Re: [PATCH v6 00/27] Add support for sam9x7 SoC family

[claudiu beznea <claudiu.beznea@xxxxxxxxx>]

On 29.07.2024 09:56, Varshini Rajendran wrote:
> This patch series adds support for the new SoC family - sam9x7.
>  - The device tree, configs and drivers are added
>  - Clock driver for sam9x7 is added
>  - Support for basic peripherals is added
>  - Target board SAM9X75 Curiosity is added

[ ... ]

> 
>  Changes in v6:
>  --------------
> 
>  - Addressed all the review comments in the patches
>  - Picked up all Acked-by and Reviewed-by tags
>  - Reverted the IRQ patch to that of version 3 of the same series
>  - All the specific changes are captured in the corresponding patches
> 

[ ... ]

> 
> Varshini Rajendran (26):
>   dt-bindings: atmel-sysreg: add sam9x7
>   ARM: at91: pm: add support for sam9x7 SoC family
>   ARM: at91: pm: add sam9x7 SoC init config
>   ARM: at91: add support in SoC driver for new sam9x7

Applied to at91-soc, thanks!

>   dt-bindings: clocks: atmel,at91sam9x5-sckc: add sam9x7
>   dt-bindings: clocks: atmel,at91rm9200-pmc: add sam9x7 clock controller
>   clk: at91: clk-sam9x60-pll: re-factor to support individual core freq
>     outputs
>   clk: at91: sam9x7: add support for HW PLL freq dividers
>   clk: at91: sama7g5: move mux table macros to header file
>   dt-bindings: clock: at91: Allow PLLs to be exported and referenced in
>     DT
>   clk: at91: sam9x7: add sam9x7 pmc driver

Applied to clk-microchip, thanks!

>   ARM: at91: Kconfig: add config flag for SAM9X7 SoC

Applied to at91-soc, thanks!

>   ARM: configs: at91: enable config flags for sam9x7 SoC family

Applied to at91-defconfig, thanks!