From: Thierry Reding <treding@xxxxxxxxxx>
Device tree node name should reflect the kind of device rather than the
specific name of the device.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
arch/arm/boot/dts/tegra124-venice2.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 8c36e4c47871..1ad686154286 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -8,7 +8,7 @@
compatible = "nvidia,venice2", "nvidia,tegra124";
aliases {
- rtc0 = "/i2c@7000d000/as3722@40";
+ rtc0 = "/i2c@7000d000/pmic@40";
rtc1 = "/rtc@7000e000";
};
@@ -617,7 +617,7 @@
status = "okay";
clock-frequency = <400000>;
- as3722: as3722@40 {
+ pmic: pmic@40 {
compatible = "ams,as3722";
reg = <0x40>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -1067,7 +1067,7 @@
regulator-name = "+3.3V_RUN";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -1132,7 +1132,7 @@
regulator-name = "+3.3V_PANEL";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&as3722 4 GPIO_ACTIVE_HIGH>;
+ gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_run>;
};
@@ -1148,7 +1148,7 @@
* controllers so that it can be enabled on demand.
*/
regulator-always-on;
- gpio = <&as3722 2 GPIO_ACTIVE_HIGH>;
+ gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
--
1.8.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
