From: Thierry Reding <treding@xxxxxxxxxx>
Some of the regulators and the relationships to other regulators are
wrong. This commit attempts to rectify this by making them more similar
to what the schematics contain. This starts by adding a +VDD_MUX supply
that represents the 12V input and derives the main +3.3V_SYS and +5V_SYS
supplies from that. The majority of the other regulators derive from one
of those three.
While at it, rename the regulators to match the names in the schematics
to make them easier to match up.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
Changes in v2:
- rename as3722_sd2 label to vdd_1v35_lp0 and as3722_sd5 label to vddio_1v8
- rename sd0 regulator from +VDD_CPU to +VDD_CPU_AP to match schematics
- rename sd6 regulator from +VDD_GPU to +VDD_GPU_AP to match schematics
- change polarity of GPIO K.01 from low to high for regulator +5V_VDD_TS_SW
- rename +3.3V_AVDD_HDMI regulator to +3.3V_AVDD_HDMI_AP_GATED
- make +3.3V_RUN regulator controlled by PMU_REGEN3
- add +3.3V_LP0 regulator (controlled by PMU_REGEN1), marking it as always
on because it supplies the USB VBUS pins and we don't have a supply
input for those yet
arch/arm/boot/dts/tegra124-venice2.dts | 169 +++++++++++++++++++--------------
1 file changed, 98 insertions(+), 71 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index c950c76185d2..50993ef84e67 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -644,19 +644,19 @@
};
regulators {
- vsup-sd2-supply = <&vdd_ac_bat_reg>;
- vsup-sd3-supply = <&vdd_ac_bat_reg>;
- vsup-sd4-supply = <&vdd_ac_bat_reg>;
- vsup-sd5-supply = <&vdd_ac_bat_reg>;
- vin-ldo0-supply = <&as3722_sd2>;
- vin-ldo1-6-supply = <&vdd_ac_bat_reg>;
- vin-ldo2-5-7-supply = <&as3722_sd5>;
- vin-ldo3-4-supply = <&vdd_ac_bat_reg>;
- vin-ldo9-10-supply = <&vdd_ac_bat_reg>;
- vin-ldo11-supply = <&vdd_ac_bat_reg>;
+ vsup-sd2-supply = <&vdd_5v0_sys>;
+ vsup-sd3-supply = <&vdd_5v0_sys>;
+ vsup-sd4-supply = <&vdd_5v0_sys>;
+ vsup-sd5-supply = <&vdd_5v0_sys>;
+ vin-ldo0-supply = <&vdd_1v35_lp0>;
+ vin-ldo1-6-supply = <&vdd_3v3_run>;
+ vin-ldo2-5-7-supply = <&vddio_1v8>;
+ vin-ldo3-4-supply = <&vdd_3v3_sys>;
+ vin-ldo9-10-supply = <&vdd_5v0_sys>;
+ vin-ldo11-supply = <&vdd_3v3_run>;
sd0 {
- regulator-name = "vdd-cpu";
+ regulator-name = "+VDD_CPU_AP";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1400000>;
regulator-min-microamp = <3500000>;
@@ -667,7 +667,7 @@
};
sd1 {
- regulator-name = "vdd-core";
+ regulator-name = "+VDD_CORE";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
regulator-min-microamp = <2500000>;
@@ -677,8 +677,8 @@
ams,external-control = <1>;
};
- as3722_sd2: sd2 {
- regulator-name = "vddio-ddr";
+ vdd_1v35_lp0: sd2 {
+ regulator-name = "+1.35V_LP0";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
@@ -686,7 +686,7 @@
};
sd3 {
- regulator-name = "vddio-ddr-2phase";
+ regulator-name = "+1.35V_LP0";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
@@ -694,15 +694,15 @@
};
sd4 {
- regulator-name = "avdd-pex-sata";
+ regulator-name = "+1.05V_RUN";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-boot-on;
regulator-always-on;
};
- as3722_sd5: sd5 {
- regulator-name = "vddio-sys";
+ vddio_1v8: sd5 {
+ regulator-name = "+1.8V_VDDIO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -710,7 +710,7 @@
};
sd6 {
- regulator-name = "vdd-gpu";
+ regulator-name = "+VDD_GPU_AP";
regulator-min-microvolt = <650000>;
regulator-max-microvolt = <1200000>;
regulator-min-microamp = <3500000>;
@@ -720,7 +720,7 @@
};
ldo0 {
- regulator-name = "avdd_pll";
+ regulator-name = "+1.05V_RUN_AVDD";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-boot-on;
@@ -729,13 +729,13 @@
};
ldo1 {
- regulator-name = "run-cam-1.8";
+ regulator-name = "+1.8V_RUN_CAM";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo2 {
- regulator-name = "gen-avdd,vddio-hsic";
+ regulator-name = "+1.2V_GEN_AVDD";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-boot-on;
@@ -743,7 +743,7 @@
};
ldo3 {
- regulator-name = "vdd-rtc";
+ regulator-name = "+1.00V_LP0_VDD_RTC";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-boot-on;
@@ -752,21 +752,19 @@
};
ldo4 {
- regulator-name = "vdd-cam";
+ regulator-name = "+3.3V_RUN_CAM";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-boot-on;
- regulator-always-on;
};
ldo5 {
- regulator-name = "vdd-cam-front";
+ regulator-name = "+1.2V_RUN_CAM_FRONT";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo6 {
- regulator-name = "vddio-sdmmc3";
+ regulator-name = "+VDDIO_SDMMC3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -774,25 +772,25 @@
};
ldo7 {
- regulator-name = "vdd-cam-rear";
+ regulator-name = "+1.05V_RUN_CAM_REAR";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
ldo9 {
- regulator-name = "vdd-touch";
+ regulator-name = "+2.8V_RUN_TOUCH";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo10 {
- regulator-name = "vdd-cam-af";
+ regulator-name = "+2.8V_RUN_CAM_AF";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo11 {
- regulator-name = "vpp-fuse";
+ regulator-name = "+1.8V_RUN_VPP_FUSE";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
@@ -975,99 +973,128 @@
#address-cells = <1>;
#size-cells = <0>;
- vdd_ac_bat_reg: regulator@0 {
+ vdd_mux: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
- regulator-name = "vdd_ac_bat";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
+ regulator-name = "+VDD_MUX";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
regulator-always-on;
+ regulator-boot-on;
};
- vdd_3v3_reg: regulator@1 {
+ vdd_5v0_sys: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
- regulator-name = "vdd_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "+5V_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
- enable-active-high;
- gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vdd_mux>;
};
- vdd_3v3_modem_reg: regulator@2 {
+ vdd_3v3_sys: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
- regulator-name = "vdd-modem-3v3";
+ regulator-name = "+3.3V_SYS";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&as3722 2 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mux>;
};
- vdd_hdmi_5v0_reg: regulator@3 {
+ vdd_3v3_run: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
- regulator-name = "vdd-hdmi-5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
+ regulator-name = "+3.3V_RUN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vdd_3v3_sys>;
};
- vdd_bl_reg: regulator@4 {
+ vdd_3v3_hdmi: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
- regulator-name = "vdd-bl";
+ regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_LOW>;
+ vin-supply = <&vdd_3v3_run>;
};
- vdd_ts_sw_5v0: regulator@5 {
+ vdd_led: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
- regulator-name = "vdd_ts_sw";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
+ regulator-name = "+VDD_LED";
+ gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
- regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_LOW>;
+ vin-supply = <&vdd_mux>;
};
- usb1_vbus_reg: regulator@6 {
+ vdd_5v0_ts: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
- regulator-name = "usb1_vbus";
+ regulator-name = "+5V_VDD_TS_SW";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
- gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
};
- usb3_vbus_reg: regulator@7 {
+ vdd_usb1_vbus: regulator@7 {
compatible = "regulator-fixed";
reg = <7>;
- regulator-name = "usb3_vbus";
+ regulator-name = "+5V_USB_HS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
};
- panel_3v3_reg: regulator@8 {
+ vdd_usb3_vbus: regulator@8 {
compatible = "regulator-fixed";
reg = <8>;
- regulator-name = "panel_3v3";
+ regulator-name = "+5V_USB_SS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_3v3_panel: regulator@9 {
+ compatible = "regulator-fixed";
+ reg = <9>;
+ regulator-name = "+3.3V_PANEL";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- enable-active-high;
gpio = <&as3722 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_run>;
+ };
+
+ vdd_3v3_lp0: regulator@10 {
+ compatible = "regulator-fixed";
+ reg = <10>;
+ regulator-name = "+3.3V_LP0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /*
+ * TODO: find a way to wire this up with the USB EHCI
+ * controllers so that it can be enabled on demand.
+ */
+ regulator-always-on;
+ gpio = <&as3722 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
};
};
--
1.8.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
