Re: [PATCH v9 5/6] spi: mxic: Add support for swapping byte

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jul 18, 2024 at 11:46:13AM +0800, AlvinZhou wrote:
> From: AlvinZhou <alvinzhou@xxxxxxxxxxx>
> 
> Some SPI-NOR flash swap the bytes on a 16-bit boundary when
> configured in Octal DTR mode. It means data format D0 D1 D2 D3
> would be swapped to D1 D0 D3 D2. So that whether controller
> support swapping bytes should be checked before enable Octal
> DTR mode. Add swap byte support on a 16-bit boundary when
> configured in Octal DTR mode for Macronix xSPI host controller
> dirver.

driver

Acked-by: Mark Brown <broonie@xxxxxxxxxx>

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux