[PATCH v10 15/38] spi: ep93xx: add DT support for Cirrus EP93xx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>

- add OF ID match table
- add device tree DMA request, so we can probe defer, in case DMA is not
  ready yet
- drop DMA platform code

Signed-off-by: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Tested-by: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
Acked-by: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
Reviewed-by: Mark Brown <broonie@xxxxxxxxxx>
---
 drivers/spi/spi-ep93xx.c | 66 +++++++++++++++++-------------------------------
 1 file changed, 23 insertions(+), 43 deletions(-)

diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index a1d60e51c053..ffbe0d522bce 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -18,18 +18,18 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
 #include <linux/bitops.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/property.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/scatterlist.h>
 #include <linux/spi/spi.h>
 
-#include <linux/platform_data/dma-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-
 #define SSPCR0			0x0000
 #define SSPCR0_SPO		BIT(6)
 #define SSPCR0_SPH		BIT(7)
@@ -92,8 +92,6 @@ struct ep93xx_spi {
 	size_t				fifo_level;
 	struct dma_chan			*dma_rx;
 	struct dma_chan			*dma_tx;
-	struct ep93xx_dma_data		dma_rx_data;
-	struct ep93xx_dma_data		dma_tx_data;
 	struct sg_table			rx_sgt;
 	struct sg_table			tx_sgt;
 	void				*zeropage;
@@ -575,46 +573,23 @@ static int ep93xx_spi_unprepare_hardware(struct spi_controller *host)
 	return 0;
 }
 
-static bool ep93xx_spi_dma_filter(struct dma_chan *chan, void *filter_param)
+static int ep93xx_spi_setup_dma(struct device *dev, struct ep93xx_spi *espi)
 {
-	if (ep93xx_dma_chan_is_m2p(chan))
-		return false;
-
-	chan->private = filter_param;
-	return true;
-}
-
-static int ep93xx_spi_setup_dma(struct ep93xx_spi *espi)
-{
-	dma_cap_mask_t mask;
 	int ret;
 
 	espi->zeropage = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!espi->zeropage)
 		return -ENOMEM;
 
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-
-	espi->dma_rx_data.port = EP93XX_DMA_SSP;
-	espi->dma_rx_data.direction = DMA_DEV_TO_MEM;
-	espi->dma_rx_data.name = "ep93xx-spi-rx";
-
-	espi->dma_rx = dma_request_channel(mask, ep93xx_spi_dma_filter,
-					   &espi->dma_rx_data);
-	if (!espi->dma_rx) {
-		ret = -ENODEV;
+	espi->dma_rx = dma_request_chan(dev, "rx");
+	if (IS_ERR(espi->dma_rx)) {
+		ret = dev_err_probe(dev, PTR_ERR(espi->dma_rx), "rx DMA setup failed");
 		goto fail_free_page;
 	}
 
-	espi->dma_tx_data.port = EP93XX_DMA_SSP;
-	espi->dma_tx_data.direction = DMA_MEM_TO_DEV;
-	espi->dma_tx_data.name = "ep93xx-spi-tx";
-
-	espi->dma_tx = dma_request_channel(mask, ep93xx_spi_dma_filter,
-					   &espi->dma_tx_data);
-	if (!espi->dma_tx) {
-		ret = -ENODEV;
+	espi->dma_tx = dma_request_chan(dev, "tx");
+	if (IS_ERR(espi->dma_tx)) {
+		ret = dev_err_probe(dev, PTR_ERR(espi->dma_tx), "tx DMA setup failed");
 		goto fail_release_rx;
 	}
 
@@ -647,18 +622,11 @@ static void ep93xx_spi_release_dma(struct ep93xx_spi *espi)
 static int ep93xx_spi_probe(struct platform_device *pdev)
 {
 	struct spi_controller *host;
-	struct ep93xx_spi_info *info;
 	struct ep93xx_spi *espi;
 	struct resource *res;
 	int irq;
 	int error;
 
-	info = dev_get_platdata(&pdev->dev);
-	if (!info) {
-		dev_err(&pdev->dev, "missing platform data\n");
-		return -EINVAL;
-	}
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
@@ -713,12 +681,17 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
 		goto fail_release_host;
 	}
 
-	if (info->use_dma && ep93xx_spi_setup_dma(espi))
+	error = ep93xx_spi_setup_dma(&pdev->dev, espi);
+	if (error == -EPROBE_DEFER)
+		goto fail_release_host;
+
+	if (error)
 		dev_warn(&pdev->dev, "DMA setup failed. Falling back to PIO\n");
 
 	/* make sure that the hardware is disabled */
 	writel(0, espi->mmio + SSPCR1);
 
+	device_set_node(&host->dev, dev_fwnode(&pdev->dev));
 	error = devm_spi_register_controller(&pdev->dev, host);
 	if (error) {
 		dev_err(&pdev->dev, "failed to register SPI host\n");
@@ -746,9 +719,16 @@ static void ep93xx_spi_remove(struct platform_device *pdev)
 	ep93xx_spi_release_dma(espi);
 }
 
+static const struct of_device_id ep93xx_spi_of_ids[] = {
+	{ .compatible = "cirrus,ep9301-spi" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ep93xx_spi_of_ids);
+
 static struct platform_driver ep93xx_spi_driver = {
 	.driver		= {
 		.name	= "ep93xx-spi",
+		.of_match_table = ep93xx_spi_of_ids,
 	},
 	.probe		= ep93xx_spi_probe,
 	.remove_new	= ep93xx_spi_remove,

-- 
2.43.2






[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux