Re: [PATCH 2/2] dt-bindings: trivial-devices: Add a reference to spi-peripheral-props.yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Aug 30, 2024 at 01:05:09PM -0500, Rob Herring wrote:
> On Fri, Aug 30, 2024 at 04:17:02PM +0100, Conor Dooley wrote:
> > On Fri, Aug 30, 2024 at 12:05:20PM -0300, Fabio Estevam wrote:
> > > Hi Conor,
> > > 
> > > On Fri, Aug 30, 2024 at 11:14 AM Conor Dooley <conor@xxxxxxxxxx> wrote:
> > > 
> > > > Since those don't come from spi-peripheral-props, not really the correct
> > > > justification (although why they don't, I'm not sure). If you still saw
> > > > dtbs_check complaints after the first patch, I maybe the controller
> > > > schema is missing a reference to spi-controller.yaml?
> > > 
> > > I changed the first patch as suggested:
> > > 
> > > --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
> > > +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
> > > @@ -29,6 +29,10 @@ properties:
> > >      description:
> > >        Chip select used by the device.
> > > 
> > > +  spi-cpha: true
> > > +
> > > +  spi-cpol: true
> > > +
> > >    spi-cs-high:
> > >      $ref: /schemas/types.yaml#/definitions/flag
> > >      description:
> > > 
> > > spi-rockchip.yaml does reference spi-controller.yaml, but I still get
> > > dtbs_check complaints after the first patch.
> > > 
> > > $ make CHECK_DTBS=y rockchip/rv1108-elgin-r1.dtb -j12
> > >   UPD     include/config/kernel.release
> > >   SCHEMA  Documentation/devicetree/bindings/processed-schema.json
> > >   DTC [C] arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dtb
> > > /home/fabio/linux-next/arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dtb:
> > > display@0: 'spi-cpha', 'spi-cpol' do not match any of the regexes:
> > > 'pinctrl-[0-9]+'
> > > from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > 
> > > I would appreciate some suggestions on how to fix this warning.
> > 
> > Ah, I think I suggested something garbage, because I misread the diff,
> > as my quoted mail evidences. I was really trying to suggest putting
> > spi-cpha: true
> > spi-cpol: true
> > in trivial-devices.yaml, but I didn't notice that the patch was to
> > spi-peripheral-props rather than trivial-devices. These properties are
> > defined (for reasons I don't quite understand) in spi-controller.yaml
> > and applied to children of the controller node by that binding and I
> > wanted to avoid the redefinition.
> 
> I steered Fabio wrong...
> 
> I think we originally had these in spi-peripheral-props, but then 
> decided they are properties of the device, not the controller.

I don't follow, how would them being properties of the "device", make them
unsuitable for spi-peripheral-props? Is the differentiation supposed to
be that the things in spi-peripheral-props are actually there to do
per-"device" tweaks for special controller features and the things
applied by spi-controller to child nodes of SPI buses are the ones that
describe requirements of the device?

Even if that is a rather WTF responsibility distribution between files
(partly that's down to naming), the usage does make sense.
spi-peripheral-props can be unconditionally included by all SPI devices,
since the controller determines what properties are relevant, and spa-cpha
etc only get permitted when explicitly set as "true".

> These 
> properties should really only be needed if the device supports different 
> modes. If what a device supports is fixed, then that can be implicit.

Right. That's very inconsistently done though, even if it makes sense.
I'd wager there are very few devices that actually support both
configurations but conversely very few drivers for active-high-only
devices that don't rely on the spi-cs-active-high (or w/e it is)
property to function correctly.

I should send a patch for pcf2123 to make it required, because that is
the one I know for sure requires active high off the top of my head.

> 
> There's one other case I see with "dh,dhcom-board". So I guess add 
> spi-cpha and spi-cpol directly to trivial-devices.yaml.
> 
> Rob

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux