Re: [PATCH v5 2/4] usb: phy: samsung: Add host phy support to samsung-phy driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Fri, Jan 11, 2013 at 06:10:48PM +0530, Vivek Gautam wrote:
> Hi Doug,
> 
> Sorry!!  for the delayed response.
> 
> 
> On Thu, Dec 20, 2012 at 4:31 AM, Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
> > Vivek,
> >
> > I don't really have a good 10000 foot view about how all of the USB
> > bits fit together, but a few detail-oriented comments below.
> >
> >
> > On Tue, Dec 18, 2012 at 6:43 AM, Vivek Gautam <gautam.vivek@xxxxxxxxxxx> wrote:
> >> This patch adds host phy support to samsung-usbphy.c and
> >> further adds support for samsung's exynos5250 usb-phy.
> >>
> >> Signed-off-by: Praveen Paneri <p.paneri@xxxxxxxxxxx>
> >> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
> >> ---
> >>  .../devicetree/bindings/usb/samsung-usbphy.txt     |   25 +-
> >>  drivers/usb/phy/Kconfig                            |    2 +-
> >>  drivers/usb/phy/samsung-usbphy.c                   |  465 ++++++++++++++++++--
> >>  include/linux/usb/samsung_usb_phy.h                |   13 +
> >>  4 files changed, 454 insertions(+), 51 deletions(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> >> index a7b28b2..2ec5400 100644
> >> --- a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> >> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> >> @@ -1,23 +1,38 @@
> >>  * Samsung's usb phy transceiver
> >>
> >> -The Samsung's phy transceiver is used for controlling usb otg phy for
> >> -s3c-hsotg usb device controller.
> >> +The Samsung's phy transceiver is used for controlling usb phy for
> >> +s3c-hsotg as well as ehci-s5p and ohci-exynos usb controllers
> >> +across Samsung SOCs.
> >>  TODO: Adding the PHY binding with controller(s) according to the under
> >>  developement generic PHY driver.
> >>
> >>  Required properties:
> >> +
> >> +Exynos4210:
> >>  - compatible : should be "samsung,exynos4210-usbphy"
> >>  - reg : base physical address of the phy registers and length of memory mapped
> >>         region.
> >>
> >> +Exynos5250:
> >> +- compatible : should be "samsung,exynos5250-usbphy"
> >> +- reg : base physical address of the phy registers and length of memory mapped
> >> +       region.
> >> +
> >>  Optional properties:
> >>  - samsung,usb-phyhandle : should point to usb-phyhandle sub-node which provides
> >>                         binding data to enable/disable device PHY handled by
> >> -                       PMU register.
> >> +                       PMU register; or to configure usb2.0 phy handled by
> >> +                       SYSREG.
> >>
> >>                         Required properties:
> >>                         - compatible : should be "samsung,usbdev-phyctrl" for
> >> -                                       DEVICE type phy.
> >> +                                      DEVICE type phy; or
> >> +                                      should be "samsung,usbhost-phyctrl" for
> >> +                                      HOST type phy; or
> >> +                                      should be "samsung,usb-phycfg" for
> >> +                                      USB2.0 PHY_CFG.
> >>                         - samsung,phyhandle-reg: base physical address of
> >> -                                               PHY_CONTROL register in PMU.
> >> +                                                PHY_CONTROL register in PMU;
> >> +                                                or USB2.0 PHY_CFG register
> >> +                                                in SYSREG.
> >>  - samsung,enable-mask : should be '1'
> >> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> >> index 17ad743..13c0eaf 100644
> >> --- a/drivers/usb/phy/Kconfig
> >> +++ b/drivers/usb/phy/Kconfig
> >> @@ -47,7 +47,7 @@ config USB_RCAR_PHY
> >>
> >>  config SAMSUNG_USBPHY
> >>         bool "Samsung USB PHY controller Driver"
> >> -       depends on USB_S3C_HSOTG
> >> +       depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS
> >>         select USB_OTG_UTILS
> >>         help
> >>           Enable this to support Samsung USB phy controller for samsung
> >> diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
> >> index 4ceabe3..621348a 100644
> >> --- a/drivers/usb/phy/samsung-usbphy.c
> >> +++ b/drivers/usb/phy/samsung-usbphy.c
> >> @@ -5,7 +5,8 @@
> >>   *
> >>   * Author: Praveen Paneri <p.paneri@xxxxxxxxxxx>
> >>   *
> >> - * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
> >> + * Samsung USB-PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
> >> + * OHCI-EXYNOS controllers.
> >>   *
> >>   * This program is free software; you can redistribute it and/or modify
> >>   * it under the terms of the GNU General Public License version 2 as
> >> @@ -24,7 +25,7 @@
> >>  #include <linux/err.h>
> >>  #include <linux/io.h>
> >>  #include <linux/of.h>
> >> -#include <linux/usb/otg.h>
> >> +#include <linux/usb/samsung_usb_phy.h>
> >>  #include <linux/platform_data/samsung-usbphy.h>
> >>
> >>  /* Register definitions */
> >> @@ -56,6 +57,103 @@
> >>  #define RSTCON_HLINK_SWRST                     (0x1 << 1)
> >>  #define RSTCON_SWRST                           (0x1 << 0)
> >>
> >> +/* EXYNOS5 */
> >> +#define EXYNOS5_PHY_HOST_CTRL0                 (0x00)
> >> +
> >> +#define HOST_CTRL0_PHYSWRSTALL                 (0x1 << 31)
> >> +
> >> +#define HOST_CTRL0_REFCLKSEL_MASK              (0x3)
> >> +#define HOST_CTRL0_REFCLKSEL_XTAL              (0x0 << 19)
> >> +#define HOST_CTRL0_REFCLKSEL_EXTL              (0x1 << 19)
> >> +#define HOST_CTRL0_REFCLKSEL_CLKCORE           (0x2 << 19)
> >> +
> >> +#define HOST_CTRL0_FSEL_MASK                   (0x7 << 16)
> >> +#define HOST_CTRL0_FSEL(_x)                    ((_x) << 16)
> >> +#define HOST_CTRL0_FSEL_CLKSEL_50M             (0x7)
> >> +#define HOST_CTRL0_FSEL_CLKSEL_24M             (0x5)
> >> +#define HOST_CTRL0_FSEL_CLKSEL_20M             (0x4)
> >> +#define HOST_CTRL0_FSEL_CLKSEL_19200K          (0x3)
> >> +#define HOST_CTRL0_FSEL_CLKSEL_12M             (0x2)
> >> +#define HOST_CTRL0_FSEL_CLKSEL_10M             (0x1)
> >> +#define HOST_CTRL0_FSEL_CLKSEL_9600K           (0x0)
> >
> > Add the shifts to the #defines and remove HOST_CTRL0_FSEL(_x).  That
> > makes it match the older phy more closely.
> >
> Wouldn't it hamper the readability when shifts are used ??
> I mean if we have something like this -
> 
> phyhost |= HOST_CTRL0_FSEL(phyclk)

this one looks better to my eyes.

> >> +                       refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_9600K;
> >
> > Why |= with 0?
> >
> kept this just to keep things look similar :-). will remove this line,

I would rather keep it. Compiler will optimize it out anyway and it
makes things logical, I mean, we can see that you're telling IP that
reference clock is 9600KHz.

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux