Re: [PATCH] ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver

[Christian Riesch <christian.riesch@xxxxxxxxxx>]

Hi,

On 2013-01-11 03:45, Ming Lei wrote:
> Cc netdev and usb lists.
>
>
> On Fri, Jan 11, 2013 at 9:17 AM,  <freddy@xxxxxxxxxxx> wrote:
> > From: Freddy Xin <freddy@xxxxxxxxxxx>
> >
> > This patch adds a driver for ASIX's AX88179 family of USB 3.0/2.0
> > to gigabit ethernet adapters. It's based on the AX88xxx driver but
> > the usb commands used to access registers for AX88179 are completely different.
> > This driver had been verified on x86 system with AX88179/AX88178A and
> > Sitcomm LN-032 USB dongles.
> >
> > Signed-off-by: Freddy Xin <freddy@xxxxxxxxxxx>
> > ---
> >   drivers/net/usb/Kconfig        |   18 +
> >   drivers/net/usb/Makefile       |    1 +
> >   drivers/net/usb/ax88179_178a.c | 1457 ++++++++++++++++++++++++++++++++++++++++
> >   3 files changed, 1476 insertions(+)
> >   create mode 100644 drivers/net/usb/ax88179_178a.c

[...]

> > diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
> > new file mode 100644
> > index 0000000..47504ea
> > --- /dev/null
> > +++ b/drivers/net/usb/ax88179_178a.c
[...]
> > +static int ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
> > +                           u16 size, void *data)
> > +{
> > +       int ret;
> > +       ret = usbnet_read_cmd(dev, cmd,
> > +                              USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
> > +                              value, index, data, size);
> > +
> > +       if (ret != size && ret >= 0)
> > +               return -EINVAL;
> > +       return ret;
> > +}
> > +
> > +static int ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
> > +                            u16 size, void *data)
> > +{
> > +       return usbnet_write_cmd(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR
> > +                               | USB_RECIP_DEVICE, value, index, data, size);
> > +}
> > +
> > +static void
> > +ax88179_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
> > +                                   u16 size, void *data)
> > +{
> > +       usbnet_write_cmd_async(dev, cmd,
> > +                              USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
> > +                              value, index, data, size);
> > +}
> > +

ax88179_read_cmd, ax88179_write_cmd, and ax88179_write_cmd_async 
duplicate code from asix_common.c.

[...]

> > +static int ax88179_get_eeprom(struct net_device *net,
> > +                             struct ethtool_eeprom *eeprom, u8 *data)
> > +{
> > +       struct usbnet *dev = netdev_priv(net);
> > +       u16 *ebuf = (u16 *)data;
> > +       int i;
> > +
> > +       /* Crude hack to ensure that we don't overwrite memory
> > +        * if an odd length is supplied

Have a look at asix_get_eeprom() in asix_common.c for a better 
implementation. There is also code for programming the eeprom 
(asix_set_eeprom in asix_common.c), can this be used for the 
AX88179/178A as well?

Regards, Christian

> > +        */
> > +       if (eeprom->len % 2)
> > +               return -EINVAL;
> > +
> > +       /* ax8817x returns 2 bytes from eeprom on read */
> > +       for (i = 0; i < eeprom->len / 2; i++) {
> > +               if (ax88179_read_cmd(dev, AX_ACCESS_EEPROM,
> > +                       eeprom->offset + i, 1, 2, &ebuf[i]) < 0)
> > +                       return -EINVAL;
> > +       }
> > +       return 0;
> > +}
> > +

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html