Linux Tegra Development
[Prev Page][Next Page]
- [PATCH 0/3] drm/tegra: Use standard suffix for hotplug detect GPIO property
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH] pinctrl: as3722: fix handling of GPIO invert bit
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
- [PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)
- From: Brian Norris <computersforpeace@xxxxxxxxx>
- [PATCH v2 1/3] mmc: tegra: disable UHS modes
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- Re: [PATCH v2 3/3] ARM: tegra: fix Venice2 SD card VQMMC supply
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH v2 0/3] Tegra SD/MMC fixes
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: make Venice's +3.3V_RUN regulator always on
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: fix Jetson TK1 SD card supply
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH v2 3/3] ARM: tegra: fix Venice2 SD card VQMMC supply
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- [PATCH v2 2/3] mmc: tegra: fix reporting of base clock frequency
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- [PATCH v2] pinctrl: as3722: fix handling of GPIO invert bit
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- Re: [PATCH] pinctrl: as3722: fix handling of GPIO invert bit
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- Re: [PATCH 4/4] ARM: tegra: fix Venice2 VQMMC regulators
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- Re: [PATCH] drm/tegra: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH] clk: tegra124: Enable hda to hdmi clocks
- From: Dylan Reid <dgreid@xxxxxxxxxxxx>
- Re: [cbootimage PATCH V3 0/7] Re-enable jtag function for Tegra124
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] ARM: tegra: fix Jetson TK1 SD card supply
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: define Jetson TK1 regulators
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Re: [PATCH] pinctrl: as3722: fix handling of GPIO invert bit
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: make Venice's +3.3V_RUN regulator always on
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 4/4] ARM: tegra: fix Venice2 VQMMC regulators
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] clk: tegra124: Enable hda to hdmi clocks
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] clk: tegra124: Enable hda to hdmi clocks
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: define Jetson TK1 regulators
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- Re: [PATCH 11/12] drm/nouveau: support GK20A in nouveau_accel_init()
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- RE: [cbootimage PATCH V3 0/7] Re-enable jtag function for Tegra124
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- [PATCH] pinctrl: as3722: fix handling of GPIO invert bit
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: make Venice's +3.3V_RUN regulator always on
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- Re: [PATCH 4/4] ARM: tegra: fix Venice2 VQMMC regulators
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: define Jetson TK1 regulators
- From: Andrew Bresticker <abrestic@xxxxxxxxxx>
- Re: [PATCH 3/4] mmc: sdhci: defer probing on regulator_get_optional() failures
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- [PATCH] ARM: tegra: make Venice's +3.3V_RUN regulator always on
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] ARM: multi_v7: enable AT24C EEPROM driver
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: define Jetson TK1 regulators
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: tegra: add Jetson TK1 device tree
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 3/4] mmc: sdhci: defer probing on regulator_get_optional() failures
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 3/4] mmc: sdhci: defer probing on regulator_get_optional() failures
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- Re: [PATCH 3/4] mmc: sdhci: defer probing on regulator_get_optional() failures
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- Re: [PATCH 2/4] mmc: tegra: fix reporting of base clock frequency
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- Re: [PATCH 4/4] ARM: tegra: fix Venice2 VQMMC regulators
- From: Chris Ball <chris@xxxxxxxxxx>
- Re: [PATCH 3/4] mmc: sdhci: defer probing on regulator_get_optional() failures
- From: Tim Kryger <tim.kryger@xxxxxxxxxx>
- Re: [PATCH 4/4] ARM: tegra: fix Venice2 VQMMC regulators
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Re: [PATCH 3/4] mmc: sdhci: defer probing on regulator_get_optional() failures
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 2/4] mmc: tegra: fix reporting of base clock frequency
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] clk: tegra124: Enable hda to hdmi clocks
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [cbootimage PATCH V3 0/7] Re-enable jtag function for Tegra124
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [cbootimage PATCH V3 0/7] Re-enable jtag function for Tegra124
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] pinctrl: tegra: add missing kerneldoc
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH V2 1/4] pinctrl: tegra: remove redundant data table fields
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 1/4] pinctrl: tegra: remove redundant data table fields
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] USB: EHCI: tegra: set txfill_tuning
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/4] pinctrl: tegra: reduce size of data table fields
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
- Re: [PATCH 2/4] pinctrl: tegra: remove fsafe from data tables
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
- Re: [PATCH 1/4] pinctrl: tegra: remove redundant data table fields
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
- Re: [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH 02/12] drm/nouveau/timer: skip calibration on GK20A
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH 3/4] mmc: sdhci: defer probing on regulator_get_optional() failures
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH] USB: EHCI: tegra: set txfill_tuning
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- [PATCH 3/4] mmc: sdhci: defer probing on regulator_get_optional() failures
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- [PATCH 1/4] mmc: tegra: disable UHS modes
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- [PATCH 4/4] ARM: tegra: fix Venice2 VQMMC regulators
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- [PATCH 2/4] mmc: tegra: fix reporting of base clock frequency
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- [PATCH 0/4] Tegra SD/MMC fixes
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- [PATCH] ARM: tegra: define Jetson TK1 regulators
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 4/4] pinctrl: tegra: print better error messages
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 2/4] pinctrl: tegra: remove fsafe from data tables
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 3/4] pinctrl: tegra: reduce size of data table fields
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 1/4] pinctrl: tegra: remove redundant data table fields
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] USB: EHCI: tegra: set txfill_tuning
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH V2] gpu: host1x: handle the correct # of syncpt regs
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH V2] gpu: host1x: handle the correct # of syncpt regs
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 1/3] ARM: tegra: remove UART5/UARTE from tegra124.dtsi
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: Oops on Tegra30 with CPU Process: 1
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: Oops on Tegra30 with CPU Process: 1
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [v2] media: soc-camera: OF cameras
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [v2] media: soc-camera: OF cameras
- From: Bryan Wu <cooloney@xxxxxxxxx>
- Re: [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Srikanth Thokala <sriku.linux@xxxxxxxxx>
- Re: [PATCH 02/12] drm/nouveau/timer: skip calibration on GK20A
- From: Ben Skeggs <skeggsb@xxxxxxxxx>
- Re: [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Srikanth Thokala <sriku.linux@xxxxxxxxx>
- Re: Oops on Tegra30 with CPU Process: 1
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] drm/tegra: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [cbootimage PATCH V3 7/7] Add update BCT configs feature
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- [cbootimage PATCH V3 6/7] Add Tegra124 bct data access for jtag control and chip uid
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- [cbootimage PATCH V3 5/7] Use block_size and page_size tokens when dump BCT data
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- [cbootimage PATCH V3 4/7] Add token_supported function
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- [cbootimage PATCH V3 3/7] Accept void pointer as input data type for get/set_value functions
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- [cbootimage PATCH V3 2/7] Add page_size validation when setting page_size value
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- [cbootimage PATCH V3 1/7] Add format functions to express BCT and bootloader data value
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- [cbootimage PATCH V3 0/7] Re-enable jtag function for Tegra124
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- Re: [v2] media: soc-camera: OF cameras
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH] drm/tegra: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
- From: Duan Jiong <duanj.fnst@xxxxxxxxxxxxxx>
- [PATCH] ARM: tegra: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
- From: Duan Jiong <duanj.fnst@xxxxxxxxxxxxxx>
- Re: [PATCH 02/12] drm/nouveau/timer: skip calibration on GK20A
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCHv3 0/5] net: rfkill: gpio: cleanup and a few new acpi ids
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCH 02/12] drm/nouveau/timer: skip calibration on GK20A
- From: Ben Skeggs <skeggsb@xxxxxxxxx>
- Re: [PATCHv3 0/5] net: rfkill: gpio: cleanup and a few new acpi ids
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [v2] media: soc-camera: OF cameras
- From: Josh Wu <josh.wu@xxxxxxxxx>
- Re: [PATCH 02/12] drm/nouveau/timer: skip calibration on GK20A
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH V3 4/5] mfd: palmas: support IRQ inversion at the board level
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH] tegrarcm: Version 1.6
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [v2] media: soc-camera: OF cameras
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- [PATCH] tegrarcm: Version 1.6
- From: Allen Martin <amartin@xxxxxxxxxx>
- Re: [PATCHv3 5/5] net: rfkill: gpio: hard-code the gpio names
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCHv3 2/5] net: rfkill: gpio: remove unused and obsolete platform parameters
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH V3 4/5] mfd: palmas: support IRQ inversion at the board level
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- RE: [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- RE: [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: [PATCH V3 4/5] mfd: palmas: support IRQ inversion at the board level
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH V3 4/5] mfd: palmas: support IRQ inversion at the board level
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH 2/2] ALSA: hda - Add driver for Tegra SoC HDA
- From: Dylan Reid <dgreid@xxxxxxxxxxxx>
- Re: [PATCH 2/2] ALSA: hda - Add driver for Tegra SoC HDA
- From: Dylan Reid <dgreid@xxxxxxxxxxxx>
- [PATCH v2 2/2] ALSA: hda - Add driver for Tegra SoC HDA
- From: Dylan Reid <dgreid@xxxxxxxxxxxx>
- [PATCH v2 1/2] ALSA: hda/hdmi - Add Nvidia Tegra124 HDMI support
- From: Dylan Reid <dgreid@xxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCHv3 0/5] net: rfkill: gpio: cleanup and a few new acpi ids
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 1/2] usb: rename 'phy' field of 'struct usb_hcd' to 'transceiver'
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] ALSA: hda - Add driver for Tegra SoC HDA
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCHv3 0/5] net: rfkill: gpio: cleanup and a few new acpi ids
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] ALSA: hda - Add driver for Tegra SoC HDA
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH 2/2] ALSA: hda - Add driver for Tegra SoC HDA
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 2/2] ALSA: hda - Add driver for Tegra SoC HDA
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [v2] media: soc-camera: OF cameras
- From: Bryan Wu <cooloney@xxxxxxxxx>
- Re: [cbootimage PATCH V2 5/5] Add update BCT configs feature
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [cbootimage PATCH V2 4/5] Add Tegra124 bct data access for jtag control and chip uid
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [RFC 3/5] PCI: tegra: Implement accurate power supply scheme
- From: Thierry Reding <treding@xxxxxxxxxx>
- Re: [RFC 2/5] ARM: tegra: Add new PCIe regulator properties
- From: Thierry Reding <treding@xxxxxxxxxx>
- Re: [cbootimage PATCH V2 3/5] Add token_supported function
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [RFC 1/5] PCI: tegra: Overhaul regulator usage
- From: Thierry Reding <treding@xxxxxxxxxx>
- Re: [cbootimage PATCH V2 2/5] Accept void pointer as input data type for get/set_value functions
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 2/2] ALSA: hda - Add driver for Tegra SoC HDA
- From: Dylan Reid <dgreid@xxxxxxxxxxxx>
- Re: [RFC 0/5] PCI: tegra: Overhaul regulator usage
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [RFC 3/5] PCI: tegra: Implement accurate power supply scheme
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] clk: tegra124: Enable hda to hdmi clocks
- From: Dylan Reid <dgreid@xxxxxxxxxxxx>
- Re: [RFC 2/5] ARM: tegra: Add new PCIe regulator properties
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [RFC 1/5] PCI: tegra: Overhaul regulator usage
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 1/2] ALSA: hda/hdmi - Add Nvidia Tegra124 HDMI support
- From: Dylan Reid <dgreid@xxxxxxxxxxxx>
- Re: Tegra30: Unknown SKU 177
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Oops on Tegra30 with CPU Process: 1
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [cbootimage PATCH V2 5/5] Add update BCT configs feature
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- [cbootimage PATCH V2 4/5] Add Tegra124 bct data access for jtag control and chip uid
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- [cbootimage PATCH V2 3/5] Add token_supported function
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- [cbootimage PATCH V2 2/5] Accept void pointer as input data type for get/set_value functions
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- [cbootimage PATCH V2 1/5] Add format functions to express BCT and bootloader data value
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- [cbootimage PATCH V2 0/5] Re-enable jtag function for Tegra124
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- Tegra30: Unknown SKU 177
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- Re: [PATCHv3 0/5] net: rfkill: gpio: cleanup and a few new acpi ids
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH] ARM: tegra: remove TEGRA_EMC_SCALING_ENABLE
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH V2] gpu: host1x: handle the correct # of syncpt regs
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/3] clk: tegra: Fix PLLE programming
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- Re: [PATCH v2 6/6] PCI: designware: use new OF interrupt mapping when possible
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH V2] gpu: host1x: handle the correct # of syncpt regs
- From: Terje Bergström <tbergstrom@xxxxxxxxxx>
- Re: [PATCH V2] gpu: host1x: handle the correct # of syncpt regs
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v2 6/6] PCI: designware: use new OF interrupt mapping when possible
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH V2] gpu: host1x: handle the correct # of syncpt regs
- From: Terje Bergström <tbergstrom@xxxxxxxxxx>
- Re: [PATCH V2] gpu: host1x: handle the correct # of syncpt regs
- From: Terje Bergström <tbergstrom@xxxxxxxxxx>
- Re: [PATCH V2] gpu: host1x: handle the correct # of syncpt regs
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH] ARM: tegra: remove TEGRA_EMC_SCALING_ENABLE
- From: Paul Bolle <pebolle@xxxxxxxxxx>
- [PATCH V2] gpu: host1x: handle the correct # of syncpt regs
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2 6/6] PCI: designware: use new OF interrupt mapping when possible
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Re: [PATCH v2 6/6] PCI: designware: use new OF interrupt mapping when possible
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Re: [PATCH v2 3/6] PCI: rcar: use new OF interrupt mapping when possible
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Re: [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Re: [PATCH v2 1/3] clk: tegra: Fix PLLE programming
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [RFC 2/5] ARM: tegra: Add new PCIe regulator properties
- From: Thierry Reding <treding@xxxxxxxxxx>
- [RFC 0/5] PCI: tegra: Overhaul regulator usage
- From: Thierry Reding <treding@xxxxxxxxxx>
- [RFC 4/5] PCI: tegra: Remove deprecated power supply properties
- From: Thierry Reding <treding@xxxxxxxxxx>
- [RFC 5/5] ARM: tegra: Remove legacy PCIe power supply properties
- From: Thierry Reding <treding@xxxxxxxxxx>
- [RFC 3/5] PCI: tegra: Implement accurate power supply scheme
- From: Thierry Reding <treding@xxxxxxxxxx>
- [RFC 1/5] PCI: tegra: Overhaul regulator usage
- From: Thierry Reding <treding@xxxxxxxxxx>
- [PATCH v2 3/3] clk: tegra: Fix enabling of PLLE
- From: Thierry Reding <treding@xxxxxxxxxx>
- [PATCH v2 1/3] clk: tegra: Fix PLLE programming
- From: Thierry Reding <treding@xxxxxxxxxx>
- [PATCH v2 2/3] clk: tegra: Introduce divider mask and shift helpers
- From: Thierry Reding <treding@xxxxxxxxxx>
- Re: [PATCH] gpu: host1x: handle the correct # of syncpt regs
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [GIT PULL] drm/tegra: Changes for v3.15-rc1
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [cbootimage-configs PATCH] Image dependency generator cleanups
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] gpu: host1x: handle the correct # of syncpt regs
- From: Terje Bergström <tbergstrom@xxxxxxxxxx>
- Re: [Nouveau] [PATCH 11/12] drm/nouveau: support GK20A in nouveau_accel_init()
- From: Ben Skeggs <skeggsb@xxxxxxxxx>
- Re: [PATCH 10/12] drm/nouveau/graph: add GK20A support
- From: Ben Skeggs <skeggsb@xxxxxxxxx>
- Tegra baseline test results for v3.14
- From: Paul Walmsley <pwalmsley@xxxxxxxxxx>
- Re: [tegrarcm PATCH 1/1] tegrarcm: Add odm production secure mode support
- From: Allen Martin <amartin@xxxxxxxxxx>
- [cbootimage-configs PATCH] Image dependency generator cleanups
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [tegrarcm PATCH 1/1] tegrarcm: Add odm production secure mode support
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [Nouveau] [PATCH 11/12] drm/nouveau: support GK20A in nouveau_accel_init()
- From: Ilia Mirkin <imirkin@xxxxxxxxxxxx>
- Re: [Nouveau] [PATCH 06/12] drm/nouveau/ibus: add GK20A support
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [Nouveau] [PATCH 12/12] drm/nouveau: support for probing GK20A
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [Nouveau] [PATCH 06/12] drm/nouveau/ibus: add GK20A support
- From: Ilia Mirkin <imirkin@xxxxxxxxxxxx>
- Re: [PATCH 11/12] drm/nouveau: support GK20A in nouveau_accel_init()
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH 10/12] drm/nouveau/graph: add GK20A support
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [Nouveau] [PATCH 09/12] drm/nouveau/graph: pad firmware code at load time
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH 08/12] drm/nouveau/graph: enable when using external firmware
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH 06/12] drm/nouveau/ibus: add GK20A support
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH 04/12] drm/nouveau/bar/nvc0: support chips without BAR3
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCHv3 0/5] net: rfkill: gpio: cleanup and a few new acpi ids
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH] clk: tegra: Fix PLLE programming
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- Re: [PATCH 2/3] clk: tegra: remove non-existent clocks
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- [tegrarcm PATCH 1/1] tegrarcm: Add odm production secure mode support
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- Re: [RFC 2/2] mmc: use SD/MMC host ID for block device name ID
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [RFC 2/2] mmc: use SD/MMC host ID for block device name ID
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [RFC 2/2] mmc: use SD/MMC host ID for block device name ID
- [RFC 1/2] mmc: read mmc alias from device tree
- [RFC 0/2] fixed order for mmc devices/mmc block devices
- [PATCH 1/3] ARM: tegra: remove UART5/UARTE from tegra124.dtsi
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 3/3] dt: tegra: remove non-existent clock IDs
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 2/3] clk: tegra: remove non-existent clocks
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] gpu: host1x: handle the correct # of syncpt regs
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCHv3 2/5] net: rfkill: gpio: remove unused and obsolete platform parameters
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCHv3 1/5] ARM: tegra: remove obsolete gpio entries
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCHv3 3/5] net: rfkill: gpio: add ACPI ID for GPS module on Lenovo Miix2
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCHv3 5/5] net: rfkill: gpio: hard-code the gpio names
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCHv3 4/5] net: rfkill: gpio: add ACPI IDs for a Broadcom bluetooth chip
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCHv3 0/5] net: rfkill: gpio: cleanup and a few new acpi ids
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH] clk: tegra: Fix PLLE programming
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH] clk: tegra: Fix PLLE programming
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] clk: tegra: Fix PLLE programming
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 49/75] ARM: l2c: fix register naming
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 49/75] ARM: l2c: fix register naming
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 49/75] ARM: l2c: fix register naming
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [STLinux Kernel] [PATCH 49/75] ARM: l2c: fix register naming
- From: Maxime Coquelin <maxime.coquelin@xxxxxx>
- Re: [PATCH 51/75] ARM: l2c: remove platforms/SoCs setting early BRESP
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 49/75] ARM: l2c: fix register naming
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 49/75] ARM: l2c: fix register naming
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 0/6] PCI irq mapping fixes and cleanups
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 49/75] ARM: l2c: fix register naming
- From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
- [PATCH 51/75] ARM: l2c: remove platforms/SoCs setting early BRESP
- From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
- [PATCH 52/75] ARM: l2c: tegra: remove associativity and way size from aux_ctrl
- From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
- Re: [PATCH 00/17] i2c: deprecate class based instantiation for embedded I2C drivers
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 00/12] drm/nouveau: support for GK20A, cont'd
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [flasher PATCH] Add support for Jetson TK1 board
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [cbootimage-configs PATCH] Jetson TK1 board support
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: tegra: enable fhandle in tegra_defconfig
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] ARM: update multi_v7_defconfig for Tegra
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] ARM: tegra: fix board DT pinmux setup
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 1/2] ARM: tegra: enable fhandle in tegra_defconfig
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: JTAG debugging the linux kernel on tegra3 platforms
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- JTAG debugging the linux kernel on tegra3 platforms
- From: Alexander Oh <oh_alexander@xxxxxxxxx>
- Re: [PATCH 00/12] drm/nouveau: support for GK20A, cont'd
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH 00/12] drm/nouveau: support for GK20A, cont'd
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH 11/12] drm/nouveau: support GK20A in nouveau_accel_init()
- From: Ben Skeggs <skeggsb@xxxxxxxxx>
- Re: [Nouveau] [PATCH 12/12] drm/nouveau: support for probing GK20A
- From: Ben Skeggs <skeggsb@xxxxxxxxx>
- Re: [PATCH 10/12] drm/nouveau/graph: add GK20A support
- From: Ben Skeggs <skeggsb@xxxxxxxxx>
- Re: [Nouveau] [PATCH 09/12] drm/nouveau/graph: pad firmware code at load time
- From: Ben Skeggs <skeggsb@xxxxxxxxx>
- Re: [PATCH 08/12] drm/nouveau/graph: enable when using external firmware
- From: Ben Skeggs <skeggsb@xxxxxxxxx>
- Re: [Nouveau] [PATCH 03/12] drm/nouveau/bar: only ioremap BAR3 if it exists
- From: Ben Skeggs <skeggsb@xxxxxxxxx>
- Re: [PATCH 02/12] drm/nouveau/timer: skip calibration on GK20A
- From: Ben Skeggs <skeggsb@xxxxxxxxx>
- [PATCH 2/2] ARM: enable fhandle in multi_v7_defconfig
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH 1/2] ARM: tegra: enable fhandle in tegra_defconfig
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- Tegra baseline test results for v3.14-rc8
- From: Paul Walmsley <pwalmsley@xxxxxxxxxx>
- Re: [PATCH v3] ASOC: tegra: move AC97 clock handling to the machine driver
- From: Mark Brown <broonie@xxxxxxxxxx>
- [cbootimage-configs PATCH] Jetson TK1 board support
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 2/2] ARM: tegra: enable AT24C EEPROM driver
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 1/2] ARM: tegra: add Jetson TK1 device tree
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [flasher PATCH] Add support for Jetson TK1 board
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 12/12] drm/nouveau: support for probing GK20A
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 11/12] drm/nouveau: support GK20A in nouveau_accel_init()
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 09/12] drm/nouveau/graph: pad firmware code at load time
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 08/12] drm/nouveau/graph: enable when using external firmware
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 06/12] drm/nouveau/ibus: add GK20A support
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 05/12] drm/nouveau/fifo: add GK20A support
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 03/12] drm/nouveau/bar: only ioremap BAR3 if it exists
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 04/12] drm/nouveau/bar/nvc0: support chips without BAR3
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 02/12] drm/nouveau/timer: skip calibration on GK20A
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 01/12] drm/nouveau: fix missing newline
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 00/12] drm/nouveau: support for GK20A, cont'd
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 01/12] drm/nouveau: fix missing newline
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH 02/12] drm/nouveau/timer: skip calibration on GK20A
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH 03/12] drm/nouveau/bar: only ioremap BAR3 if it exists
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH 05/12] drm/nouveau/fifo: add GK20A support
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH 07/12] drm/nouveau/fb: add GK20A support
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH 06/12] drm/nouveau/ibus: add GK20A support
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH 08/12] drm/nouveau/graph: enable when using external firmware
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH 10/12] drm/nouveau/graph: add GK20A support
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH 11/12] drm/nouveau: support GK20A in nouveau_accel_init()
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH 12/12] drm/nouveau: support for probing GK20A
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH 09/12] drm/nouveau/graph: pad firmware code at load time
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH 04/12] drm/nouveau/bar/nvc0: support chips without BAR3
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH 00/12] drm/nouveau: support for GK20A, cont'd
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH] ARM: update multi_v7_defconfig for Tegra
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [cbootimage PATCH 2/2] Add update BCT configs feature
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [cbootimage PATCH 1/2] Add Tegra124 bct data access for jtag control and chip uid
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [cbootimage PATCH 1/2] Add Tegra124 bct data access for jtag control and chip uid
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [cbootimage PATCH 2/2] Add update BCT configs feature
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- [cbootimage PATCH 1/2] Add Tegra124 bct data access for jtag control and chip uid
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- [cbootimage PATCH 0/2] Re-enable jtag function for Tegra124
- From: Penny Chiu <pchiu@xxxxxxxxxx>
- [PATCH] ARM: tegra: fix board DT pinmux setup
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [GIT PULL 5/5] ARM: tegra: defconfig updates for 3.15
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: fix Dalmore pinctrl configuration
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [GIT PULL 5/5] ARM: tegra: defconfig updates for 3.15
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [GIT PULL 4/5] ARM: tegra: device tree changes for 3.15
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [GIT PULL 3/5] ARM: tegra: core SoC changes for 3.15
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [GIT PULL 2/5] ARM: tegra: driver changes for 3.15
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [GIT PULL 1/5] ARM: tegra: Trusted Foundations work for 3.15
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [PATCH 62/62] ARM: tegra: make debug_ll code build for ARMv6
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v2] ASoC: tegra: Use flat regcache.
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 62/62] ARM: tegra: make debug_ll code build for ARMv6
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 62/62] ARM: tegra: make debug_ll code build for ARMv6
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v3] ASOC: tegra: move AC97 clock handling to the machine driver
- From: Lucas Stach <dev@xxxxxxxxxx>
- Re: [PATCH 62/62] ARM: tegra: make debug_ll code build for ARMv6
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 62/62] ARM: tegra: make debug_ll code build for ARMv6
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v3] ASOC: tegra: move AC97 clock handling to the machine driver
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2] ASoC: tegra: Use flat regcache.
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] ARM: tegra: fix Dalmore pinctrl configuration
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v3] ASOC: tegra: move AC97 clock handling to the machine driver
- From: Stefan Agner <stefan@xxxxxxxx>
- [PATCH v3] ASOC: tegra: move AC97 clock handling to the machine driver
- From: Lucas Stach <dev@xxxxxxxxxx>
- Re: [PATCH v2 1/2] remgap: Fix possible sleep-in-atomic in regmap_bulk_write()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 1/2] remgap: Fix possible sleep-in-atomic in regmap_bulk_write()
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH v2 1/2] remgap: Fix possible sleep-in-atomic in regmap_bulk_write()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 1/2] remgap: Fix possible sleep-in-atomic in regmap_bulk_write()
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH v2 1/2] remgap: Fix possible sleep-in-atomic in regmap_bulk_write()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 2/2] remgap: Fix possible sleep-in-atomic in regmap_register_patch()
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v2 1/2] remgap: Fix possible sleep-in-atomic in regmap_bulk_write()
- From: Takashi Iwai <tiwai@xxxxxxx>
- [PATCH v2 2/2] remgap: Fix possible sleep-in-atomic in regmap_register_patch()
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH] regmap: Fix possible sleep-in-atomic in fast io mode
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] regmap: Fix possible sleep-in-atomic in fast io mode
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH] regmap: Fix possible sleep-in-atomic in fast io mode
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH] regmap: Fix possible sleep-in-atomic in fast io mode
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [alsa-devel] [PATCH] ASoC: tegra: Use flat regcache.
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [alsa-devel] [PATCH] ASoC: tegra: Use flat regcache.
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [alsa-devel] [PATCH] ASoC: tegra: Use flat regcache.
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [alsa-devel] [PATCH] ASoC: tegra: Use flat regcache.
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: Colibri T20 AC97 initialization issue
- From: Lucas Stach <dev@xxxxxxxxxx>
- Re: [alsa-devel] [PATCH] ASoC: tegra: Use flat regcache.
- From: Takashi Iwai <tiwai@xxxxxxx>
- Tegra baseline test results for v3.14-rc7
- From: Paul Walmsley <pwalmsley@xxxxxxxxxx>
- Re: [PATCH] ASoC: tegra: Use flat regcache.
- From: Dylan Reid <dgreid@xxxxxxxxxxxx>
- [PATCH v2] ASoC: tegra: Use flat regcache.
- From: Dylan Reid <dgreid@xxxxxxxxxxxx>
- Re: [PATCH] ASoC: tegra: Use flat regcache.
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- [PATCH] ASoC: tegra: Use flat regcache.
- From: Dylan Reid <dgreid@xxxxxxxxxxxx>
- Colibri T20 AC97 initialization issue
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: imx: fix invalid #address-cells value
- From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: DT: fix gic interrupt controller documentation
- From: Grant Likely <grant.likely@xxxxxxxxxx>
- Re: [PATCH 1/2] ARM: DT: fix gic interrupt controller documentation
- From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
- Re: [PATCH] pinctrl: tegra: add some missing Tegra114 entries
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- re: [v2] media: soc-camera: OF cameras
- From: Josh Wu <josh.wu@xxxxxxxxx>
- Re: [PATCH] pinctrl: tegra: fix some mistakes in Tegra124
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/2] ARM: DT: fix gic interrupt controller documentation
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: DT: fix gic interrupt controller documentation
- From: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: DT: fix gic interrupt controller documentation
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2 6/6] PCI: designware: use new OF interrupt mapping when possible
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- [PATCH 2/2] ARM: dts: imx: fix invalid #address-cells value
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- [PATCH 1/2] ARM: DT: fix gic interrupt controller documentation
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- [PATCH] pinctrl: tegra: add some missing Tegra114 entries
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] pinctrl: tegra: fix some mistakes in Tegra124
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 4/4] pinctrl: tegra: consistency cleanup
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 3/4] pinctrl: tegra: dynamically calculate function list of groups
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 2/4] pinctrl: tegra: init Tegra20/30 at module_init time
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/4] pinctrl: tegra: fix some typos and inconsistencies
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/2] of/irq: Fix irq-mapping in of_irq_parse_raw()
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] of/irq: Fix irq-mapping in of_irq_parse_raw()
- From: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] pinctrl: tegra: fix some typos and inconsistencies
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 7/7] PCI: designware: split samsung and fsl bindings
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] pinctrl: tegra: fix some typos and inconsistencies
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Tegra baseline test results for v3.14-rc6
- From: Paul Walmsley <pwalmsley@xxxxxxxxxx>
- Re: [PATCH v2 5/6] ARM: dts: imx6: add PCIe interrupt mapping properties
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH v2] media: soc-camera: OF cameras
- From: Bryan Wu <cooloney@xxxxxxxxx>
- [GIT PULL 5/5] ARM: tegra: defconfig updates for 3.15
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [GIT PULL 4/5] ARM: tegra: device tree changes for 3.15
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [GIT PULL 2/5] ARM: tegra: driver changes for 3.15
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [GIT PULL 3/5] ARM: tegra: core SoC changes for 3.15
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [GIT PULL 1/5] ARM: tegra: Trusted Foundations work for 3.15
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 4/4] pinctrl: tegra: consistency cleanup
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 3/4] pinctrl: tegra: dynamically calculate function list of groups
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 2/4] pinctrl: tegra: init Tegra20/30 at module_init time
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 1/4] pinctrl: tegra: fix some typos and inconsistencies
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2] media: soc-camera: OF cameras
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCHv2 3/5] net: rfkill: gpio: remove gpio names
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008
- From: Wei Ni <wni@xxxxxxxxxx>
- Re: [PATCHv2 3/5] net: rfkill: gpio: remove gpio names
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCHv2 3/5] net: rfkill: gpio: remove gpio names
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v2] media: soc-camera: OF cameras
- From: Bryan Wu <cooloney@xxxxxxxxx>
- Re: [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/6] ARM: dts: tegra: add PCIe interrupt mapping properties
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2 6/6] PCI: designware: use new OF interrupt mapping when possible
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v2 1/6] ARM: dts: tegra: add PCIe interrupt mapping properties
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH v2 3/6] PCI: rcar: use new OF interrupt mapping when possible
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH v2 6/6] PCI: designware: use new OF interrupt mapping when possible
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH v2 4/6] ARM: dts: exynos5440: fix PCIe interrupt mapping
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH v2 1/6] ARM: dts: tegra: add PCIe interrupt mapping properties
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] pinctrl: tegra: fix some typos and inconsistencies
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: use 2 address cells for Tegra124 DT
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2 6/6] PCI: designware: use new OF interrupt mapping when possible
- From: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 3/6] PCI: rcar: use new OF interrupt mapping when possible
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH v2 1/6] ARM: dts: tegra: add PCIe interrupt mapping properties
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH v2 4/6] ARM: dts: exynos5440: fix PCIe interrupt mapping
