RE: [PATCH V2 1/8] usb/dwc3: Enable usb2 LPM only when connected as usb2.0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: Pratyush Anand [mailto:pratyush.anand@xxxxxx]
> Sent: Monday, January 14, 2013 2:30 AM
> 
> Synopsys says:
> The HIRD Threshold field must be set to ‘0’ when the device core is
> operating in super speed mode.
> 
> This patch implements above statement.
> 
> Signed-off-by: Pratyush Anand <pratyush.anand@xxxxxx>
> ---
>  drivers/usb/dwc3/gadget.c |   31 ++++++++++++++++++-------------
>  1 files changed, 18 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index c9c56a1..74d2496 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -2156,6 +2156,23 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
>  		break;
>  	}
> 
> +	/* Enable USB2 LPM Capability */
> +
> +	if ((dwc->revision > DWC3_REVISION_194A)
> +			&& (speed != DWC3_DCFG_SUPERSPEED)) {
> +		reg = dwc3_readl(dwc->regs, DWC3_DCFG);
> +		reg |= DWC3_DCFG_LPM_CAP;
> +		dwc3_writel(dwc->regs, DWC3_DCFG, reg);
> +
> +		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
> +		reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN);
> +
> +		/* TODO: This should be configurable */
> +		reg |= DWC3_DCTL_HIRD_THRES(28);
> +
> +		dwc3_writel(dwc->regs, DWC3_DCTL, reg);
> +	}
> +
>  	/* Recent versions support automatic phy suspend and don't need this */
>  	if (dwc->revision < DWC3_REVISION_194A) {
>  		/* Suspend unneeded PHY */
> @@ -2462,20 +2479,8 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
>  			DWC3_DEVTEN_DISCONNEVTEN);
>  	dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
> 
> -	/* Enable USB2 LPM and automatic phy suspend only on recent versions */
> +	/* automatic phy suspend only on recent versions */
>  	if (dwc->revision >= DWC3_REVISION_194A) {
> -		reg = dwc3_readl(dwc->regs, DWC3_DCFG);
> -		reg |= DWC3_DCFG_LPM_CAP;
> -		dwc3_writel(dwc->regs, DWC3_DCFG, reg);
> -
> -		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
> -		reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN);
> -
> -		/* TODO: This should be configurable */
> -		reg |= DWC3_DCTL_HIRD_THRES(28);
> -
> -		dwc3_writel(dwc->regs, DWC3_DCTL, reg);
> -
>  		dwc3_gadget_usb2_phy_suspend(dwc, true);
>  		dwc3_gadget_usb3_phy_suspend(dwc, true);
>  	}

Acked-by: Paul Zimmerman <paulz@xxxxxxxxxxxx>

��.n��������+%������w��{.n�����{���)��jg��������ݢj����G�������j:+v���w�m������w�������h�����٥



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux