Re: [PATCH 4/4] ARM: tegra: fix Venice2 VQMMC regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Stephen,

On Tue, Apr 15 2014, Stephen Warren wrote:
> Is there documentation re: what vmmc-supply and vqmmc-supply actually
> refer to? I looked a long while ago and couldn't find any, and didn't
> get an answer when I asked.
>
> Neither
> Documentation/devicetree/bindings/mmc/{mmc.txt,nvidia,tegra20-sdhci.txt}
> seem to say:-(

MMC cards use the same voltage for the VDD pin on the card and to pull
up the signal lines.  UHS SDHCI switches to using 1.8V vqmmc (signaling
voltage) and 3.3V vmmc (card supply voltage).

So the idea is to supply a vqmmc-supply if your board supports
ultra-high-speed modes on an SD 3.0 host, and a vmmc-supply if your
card power is controlled by a regulator.  I agree that this ought to
be in the bindings somewhere.

Thanks,

- Chris.
-- 
Chris Ball   <http://printf.net/>
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux