On 02/25/2014 09:58 PM, Alexandre Courbot wrote: > On 02/26/2014 07:38 AM, Stephen Warren wrote: >> On 02/24/2014 07:13 PM, Alexandre Courbot wrote: >>> On 02/25/2014 03:53 AM, Stephen Warren wrote: >>>> On 02/24/2014 03:26 AM, Alexandre Courbot wrote: >>>>> Add a device tree for NVIDIA SHIELD. The set of enabled features is >>>>> still minimal with no display option (although HDMI should be easy >>>>> to get to work) and USB requiring external power. ... >>> For the Wifi chip, non-removable would be the correct setting >>> hardware-wise, but there is a trap: the chip has its reset line asserted >>> at boot-time, and you need to set GPIO 229 to de-assert it. Only after >>> that will the device be detected on the SDIO bus. Since it lacks a CD >>> line, it must be polled, hence the broken-cd property. >> >> How does that GPIO get manipulated right now? I assume you must be >> manually configuring it via sysfs after boot or something? If so, >> perhaps it's best to just leave out the WiFi node until it works >> automatically. > > The GPIO needs to be set from user-space, yes. But if we leave the Wifi > node out, I'm concerned that wireless will not be usable at all, > wouldn't it? True, but if we have no representation of the device in DT that works without manually enabling clocks and/or GPIOs, it's not a complete/accurate representation of the HW, so it doesn't make sense to add it to DT. Yes, I admit that sucks. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