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH v2 5/6] ARM: dts: imx6: add PCIe interrupt mapping properties
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH v2 0/6] PCI irq mapping fixes and cleanups
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH v2 6/6] PCI: designware: use new OF interrupt mapping when possible
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH 5/7] ARM: dts: imx6: add PCIe interrupt mapping properties
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008
- From: Wei Ni <wni@xxxxxxxxxx>
- Re: [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008
- From: Wei Ni <wni@xxxxxxxxxx>
- Re: [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008
- From: Wei Ni <wni@xxxxxxxxxx>
- Re: [PATCHv2 3/5] net: rfkill: gpio: remove gpio names
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCHv2 3/5] net: rfkill: gpio: remove gpio names
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008
- From: Wei Ni <wni@xxxxxxxxxx>
- Re: [PATCHv2 3/5] net: rfkill: gpio: remove gpio names
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCHv2 3/5] net: rfkill: gpio: remove gpio names
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH V3 1/5] genirq: define flag IRQ_SRC_DST_INVERTED, and accessors
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] of/irq: Fix irq-mapping in of_irq_parse_raw()
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- [PATCH] ARM: tegra: use 2 address cells for Tegra124 DT
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: add LED options back into tegra_defconfig
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH V3 1/5] genirq: define flag IRQ_SRC_DST_INVERTED, and accessors
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 7/7] PCI: designware: split samsung and fsl bindings
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH 6/7] PCI: designware: use new OF interrupt mapping when possible
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- Re: [PATCH 7/7] PCI: designware: split samsung and fsl bindings
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH 1/2] of/irq: Fix irq-mapping in of_irq_parse_raw()
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- Re: [PATCH 7/7] PCI: designware: split samsung and fsl bindings
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH v2 2/3] hwmon: lm90: expose to thermal fw via DT nodes
- From: Wei Ni <wni@xxxxxxxxxx>
- [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008
- From: Wei Ni <wni@xxxxxxxxxx>
- [PATCH v2 1/3] hwmon: (lm90) split set&show temp as common codes
- From: Wei Ni <wni@xxxxxxxxxx>
- [PATCH v2 0/3] expose lm90 to thermal fw
- From: Wei Ni <wni@xxxxxxxxxx>
- Re: [PATCH V3 1/5] genirq: define flag IRQ_SRC_DST_INVERTED, and accessors
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
- Re: [PATCH V3 1/5] genirq: define flag IRQ_SRC_DST_INVERTED, and accessors
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
- Re: [PATCH V3 4/5] mfd: palmas: support IRQ inversion at the board level
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 0/7] PCI irq mapping fixes and cleanups
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- Re: [PATCH V2 1/3] dt: palmas: support IRQ inversion at the board level
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] ARM: tegra: add device tree for SHIELD
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCH 0/7] PCI irq mapping fixes and cleanups
- From: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/7] PCI irq mapping fixes and cleanups
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- Tegra baseline test results for v3.14-rc5
- From: Paul Walmsley <pwalmsley@xxxxxxxxxx>
- [PATCH V3 2/5] dt: define IRQ flags bit 4 as src/dst inversion
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH V3 5/5] ARM: tegra: fix Dalmore PMIC IRQ polarity
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH V3 3/5] irqchip: gic: parse IRQ specifier flag src/dst inversion
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH V3 4/5] mfd: palmas: support IRQ inversion at the board level
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH V3 1/5] genirq: define flag IRQ_SRC_DST_INVERTED, and accessors
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 0/7] PCI irq mapping fixes and cleanups
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- Re: [PATCH 0/7] PCI irq mapping fixes and cleanups
- From: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: Allocate 64 MiB for CMA by default
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 0/7] PCI irq mapping fixes and cleanups
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: add device tree for SHIELD
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH V2 1/3] dt: palmas: support IRQ inversion at the board level
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] ARM: tegra: Allocate 64 MiB for CMA by default
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 4/7] ARM: dts: exynos5440: fix PCIe interrupt mapping
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH 0/7] PCI irq mapping fixes and cleanups
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 4/7] ARM: dts: exynos5440: fix PCIe interrupt mapping
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 4/7] ARM: dts: exynos5440: fix PCIe interrupt mapping
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: add device tree for SHIELD
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH] ARM: tegra: add device tree for SHIELD
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH] ARM: tegra: add device tree for Tegra Note 7
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCH V2 1/3] dt: palmas: support IRQ inversion at the board level
- From: Graeme Gregory <graeme@xxxxxxxxxxx>
- Re: [PATCH v7 1/1] watchdog: Add tegra watchdog
- From: Wim Van Sebroeck <wim@xxxxxxxxx>
- Re: [PATCH 0/7] PCI irq mapping fixes and cleanups
- From: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH V2 1/3] dt: palmas: support IRQ inversion at the board level
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 0/7] PCI irq mapping fixes and cleanups
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: add LED options back into tegra_defconfig
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 1/7] ARM: dts: tegra: add PCIe interrupt mapping properties
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 7/7] PCI: designware: split samsung and fsl bindings
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- Re: [PATCH 0/7] PCI irq mapping fixes and cleanups
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 7/7] PCI: designware: split samsung and fsl bindings
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v3 01/10] ARM: tegra: Overhaul Venice2 regulators
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 5/7] ARM: dts: imx6: add PCIe interrupt mapping properties
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 0/7] PCI irq mapping fixes and cleanups
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 4/7] ARM: dts: exynos5440: fix PCIe interrupt mapping
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 6/7] PCI: designware: use new OF interrupt mapping when possible
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 2/7] PCI: tegra: use new OF interrupt mapping when possible
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 3/7] PCI: rcar: use new OF interrupt mapping when possible
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 1/7] ARM: dts: tegra: add PCIe interrupt mapping properties
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 7/7] PCI: designware: split samsung and fsl bindings
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH v3 09/10] ARM: tegra: Rename as3722 node to pmic
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 6/7] ARM: tegra: Add Tegra124 USB support
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v3 10/10] ARM: tegra: Update default configuration
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v3 09/10] ARM: tegra: Rename as3722 node to pmic
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v3 08/10] ARM: tegra: Fix whitespace around '='
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v3 07/10] ARM: tegra: Enable USB on Venice2
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v3 06/10] ARM: tegra: Add Tegra124 USB support
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v3 04/10] ARM: tegra: Add Tegra124 eDP support
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v3 05/10] ARM: tegra: Enable eDP for Venice2
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v3 03/10] ARM: tegra: Add Tegra124 host1x support
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v3 02/10] ARM: tegra: Hook up SDMMC3 power-supply on Venice2
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v3 01/10] ARM: tegra: Overhaul Venice2 regulators
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH V2 1/3] dt: palmas: support IRQ inversion at the board level
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: Overhaul Venice2 regulators
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH V2 1/3] dt: palmas: support IRQ inversion at the board level
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] ARM: tegra: Overhaul Venice2 regulators
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 6/7] ARM: tegra: Add Tegra124 USB support
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH V2 1/3] dt: palmas: support IRQ inversion at the board level
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH V2 1/3] dt: palmas: support IRQ inversion at the board level
- From: Graeme Gregory <graeme@xxxxxxxxxxx>
- [PATCH V2 3/3] ARM: tegra: fix Dalmore PMIC IRQ polarity
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH V2 2/3] mfd: palmas: support IRQ inversion at the board level
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH V2 1/3] dt: palmas: support IRQ inversion at the board level
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: only run PL310 init on systems with one
- From: Luís Henriques <luis.henriques@xxxxxxxxxxxxx>
- [PATCHv3 4/5] net: rfkill: gpio: add ACPI ID for GPS module on Lenovo Miix2
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Tegra baseline test results for v3.14-rc4
- From: Paul Walmsley <pwalmsley@xxxxxxxxxx>
- Tegra baseline test results for v3.14-rc3
- From: Paul Walmsley <pwalmsley@xxxxxxxxxx>
- Re: [PATCHv2 4/5] net: rfkill: gpio: add ACPI ID for GPS module on Lenove Miix2
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Tegra baseline test results for v3.14-rc2
- From: Paul Walmsley <pwalmsley@xxxxxxxxxx>
- Tegra baseline test results for v3.14-rc1
- From: Paul Walmsley <pwalmsley@xxxxxxxxxx>
- Re: Tegra clockframework fixes for 3.14
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- Re: [PATCH] ARM: tegra: add device tree for SHIELD
- From: Arend van Spriel <arend@xxxxxxxxxxxx>
- [PATCH] ARM: tegra: only run PL310 init on systems with one
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [flasher PATCH 1/3] Add libtool to dependency list in README
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 7/7] ARM: tegra: Enable USB on Venice2
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH 6/7] ARM: tegra: Add Tegra124 USB support
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH 5/7] ARM: tegra: Enable eDP for Venice2
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH 4/7] ARM: tegra: Add Tegra124 eDP support
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH 3/7] ARM: tegra: Add Tegra124 host1x support
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH 2/7] ARM: tegra: Hook up SDMMC3 power-supply on Venice2
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v2 1/7] ARM: tegra: Overhaul Venice2 regulators
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH] ARM: tegra: Overhaul Venice2 regulators
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: Tegra clockframework fixes for 3.14
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- Re: [PATCH] ARM: tegra: add device tree for SHIELD
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCH] ARM: tegra: add device tree for SHIELD
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: add device tree for SHIELD
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCH] ARM: tegra: add device tree for SHIELD
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCHv2 3/5] net: rfkill: gpio: remove gpio names
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCHv2 1/5] ARM: tegra: remove obsolete gpio entries
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: add device tree for SHIELD
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [RFC 0/2] Enable USB support for Venice2
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: Overhaul Venice2 regulators
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [RFC 2/2] ARM: tegra: Enable USB on Venice2
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [RFC 1/2] ARM: tegra: Add Tegra124 USB support
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [RFC 0/2] Enable USB support for Venice2
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH] ARM: tegra: Export I/O rail functions
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [flasher PATCH 3/3] Support U-Boot's temporary output DTB path
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [flasher PATCH 2/3] Use O= rather than BUILD_DIR= when building U-Boot
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [flasher PATCH 1/3] Add libtool to dependency list in README
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: Combine VBUS enable pins into one node
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: Use "disabled" for status property
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: remove tegra EMC scaling driver
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCHv2 0/5] net: rfkill: gpio: cleanup and a few new acpi ids
- From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
- Re: [PATCH] USB: EHCI: tegra: Drop unused defines
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCHv2 4/5] net: rfkill: gpio: add ACPI ID for GPS module on Lenove Miix2
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH] ARM: tegra: Overhaul Venice2 regulators
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH] USB: EHCI: tegra: Drop unused defines
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH] ARM: tegra: Export I/O rail functions
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH] ARM: tegra: Combine VBUS enable pins into one node
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH] ARM: tegra: Use "disabled" for status property
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCHv2 1/5] ARM: tegra: remove obsolete gpio entries
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCHv2 0/5] net: rfkill: gpio: cleanup and a few new acpi ids
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- Re: [PATCHv2 1/5] ARM: tegra: remove obsolete gpio entries
- From: Marc Dietrich <marvin24@xxxxxx>
- [PATCHv2 2/5] net: rfkill: gpio: remove unused and obsolete platform parameters
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCHv2 4/5] net: rfkill: gpio: add ACPI ID for GPS module on Lenove Miix2
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCHv2 5/5] net: rfkill: gpio: add ACPI IDs for a Broadcom bluetooth chip
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCHv2 3/5] net: rfkill: gpio: remove gpio names
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCHv2 1/5] ARM: tegra: remove obsolete gpio entries
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCHv2 0/5] net: rfkill: gpio: cleanup and a few new acpi ids
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH] crypto: tegra: remove driver
- From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: add device tree for SHIELD
- From: Arend van Spriel <arend@xxxxxxxxxxxx>
- Re: [PATCH 1/2] mfd: palmas: support IRQ inversion at the board level
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v4 5/5] drm/tegra: Add eDP support
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v2] media: soc-camera: OF cameras
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [PATCH] ARM: tegra: add device tree for SHIELD
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCH v2] media: soc-camera: OF cameras
- From: Bryan Wu <cooloney@xxxxxxxxx>
- Re: [PATCH] ARM: tegra: add device tree for SHIELD
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: Tegra clockframework fixes for 3.14
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- [PATCH] ARM: tegra: add device tree for SHIELD
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- Re: [lm-sensors] [PATCH v5] hwmon: (lm90) split set&show temp as common codes
- From: Wei Ni <wni@xxxxxxxxxx>
- Re: [lm-sensors] [PATCH v5] hwmon: (lm90) split set&show temp as common codes
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [lm-sensors] [PATCH v5] hwmon: (lm90) split set&show temp as common codes
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- [PATCH] ARM: tegra: add LED options back into tegra_defconfig
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/3] drm/tegra: Relicense public header under MIT
- From: Emil Goode <emilgoode@xxxxxxxxx>
- Re: [PATCH] clk: tegra: Fix vic03 mux index
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Tegra clockframework fixes for 3.14
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- Re: [PATCH] clk: tegra124: remove gr2d and gr3d clocks
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2] host1x: export host1x_syncpt_incr_max function
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v5 5/5] drm/tegra: Add eDP support
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v5 4/5] drm/dp: Allow registering AUX channels as I2C busses
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v5 3/5] drm/dp: Add DisplayPort link helpers
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v5 2/5] drm/dp: Add drm_dp_dpcd_read_link_status()
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v5 1/5] drm/dp: Add AUX channel infrastructure
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v5 0/5] drm/dp: Introduce AUX channel infrastructure
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v2 2/3] drm/tegra: Relicense under GPL v2
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v2 3/3] drm/tegra: Use standard GPL v2 license text
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v2 0/3] drm/tegra: Restore licensing consistency
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v2 1/3] drm/tegra: Relicense public header under MIT
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH] clk: tegra: Fix vic03 mux index
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- [PATCH] clk: tegra124: remove gr2d and gr3d clocks
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- Re: [PATCH RFC 31/31] mmc: sdhci-tegra: get rid of special PRESENT_STATE register handling
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH RFC 31/31] mmc: sdhci-tegra: get rid of special PRESENT_STATE register handling
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- [PATCH v2] host1x: export host1x_syncpt_incr_max function
- From: Bryan Wu <cooloney@xxxxxxxxx>
- Re: [PATCH] host1x: export host1x_syncpt_incr_max function
- From: Bryan Wu <cooloney@xxxxxxxxx>
- Re: [PATCH] host1x: export host1x_syncpt_incr_max function
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] host1x: export host1x_syncpt_incr_max function
- From: Bryan Wu <cooloney@xxxxxxxxx>
- Re: [PATCH RFC 31/31] mmc: sdhci-tegra: get rid of special PRESENT_STATE register handling
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: add SPI flash to Venice2 DT
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [flasher PATCH] Enable Venice2 board by default
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: only run PL310 init on systems with one
- From: Olof Johansson <olof@xxxxxxxxx>
- RE: [PATCH] crypto: tegra: remove driver
- From: Varun Wadekar <vwadekar@xxxxxxxxxx>
- Re: [PATCH] ARM: tegra: Add head numbers to display controllers
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [PATCH] ARM: tegra: fix RTC0 alias for Cardhu
- From: Olof Johansson <olof@xxxxxxxxx>
- [PATCH] ARM: tegra: only run PL310 init on systems with one
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [flasher PATCH] Enable Venice2 board by default
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: Add head numbers to display controllers
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] ARM: tegra: add SPI flash to Venice2 DT
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] ARM: tegra: Add head numbers to display controllers
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH] ARM: tegra: remove tegra EMC scaling driver
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] crypto: tegra: remove driver
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2 0/6] ARM: firmware: improvements to Trusted Foundations support
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2] media: soc-camera: OF cameras
- From: Bryan Wu <cooloney@xxxxxxxxx>
- Re: [PATCH 1/2] mfd: palmas: support IRQ inversion at the board level
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 1/2] mfd: palmas: support IRQ inversion at the board level
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH RFC 31/31] mmc: sdhci-tegra: get rid of special PRESENT_STATE register handling
- From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
- [PATCH RFC 25/31] mmc: sdhci: convert sdhci_set_uhs_signaling() into a library function
- From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
- [PATCH RFC 19/31] mmc: sdhci: convert sdhci_set_clock() into a library function
- From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
- [PATCH RFC 12/31] mmc: sdhci: convert reset into a library function
- From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
- [PATCH RFC 11/31] mmc: sdhci: convert generic bus width setup to library function
- From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
- [PATCH RFC 00/31] SDHCI and SDIO IRQ improvements
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] mfd: palmas: support IRQ inversion at the board level
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 2/2] ARM: tegra: fix Dalmore PMIC IRQ polarity
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
- Re: [PATCH 1/2] mfd: palmas: support IRQ inversion at the board level
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
- [PATCH v3] drm/nouveau: support for platform devices
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH 2/2] ARM: tegra: fix Dalmore PMIC IRQ polarity
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 1/2] mfd: palmas: support IRQ inversion at the board level
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v7 1/1] watchdog: Add tegra watchdog
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v7 1/1] watchdog: Add tegra watchdog
- From: Andrew Chew <achew@xxxxxxxxxx>
- Re: [PATCH v2 4/6] ARM: firmware: add prepare_idle() operation
- From: Tomasz Figa <t.figa@xxxxxxxxxxx>
- Re: [PATCH v2 4/6] ARM: firmware: add prepare_idle() operation
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH] ARM: tegra: fix RTC0 alias for Cardhu
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2 4/6] ARM: firmware: add prepare_idle() operation
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: don't timeout if CPU is powergated
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: How to use host1x syncpt?
- From: Terje Bergström <tbergstrom@xxxxxxxxxx>
- Re: [PATCH v2 4/6] ARM: firmware: add prepare_idle() operation
- From: Tomasz Figa <t.figa@xxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: don't timeout if CPU is powergated
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH] ARM: tegra: don't timeout if CPU is powergated
- From: Marc Dietrich <marvin24@xxxxxx>
- Re: [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig
- From: Bryan Wu <cooloney@xxxxxxxxx>
- Re: [PATCH] ARM: tegra: dalmore: fix irq trigger type
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [Nouveau] [PATCH v2] drm/nouveau: support for platform devices
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCH] ARM: tegra: dalmore: fix irq trigger type
- From: Joseph Lo <josephl@xxxxxxxxxx>
- Re: [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig
- From: Bryan Wu <cooloney@xxxxxxxxx>
- Re: [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig
- From: Bryan Wu <cooloney@xxxxxxxxx>
- Re: [PATCH v5 1/1] watchdog: Add tegra watchdog
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v6 1/1] watchdog: Add tegra watchdog
- From: Andrew Chew <achew@xxxxxxxxxx>
- RE: [PATCH v5 1/1] watchdog: Add tegra watchdog
- From: Andrew Chew <AChew@xxxxxxxxxx>
- Re: [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig
- From: Bryan Wu <cooloney@xxxxxxxxx>
- Re: [PATCH v2 0/6] ARM: firmware: improvements to Trusted Foundations support
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH v2] media: soc-camera: OF cameras
- From: Bryan Wu <cooloney@xxxxxxxxx>
- Re: [PATCH v3] ARM: tegra: cpuidle: use firmware for power down
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [PATCH] ARM: tegra: dalmore: fix irq trigger type
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: How to use host1x syncpt?
- From: Bryan Wu <cooloney@xxxxxxxxx>
- Re: [PATCH 0/3] drm/tegra: Restore licensing consistency
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: tegra: don't timeout if CPU is powergated
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 0/3] drm/tegra: Restore licensing consistency
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v5 1/1] watchdog: Add tegra watchdog
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 0/3] drm/tegra: Restore licensing consistency
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [Nouveau] [PATCH v2] drm/nouveau: support for platform devices
- From: Emil Velikov <emil.l.velikov@xxxxxxxxx>
[Index of Archives]
[ARM Kernel]
[Linux ARM]
[Linux ARM MSM]
[Linux USB Devel]
[Video for Linux]
[Linux SCSI]
[Samba]
[Yosemite News]