Hi Doug,
On Sat, Jan 12, 2013 at 6:20 AM, Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
> Vivek,
>
> On Fri, Jan 11, 2013 at 4:40 AM, Vivek Gautam <gautamvivek1987@xxxxxxxxx> wrote:
>>>> +#define HOST_CTRL0_REFCLKSEL_MASK (0x3)
>>>> +#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19)
>>>> +#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19)
>>>> +#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19)
>>>> +
>>>> +#define HOST_CTRL0_FSEL_MASK (0x7 << 16)
>>>> +#define HOST_CTRL0_FSEL(_x) ((_x) << 16)
>>>> +#define HOST_CTRL0_FSEL_CLKSEL_50M (0x7)
>>>> +#define HOST_CTRL0_FSEL_CLKSEL_24M (0x5)
>>>> +#define HOST_CTRL0_FSEL_CLKSEL_20M (0x4)
>>>> +#define HOST_CTRL0_FSEL_CLKSEL_19200K (0x3)
>>>> +#define HOST_CTRL0_FSEL_CLKSEL_12M (0x2)
>>>> +#define HOST_CTRL0_FSEL_CLKSEL_10M (0x1)
>>>> +#define HOST_CTRL0_FSEL_CLKSEL_9600K (0x0)
>>>
>>> Add the shifts to the #defines and remove HOST_CTRL0_FSEL(_x). That
>>> makes it match the older phy more closely.
>>>
>> Wouldn't it hamper the readability when shifts are used ??
>> I mean if we have something like this -
>>
>> phyhost |= HOST_CTRL0_FSEL(phyclk)
>>
>> so, if we are using the shifts then
>> phyhost |= (HOST_CTRL0_FSEL_CLKSEL_24M << HOST_CTRL0_FSEL_SHIFT)
>
> I was actually suggesting modifying the #defines like this:
>
> #define HOST_CTRL0_FSEL_SHIFT 16
> #define HOST_CTRL0_FSEL_MASK (0x7 << HOST_CTRL0_FSEL_SHIFT)
> #define HOST_CTRL0_FSEL_CLKSEL_50M (0x7 << HOST_CTRL0_FSEL_SHIFT)
> #define HOST_CTRL0_FSEL_CLKSEL_24M (0x5 << HOST_CTRL0_FSEL_SHIFT)
> #define HOST_CTRL0_FSEL_CLKSEL_20M (0x4 << HOST_CTRL0_FSEL_SHIFT)
> #define HOST_CTRL0_FSEL_CLKSEL_19200K (0x3 << HOST_CTRL0_FSEL_SHIFT)
> #define HOST_CTRL0_FSEL_CLKSEL_12M (0x2 << HOST_CTRL0_FSEL_SHIFT)
> #define HOST_CTRL0_FSEL_CLKSEL_10M (0x1 << HOST_CTRL0_FSEL_SHIFT)
> #define HOST_CTRL0_FSEL_CLKSEL_9600K (0x0 << HOST_CTRL0_FSEL_SHIFT)
>
> ...then the code doesn't need to think about shifts, right?
>
right right, sorry i din't get your point earlier. :-(
this way things will be similar in samsung_usbphy_get_refclk_freq()
across exynos 5 and older SoCs.
Is it fine if we don't use macro for SHIFT, earlier code also doesn't use it.
Can we just do like this ..
#define HOST_CTRL0_FSEL_MASK (0x7 << 16)
#define HOST_CTRL0_FSEL_CLKSEL_50M (0x7 << 16)
#define HOST_CTRL0_FSEL_CLKSEL_24M (0x5 << 16)
#define HOST_CTRL0_FSEL_CLKSEL_20M (0x4 << 16)
#define HOST_CTRL0_FSEL_CLKSEL_19200K (0x3 << 16)
#define HOST_CTRL0_FSEL_CLKSEL_12M (0x2 << 16)
#define HOST_CTRL0_FSEL_CLKSEL_10M (0x1 << 16)
#define HOST_CTRL0_FSEL_CLKSEL_9600K (0x0 << 16)
>
>>>> if (IS_ERR(ref_clk)) {
>>>> dev_err(sphy->dev, "Failed to get reference clock\n");
>>>> return PTR_ERR(ref_clk);
>>>> }
>>>>
>>>> - switch (clk_get_rate(ref_clk)) {
>>>> - case 12 * MHZ:
>>>> - refclk_freq = PHYCLK_CLKSEL_12M;
>>>> - break;
>>>> - case 24 * MHZ:
>>>> - refclk_freq = PHYCLK_CLKSEL_24M;
>>>> - break;
>>>> - case 48 * MHZ:
>>>> - refclk_freq = PHYCLK_CLKSEL_48M;
>>>> - break;
>>>> - default:
>>>> - if (sphy->cpu_type == TYPE_S3C64XX)
>>>> - refclk_freq = PHYCLK_CLKSEL_48M;
>>>> - else
>>>> + if (sphy->cpu_type == TYPE_EXYNOS5250) {
>>>> + /* set clock frequency for PLL */
>>>> + switch (clk_get_rate(ref_clk)) {
>>>> + case 96 * 100000:
>>>
>>> nit: change to 9600 * KHZ to match; below too.
>>>
>> sure.
>>
>>>> + refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_9600K;
>>>
>>> Why |= with 0?
>>>
>> kept this just to keep things look similar :-). will remove this line,
>
> My comment was about keeping things similar. Right now the 5250 code
> has the |= and the non-5250 code doesn't. I don't care which is
> picked but the two sides of the "if" should be symmetric.
>
True, it's good to maintain symmetry in the code.
I shall amend the code as suggested.
> See parts of the patch below.
>
>>>> + break;
>>>> + case 10 * MHZ:
>>>> + refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_10M;
>>>> + break;
>>>> + case 12 * MHZ:
>>>> + refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_12M;
>>>> + break;
>>>> + case 192 * 100000:
>>>> + refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_19200K;
>>>> + break;
>>>> + case 20 * MHZ:
>>>> + refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_20M;
>>>> + break;
>>>> + case 50 * MHZ:
>>>> + refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_50M;
>>>> + break;
>>>> + case 24 * MHZ:
>>>> + default:
>>>> + /* default reference clock */
>>>> + refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_24M;
>>>> + break;
>>>> + }
>>>> + } else {
>>>> + switch (clk_get_rate(ref_clk)) {
>>>> + case 12 * MHZ:
>>>> + refclk_freq = PHYCLK_CLKSEL_12M;
>>>> + break;
>>>> + case 24 * MHZ:
>>>> refclk_freq = PHYCLK_CLKSEL_24M;
>>>> - break;
>>>> + break;
>>>> + case 48 * MHZ:
>>>> + refclk_freq = PHYCLK_CLKSEL_48M;
>>>> + break;
>>>> + default:
>>>> + if (sphy->cpu_type == TYPE_S3C64XX)
>>>> + refclk_freq = PHYCLK_CLKSEL_48M;
>>>> + else
>>>> + refclk_freq = PHYCLK_CLKSEL_24M;
>>>> + break;
>>>> + }
>>>> }
>>>> clk_put(ref_clk);
>>>>
>>>> return refclk_freq;
>>>> }
>
> -Doug
--
Thanks & Regards
Vivek
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
