Re: [PATCH v4 3/3] spi: geni-qcom: Use devm functions to simplify code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed, Sep 11, 2024 at 8:53 PM Jinjie Ruan <ruanjinjie@xxxxxxxxxx> wrote:
>
> >> @@ -1132,6 +1134,12 @@ static int spi_geni_probe(struct platform_device *pdev)
> >>         if (ret)
> >>                 return ret;
> >>
> >> +       ret = devm_add_action_or_reset(dev, spi_geni_release_dma_chan, mas);
> >> +       if (ret) {
> >> +               dev_err(dev, "Unable to add action.\n");
> >> +               return ret;
> >> +       }
> >
> > Use dev_err_probe() to simplify.
> >
> > ret = devm_add_action_or_reset(dev, spi_geni_release_dma_chan, mas);
> > if (ret)
> >   return dev_err_probe(dev, ret, "Unable to add action.\n");
>
> It seems that if it only return -ENOMEM or 0, using dev_err_probe() has
> not not much value for many community maintainers.

While I won't insist, it still has some value to use dev_err_probe()
as I talked about in commit 7065f92255bb ("driver core: Clarify that
dev_err_probe() is OK even w/out -EPROBE_DEFER").

-Doug





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux