Linux SPI
[Prev Page][Next Page]
- Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration, (continued)
- [PATCH] spi: cs42l43: Correct SPI root clock speed,
Charles Keepax
- [PATCH v1 0/8] spi: Rework DMA mapped flag,
Andy Shevchenko
- [PATCH v1 1/8] spi: Introduce internal spi_xfer_is_dma_mapped() helper, Andy Shevchenko
- [PATCH v1 2/8] spi: dw: Use new spi_xfer_is_dma_mapped() helper, Andy Shevchenko
- [PATCH v1 3/8] spi: ingenic: Use new spi_xfer_is_dma_mapped() helper, Andy Shevchenko
- [PATCH v1 4/8] spi: omap2-mcspi: Use new spi_xfer_is_dma_mapped() helper, Andy Shevchenko
- [PATCH v1 5/8] spi: pxa2xx: Use new spi_xfer_is_dma_mapped() helper, Andy Shevchenko
- [PATCH v1 7/8] spi: qup: Use new spi_xfer_is_dma_mapped() helper, Andy Shevchenko
- [PATCH v1 6/8] spi: pci1xxxx: Use new spi_xfer_is_dma_mapped() helper, Andy Shevchenko
- [PATCH v1 8/8] spi: Rework per message DMA mapped flag to be per transfer, Andy Shevchenko
- Re: [PATCH v1 0/8] spi: Rework DMA mapped flag, Neil Armstrong
- Re: [PATCH v1 0/8] spi: Rework DMA mapped flag, Nícolas F. R. A. Prado
- [GIT PULL] SPI fixes for v6.10-rc1,
Mark Brown
- [RESEND v3] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema,
Kanak Shilledar
- [PATCH v1 0/2] spi: Make dummy SG handling robust,
Andy Shevchenko
- [PATCH v2 00/11] spi: pxa2xx: Get rid of an additional layer in PCI driver,
Andy Shevchenko
- [PATCH v2 01/11] spi: pxa2xx: Wrap pxa_ssp_request() to be device managed resource, Andy Shevchenko
- [PATCH v2 03/11] spi: pxa2xx: Remove no more needed driver data, Andy Shevchenko
- [PATCH v2 04/11] spi: pxa2xx: Remove hard coded number of chip select pins, Andy Shevchenko
- [PATCH v2 02/11] spi: pxa2xx: Reorganize the SSP type retrieval, Andy Shevchenko
- [PATCH v2 05/11] spi: pxa2xx: Utilise temporary variable for struct device, Andy Shevchenko
- [PATCH v2 08/11] spi: pxa2xx: Remove superflous check for Intel Atom SoCs, Andy Shevchenko
- [PATCH v2 06/11] spi: pxa2xx: Print DMA burst size only when DMA is enabled, Andy Shevchenko
- [PATCH v2 09/11] spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks, Andy Shevchenko
- [PATCH v2 07/11] spi: pxa2xx: Remove duplicate check, Andy Shevchenko
- [PATCH v2 11/11] spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly, Andy Shevchenko
- [PATCH v2 10/11] spi: pxa2xx: Move platform driver to a separate file, Andy Shevchenko
- Re: [PATCH v2 00/11] spi: pxa2xx: Get rid of an additional layer in PCI driver, Mark Brown
- [PATCH v7 0/4] Marvell HW overlay support for Cadence xSPI,
Witold Sadowski
- [PATCH 1/1] spi: dt-bindings: fsl-dspi: Convert to yaml format,
Frank Li
- [PATCH] spi: Assign dummy scatterlist to unidirectional transfers,
Nícolas F. R. A. Prado
- [PATCH v6 0/5] Marvell HW overlay support for Cadence xSPI,
Witold Sadowski
- [PATCH v5 0/5] Marvell HW overlay support for Cadence xSPI,
Witold Sadowski
- [PATCH 00/18] BCM2835 DMA mapping cleanups and fixes,
Dave Stevenson
- [PATCH 01/18] dma-direct: take dma-ranges/offsets into account in resource mapping, Dave Stevenson
- [PATCH 03/18] ARM: dts: bcm283x: Update to use dma-channel-mask, Dave Stevenson
- [PATCH 02/18] dmaengine: bcm2835: Support common dma-channel-mask, Dave Stevenson
- [PATCH 04/18] dmaengine: bcm2835: move CB info generation into separate function, Dave Stevenson
- [PATCH 05/18] dmaengine: bcm2835: move CB final extra info generation into function, Dave Stevenson
- [PATCH 07/18] dmaengine: bcm2385: drop info parameters, Dave Stevenson
- [PATCH 06/18] dmaengine: bcm2835: make address increment platform independent, Dave Stevenson
- [PATCH 08/18] dmaengine: bcm2835: pass dma_chan to generic functions, Dave Stevenson
- [PATCH 10/18] dmaengine: bcm2835: Add backwards compatible handling until clients updated, Dave Stevenson
- [PATCH 11/18] dmaengine: bcm2835: Use dma_map_resource to map addresses, Dave Stevenson
- [PATCH 09/18] dmaengine: bcm2835: Add function to handle DMA mapping, Dave Stevenson
- [PATCH 15/18] spi: bcm2835: Use phys addresses for slave DMA config, Dave Stevenson
- [PATCH 12/18] dmaengine: bcm2835: Read ranges if dma-ranges aren't mapped, Dave Stevenson
- [PATCH 16/18] drm/vc4: Use phys addresses for slave DMA config, Dave Stevenson
- [PATCH 14/18] mmc: bcm2835: Use phys addresses for slave DMA config, Dave Stevenson
- [PATCH 17/18] ASoC: bcm2835-i2s: Use phys addresses for DAI DMA, Dave Stevenson
- [PATCH 13/18] arm: dt: Add dma-ranges to the bcm283x platforms, Dave Stevenson
- [PATCH 18/18] dmaengine: bcm2835: Revert the workaround for DMA addresses, Dave Stevenson
- Re: [PATCH 00/18] BCM2835 DMA mapping cleanups and fixes, Florian Fainelli
- [PATCH] spi: meson-spicc: set SPI clock flag CLK_SET_RATE_PARENT,
Xianwei Zhao via B4 Relay
- [PATCH] spi: stm32: Revert change that enabled controller before asserting CS,
Uwe Kleine-König
- [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems,
Eddie James
- [PATCH v6 01/20] spi: dt-bindings: Document the IBM FSI-attached SPI controller, Eddie James
- [PATCH v6 04/20] dt-bindings: fsi: p9-occ: Convert to json-schema, Eddie James
- [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system, Eddie James
- [PATCH v6 10/20] dt-bindings: fsi: Document the FSI Hub Controller, Eddie James
- [PATCH v6 19/20] fsi: occ: Find next available child rather than node name match, Eddie James
- [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema, Eddie James
- [PATCH v6 18/20] fsi: occ: Get device number from FSI minor number API, Eddie James
- [PATCH v6 02/20] dt-bindings: fsi: fsi2spi: Document SPI controller child nodes, Eddie James
- [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine, Eddie James
- [PATCH v6 08/20] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema, Eddie James
- [PATCH v6 07/20] dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller, Eddie James
- [PATCH v6 09/20] dt-bindings: fsi: Document the AST2700 FSI controller, Eddie James
- [PATCH v6 05/20] dt-bindings: fsi: Document the IBM SBEFIFO engine, Eddie James
- [PATCH v6 12/20] dt-bindings: arm: aspeed: add IBM P11 BMC boards, Eddie James
- [PATCH v6 20/20] fsi: scom: Update compatible string to match documentation, Eddie James
- [PATCH v6 15/20] ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC system, Eddie James
- [PATCH v6 14/20] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system, Eddie James
- [PATCH v6 06/20] dt-bindings: fsi: Document the FSI controller common properties, Eddie James
- [PATCH v6 13/20] ARM: dts: aspeed: Add IBM P11 FSI devices, Eddie James
- [PATCH v6 16/20] ARM: dts: aspeed: Add IBM P11 Fuji BMC system, Eddie James
Re: [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems, Eddie James
Re: [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems, Rob Herring
[PATCH v1 0/2] soi: Don't call DMA sync API when not needed,
Andy Shevchenko
[PATCH 0/4] spi: differentiate between unsupported and invalid requests,
Miquel Raynal
[PATCH] spi: dt-bindings: marvell,mmp2-ssp: Merge PXA SSP into schema,
Rob Herring (Arm)
[PATCH v6 0/8] Add QPIC SPI NAND driver,
Md Sadre Alam
[PATCH] spi: stm32: Don't warn about spurious interrupts,
Uwe Kleine-König
[PATCH] spi: imx: remove empty cleanup function, Martin Kaiser
[PATCH v2] spidev: Introduce "linux,spidev-name" property for device tree of spidev.,
egyszeregy
[PATCH] spidev: Introduce "linux,spidev-name" property for device tree of spidev.,
egyszeregy
From Financial Crimes Enforcement Network, Financial Crimes Enforcement Network
[PATCH v1 00/10] spi: pxa2xx: Get rid of an additional layer in PCI driver,
Andy Shevchenko
- [PATCH v1 01/10] spi: pxa2xx: Reorganize the SSP type retrieval, Andy Shevchenko
- [PATCH v1 02/10] spi: pxa2xx: Remove no more needed driver data, Andy Shevchenko
- [PATCH v1 03/10] spi: pxa2xx: Remove hard coded number of chip select pins, Andy Shevchenko
- [PATCH v1 04/10] spi: pxa2xx: Utilise temporary variable for struct device, Andy Shevchenko
- [PATCH v1 06/10] spi: pxa2xx: Remove duplicate check, Andy Shevchenko
- [PATCH v1 05/10] spi: pxa2xx: Print DMA burst size only when DMA is enabled, Andy Shevchenko
- [PATCH v1 08/10] spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks, Andy Shevchenko
- [PATCH v1 09/10] spi: pxa2xx: Move platform driver to a separate file, Andy Shevchenko
- [PATCH v1 07/10] spi: pxa2xx: Remove superflous check for Intel Atom SoCs, Andy Shevchenko
- [PATCH v1 10/10] spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly, Andy Shevchenko
rv1108: SPI DMA failure, Fabio Estevam
[PATCH v1 0/3] spi: gpio: Convert to be used outside of OF,
Andy Shevchenko
[PATCH v1 0/3] spi: bitbang: Clean up the driver,
Andy Shevchenko
[PATCH v1 1/1] spi: pxa2xx: Move PXA SSP bindings to the correct folder,
Andy Shevchenko
[PATCH v3 00/40] fsi: Add interrupt support,
Eddie James
- [PATCH v3 09/40] fsi: aspeed: Add AST2700 support, Eddie James
- [PATCH v3 02/40] fsi: Move slave definitions to fsi-slave.h, Eddie James
- [PATCH v3 04/40] fsi: Use a defined value for default echo delay, Eddie James
- [PATCH v3 08/40] fsi: core: Reset errors instead of clearing interrupts, Eddie James
- [PATCH v3 06/40] fsi: core: Improve master read/write/error traces, Eddie James
- [PATCH v3 01/40] fsi: hub: Set master index to link number plus one, Eddie James
- [PATCH v3 18/40] fsi: aspeed: Don't clear all IRQs during OPB transfers, Eddie James
- [PATCH v3 29/40] i2c: fsi: Remove list structure of ports, Eddie James
- [PATCH v3 31/40] i2c: fsi: Add boolean for skip stop command on abort, Eddie James
- [PATCH v3 05/40] fsi: Calculate local bus clock frequency, Eddie James
- [PATCH v3 10/40] fsi: core: Add slave spinlock, Eddie James
- [PATCH v3 26/40] i2c: fsi: Calculate clock divider from local bus frequency, Eddie James
- [PATCH v3 23/40] fsi: core: Add interrupt support, Eddie James
- [PATCH v3 13/40] fsi: core: Disable relative addressing during scan, Eddie James
- [PATCH v3 19/40] fsi: aspeed: Only read result register for successful read, Eddie James
- [PATCH v3 11/40] fsi: core: Allow cfam device type aliases, Eddie James
- [PATCH v3 03/40] fsi: Fix slave addressing after break command, Eddie James
- [PATCH v3 07/40] fsi: core: Add slave error trace, Eddie James
- [PATCH v3 38/40] spi: fsi: Calculate clock divider from local bus frequency, Eddie James
- [PATCH v3 21/40] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset, Eddie James
- [PATCH v3 34/40] fsi: core: Add master register read-only sysfs, Eddie James
- [PATCH v3 28/40] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer, Eddie James
- [PATCH v3 37/40] fsi: core: Add different types of CFAM, Eddie James
- [PATCH v3 39/40] ARM: dts: aspeed: P10 and tacoma: Set FSI clock frequency, Eddie James
- [PATCH v3 32/40] i2c: fsi: Add interrupt support, Eddie James
- [PATCH v3 30/40] i2c: fsi: Define a function to check status error bits, Eddie James
- [PATCH v3 14/40] fsi: hub: Use common initialization and link enable, Eddie James
- [PATCH v3 35/40] fsi: core: Add slave register read-only sysfs, Eddie James
- [PATCH v3 24/40] fsi: aspeed: Add interrupt support, Eddie James
- [PATCH v3 16/40] fsi: aspeed: Remove cfam reset sysfs file in error path and remove, Eddie James
- [PATCH v3 12/40] fsi: core: Add common regmap master functions, Eddie James
- [PATCH v3 36/40] fsi: i2cr: Adjust virtual CFAM ID to match Odyssey chip, Eddie James
- [PATCH v3 22/40] fsi: aspeed: Use common master error handler, Eddie James
- [PATCH v3 20/40] fsi: aspeed: Switch to spinlock, Eddie James
- [PATCH v3 33/40] fsi: hub master: Reset hub master after errors, Eddie James
- [PATCH v3 40/40] ARM: dts: aspeed: P10: Bump SPI max frequencies, Eddie James
- [PATCH v3 25/40] fsi: hub: Add interrupt support, Eddie James
- [PATCH v3 15/40] fsi: aspeed: Use common initialization and link enable, Eddie James
- [PATCH v3 17/40] fsi: aspeed: Refactor trace functions, Eddie James
- [PATCH v3 27/40] i2c: fsi: Improve formatting, Eddie James
[PATCH] spi: atmel-quadspi: Add missing check for clk_prepare, Chen Ni
[PATCH v5] spi: dt-bindings: Document the IBM FSI-attached SPI controller, Eddie James
[PATCH v2 0/3] Add support for GPIO based CS,
Prajna Rajendra Kumar
[PATCH v3] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema,
Kanak Shilledar
[GIT PULL] SPI updates for v6.10,
Mark Brown
[PATCH v2] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema,
Kanak Shilledar
[PATCH RFC v2 0/8] spi: axi-spi-engine: add offload support,
David Lechner
[PATCH v1 1/1] spi: Replace custom code with device_match_acpi_handle(),
Andy Shevchenko
[PATCH v1 1/1] spi: Refactor spi_stop_queue(),
Andy Shevchenko
spi: Inquiry Regarding Linux Kernel SPI Subsystem device drivers, Subhashini Rao Beerisetty
[GIT PULL] SPI fixes for v6.9-rc7,
Mark Brown
[PATCH] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema,
Kanak Shilledar
[PATCH v4 0/5] Marvell HW overlay support for Cadence xSPI,
Witold Sadowski
[PATCH] spi: axi-spi-engine: Add SPI_CS_HIGH support, David Lechner
[PATCH v1] spi: microchip-core-qspi: fix setting spi bus clock rate,
Conor Dooley
[PATCH] spi: dw: Bail out early on unsupported target mode,
Geert Uytterhoeven
[PATCH] spi: imx: Don't expect DMA for i.MX{25,35,50,51,53} cspi devices,
Uwe Kleine-König
- Re: [PATCH] spi: imx: Don't expect DMA for i.MX{25,35,50,51,53} cspi devices, Martin Kaiser
- Re: [PATCH] spi: imx: Don't expect DMA for i.MX{25,35,50,51,53} cspi devices, Mark Brown
[PATCH v5 0/7] Add QPIC SPI NAND driver,
Md Sadre Alam
[PATCH v3 0/2] Add optional reset control for Cadence SPI,
Ji Sheng Teoh
[PATCH v1 1/1] spi: Remove unneded check for orig_nents,
Andy Shevchenko
[PATCH] MAINTAINERS: repair file entry in AIROHA SPI SNFI DRIVER,
Lukas Bulwahn
[PATCH v1 1/1] spi: pxa2xx: Drop the stale entry in documentation TOC,
Andy Shevchenko
[PATCH v2] spi: omap2-mcspi: Ensure that CS is correctly asserted when switching from MULTI mode to SINGLE mode,
Louis Chauvet
[PATCH v2 1/1] spi: bitbang: Add missing MODULE_DESCRIPTION(),
Andy Shevchenko
[PATCH] spi: airoha: initialize as_ctrl at pointer declaration,
Lorenzo Bianconi
[GIT PULL] SPI fixes for v6.9-rc6,
Mark Brown
[PATCH v1 1/1] spi: bitbang: Add missing MODULE_DESCRIPTION(),
Andy Shevchenko
[PATCH v1 1/1] spi: bitbang: Use NSEC_PER_*SEC rather than hard coding,
Andy Shevchenko
[PATCH 0/3] Add support for GPIO based CS,
Prajna Rajendra Kumar
[PATCH v2 0/2] Add optional reset control for Cadence SPI,
Ji Sheng Teoh
[PATCH v3] spi: dt-bindings: ti,qspi: convert to dtschema,
Kousik Sanagavarapu
[PATCH v6 0/3] Add add spi-nand flash controller driver for EN7581,
Lorenzo Bianconi
[PATCH] spi: use spi_valid_{tx,rx}buf() in stats function,
David Lechner
[PATCH] spi: fix null pointer dereference within spi_sync,
Mans Rullgard
[PATCH v2 0/8] spi: use 'time_left' instead of 'timeout' with wait_for_*() functions,
Wolfram Sang
[PATCH 0/3] ARM: Modernize the PXA Spitz a bit,
Linus Walleij
[PATCH v4 00/17] ARM: dts: aspeed: Add IBM P11 BMC Boards,
Eddie James
- [PATCH v4 01/17] spi: dt-bindings: Document the IBM FSI-attached SPI controller, Eddie James
- [PATCH v4 06/17] dt-bindings: fsi: Document the FSI controller common properties, Eddie James
- [PATCH v4 02/17] dt-bindings: fsi: fsi2spi: Document SPI controller child nodes, Eddie James
- [PATCH v4 03/17] dt-bindings: fsi: Document the IBM SCOM engine, Eddie James
- [PATCH v4 05/17] dt-bindings: fsi: Document the IBM SBEFIFO engine, Eddie James
- [PATCH v4 07/17] dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller, Eddie James
- [PATCH v4 04/17] dt-bindings: fsi: p9-occ: Convert to json-schema, Eddie James
- [PATCH v4 08/17] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema, Eddie James
- [PATCH v4 10/17] dt-bindings: i2c: i2c-fsi: Convert to json-schema, Eddie James
- [PATCH v4 09/17] dt-bindings: fsi: Document the FSI Hub Controller, Eddie James
- [PATCH v4 17/17] fsi: scom: Update compatible string to match documentation, Eddie James
- [PATCH v4 13/17] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system, Eddie James
- [PATCH v4 12/17] ARM: dts: aspeed: Add IBM P11 FSI devices, Eddie James
- [PATCH v4 15/17] fsi: occ: Get device number from FSI minor number API, Eddie James
- [PATCH v4 14/17] ARM: dts: aspeed: Add IBM P11 Fuji BMC system, Eddie James
- [PATCH v4 11/17] dt-bindings: arm: aspeed: add IBM P11 BMC boards, Eddie James
- [PATCH v4 16/17] fsi: occ: Find next available child rather than node name match, Eddie James
[PATCH v2] spi: dt-bindings: ti,qspi: convert to dtschema,
Kousik Sanagavarapu
[PATCH 0/8] spi: use 'time_left' instead of 'timeout' with wait_for_*() functions,
Wolfram Sang
[PATCH v5 0/3] Add add SPI-NAND Flash controller driver for EN7581,
Lorenzo Bianconi
[RFC PATCH] spi: dt-bindings: ti,qspi: convert to dtschema,
Kousik Sanagavarapu
[PATCH v1 0/2] riscv: sophgo: add spi nor support for cv1800 series,
Jingbao Qiu
[PATCH v4 0/3] Add add SPI-NAND Flash controller driver for EN7581,
Lorenzo Bianconi
[PATCH v3 00/14] ARM: dts: aspeed: Add IBM P11 BMC Boards,
Eddie James
[Index of Archives]
[Security]
[Linux ARM]
[Fedora ARM]
[eCos]
[Linux MIPS]
[Bugtraq]
