Behera <tushar.behera@xxxxxxxxxx>
• Re: [PATCH] usb: phy: samsung: Add support to set pmu isolation
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• [PATCH] HID: add support for Sony RF receiver with USB product id 0x0374
  • From: Fernando Luis Vázquez Cao <fernando_b1@xxxxxxxxxxxxx>
• [PATCH v5 3/3] ARM: i.MX clock: Change the connection-id for fsl-usb2-udc
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v5 2/3] usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v5 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v5 0/3] Fix the Build error for fsl_mxc_udc.c
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] usbnet: allow status interrupt URB to always be active
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [Resend PATCH V4 0/10] usb: usb port power off mechanism anc expose usb port connect type
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH] CDC_NCM adding support IFF_NOARP for infineon modem platform
  • From: Peter Stuge <peter@xxxxxxxx>
• Re: [PATCH v5 2/4] usb: phy: samsung: Add host phy support to samsung-phy driver
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] usb: phy: samsung: Add support to set pmu isolation
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: xhci problem
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v9] usb_8dev: Add support for USB2CAN interface from 8 devices
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] USB: prevent overlapping access by usb-storage and usbfs
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: prevent overlapping access by usb-storage and usbfs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: prevent overlapping access by usb-storage and usbfs
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] USB: prevent overlapping access by usb-storage and usbfs
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] CDC_NCM adding support IFF_NOARP for infineon modem platform
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: close blocks, if FIFO full on gagdet serial
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] usbnet: allow status interrupt URB to always be active
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH 1/2] usbnet: allow status interrupt URB to always be active
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH v3 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: close blocks, if FIFO full on gagdet serial
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: USB issue with kernel 3.6
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/14] mfd: omap-usb-host: Consolidate OMAP USB-HS platform data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] CDC_NCM adding support IFF_NOARP for infineon modem platform
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Alex Riesen <raa.lkml@xxxxxxxxx>
• [PATCH 5/5] USB: io_ti: kill custom closing_wait implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 2/5] USB: io_ti: use tty-port drain delay
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 4/5] USB: io_ti: query hardware-buffer status in chars_in_buffer
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 3/5] USB: serial: grab disconnect mutex in chars_in_buffer
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 0/5] USB: io-ti: remove custom closing-wait implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 1/5] USB: io_ti: move write-fifo flushing to close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [Patch] Problem in drivers/usb/serial/io_ti - Kernel oops when disconnecting an opened device
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: USB issue with kernel 3.6
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• USB OTG vs USB HOST with UVC camera
  • From: "stefano.morgani@xxxxxxxxxx" <stefano.morgani@xxxxxxxxxx>
• Re: [PATCH V2 1/8] usb/dwc3: Enable usb2 LPM only when connected as usb2.0
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v4 3/3] ARM: i.MX clock: Change the connection-id for fsl-usb2-udc
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v4 2/3] usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v4 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v4 0/3] Fix the Build error for fsl_mxc_udc.c
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v3 2/2] usb: phy: samsung: Add PHY support for USB 3.0 controller
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v3 1/2] usb: phy: samsung: Common out the generic stuff
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v3 0/2] Adding USB 3.0 DRD-phy support for exynos5250
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH 04/14] usb: phy: nop: Handle power supply regulator for the PHY
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH v7 2/4] usb: phy: samsung: Add host phy support to samsung-phy driver
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH 04/14] usb: phy: nop: Handle power supply regulator for the PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 01/14] mfd: omap-usb-host: Consolidate OMAP USB-HS platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 04/14] usb: phy: nop: Handle power supply regulator for the PHY
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH V2 1/8] usb/dwc3: Enable usb2 LPM only when connected as usb2.0
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH V2 1/8] usb/dwc3: Enable usb2 LPM only when connected as usb2.0
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH V2 1/8] usb/dwc3: Enable usb2 LPM only when connected as usb2.0
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH v3 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH V2 1/8] usb/dwc3: Enable usb2 LPM only when connected as usb2.0
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH V2 8/8] usb/dwc3: req->queued must be forced to false in cleanup
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH V2 7/8] usb/dwc3: Fix scatter gather implementation
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH V2 6/8] usb/dwc3: No need to pass params in case of UPDATE TRANSFER
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH V2 4/8] usb/dwc3: fix isoc END TRANSFER Condition
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH V2 5/8] usb/dwc3: Fix skip LINK-TRB on ISOC
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH V2 3/8] usb/dwc3: Correct Return from ep_queue
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH V2 2/8] usb/dwc3: Fix missed isoc
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH V2 1/8] usb/dwc3: Enable usb2 LPM only when connected as usb2.0
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH V2 0/8] usb/dwc3: misc patches rebased at dwc3-for-v3.8
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH v3 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v3 3/3] ARM: i.MX clock: Change the connection-id for fsl-usb2-udc
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v3 2/3] usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v3 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v3 0/3] Fix the Build error for fsl_mxc_udc.c
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 04/14] usb: phy: nop: Handle power supply regulator for the PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 07/14] usb: ehci-omap: Instantiate PHY devices if required
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH RFC] usb: dwc3: Remove dwc3 dependency on gadget.
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH v2 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [RFC PATCH 1/6] Core files for the DWC2 driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH v2 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v5 2/4] usb: phy: samsung: Add host phy support to samsung-phy driver
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH RFC] usb: dwc3: Remove dwc3 dependency on gadget.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH v5 2/4] usb: phy: samsung: Add host phy support to samsung-phy driver
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• [GIT PATCH] USB patches for 3.8-rc3
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• RE: [PATCH 0/6] UVC gadget cleanup
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: usb serial driver: private data already deallocated when release function is called
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH 1/1]linux-usb:optimize the matching rules and support new switch command for Huawei USB storage devices
  • From: fangxiaozhi 00110321 <fangxiaozhi@xxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 2/2]linux-usb:optimize to match the Huawei USB storage devices and support new switch command
  • From: "Fangxiaozhi (Franko)" <fangxiaozhi@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: usb serial driver: private data already deallocated when release function is called
  • From: Tilman <tilmanglotzner@xxxxxxxxxxx>
• Re: [PATCH 2/2]linux-usb:optimize to match the Huawei USB storage devices and support new switch command
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 1/1]linux-usb:optimize to match the Huawei USB storage devices and support new switch command
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH] usb: Crucible Technologies COMET Caller ID - pid added - v2
  • From: Tomasz Mloduchowski <q@xxxxxxx>
• Re: [PATCH] usb: Crucible Technologies COMET Caller ID - pid added.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: Crucible Technologies COMET Caller ID - pid added.
  • From: Tomasz Mloduchowski <q@xxxxxxx>
• Re: Bug#677472: [3.1->3.2 regression] Immediate wake on suspend, associated with OHCI on MCP51
  • From: "Octavio Alvarez" <alvarezp@xxxxxxxxxxxx>
• Re: [PATCH] usb: Crucible Technologies COMET Caller ID - pid added.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• close blocks, if FIFO full on gagdet serial
  • From: masekp@xxxxxxxxxxxx
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH] usb: Crucible Technologies COMET Caller ID - pid added.
  • From: Tomasz Mloduchowski <q@xxxxxxx>
• Re: USB issue with kernel 3.6
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Alex Riesen <raa.lkml@xxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 回复: Re: how to disable usb hub suspend function
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Re: how to disable usb hub suspend function
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: linux-3.7.1: kmemleak reports in comm "usb-storage"?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: xhci problem
  • From: Allan Dennis <aldennis@xxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Alex Riesen <raa.lkml@xxxxxxxxx>
• 回复: Re: how to disable usb hub suspend function
  • From: "gavin.kx" <gavin.kx@xxxxxx>
• Re: Re: how to disable usb hub suspend function
  • From: "gavin.kx" <gavin.kx@xxxxxx>
• Re: Re: how to disable usb hub suspend function
  • From: "gavin.kx" <gavin.kx@xxxxxx>
• Re: [PATCH] CDC_NCM adding support IFF_NOARP for infineon modem platform
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: linux-3.7.1: kmemleak reports in comm "usb-storage"?
  • From: Martin Mokrejs <mmokrejs@xxxxxxxxxxxxxxxxxx>
• Re: linux-3.7.1: kmemleak reports in comm "usb-storage"?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: linux-3.7.1: kmemleak reports in comm "usb-storage"?
  • From: Martin Mokrejs <mmokrejs@xxxxxxxxxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Alex Riesen <raa.lkml@xxxxxxxxx>
• TP-LINK HSUPA Modem MA180 2357:0201
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Alex Riesen <raa.lkml@xxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Alex Riesen <raa.lkml@xxxxxxxxx>
• Re: linux-3.7.1: kmemleak reports in comm "usb-storage"?
  • From: Martin Mokrejs <mmokrejs@xxxxxxxxxxxxxxxxxx>
• Re: linux-3.7.1: kmemleak reports in comm "usb-storage"?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux 3.8-rc1 - another regression on USB :-(
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux 3.8-rc1 - another regression on USB :-(
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: 回复: 回复: how to disable usb hub suspend function
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Re: how to disable usb hub suspend function
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] drivers/usb/host/uhci-* : check buffer length to avoid memory overflow
  • From: Chen Gang <gang.chen@xxxxxxxxxxx>
• Re: Linux 3.8-rc1 - another regression on USB :-(
  • From: Andreas Mohr <andi@xxxxxxxx>
• [PATCH] USB: misc: fixup smatch WARNING
  • From: Dongjin Kim <tobetter@xxxxxxxxx>
• [PATCH] CDC_NCM adding support IFF_NOARP for infineon modem platform
  • From: Wei Shuai <cpuwolf@xxxxxxxxx>
• Re: TP-LINK HSUPA Modem MA180 2357:0201
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• Re: [PATCH] usb: gadget: move the global the_dev variable to their users
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• Re: USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Alex Riesen <raa.lkml@xxxxxxxxx>
• [PATCH] usb: misc: usb3503_probe() can be static
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• 回复: 回复: how to disable usb hub suspend function
  • From: "gavin.kx" <gavin.kx@xxxxxx>
• Re: [usb:usb-next 4/10] drivers/usb/misc/usb3503.c:238 usb3503_probe() error: we previously assumed 'pdata' could be null (see line 196)
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• Re: [usb:usb-next 4/10] drivers/usb/misc/usb3503.c:238 usb3503_probe() error: we previously assumed 'pdata' could be null (see line 196)
  • From: Dongjin Kim <tobetter@xxxxxxxxx>
• [usb:usb-next 4/10] drivers/usb/misc/usb3503.c:238 usb3503_probe() error: we previously assumed 'pdata' could be null (see line 196)
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• 回复: Re: how to disable usb hub suspend function
  • From: "gavin.kx" <gavin.kx@xxxxxx>
• Re: [PATCH v5 2/4] usb: phy: samsung: Add host phy support to samsung-phy driver
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/2] arm: tegra: Add new DT property to USB node.
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH RESEND 2/2] usb: host: tegra: Resetting PORT0 based on information received via DT.
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v3] usb: phy: use kzalloc to allocate struct tegra_usb_phy
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 2/2]linux-usb:optimize to match the Huawei USB storage devices and support new switch command
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v3] usb: phy: use kzalloc to allocate struct tegra_usb_phy
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RESEND 2/2] usb: host: tegra: Resetting PORT0 based on information received via DT.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] arm: tegra: Add new DT property to USB node.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [RFC PATCH 1/6] Core files for the DWC2 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: Linux USB redirection
  • From: Chirkut Daruwalla <chirkut.daruwalla@xxxxxxxxx>
• RE: [RFC PATCH 1/6] Core files for the DWC2 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• linux-3.7.1: kmemleak reports in comm "usb-storage"?
  • From: Martin Mokrejs <mmokrejs@xxxxxxxxxxxxxxxxxx>
• USB device cannot be reconnected and khubd "blocked for more than 120 seconds"
  • From: Alex Riesen <raa.lkml@xxxxxxxxx>
• Re: simulate Isochronous IN transfers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 07/14] usb: ehci-omap: Instantiate PHY devices if required
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/14] mfd: omap-usb-host: Consolidate OMAP USB-HS platform data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• simulate Isochronous IN transfers
  • From: Dan Clapp <ipswicheg@xxxxxxxxx>
• Re: [PATCH 04/14] usb: phy: nop: Handle power supply regulator for the PHY
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCHv2] USB: select USB_ARCH_HAS_EHCI for MXS
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 07/14] usb: ehci-omap: Instantiate PHY devices if required
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: ehci-hcd compile error
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 07/14] usb: ehci-omap: Instantiate PHY devices if required
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 07/14] usb: ehci-omap: Instantiate PHY devices if required
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Re: how to disable usb hub suspend function
  • From: "gavin.kx" <gavin.kx@xxxxxx>
• Re: Re: how to disable usb hub suspend function
  • From: "gavin.kx" <gavin.kx@xxxxxx>
• Re: how to disable usb hub suspend function
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: how to disable usb hub suspend function
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: ehci-hcd compile error
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v6 1/4] ARM: EXYNOS: Update & move usb-phy types to generic include layer
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v6 2/4] usb: phy: samsung: Add host phy support to samsung-phy driver
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v6 4/4] USB: ohci-exynos: Add phy driver support
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v6 3/4] USB: ehci-s5p: Add phy driver support
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v6 0/4] Adding usb2.0 host-phy support for exynos5250
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH RFC] usb: dwc3: Remove dwc3 dependency on gadget.
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• how to disable usb hub suspend function
  • From: "gavin.kx" <gavin.kx@xxxxxx>
• Re: Linux USB redirection
  • From: Anil Nair <anilcoll90@xxxxxxxxx>
• Re: [PATCH RFC] usb: dwc3: Remove dwc3 dependency on gadget.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v5 2/4] usb: phy: samsung: Add host phy support to samsung-phy driver
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH RFC] usb: dwc3: Remove dwc3 dependency on gadget.
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH v5 2/4] usb: phy: samsung: Add host phy support to samsung-phy driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v5 2/4] usb: phy: samsung: Add host phy support to samsung-phy driver
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• [Resend PATCH v4 09/10] usb: expose usb port's pm qos flags to user space
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [Resend PATCH v4 10/10] usb: add usb_device_allow_power_off() and usb_device_prevent_power_off() function.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [Resend PATCH v4 08/10] usb: add usb port auto power off mechanism
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [Resend PATCH v4 07/10] usb: add runtime pm support for usb port device
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [Resend PATCH v4 06/10] usb: Register usb port's acpi power resources
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [Resend PATCH v4 03/10] USB: Set usb port's DeviceRemovable according acpi information
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [Resend PATCH v4 05/10] usb: Create link files between child device and usb port device.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [Resend PATCH v4 04/10] usb: Add "portX/connect_type" attribute to expose usb port's connect type
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [Resend PATCH v4 02/10] usb: Add driver/usb/core/(port.c,hub.h) files
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [Resend PATCH v4 01/10] PM/Qos: Expose dev_pm_qos_flags symbol
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [Resend PATCH V4 0/10] usb: usb port power off mechanism anc expose usb port connect type
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: ehci-hcd compile error
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH 07/14] usb: ehci-omap: Instantiate PHY devices if required
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 07/14] usb: ehci-omap: Instantiate PHY devices if required
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [BUILD BREAK] usb: gadget: fsl_mxc_udc can't compile on current v3.8-rc3
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• [PATCH 2/2]linux-usb:optimize to match the Huawei USB storage devices and support new switch command
  • From: fangxiaozhi 00110321 <fangxiaozhi@xxxxxxxxxx>
• [PATCH 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: samsung: Add support to set pmu isolation
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [BUILD BREAK] usb: gadget: fsl_mxc_udc can't compile on current v3.8-rc3
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH 1/6] Core files for the DWC2 driver
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH] ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver
  • From: "Freddy" <freddy@xxxxxxxxxxx>
• Re: [PATCH 04/14] usb: phy: nop: Handle power supply regulator for the PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 01/14] mfd: omap-usb-host: Consolidate OMAP USB-HS platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• RE: [BUILD BREAK] usb: gadget: fsl_mxc_udc can't compile on current v3.8-rc3
  • From: Li Yang-R58472 <r58472@xxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: samsung: Add support to set pmu isolation
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [BUILD BREAK] usb: gadget: fsl_mxc_udc can't compile on current v3.8-rc3
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [BUILD BREAK] usb: gadget: fsl_mxc_udc can't compile on current v3.8-rc3
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [BUILD BREAK] usb: gadget: fsl_mxc_udc can't compile on current v3.8-rc3
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver
  • From: Christian Riesch <christian.riesch@xxxxxxxxxx>
• [PATCH] usb: phy: samsung: Add support to set pmu isolation
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: Linux USB redirection
  • From: Abhijit Pawar <abhi.c.pawar@xxxxxxxxx>
• Re: [PATCH 4/8] usb/dwc3: fix isoc END TRANSFER Condition
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH] ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Linux USB redirection
  • From: Anil Nair <anilcoll90@xxxxxxxxx>
• Re: Linux USB redirection
  • From: Chirkut Daruwalla <chirkut.daruwalla@xxxxxxxxx>
• RE: [BUILD BREAK] usb: gadget: fsl_mxc_udc can't compile on current v3.8-rc3
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• RE: [BUILD BREAK] usb: gadget: fsl_mxc_udc can't compile on current v3.8-rc3
  • From: Li Yang-R58472 <r58472@xxxxxxxxxxxxx>
• RE: [PATCH 1/4] ARM: dts: mxs-phy: Change mxs phy clock usage
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] usbnet: allow status interrupt URB to always be active
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: dts: mxs-phy: Change mxs phy clock usage
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [BUILD BREAK] usb: gadget: fsl_mxc_udc can't compile on current v3.8-rc3
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 01/14] mfd: omap-usb-host: Consolidate OMAP USB-HS platform data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Problem with
  • From: Diederick Huijbers ☾ <diederick@xxxxxxxxxxxxxx>
• Re: [PATCH 07/14] usb: ehci-omap: Instantiate PHY devices if required
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ehci-hcd compile error
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ehci-hcd compile error
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: ehci-hcd compile error
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 04/14] usb: phy: nop: Handle power supply regulator for the PHY
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: ehci-hcd compile error
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 00/14] USB: omap-ehci: Move PHY management to PHY driver
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 02/14] usb: phy: Add new API usb_get_phy_from_dev()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 05/14] usb: phy: nop: Handle RESET for the PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 04/14] usb: phy: nop: Handle power supply regulator for the PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 08/14] mfd: omap-usb-host: Remove PHY reset handling code
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 06/14] mfd: omap-usb-host: update nports in platform_data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 01/14] mfd: omap-usb-host: Consolidate OMAP USB-HS platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 09/14] usb: ehci-omap: Remove PHY reset handling code
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 03/14] usb: xceiv: nop: Manage PHY clock
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 10/14] usb: ehci-omap: Remove PHY regulator handling code
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 11/14] ARM: OMAP2+: omap4panda: Provide USB Host's PHY platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 07/14] usb: ehci-omap: Instantiate PHY devices if required
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 13/14] ARM: OMAP2+: omap4panda: Adapt HUB reset to regulator framework
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 14/14] ARM: OMAP2+: omap4panda: Remove irrelevant USB host platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 12/14] ARM: OMAP2+: omap4panda: Adapt HUB power to regulator framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: ehci-hcd compile error
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] CDC_NCM adding support IFF_NOARP for buggy device
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] USB: select USB_ARCH_HAS_EHCI for MXS
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: USB autosuspend vs. URB submission
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: ehci-hcd compile error
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: select USB_ARCH_HAS_EHCI for MXS
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: add find_raw_port_number callback to struct hc_driver()
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• Re: [PATCH 2/2] usb: host: ohci-tmio: fix compile warning
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB autosuspend vs. URB submission
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: add find_raw_port_number callback to struct hc_driver()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB autosuspend vs. URB submission
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: ehci-fsl: fix regression on mpc5121e
  • From: Anatolij Gustschin <agust@xxxxxxx>
• Re: [PATCH 1/2] USB: fsl-mph-dr-of: fix regression on mpc5121e
  • From: Anatolij Gustschin <agust@xxxxxxx>
• Re: [balbi-usb:gadget 13/13] drivers/usb/gadget/m66592-udc.c:1756:1: warning: data definition has no type or storage class
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [BUILD BREAK] usb: gadget: fsl_mxc_udc can't compile on current v3.8-rc3
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [balbi-usb:gadget 13/13] drivers/usb/gadget/m66592-udc.c:1756:1: warning: data definition has no type or storage class
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] CDC_NCM adding support IFF_NOARP for buggy device
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [balbi-usb:gadget 13/13] drivers/usb/gadget/m66592-udc.c:1756:1: warning: data definition has no type or storage class
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• [PATCH] CDC_NCM adding support IFF_NOARP for buggy device
  • From: Wei Shuai <cpuwolf@xxxxxxxxx>
• Re: [PATCH] usb: musb: ux500: use clk_prepare_enable and clk_disable_unprepare
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• Re: [PATCH 1/2] usb: host: imx21: fix compile error
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH RFC] usb: dwc3: Remove dwc3 dependency on gadget.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/3] driver core: add helper macro for platform_driver_probe() boilerplate
  • From: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
• Re: [PATCH 1/2] usb: host: imx21: fix compile error
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] cppi_dma: mark cppi_controller_create() and cppi_pool_init() as '__devinit'
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH 1/2] usb: host: imx21: fix compile error
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/2] usb: host: ohci-tmio: fix compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/8] usb/dwc3: fix isoc END TRANSFER Condition
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• ehci-hcd compile error
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/3] usb/acpi: binding xhci root hub usb port with ACPI
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] usb: musb: Double buffering issues in host mode TX
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [V2 PATCH 00/27] mv-usb fix and enhancement patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] cppi_dma: mark cppi_controller_create() and cppi_pool_init() as '__devinit'
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/8] usb/dwc3: Fix missed isoc
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: musb: ux500: use clk_prepare_enable and clk_disable_unprepare
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• xhci module fails when booting in UEFI mode
  • From: Frederik Himpe <fhimpe@xxxxxxxxx>
• Re: [PATCH 2/8] usb/dwc3: Fix missed isoc
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH 2/8] usb/dwc3: Fix missed isoc
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] uvc: fix race of open and suspend in error case
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [V2 PATCH 00/27] mv-usb fix and enhancement patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [V2 PATCH 25/27] usb: gadget: mv_udc: add device tree support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [V2 PATCH 20/27] usb: gadget: mv_udc: add extern chip support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [V2 PATCH 20/27] usb: gadget: mv_udc: add extern chip support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [V2 PATCH 08/27] usb: gadget: mv_udc: fix the value of tranceiver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [V2 PATCH 02/27] usb: gadget: mv_udc: use devm_xxx for probe
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 1/1]linux-usb:optimize to match the Huawei USB storage devices and support new switch command
  • From: "Fangxiaozhi (Franko)" <fangxiaozhi@xxxxxxxxxx>
• Re: [V2 PATCH 01/27] usb: gadget: mv_udc: use udc_start and udc_stop functions
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: gadget: move the global the_dev variable to their users
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 5/8] usb/dwc3: Fix skip LINK-TRB on ISOC
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [BUILD BREAK] usb: gadget: fsl_mxc_udc can't compile on current v3.8-rc3
  • From: Felipe Balbi <balbi@xxxxxx>