[PATCH v6 2/7] spi: bitbang: Implement support for MOSI idle state configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some SPI peripherals may require strict MOSI line state when the controller
is not clocking out data.
Implement support for MOSI idle state configuration (low or high) by
setting the data output line level on controller setup and after transfers.
Bitbang operations now call controller specific set_mosi_idle() call back
to set MOSI to its idle state.
The MOSI line is kept at its idle state if no tx buffer is provided.

Acked-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
Reviewed-by: David Lechner <dlechner@xxxxxxxxxxxx>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
---
 drivers/spi/spi-bitbang.c       | 24 ++++++++++++++++++++++++
 include/linux/spi/spi_bitbang.h |  1 +
 2 files changed, 25 insertions(+)

diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index ca5cc67555c5..8cc522bf444c 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -63,21 +63,28 @@ static unsigned bitbang_txrx_8(
 	unsigned flags
 )
 {
+	struct spi_bitbang	*bitbang;
 	unsigned		bits = t->bits_per_word;
 	unsigned		count = t->len;
 	const u8		*tx = t->tx_buf;
 	u8			*rx = t->rx_buf;
 
+	bitbang = spi_controller_get_devdata(spi->controller);
 	while (likely(count > 0)) {
 		u8		word = 0;
 
 		if (tx)
 			word = *tx++;
+		else
+			word = spi->mode & SPI_MOSI_IDLE_HIGH ? 0xFF : 0;
 		word = txrx_word(spi, ns, word, bits, flags);
 		if (rx)
 			*rx++ = word;
 		count -= 1;
 	}
+	if (bitbang->set_mosi_idle)
+		bitbang->set_mosi_idle(spi);
+
 	return t->len - count;
 }
 
@@ -92,21 +99,28 @@ static unsigned bitbang_txrx_16(
 	unsigned flags
 )
 {
+	struct spi_bitbang	*bitbang;
 	unsigned		bits = t->bits_per_word;
 	unsigned		count = t->len;
 	const u16		*tx = t->tx_buf;
 	u16			*rx = t->rx_buf;
 
+	bitbang = spi_controller_get_devdata(spi->controller);
 	while (likely(count > 1)) {
 		u16		word = 0;
 
 		if (tx)
 			word = *tx++;
+		else
+			word = spi->mode & SPI_MOSI_IDLE_HIGH ? 0xFFFF : 0;
 		word = txrx_word(spi, ns, word, bits, flags);
 		if (rx)
 			*rx++ = word;
 		count -= 2;
 	}
+	if (bitbang->set_mosi_idle)
+		bitbang->set_mosi_idle(spi);
+
 	return t->len - count;
 }
 
@@ -121,21 +135,28 @@ static unsigned bitbang_txrx_32(
 	unsigned flags
 )
 {
+	struct spi_bitbang	*bitbang;
 	unsigned		bits = t->bits_per_word;
 	unsigned		count = t->len;
 	const u32		*tx = t->tx_buf;
 	u32			*rx = t->rx_buf;
 
+	bitbang = spi_controller_get_devdata(spi->controller);
 	while (likely(count > 3)) {
 		u32		word = 0;
 
 		if (tx)
 			word = *tx++;
+		else
+			word = spi->mode & SPI_MOSI_IDLE_HIGH ? 0xFFFFFFFF : 0;
 		word = txrx_word(spi, ns, word, bits, flags);
 		if (rx)
 			*rx++ = word;
 		count -= 4;
 	}
+	if (bitbang->set_mosi_idle)
+		bitbang->set_mosi_idle(spi);
+
 	return t->len - count;
 }
 
@@ -211,6 +232,9 @@ int spi_bitbang_setup(struct spi_device *spi)
 			goto err_free;
 	}
 
+	if (bitbang->set_mosi_idle)
+		bitbang->set_mosi_idle(spi);
+
 	dev_dbg(&spi->dev, "%s, %u nsec/bit\n", __func__, 2 * cs->nsecs);
 
 	return 0;
diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h
index b930eca2ef7b..1a54b593c691 100644
--- a/include/linux/spi/spi_bitbang.h
+++ b/include/linux/spi/spi_bitbang.h
@@ -22,6 +22,7 @@ struct spi_bitbang {
 #define	BITBANG_CS_ACTIVE	1	/* normally nCS, active low */
 #define	BITBANG_CS_INACTIVE	0
 
+	void	(*set_mosi_idle)(struct spi_device *spi);
 	/* txrx_bufs() may handle dma mapping for transfers that don't
 	 * already have one (transfer.{tx,rx}_dma is zero), or use PIO
 	 */
-- 
2.43.0





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux