Linux SPI
[Prev Page][Next Page]
- Re: [PATCH v5 3/7] dt-bindings: mikrobus: Add mikrobus-spi binding, (continued)
- [PATCH] spi: axi-spi-engine: remove platform_set_drvdata(),
David Lechner
- [PATCH v5 0/7] Add support for AD4000 series of ADCs,
Marcelo Schmitt
- [PATCH 1/2] spi: spi-imx: Pass pm_ptr(),
Fabio Estevam
- [PATCH v2 1/2] spi: spi-imx: Switch to RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS(),
Fabio Estevam
- [PATCH 1/2] spi: spi-imx: Switch to RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS(),
Fabio Estevam
- [PATCH v3 0/2] spi: add devm_spi_optimize_message() helper,
David Lechner
- [PATCH v2 0/2] spi: add devm_spi_optimize_message() helper,
David Lechner
- [PATCH v4 0/3] spi: fsl-dspi: Convert to yaml format and use common SPI property,
Frank Li
- [PATCH] spi: davinci: Unset POWERDOWN bit when releasing resources,
Bastien Curutchet
- [GIT PULL] SPI fixes for v6.10-rc4,
Mark Brown
- [PATCH 0/3] spi: add devm_spi_optimize_message() helper,
David Lechner
- [PATCH v3 0/3] spi: fsl-dspi: Convert to yaml format and use common SPI property,
Frank Li
- [PATCH] spi: axi-spi-engine: fix sleep calculation,
David Lechner
- [no subject], Unknown
- [PATCH v9 0/9] Marvell HW overlay support for Cadence xSPI,
Witold Sadowski
- [PATCH v2 1/2] spi: cs42l43: Refactor accessing the SDCA extension properties,
Charles Keepax
- [PATCH v4 0/6] Add support for AD4000 series of ADCs,
Marcelo Schmitt
- [PATCH] spi: spi-imx: imx51: revert burst length calculation back to bits_per_word,
Marc Kleine-Budde
- [PATCH 0/3] spi: OCTAL mode fixes,
patrice.chotard
- [PATCH 1/1] spi: spi-cadence: Enable spi refclk in slave mode,
Amit Kumar Mahapatra
- [PATCH 1/1] spi: Fix SPI slave probe failure,
Amit Kumar Mahapatra
- [PATCH v10 00/38] ep93xx device tree conversion,
Nikita Shubin via B4 Relay
- [PATCH v2] dt-bindings: drop stale Anson Huang from maintainers,
Krzysztof Kozlowski
- [PATCH] spi: omap2-mcspi: consider gpiod chip selects.,
alain . peteut
- [PATCH] dt-bindings: drop stale Anson Huang from maintainers,
Krzysztof Kozlowski
- [PATCH v2 0/3] spi: fsl-dspi: Convert to yaml format and use common SPI property,
Frank Li
- [REGRESSION] spi: omap2-mcspi: not working with kernel v6.10,
João Paulo Gonçalves
- [RFC v1 0/3] mmc-spi - support controllers incapable of getting as low as 400KHz,
Conor Dooley
- [PATCH] spi: meson-spicc: add spicc loopback mode,
Xianwei Zhao via B4 Relay
- [PATCH 1/3] spi: cs42l43: Refactor accessing the SDCA extension properties,
Charles Keepax
- [PATCH] spi: add missing MODULE_DESCRIPTION() macros,
Jeff Johnson
- [PATCH v8 0/4] Marvell HW overlay support for Cadence xSPI,
Witold Sadowski
- [PATCH] spi: cs42l43: Drop cs35l56 SPI speed down to 11MHz,
Charles Keepax
- IMA Reports No TPM Device,
Thangavel, Karthik
- [PATCH v1 1/1] virtio-can: Add link to CAN specification from ISO.,
Harald Mommer
- [PATCH v4 00/40] fsi: Add interrupt support,
Eddie James
- [PATCH v4 04/40] fsi: Use a defined value for default echo delay, Eddie James
- [PATCH v4 06/40] fsi: core: Improve master read/write/error traces, Eddie James
- [PATCH v4 10/40] fsi: core: Add slave spinlock, Eddie James
- [PATCH v4 01/40] fsi: hub: Set master index to link number plus one, Eddie James
- [PATCH v4 14/40] fsi: hub: Use common initialization and link enable, Eddie James
- [PATCH v4 07/40] fsi: core: Add slave error trace, Eddie James
- [PATCH v4 09/40] fsi: aspeed: Add AST2700 support, Eddie James
- [PATCH v4 02/40] fsi: Move slave definitions to fsi-slave.h, Eddie James
- [PATCH v4 16/40] fsi: aspeed: Remove cfam reset sysfs file in error path and remove, Eddie James
- [PATCH v4 05/40] fsi: Calculate local bus clock frequency, Eddie James
- [PATCH v4 25/40] fsi: hub: Add interrupt support, Eddie James
- [PATCH v4 13/40] fsi: core: Disable relative addressing during scan, Eddie James
- [PATCH v4 19/40] fsi: aspeed: Only read result register for successful read, Eddie James
- [PATCH v4 18/40] fsi: aspeed: Don't clear all IRQs during OPB transfers, Eddie James
- [PATCH v4 08/40] fsi: core: Reset errors instead of clearing interrupts, Eddie James
- [PATCH v4 30/40] i2c: fsi: Define a function to check status error bits, Eddie James
- [PATCH v4 26/40] i2c: fsi: Calculate clock divider from local bus frequency, Eddie James
- [PATCH v4 12/40] fsi: core: Add common regmap master functions, Eddie James
- [PATCH v4 31/40] i2c: fsi: Add boolean for skip stop command on abort, Eddie James
- [PATCH v4 29/40] i2c: fsi: Remove list structure of ports, Eddie James
- [PATCH v4 15/40] fsi: aspeed: Use common initialization and link enable, Eddie James
- [PATCH v4 24/40] fsi: aspeed: Add interrupt support, Eddie James
- [PATCH v4 27/40] i2c: fsi: Improve formatting, Eddie James
- [PATCH v4 21/40] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset, Eddie James
- [PATCH v4 39/40] ARM: dts: aspeed: P10 and tacoma: Set FSI clock frequency, Eddie James
- [PATCH v4 23/40] fsi: core: Add interrupt support, Eddie James
- [PATCH v4 03/40] fsi: Fix slave addressing after break command, Eddie James
- [PATCH v4 35/40] fsi: core: Add slave register read-only sysfs, Eddie James
- [PATCH v4 28/40] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer, Eddie James
- [PATCH v4 17/40] fsi: aspeed: Refactor trace functions, Eddie James
- [PATCH v4 37/40] fsi: core: Add different types of CFAM, Eddie James
- [PATCH v4 20/40] fsi: aspeed: Switch to spinlock, Eddie James
- [PATCH v4 34/40] fsi: core: Add master register read-only sysfs, Eddie James
- [PATCH v4 36/40] fsi: i2cr: Adjust virtual CFAM ID to match Odyssey chip, Eddie James
- [PATCH v4 11/40] fsi: core: Allow cfam device type aliases, Eddie James
- [PATCH v4 38/40] spi: fsi: Calculate clock divider from local bus frequency, Eddie James
- [PATCH v4 22/40] fsi: aspeed: Use common master error handler, Eddie James
- [PATCH v4 32/40] i2c: fsi: Add interrupt support, Eddie James
- [PATCH v4 40/40] ARM: dts: aspeed: P10: Bump SPI max frequencies, Eddie James
- [PATCH v4 33/40] fsi: hub master: Reset hub master after errors, Eddie James
- Re: [PATCH v4 00/40] fsi: Add interrupt support, Andrew Jeffery
- [PATCH AUTOSEL 6.1 12/14] spi: cadence: Ensure data lines set to low during dummy-cycle period, Sasha Levin
- [PATCH AUTOSEL 6.6 13/18] spi: cadence: Ensure data lines set to low during dummy-cycle period, Sasha Levin
- [PATCH AUTOSEL 6.8 13/18] spi: cadence: Ensure data lines set to low during dummy-cycle period, Sasha Levin
- [PATCH AUTOSEL 6.9 17/23] spi: cadence: Ensure data lines set to low during dummy-cycle period, Sasha Levin
- [PATCH] dt-bindings: spi: amlogic,a1-spifc: add missing power-domains,
Neil Armstrong
- omap2-mcspi multi mode,
Colin Foster
- [PATCH v3 0/6] Add support for AD4000 series of ADCs,
Marcelo Schmitt
- [PATCH] spi: cs42l43: Correct SPI root clock speed,
Charles Keepax
- [PATCH v1 0/8] spi: Rework DMA mapped flag,
Andy Shevchenko
- [PATCH v1 1/8] spi: Introduce internal spi_xfer_is_dma_mapped() helper, Andy Shevchenko
- [PATCH v1 2/8] spi: dw: Use new spi_xfer_is_dma_mapped() helper, Andy Shevchenko
- [PATCH v1 3/8] spi: ingenic: Use new spi_xfer_is_dma_mapped() helper, Andy Shevchenko
- [PATCH v1 4/8] spi: omap2-mcspi: Use new spi_xfer_is_dma_mapped() helper, Andy Shevchenko
- [PATCH v1 5/8] spi: pxa2xx: Use new spi_xfer_is_dma_mapped() helper, Andy Shevchenko
- [PATCH v1 7/8] spi: qup: Use new spi_xfer_is_dma_mapped() helper, Andy Shevchenko
- [PATCH v1 6/8] spi: pci1xxxx: Use new spi_xfer_is_dma_mapped() helper, Andy Shevchenko
- [PATCH v1 8/8] spi: Rework per message DMA mapped flag to be per transfer, Andy Shevchenko
- Re: [PATCH v1 0/8] spi: Rework DMA mapped flag, Neil Armstrong
- Re: [PATCH v1 0/8] spi: Rework DMA mapped flag, Nícolas F. R. A. Prado
- [GIT PULL] SPI fixes for v6.10-rc1,
Mark Brown
- [RESEND v3] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema,
Kanak Shilledar
- [PATCH v1 0/2] spi: Make dummy SG handling robust,
Andy Shevchenko
- [PATCH v2 00/11] spi: pxa2xx: Get rid of an additional layer in PCI driver,
Andy Shevchenko
- [PATCH v2 01/11] spi: pxa2xx: Wrap pxa_ssp_request() to be device managed resource, Andy Shevchenko
- [PATCH v2 03/11] spi: pxa2xx: Remove no more needed driver data, Andy Shevchenko
- [PATCH v2 04/11] spi: pxa2xx: Remove hard coded number of chip select pins, Andy Shevchenko
- [PATCH v2 02/11] spi: pxa2xx: Reorganize the SSP type retrieval, Andy Shevchenko
- [PATCH v2 05/11] spi: pxa2xx: Utilise temporary variable for struct device, Andy Shevchenko
- [PATCH v2 08/11] spi: pxa2xx: Remove superflous check for Intel Atom SoCs, Andy Shevchenko
- [PATCH v2 06/11] spi: pxa2xx: Print DMA burst size only when DMA is enabled, Andy Shevchenko
- [PATCH v2 09/11] spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks, Andy Shevchenko
- [PATCH v2 07/11] spi: pxa2xx: Remove duplicate check, Andy Shevchenko
- [PATCH v2 11/11] spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly, Andy Shevchenko
- [PATCH v2 10/11] spi: pxa2xx: Move platform driver to a separate file, Andy Shevchenko
- Re: [PATCH v2 00/11] spi: pxa2xx: Get rid of an additional layer in PCI driver, Mark Brown
- [PATCH v7 0/4] Marvell HW overlay support for Cadence xSPI,
Witold Sadowski
- [PATCH 1/1] spi: dt-bindings: fsl-dspi: Convert to yaml format,
Frank Li
- [PATCH] spi: Assign dummy scatterlist to unidirectional transfers,
Nícolas F. R. A. Prado
- [PATCH v6 0/5] Marvell HW overlay support for Cadence xSPI,
Witold Sadowski
- [PATCH v5 0/5] Marvell HW overlay support for Cadence xSPI,
Witold Sadowski
- [PATCH 00/18] BCM2835 DMA mapping cleanups and fixes,
Dave Stevenson
- [PATCH 01/18] dma-direct: take dma-ranges/offsets into account in resource mapping, Dave Stevenson
- [PATCH 03/18] ARM: dts: bcm283x: Update to use dma-channel-mask, Dave Stevenson
- [PATCH 02/18] dmaengine: bcm2835: Support common dma-channel-mask, Dave Stevenson
- [PATCH 04/18] dmaengine: bcm2835: move CB info generation into separate function, Dave Stevenson
- [PATCH 05/18] dmaengine: bcm2835: move CB final extra info generation into function, Dave Stevenson
- [PATCH 07/18] dmaengine: bcm2385: drop info parameters, Dave Stevenson
- [PATCH 06/18] dmaengine: bcm2835: make address increment platform independent, Dave Stevenson
- [PATCH 08/18] dmaengine: bcm2835: pass dma_chan to generic functions, Dave Stevenson
- [PATCH 10/18] dmaengine: bcm2835: Add backwards compatible handling until clients updated, Dave Stevenson
- [PATCH 11/18] dmaengine: bcm2835: Use dma_map_resource to map addresses, Dave Stevenson
- [PATCH 09/18] dmaengine: bcm2835: Add function to handle DMA mapping, Dave Stevenson
- [PATCH 15/18] spi: bcm2835: Use phys addresses for slave DMA config, Dave Stevenson
- [PATCH 12/18] dmaengine: bcm2835: Read ranges if dma-ranges aren't mapped, Dave Stevenson
- [PATCH 16/18] drm/vc4: Use phys addresses for slave DMA config, Dave Stevenson
- [PATCH 14/18] mmc: bcm2835: Use phys addresses for slave DMA config, Dave Stevenson
- [PATCH 17/18] ASoC: bcm2835-i2s: Use phys addresses for DAI DMA, Dave Stevenson
- [PATCH 13/18] arm: dt: Add dma-ranges to the bcm283x platforms, Dave Stevenson
- [PATCH 18/18] dmaengine: bcm2835: Revert the workaround for DMA addresses, Dave Stevenson
- Re: [PATCH 00/18] BCM2835 DMA mapping cleanups and fixes, Florian Fainelli
- [PATCH] spi: meson-spicc: set SPI clock flag CLK_SET_RATE_PARENT,
Xianwei Zhao via B4 Relay
- [PATCH] spi: stm32: Revert change that enabled controller before asserting CS,
Uwe Kleine-König
- [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems,
Eddie James
- [PATCH v6 01/20] spi: dt-bindings: Document the IBM FSI-attached SPI controller, Eddie James
- [PATCH v6 04/20] dt-bindings: fsi: p9-occ: Convert to json-schema, Eddie James
- [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system, Eddie James
- [PATCH v6 10/20] dt-bindings: fsi: Document the FSI Hub Controller, Eddie James
- [PATCH v6 19/20] fsi: occ: Find next available child rather than node name match, Eddie James
- [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema, Eddie James
- [PATCH v6 18/20] fsi: occ: Get device number from FSI minor number API, Eddie James
- [PATCH v6 02/20] dt-bindings: fsi: fsi2spi: Document SPI controller child nodes, Eddie James
- [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine, Eddie James
- [PATCH v6 08/20] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema, Eddie James
- [PATCH v6 07/20] dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller, Eddie James
- [PATCH v6 09/20] dt-bindings: fsi: Document the AST2700 FSI controller, Eddie James
- [PATCH v6 05/20] dt-bindings: fsi: Document the IBM SBEFIFO engine, Eddie James
- [PATCH v6 12/20] dt-bindings: arm: aspeed: add IBM P11 BMC boards, Eddie James
- [PATCH v6 20/20] fsi: scom: Update compatible string to match documentation, Eddie James
- [PATCH v6 15/20] ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC system, Eddie James
- [PATCH v6 14/20] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system, Eddie James
- [PATCH v6 06/20] dt-bindings: fsi: Document the FSI controller common properties, Eddie James
- [PATCH v6 13/20] ARM: dts: aspeed: Add IBM P11 FSI devices, Eddie James
- [PATCH v6 16/20] ARM: dts: aspeed: Add IBM P11 Fuji BMC system, Eddie James
Re: [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems, Eddie James
Re: [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems, Rob Herring
[PATCH v1 0/2] soi: Don't call DMA sync API when not needed,
Andy Shevchenko
[PATCH 0/4] spi: differentiate between unsupported and invalid requests,
Miquel Raynal
[PATCH] spi: dt-bindings: marvell,mmp2-ssp: Merge PXA SSP into schema,
Rob Herring (Arm)
[PATCH v6 0/8] Add QPIC SPI NAND driver,
Md Sadre Alam
[PATCH] spi: stm32: Don't warn about spurious interrupts,
Uwe Kleine-König
[PATCH] spi: imx: remove empty cleanup function, Martin Kaiser
[PATCH v2] spidev: Introduce "linux,spidev-name" property for device tree of spidev.,
egyszeregy
[PATCH] spidev: Introduce "linux,spidev-name" property for device tree of spidev.,
egyszeregy
From Financial Crimes Enforcement Network, Financial Crimes Enforcement Network
[PATCH v1 00/10] spi: pxa2xx: Get rid of an additional layer in PCI driver,
Andy Shevchenko
- [PATCH v1 01/10] spi: pxa2xx: Reorganize the SSP type retrieval, Andy Shevchenko
- [PATCH v1 02/10] spi: pxa2xx: Remove no more needed driver data, Andy Shevchenko
- [PATCH v1 03/10] spi: pxa2xx: Remove hard coded number of chip select pins, Andy Shevchenko
- [PATCH v1 04/10] spi: pxa2xx: Utilise temporary variable for struct device, Andy Shevchenko
- [PATCH v1 06/10] spi: pxa2xx: Remove duplicate check, Andy Shevchenko
- [PATCH v1 05/10] spi: pxa2xx: Print DMA burst size only when DMA is enabled, Andy Shevchenko
- [PATCH v1 08/10] spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks, Andy Shevchenko
- [PATCH v1 09/10] spi: pxa2xx: Move platform driver to a separate file, Andy Shevchenko
- [PATCH v1 07/10] spi: pxa2xx: Remove superflous check for Intel Atom SoCs, Andy Shevchenko
- [PATCH v1 10/10] spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly, Andy Shevchenko
rv1108: SPI DMA failure, Fabio Estevam
[PATCH v1 0/3] spi: gpio: Convert to be used outside of OF,
Andy Shevchenko
[PATCH v1 0/3] spi: bitbang: Clean up the driver,
Andy Shevchenko
[PATCH v1 1/1] spi: pxa2xx: Move PXA SSP bindings to the correct folder,
Andy Shevchenko
[PATCH v3 00/40] fsi: Add interrupt support,
Eddie James
- [PATCH v3 09/40] fsi: aspeed: Add AST2700 support, Eddie James
- [PATCH v3 02/40] fsi: Move slave definitions to fsi-slave.h, Eddie James
- [PATCH v3 04/40] fsi: Use a defined value for default echo delay, Eddie James
- [PATCH v3 08/40] fsi: core: Reset errors instead of clearing interrupts, Eddie James
- [PATCH v3 06/40] fsi: core: Improve master read/write/error traces, Eddie James
- [PATCH v3 01/40] fsi: hub: Set master index to link number plus one, Eddie James
- [PATCH v3 18/40] fsi: aspeed: Don't clear all IRQs during OPB transfers, Eddie James
- [PATCH v3 29/40] i2c: fsi: Remove list structure of ports, Eddie James
- [PATCH v3 31/40] i2c: fsi: Add boolean for skip stop command on abort, Eddie James
- [PATCH v3 05/40] fsi: Calculate local bus clock frequency, Eddie James
- [PATCH v3 10/40] fsi: core: Add slave spinlock, Eddie James
- [PATCH v3 26/40] i2c: fsi: Calculate clock divider from local bus frequency, Eddie James
- [PATCH v3 23/40] fsi: core: Add interrupt support, Eddie James
[Index of Archives]
[Security]
[Linux ARM]
[Fedora ARM]
[eCos]
[Linux MIPS]
[Bugtraq]
