Linux SPI
[Prev Page][Next Page]
- [PATCH v4 27/40] i2c: fsi: Improve formatting
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 24/40] fsi: aspeed: Add interrupt support
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 15/40] fsi: aspeed: Use common initialization and link enable
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 29/40] i2c: fsi: Remove list structure of ports
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 00/40] fsi: Add interrupt support
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 31/40] i2c: fsi: Add boolean for skip stop command on abort
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 12/40] fsi: core: Add common regmap master functions
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 26/40] i2c: fsi: Calculate clock divider from local bus frequency
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 30/40] i2c: fsi: Define a function to check status error bits
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 08/40] fsi: core: Reset errors instead of clearing interrupts
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 18/40] fsi: aspeed: Don't clear all IRQs during OPB transfers
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 19/40] fsi: aspeed: Only read result register for successful read
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 13/40] fsi: core: Disable relative addressing during scan
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 25/40] fsi: hub: Add interrupt support
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 05/40] fsi: Calculate local bus clock frequency
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 16/40] fsi: aspeed: Remove cfam reset sysfs file in error path and remove
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 02/40] fsi: Move slave definitions to fsi-slave.h
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 09/40] fsi: aspeed: Add AST2700 support
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 07/40] fsi: core: Add slave error trace
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 14/40] fsi: hub: Use common initialization and link enable
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 01/40] fsi: hub: Set master index to link number plus one
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 10/40] fsi: core: Add slave spinlock
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 06/40] fsi: core: Improve master read/write/error traces
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 04/40] fsi: Use a defined value for default echo delay
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH v1 3/3] spi: gpio: Make num_chipselect 8-bit in the struct spi_gpio_platform_data
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Replace custom code with device_match_acpi_handle()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Refactor spi_stop_queue()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v1 0/3] spi: bitbang: Clean up the driver
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v1 5/8] spi: pxa2xx: Use new spi_xfer_is_dma_mapped() helper
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 3/3] spi: gpio: Make num_chipselect 8-bit in the struct spi_gpio_platform_data
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Replace custom code with device_match_acpi_handle()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Refactor spi_stop_queue()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 0/3] spi: bitbang: Clean up the driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 6/6] iio: adc: Add support for AD4000
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 16/18] drm/vc4: Use phys addresses for slave DMA config
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH 11/18] dmaengine: bcm2835: Use dma_map_resource to map addresses
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH 09/18] dmaengine: bcm2835: Add function to handle DMA mapping
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH 08/18] dmaengine: bcm2835: pass dma_chan to generic functions
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH 07/18] dmaengine: bcm2385: drop info parameters
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH 06/18] dmaengine: bcm2835: make address increment platform independent
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v3 5/6] dt-bindings: iio: adc: Add AD4000
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: spi: amlogic,a1-spifc: add missing power-domains
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 05/18] dmaengine: bcm2835: move CB final extra info generation into function
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH 04/18] dmaengine: bcm2835: move CB info generation into separate function
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH 02/18] dmaengine: bcm2835: Support common dma-channel-mask
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH v3 6/6] iio: adc: Add support for AD4000
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 00/18] BCM2835 DMA mapping cleanups and fixes
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH 13/18] arm: dt: Add dma-ranges to the bcm283x platforms
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH 03/18] ARM: dts: bcm283x: Update to use dma-channel-mask
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- [PATCH AUTOSEL 6.1 12/14] spi: cadence: Ensure data lines set to low during dummy-cycle period
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 6.6 13/18] spi: cadence: Ensure data lines set to low during dummy-cycle period
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 6.8 13/18] spi: cadence: Ensure data lines set to low during dummy-cycle period
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 6.9 17/23] spi: cadence: Ensure data lines set to low during dummy-cycle period
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3 0/6] Add support for AD4000 series of ADCs
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- [PATCH v3 6/6] iio: adc: Add support for AD4000
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH] dt-bindings: spi: amlogic,a1-spifc: add missing power-domains
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v3 0/6] Add support for AD4000 series of ADCs
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v3 2/6] spi: bitbang: Implement support for MOSI idle state configuration
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v3 3/6] spi: spi-gpio: Add support for MOSI idle state configuration
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- omap2-mcspi multi mode
- From: Colin Foster <colin.foster@xxxxxxxxxxxxxxxx>
- [PATCH v3 5/6] dt-bindings: iio: adc: Add AD4000
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v3 3/6] spi: spi-gpio: Add support for MOSI idle state configuration
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v3 2/6] spi: bitbang: Implement support for MOSI idle state configuration
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v3 0/6] Add support for AD4000 series of ADCs
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH] spi: cs42l43: Correct SPI root clock speed
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH] spi: cs42l43: Correct SPI root clock speed
- From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH] spi: dt-bindings: marvell,mmp2-ssp: Merge PXA SSP into schema
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v7 4/4] spi: cadence: Add MRVL overlay xfer operation support
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v7 2/4] spi: cadence: Add Marvell xSPI IP overlay changes
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [RESEND v3] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v1 7/8] spi: qup: Use new spi_xfer_is_dma_mapped() helper
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v1 1/8] spi: Introduce internal spi_xfer_is_dma_mapped() helper
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v1 0/8] spi: Rework DMA mapped flag
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 0/8] spi: Rework DMA mapped flag
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 0/8] spi: Rework DMA mapped flag
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [PATCH v1 5/8] spi: pxa2xx: Use new spi_xfer_is_dma_mapped() helper
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH v1 0/2] spi: Make dummy SG handling robust
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v1 0/2] spi: Make dummy SG handling robust
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [RESEND v3] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
- From: Mark Brown <broonie@xxxxxxxxxx>
- [RESEND v3] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
- From: Kanak Shilledar <kanakshilledar@xxxxxxxxx>
- Re: [RESEND v3] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v1 0/2] spi: Make dummy SG handling robust
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v1 0/8] spi: Rework DMA mapped flag
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v1 2/8] spi: dw: Use new spi_xfer_is_dma_mapped() helper
- From: Serge Semin <fancer.lancer@xxxxxxxxx>
- Re: [PATCH v2] spidev: Introduce "linux,spidev-name" property for device tree of spidev.
- From: Szőke Benjamin <egyszeregy@xxxxxxxxxxx>
- Re: [GIT PULL] SPI fixes for v6.10-rc1
- From: pr-tracker-bot@xxxxxxxxxx
- Re: [PATCH v1 0/2] spi: Make dummy SG handling robust
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [PATCH v1 0/2] spi: Make dummy SG handling robust
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH v1 8/8] spi: Rework per message DMA mapped flag to be per transfer
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 6/8] spi: pci1xxxx: Use new spi_xfer_is_dma_mapped() helper
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 7/8] spi: qup: Use new spi_xfer_is_dma_mapped() helper
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 5/8] spi: pxa2xx: Use new spi_xfer_is_dma_mapped() helper
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 4/8] spi: omap2-mcspi: Use new spi_xfer_is_dma_mapped() helper
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 3/8] spi: ingenic: Use new spi_xfer_is_dma_mapped() helper
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 2/8] spi: dw: Use new spi_xfer_is_dma_mapped() helper
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 1/8] spi: Introduce internal spi_xfer_is_dma_mapped() helper
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 0/8] spi: Rework DMA mapped flag
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 0/2] spi: Make dummy SG handling robust
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- [GIT PULL] SPI fixes for v6.10-rc1
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v1 0/2] spi: Make dummy SG handling robust
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v1 0/2] spi: Make dummy SG handling robust
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v1 0/2] spi: Make dummy SG handling robust
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [PATCH 1/4] spi: dw: differentiate between unsupported and invalid requests
- From: Serge Semin <fancer.lancer@xxxxxxxxx>
- Re: [PATCH v1 1/2] spi: Revert "Check if transfer is mapped before calling DMA sync APIs"
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Mark Brown <broonie@xxxxxxxxxx>
- [RESEND v3] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
- From: Kanak Shilledar <kanakshilledar@xxxxxxxxx>
- Re: [PATCH v1 1/2] spi: Revert "Check if transfer is mapped before calling DMA sync APIs"
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v1 1/2] spi: Revert "Check if transfer is mapped before calling DMA sync APIs"
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH v1 2/2] spi: Do not rely on the SG table and respective API implementations
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH v1 0/2] spi: Make dummy SG handling robust
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v7 1/4] spi: dt-bindings: cadence: Add Marvell overlay bindings documentation for Cadence XSPI
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v7 1/4] spi: dt-bindings: cadence: Add Marvell overlay bindings documentation for Cadence XSPI
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v7 2/4] spi: cadence: Add Marvell xSPI IP overlay changes
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- [PATCH v2 10/11] spi: pxa2xx: Move platform driver to a separate file
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 00/11] spi: pxa2xx: Get rid of an additional layer in PCI driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 11/11] spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 07/11] spi: pxa2xx: Remove duplicate check
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 09/11] spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 06/11] spi: pxa2xx: Print DMA burst size only when DMA is enabled
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 08/11] spi: pxa2xx: Remove superflous check for Intel Atom SoCs
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 05/11] spi: pxa2xx: Utilise temporary variable for struct device
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 02/11] spi: pxa2xx: Reorganize the SSP type retrieval
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 04/11] spi: pxa2xx: Remove hard coded number of chip select pins
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 03/11] spi: pxa2xx: Remove no more needed driver data
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 01/11] spi: pxa2xx: Wrap pxa_ssp_request() to be device managed resource
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] spi: dt-bindings: fsl-dspi: Convert to yaml format
- From: Vladimir Oltean <olteanv@xxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH] spi: stm32: Don't warn about spurious interrupts
- From: Mark Brown <broonie@xxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- [PATCH v7 3/4] spi: cadence: Allow to read basic xSPI configuration from ACPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v7 2/4] spi: cadence: Add Marvell xSPI IP overlay changes
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v7 4/4] spi: cadence: Add MRVL overlay xfer operation support
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v7 1/4] spi: dt-bindings: cadence: Add Marvell overlay bindings documentation for Cadence XSPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v7 0/4] Marvell HW overlay support for Cadence xSPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- Re: [PATCH 1/1] spi: dt-bindings: fsl-dspi: Convert to yaml format
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 1/1] spi: dt-bindings: fsl-dspi: Convert to yaml format
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH] spi: Assign dummy scatterlist to unidirectional transfers
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH 1/1] spi: dt-bindings: fsl-dspi: Convert to yaml format
- From: Frank Li <Frank.Li@xxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH] spi: Assign dummy scatterlist to unidirectional transfers
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH] spi: Assign dummy scatterlist to unidirectional transfers
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: (subset) [PATCH v6 0/5] Marvell HW overlay support for Cadence xSPI
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v1 2/2] spi: Check if transfer is mapped before calling DMA sync APIs
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [PATCH v1 2/2] spi: Check if transfer is mapped before calling DMA sync APIs
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 2/2] spi: Check if transfer is mapped before calling DMA sync APIs
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [PATCH v6 2/5] spi: dt-bindings: cadence: Add Marvell overlay bindings documentation for Cadence XSPI
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- [PATCH v6 3/5] spi: cadence: Add Marvell xSPI IP overlay changes
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v6 5/5] spi: cadence: Add MRVL overlay xfer operation support
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v6 4/5] spi: cadence: Allow to read basic xSPI configuration from ACPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v6 1/5] spi: cadence: Ensure data lines set to low during dummy-cycle period
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v6 2/5] spi: dt-bindings: cadence: Add Marvell overlay bindings documentation for Cadence XSPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v6 0/5] Marvell HW overlay support for Cadence xSPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- RE: [EXTERNAL] Re: [PATCH v5 2/5] spi: dt-bindings: cadence: Add Marvell overlay bindings documentation for Cadence XSPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- Re: [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema
- From: Ninad Palsule <ninad@xxxxxxxxxxxxx>
- Re: [PATCH v6 14/20] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH v6 16/20] ARM: dts: aspeed: Add IBM P11 Fuji BMC system
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH v6 12/20] dt-bindings: arm: aspeed: add IBM P11 BMC boards
- From: Ninad Palsule <ninad@xxxxxxxxxxxxx>
- Re: [PATCH v5 2/5] spi: dt-bindings: cadence: Add Marvell overlay bindings documentation for Cadence XSPI
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 01/18] dma-direct: take dma-ranges/offsets into account in resource mapping
- From: Christoph Hellwig <hch@xxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- [PATCH v5 5/5] spi: cadence: Add MRVL overlay xfer operation support
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v5 4/5] spi: cadence: Allow to read basic xSPI configuration from ACPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v5 3/5] spi: cadence: Add Marvell xSPI IP overlay changes
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v5 2/5] spi: dt-bindings: cadence: Add Marvell overlay bindings documentation for Cadence XSPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v5 1/5] spi: cadence: Ensure data lines set to low during dummy-cycle period
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v5 0/5] Marvell HW overlay support for Cadence xSPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v5 0/5] Marvell HW overlay support for Cadence xSPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- RE: [EXTERNAL] Re: [PATCH v4 2/5] dt-bindings: spi: cadence: Add MRVL overlay bindings documentation for Cadence XSPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- RE: [EXTERNAL] Re: [PATCH v4 2/5] dt-bindings: spi: cadence: Add MRVL overlay bindings documentation for Cadence XSPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- RE: [EXTERNAL] Re: [PATCH v4 3/5] spi: cadence: Add Marvell xSPI IP overlay changes
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- RE: [EXTERNAL] Re: [PATCH v4 5/5] spi: cadence: Add MRVL overlay xfer operation support
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v6 15/20] ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC system
- From: Ninad Palsule <ninad@xxxxxxxxxxxxx>
- [PATCH 18/18] dmaengine: bcm2835: Revert the workaround for DMA addresses
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 13/18] arm: dt: Add dma-ranges to the bcm283x platforms
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 17/18] ASoC: bcm2835-i2s: Use phys addresses for DAI DMA
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 14/18] mmc: bcm2835: Use phys addresses for slave DMA config
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 16/18] drm/vc4: Use phys addresses for slave DMA config
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 12/18] dmaengine: bcm2835: Read ranges if dma-ranges aren't mapped
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 15/18] spi: bcm2835: Use phys addresses for slave DMA config
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 09/18] dmaengine: bcm2835: Add function to handle DMA mapping
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 11/18] dmaengine: bcm2835: Use dma_map_resource to map addresses
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 10/18] dmaengine: bcm2835: Add backwards compatible handling until clients updated
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 08/18] dmaengine: bcm2835: pass dma_chan to generic functions
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 06/18] dmaengine: bcm2835: make address increment platform independent
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 07/18] dmaengine: bcm2385: drop info parameters
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 05/18] dmaengine: bcm2835: move CB final extra info generation into function
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 04/18] dmaengine: bcm2835: move CB info generation into separate function
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 02/18] dmaengine: bcm2835: Support common dma-channel-mask
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 03/18] ARM: dts: bcm283x: Update to use dma-channel-mask
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 01/18] dma-direct: take dma-ranges/offsets into account in resource mapping
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 00/18] BCM2835 DMA mapping cleanups and fixes
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- [PATCH] spi: meson-spicc: set SPI clock flag CLK_SET_RATE_PARENT
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Ninad Palsule <ninad@xxxxxxxxxxxxx>
- Re: [PATCH v6 18/20] fsi: occ: Get device number from FSI minor number API
- From: Ninad Palsule <ninad@xxxxxxxxxxxxx>
- Re: [PATCH v6 19/20] fsi: occ: Find next available child rather than node name match
- From: Ninad Palsule <ninad@xxxxxxxxxxxxx>
- Re: [PATCH v6 20/20] fsi: scom: Update compatible string to match documentation
- From: Ninad Palsule <ninad@xxxxxxxxxxxxx>
- Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
- Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH] spi: stm32: Revert change that enabled controller before asserting CS
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v1 0/2] soi: Don't call DMA sync API when not needed
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v6 05/20] dt-bindings: fsi: Document the IBM SBEFIFO engine
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [PATCH v6 04/20] dt-bindings: fsi: p9-occ: Convert to json-schema
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v1 2/2] spi: Check if transfer is mapped before calling DMA sync APIs
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- [PATCH] spi: stm32: Revert change that enabled controller before asserting CS
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine
- From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
- Re: [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v6 06/20] dt-bindings: fsi: Document the FSI controller common properties
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v6 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v6 16/20] ARM: dts: aspeed: Add IBM P11 Fuji BMC system
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 13/20] ARM: dts: aspeed: Add IBM P11 FSI devices
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 06/20] dt-bindings: fsi: Document the FSI controller common properties
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 14/20] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 15/20] ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC system
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 20/20] fsi: scom: Update compatible string to match documentation
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 12/20] dt-bindings: arm: aspeed: add IBM P11 BMC boards
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 05/20] dt-bindings: fsi: Document the IBM SBEFIFO engine
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 09/20] dt-bindings: fsi: Document the AST2700 FSI controller
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 07/20] dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 08/20] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 02/20] dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 18/20] fsi: occ: Get device number from FSI minor number API
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 19/20] fsi: occ: Find next available child rather than node name match
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 10/20] dt-bindings: fsi: Document the FSI Hub Controller
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 04/20] dt-bindings: fsi: p9-occ: Convert to json-schema
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v6 01/20] spi: dt-bindings: Document the IBM FSI-attached SPI controller
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH v1 2/2] spi: Check if transfer is mapped before calling DMA sync APIs
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH v1 1/2] spi: Don't mark message DMA mapped when no transfer in it is
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 2/2] spi: Check if transfer is mapped before calling DMA sync APIs
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 0/2] soi: Don't call DMA sync API when not needed
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH] spi: dt-bindings: marvell,mmp2-ssp: Merge PXA SSP into schema
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- [PATCH 3/4] spi: rpc-if: differentiate between unsupported and invalid requests
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- [PATCH 4/4] spi: wpcm-fiu: differentiate between unsupported and invalid requests
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- [PATCH 2/4] spi: mxic: differentiate between unsupported and invalid requests
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- [PATCH 0/4] spi: differentiate between unsupported and invalid requests
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- [PATCH 1/4] spi: dw: differentiate between unsupported and invalid requests
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH] spi: dt-bindings: marvell,mmp2-ssp: Merge PXA SSP into schema
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH] spi: dt-bindings: marvell,mmp2-ssp: Merge PXA SSP into schema
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v6 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH RFC v2 6/8] spi: axi-spi-engine: add offload support
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v6 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- Re: [PATCH v6 5/8] drivers: mtd: nand: use FIELD_PREP and GENMASK
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- Re: [PATCH v6 4/8] drivers: mtd: nand: Add qpic_common API file
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH RFC v2 6/8] spi: axi-spi-engine: add offload support
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: pxa2xx: Move PXA SSP bindings to the correct folder
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v6 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH v6 5/8] drivers: mtd: nand: use FIELD_PREP and GENMASK
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH v6 4/8] drivers: mtd: nand: Add qpic_common API file
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH v6 4/8] drivers: mtd: nand: Add qpic_common API file
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- Re: [PATCH RFC v2 6/8] spi: axi-spi-engine: add offload support
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH v6 4/8] drivers: mtd: nand: Add qpic_common API file
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH RFC v2 2/8] spi: add basic support for SPI offloading
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- [PATCH v6 4/8] drivers: mtd: nand: Add qpic_common API file
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v6 2/8] mtd: rawnand: qcom: cleanup qcom_nandc driver
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v6 3/8] mtd: rawnand: qcom: Add qcom prefix to common api
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v6 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v6 7/8] arm64: dts: qcom: ipq9574: Add SPI nand support
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v6 8/8] arm64: dts: qcom: ipq9574: Disable eMMC node
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v6 5/8] drivers: mtd: nand: use FIELD_PREP and GENMASK
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v6 1/8] spi: dt-bindings: Introduce qcom,spi-qpic-snand
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v6 0/8] Add QPIC SPI NAND driver
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH] spi: stm32: Don't warn about spurious interrupts
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v4 5/5] spi: cadence: Add MRVL overlay xfer operation support
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v4 3/5] spi: cadence: Add Marvell xSPI IP overlay changes
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v4 2/5] dt-bindings: spi: cadence: Add MRVL overlay bindings documentation for Cadence XSPI
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: pxa2xx: Move PXA SSP bindings to the correct folder
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2] spidev: Introduce "linux,spidev-name" property for device tree of spidev.
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2] spidev: Introduce "linux,spidev-name" property for device tree of spidev.
- From: Szőke Benjamin <egyszeregy@xxxxxxxxxxx>
- [PATCH] spi: imx: remove empty cleanup function
- From: Martin Kaiser <martin@xxxxxxxxx>
- Re: [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- Re: [PATCH v2] spidev: Introduce "linux,spidev-name" property for device tree of spidev.
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: pxa2xx: Move PXA SSP bindings to the correct folder
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 7/7] arm64: dts: qcom: ipq9574: Disable eMMC node
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- Re: [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- Re: [PATCH v5 4/7] drivers: mtd: nand: Add qpic_common API file
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- Re: [PATCH v1 3/3] spi: gpio: Make num_chipselect 8-bit in the struct spi_gpio_platform_data
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- [PATCH v2] spidev: Introduce "linux,spidev-name" property for device tree of spidev.
- From: egyszeregy@xxxxxxxxxxx
- Re: [PATCH] spidev: Introduce "linux,spidev-name" property for device tree of spidev.
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH] spidev: Introduce "linux,spidev-name" property for device tree of spidev.
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH] spidev: Introduce "linux,spidev-name" property for device tree of spidev.
- From: egyszeregy@xxxxxxxxxxx
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- From Financial Crimes Enforcement Network
- From: "Financial Crimes Enforcement Network" <bill@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 37/40] fsi: core: Add different types of CFAM
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v1 3/3] spi: gpio: Make num_chipselect 8-bit in the struct spi_gpio_platform_data
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3 23/40] fsi: core: Add interrupt support
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v1 09/10] spi: pxa2xx: Move platform driver to a separate file
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: pxa2xx: Move PXA SSP bindings to the correct folder
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: pxa2xx: Move PXA SSP bindings to the correct folder
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 10/10] spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 07/10] spi: pxa2xx: Remove superflous check for Intel Atom SoCs
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 09/10] spi: pxa2xx: Move platform driver to a separate file
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 08/10] spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 05/10] spi: pxa2xx: Print DMA burst size only when DMA is enabled
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 06/10] spi: pxa2xx: Remove duplicate check
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 04/10] spi: pxa2xx: Utilise temporary variable for struct device
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 03/10] spi: pxa2xx: Remove hard coded number of chip select pins
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 02/10] spi: pxa2xx: Remove no more needed driver data
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 00/10] spi: pxa2xx: Get rid of an additional layer in PCI driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 01/10] spi: pxa2xx: Reorganize the SSP type retrieval
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- rv1108: SPI DMA failure
- From: Fabio Estevam <festevam@xxxxxxxxx>
- [PATCH v1 2/3] spi: gpio: Use traditional pattern when checking error codes
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 1/3] spi: gpio: Make use of device properties
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 3/3] spi: gpio: Make num_chipselect 8-bit in the struct spi_gpio_platform_data
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 0/3] spi: gpio: Convert to be used outside of OF
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 1/3] spi: bitbang: Use typedef for txrx_*() callbacks
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 0/3] spi: bitbang: Clean up the driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 2/3] spi: bitbang: Convert unsigned to unsigned int
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 3/3] spi: bitbang: Replace hard coded number of SPI modes
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: pxa2xx: Move PXA SSP bindings to the correct folder
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v1 1/1] spi: pxa2xx: Move PXA SSP bindings to the correct folder
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v3 37/40] fsi: core: Add different types of CFAM
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 37/40] fsi: core: Add different types of CFAM
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [PATCH v3 38/40] spi: fsi: Calculate clock divider from local bus frequency
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v3 27/40] i2c: fsi: Improve formatting
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 17/40] fsi: aspeed: Refactor trace functions
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 15/40] fsi: aspeed: Use common initialization and link enable
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 25/40] fsi: hub: Add interrupt support
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 40/40] ARM: dts: aspeed: P10: Bump SPI max frequencies
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 33/40] fsi: hub master: Reset hub master after errors
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 20/40] fsi: aspeed: Switch to spinlock
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 22/40] fsi: aspeed: Use common master error handler
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 36/40] fsi: i2cr: Adjust virtual CFAM ID to match Odyssey chip
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 12/40] fsi: core: Add common regmap master functions
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 16/40] fsi: aspeed: Remove cfam reset sysfs file in error path and remove
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 24/40] fsi: aspeed: Add interrupt support
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 35/40] fsi: core: Add slave register read-only sysfs
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 14/40] fsi: hub: Use common initialization and link enable
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 30/40] i2c: fsi: Define a function to check status error bits
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 32/40] i2c: fsi: Add interrupt support
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 39/40] ARM: dts: aspeed: P10 and tacoma: Set FSI clock frequency
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 37/40] fsi: core: Add different types of CFAM
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 28/40] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 34/40] fsi: core: Add master register read-only sysfs
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 21/40] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 38/40] spi: fsi: Calculate clock divider from local bus frequency
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 07/40] fsi: core: Add slave error trace
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 03/40] fsi: Fix slave addressing after break command
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 11/40] fsi: core: Allow cfam device type aliases
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 19/40] fsi: aspeed: Only read result register for successful read
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 13/40] fsi: core: Disable relative addressing during scan
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 23/40] fsi: core: Add interrupt support
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 26/40] i2c: fsi: Calculate clock divider from local bus frequency
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 10/40] fsi: core: Add slave spinlock
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 05/40] fsi: Calculate local bus clock frequency
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 31/40] i2c: fsi: Add boolean for skip stop command on abort
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 29/40] i2c: fsi: Remove list structure of ports
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 18/40] fsi: aspeed: Don't clear all IRQs during OPB transfers
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 01/40] fsi: hub: Set master index to link number plus one
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 06/40] fsi: core: Improve master read/write/error traces
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 08/40] fsi: core: Reset errors instead of clearing interrupts
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 00/40] fsi: Add interrupt support
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 04/40] fsi: Use a defined value for default echo delay
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 02/40] fsi: Move slave definitions to fsi-slave.h
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v3 09/40] fsi: aspeed: Add AST2700 support
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 7/7] arm64: dts: qcom: ipq9574: Disable eMMC node
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH v5 4/7] drivers: mtd: nand: Add qpic_common API file
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH] spi: Remove unneeded check for orig_nents
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v3] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
- From: Kanak Shilledar <kanakshilledar@xxxxxxxxx>
- Re: [PATCH v3] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
- From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
- Re: [PATCH v3] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
- From: Kanak Shilledar <kanakshilledar@xxxxxxxxx>
- Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [PATCH] spi: imx: Don't expect DMA for i.MX{25, 35, 50, 51, 53} cspi devices
- From: Martin Kaiser <martin@xxxxxxxxx>
- [PATCH] spi: atmel-quadspi: Add missing check for clk_prepare
- From: Chen Ni <nichen@xxxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [GIT PULL] SPI updates for v6.10
- From: pr-tracker-bot@xxxxxxxxxx
- [PATCH v5] spi: dt-bindings: Document the IBM FSI-attached SPI controller
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 3/3] spi: spi-microchip-core: Add support for GPIO based CS
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 2/3] spi: spi-microchip-core: Fix the number of chip selects supported
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 1/3] spi: dt-bindings: Add num-cs property for mpfs-spi
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v4 08/17] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- [PATCH v2 1/3] spi: dt-bindings: Add num-cs property for mpfs-spi
- From: Prajna Rajendra Kumar <prajna.rajendrakumar@xxxxxxxxxxxxx>
- [PATCH v2 2/3] spi: spi-microchip-core: Fix the number of chip selects supported
- From: Prajna Rajendra Kumar <prajna.rajendrakumar@xxxxxxxxxxxxx>
- [PATCH v2 3/3] spi: spi-microchip-core: Add support for GPIO based CS
- From: Prajna Rajendra Kumar <prajna.rajendrakumar@xxxxxxxxxxxxx>
- [PATCH v2 0/3] Add support for GPIO based CS
- From: Prajna Rajendra Kumar <prajna.rajendrakumar@xxxxxxxxxxxxx>
- Re: [PATCH v2] spi: stm32: enable controller before asserting CS
- From: Mark Brown <broonie@xxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- [PATCH v3] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
- From: Kanak Shilledar <kanakshilledar@xxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2] spi: stm32: enable controller before asserting CS
- From: Ben Wolsieffer <ben.wolsieffer@xxxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH RFC v2 8/8] iio: adc: ad7944: add support for SPI offload
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [GIT PULL] SPI updates for v6.10
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2] spi: stm32: enable controller before asserting CS
- From: Leonard Göhrs <l.goehrs@xxxxxxxxxxxxxx>
- Re: [PATCH] spi: imx: Don't expect DMA for i.MX{25, 35, 50, 51, 53} cspi devices
- From: Martin Kaiser <martin@xxxxxxxxx>
- Re: [PATCH RFC v2 8/8] iio: adc: ad7944: add support for SPI offload
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH RFC v2 8/8] iio: adc: ad7944: add support for SPI offload
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH RFC v2 8/8] iio: adc: ad7944: add support for SPI offload
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH RFC v2 3/8] spi: add support for hardware triggered offload
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- [PATCH v2] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
- From: Kanak Shilledar <kanakshilledar@xxxxxxxxx>
- [PATCH RFC v2 8/8] iio: adc: ad7944: add support for SPI offload
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH RFC v2 6/8] spi: axi-spi-engine: add offload support
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH RFC v2 7/8] dt-bindings: iio: adc: adi,ad7944: add SPI offload properties
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH RFC v2 4/8] spi: add offload xfer flags
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH RFC v2 5/8] spi: dt-bindings: axi-spi-engine: document spi-offloads
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH RFC v2 3/8] spi: add support for hardware triggered offload
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH RFC v2 2/8] spi: add basic support for SPI offloading
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH RFC v2 0/8] spi: axi-spi-engine: add offload support
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- [PATCH v1 1/1] spi: Replace custom code with device_match_acpi_handle()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 1/1] spi: Refactor spi_stop_queue()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- spi: Inquiry Regarding Linux Kernel SPI Subsystem device drivers
- From: Subhashini Rao Beerisetty <subhashbeerisetty@xxxxxxxxx>
- Re: [GIT PULL] SPI fixes for v6.9-rc7
- From: pr-tracker-bot@xxxxxxxxxx
- Re: [PATCH] spi: imx: Don't expect DMA for i.MX{25, 35, 50, 51, 53} cspi devices
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] spi: imx: Don't expect DMA for i.MX{25, 35, 50, 51, 53} cspi devices
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [GIT PULL] SPI fixes for v6.9-rc7
- From: Mark Brown <broonie@xxxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH] spi: dw: Bail out early on unsupported target mode
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v4 2/5] dt-bindings: spi: cadence: Add MRVL overlay bindings documentation for Cadence XSPI
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
- From: Kanak Shilledar <kanakshilledar@xxxxxxxxx>
- Re: [PATCH] spi: dw: Bail out early on unsupported target mode
- From: Damien Le Moal <dlemoal@xxxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH v1] spi: microchip-core-qspi: fix setting spi bus clock rate
- From: Mark Brown <broonie@xxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- RE: [EXTERNAL] Re: [PATCH v3 4/5] spi: cadence: Allow to read basic xSPI configuration from ACPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v4 5/5] spi: cadence: Add MRVL overlay xfer operation support
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v4 3/5] spi: cadence: Add Marvell xSPI IP overlay changes
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v4 4/5] spi: cadence: Allow to read basic xSPI configuration from ACPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v4 2/5] dt-bindings: spi: cadence: Add MRVL overlay bindings documentation for Cadence XSPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v4 1/5] spi: cadence: Ensure data lines set to low during dummy-cycle period
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v4 0/5] Marvell HW overlay support for Cadence xSPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- Re: [PATCH v1] spi: microchip-core-qspi: fix setting spi bus clock rate
- From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
- [PATCH] spi: axi-spi-engine: Add SPI_CS_HIGH support
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v1] spi: microchip-core-qspi: fix setting spi bus clock rate
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH] spi: imx: Don't expect DMA for i.MX{25,35,50,51,53} cspi devices
- From: Martin Kaiser <martin@xxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH v1 1/1] spi: Remove unneded check for orig_nents
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v3 4/5] spi: cadence: Allow to read basic xSPI configuration from ACPI
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH] spi: dw: Bail out early on unsupported target mode
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- [PATCH] spi: imx: Don't expect DMA for i.MX{25,35,50,51,53} cspi devices
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- [PATCH v5 2/7] mtd: rawnand: qcom: cleanup qcom_nandc driver
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v5 4/7] drivers: mtd: nand: Add qpic_common API file
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v5 0/7] Add QPIC SPI NAND driver
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v5 7/7] arm64: dts: qcom: ipq9574: Disable eMMC node
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v5 3/7] mtd: rawnand: qcom: Add qcom prefix to common api
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v5 1/7] spi: dt-bindings: Introduce qcom,spi-qpic-snand
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v5 6/7] arm64: dts: qcom: ipq9574: Add SPI nand support
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- RE: [EXTERNAL] Re: [PATCH v3 4/5] spi: cadence: Allow to read basic xSPI configuration from ACPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- [PATCH v3 1/2] spi: spi-cadence: Add optional reset control support
- From: Ji Sheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
- [PATCH v3 0/2] Add optional reset control for Cadence SPI
- From: Ji Sheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
- [PATCH v3 2/2] dt-bindings: spi: spi-cadence: Add optional reset control
- From: Ji Sheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH] MAINTAINERS: repair file entry in AIROHA SPI SNFI DRIVER
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: pxa2xx: Drop the stale entry in documentation TOC
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v1 1/1] spi: Remove unneded check for orig_nents
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 REBASED] spi: Add capability to perform some transfer with chipselect off
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
- Re: [PATCH] MAINTAINERS: repair file entry in AIROHA SPI SNFI DRIVER
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- [PATCH] MAINTAINERS: repair file entry in AIROHA SPI SNFI DRIVER
- From: Lukas Bulwahn <lbulwahn@xxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: pxa2xx: Drop the stale entry in documentation TOC
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 1/1] spi: pxa2xx: Drop the stale entry in documentation TOC
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] spi: dt-bindings: Add num-cs property for mpfs-spi
- From: <Prajna.Rajendrakumar@xxxxxxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH v3 0/9] spi: pxa2xx: Drop linux/spi/pxa2xx_spi.h
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH RESEND v4 0/4] spi: dw: Auto-detect number of native CS
- From: Mark Brown <broonie@xxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH v2] spi: omap2-mcspi: Ensure that CS is correctly asserted when switching from MULTI mode to SINGLE mode
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- [PATCH v2] spi: omap2-mcspi: Ensure that CS is correctly asserted when switching from MULTI mode to SINGLE mode
- From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH v2 1/1] spi: bitbang: Add missing MODULE_DESCRIPTION()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: bitbang: Add missing MODULE_DESCRIPTION()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: bitbang: Use NSEC_PER_*SEC rather than hard coding
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3] spi: dt-bindings: ti,qspi: convert to dtschema
- From: Mark Brown <broonie@xxxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH v2] spi: stm32: enable controller before asserting CS
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v4 08/17] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 04/17] dt-bindings: fsi: p9-occ: Convert to json-schema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] spi: airoha: initialize as_ctrl at pointer declaration
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- [PATCH v2 1/1] spi: bitbang: Add missing MODULE_DESCRIPTION()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH] spi: airoha: initialize as_ctrl at pointer declaration
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- Re: [GIT PULL] SPI fixes for v6.9-rc6
- From: pr-tracker-bot@xxxxxxxxxx
- Re: [PATCH 2/3] spi: dt-bindings: Add num-cs property for mpfs-spi
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v1 1/1] spi: bitbang: Add missing MODULE_DESCRIPTION()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] spi: dt-bindings: Add num-cs property for mpfs-spi
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v6 3/3] spi: airoha: Add spi-nand flash controller driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v6 3/3] spi: airoha: Add spi-nand flash controller driver
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- Re: [PATCH v6 3/3] spi: airoha: Add spi-nand flash controller driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 2/3] spi: dt-bindings: Add num-cs property for mpfs-spi
- From: <Prajna.Rajendrakumar@xxxxxxxxxxxxx>
- Re: [PATCH v6 3/3] spi: airoha: Add spi-nand flash controller driver
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- Re: [PATCH 2/3] spi: dt-bindings: Add num-cs property for mpfs-spi
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 1/3] spi: spi-microchip-core: Add support for GPIO based CS
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 1/3] spi: spi-microchip-core: Add support for GPIO based CS
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v6 3/3] spi: airoha: Add spi-nand flash controller driver
- From: Mark Brown <broonie@xxxxxxxxxx>
- [GIT PULL] SPI fixes for v6.9-rc6
- From: Mark Brown <broonie@xxxxxxxxxx>
- RE: [PATCH v2 1/2] spi: spi-cadence: Add optional reset control support
- From: JiSheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
- [PATCH v1 1/1] spi: bitbang: Add missing MODULE_DESCRIPTION()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] spi: spi-microchip-core: Add support for GPIO based CS
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH v1 1/1] spi: bitbang: Use NSEC_PER_*SEC rather than hard coding
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] spi: spi-microchip-core: Fix the number of chip selects supported
- From: Conor Dooley <conor@xxxxxxxxxx>
- RE: [PATCH v2 2/2] dt-bindings: spi: spi-cadence: Add optional reset control
- From: JiSheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] spi: dt-bindings: Add num-cs property for mpfs-spi
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 2/3] spi: dt-bindings: Add num-cs property for mpfs-spi
- From: Prajna Rajendra Kumar <prajna.rajendrakumar@xxxxxxxxxxxxx>
- [PATCH 0/3] Add support for GPIO based CS
- From: Prajna Rajendra Kumar <prajna.rajendrakumar@xxxxxxxxxxxxx>
- [PATCH 3/3] spi: spi-microchip-core: Fix the number of chip selects supported
- From: Prajna Rajendra Kumar <prajna.rajendrakumar@xxxxxxxxxxxxx>
- [PATCH 1/3] spi: spi-microchip-core: Add support for GPIO based CS
- From: Prajna Rajendra Kumar <prajna.rajendrakumar@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] spi: spi-cadence: Add optional reset control support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH v2 2/2] dt-bindings: spi: spi-cadence: Add optional reset control
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v2 1/2] spi: spi-cadence: Add optional reset control support
- From: Ji Sheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
- RE: [PATCH v2 2/2] dt-bindings: spi: spi-cadence: Add optional reset control
- From: JiSheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 10/17] dt-bindings: i2c: i2c-fsi: Convert to json-schema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 2/2] dt-bindings: spi: spi-cadence: Add optional reset control
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 2/2] dt-bindings: spi: spi-cadence: Add optional reset control
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v2 0/2] Add optional reset control for Cadence SPI
- From: Ji Sheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
- [PATCH v2 2/2] dt-bindings: spi: spi-cadence: Add optional reset control
- From: Ji Sheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] ARM: spitz: Use software nodes for the ADS7846 touchscreen
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 9/9] spi: pxa2xx: Don't provide struct chip_data for others
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 8/9] spi: pxa2xx: Remove timeout field from struct chip_data
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 7/9] spi: pxa2xx: Remove DMA parameters from struct chip_data
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 6/9] spi: pxa2xx: Drop struct pxa2xx_spi_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 5/9] spi: pxa2xx: Don't use "proxy" headers
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 4/9] spi: pxa2xx: Remove outdated documentation
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 3/9] spi: pxa2xx: Move contents of linux/spi/pxa2xx_spi.h to a local one
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 2/9] spi: pxa2xx: Provide num-cs for Sharp PDAs via device properties
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 1/9] spi: pxa2xx: Allow number of chip select pins to be read from property
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3] spi: dt-bindings: ti,qspi: convert to dtschema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH v2 0/8] spi: use 'time_left' instead of 'timeout' with wait_for_*() functions
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: (subset) [PATCH v5 0/3] Add add SPI-NAND Flash controller driver for EN7581
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 0/8] spi: use 'time_left' instead of 'timeout' with wait_for_*() functions
- From: Mark Brown <broonie@xxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- [PATCH v3] spi: dt-bindings: ti,qspi: convert to dtschema
- From: Kousik Sanagavarapu <five231003@xxxxxxxxx>
- Re: [PATCH v4 10/17] dt-bindings: i2c: i2c-fsi: Convert to json-schema
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH v4 08/17] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH v4 06/17] dt-bindings: fsi: Document the FSI controller common properties
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH v4 05/17] dt-bindings: fsi: Document the IBM SBEFIFO engine
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH v4 04/17] dt-bindings: fsi: p9-occ: Convert to json-schema
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH v3 0/9] spi: pxa2xx: Drop linux/spi/pxa2xx_spi.h
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v6 3/3] spi: airoha: Add spi-nand flash controller driver
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- [PATCH v6 2/3] arm64: dts: airoha: en7581: Add spi-nand node
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- [PATCH v6 1/3] spi: dt-bindings: Add binding doc for spi-airoha-snfi
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- [PATCH v6 0/3] Add add spi-nand flash controller driver for EN7581
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH] spi: use spi_valid_{tx,rx}buf() in stats function
- From: Mark Brown <broonie@xxxxxxxxxx>
- Patchwork summary for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [PATCH] spi: fix null pointer dereference within spi_sync
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] spi: fix null pointer dereference within spi_sync
- From: David Jander <david@xxxxxxxxxxx>
- [PATCH] spi: use spi_valid_{tx,rx}buf() in stats function
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH] spi: fix null pointer dereference within spi_sync
- From: Mans Rullgard <mans@xxxxxxxxx>
- Re: [PATCH 2/3] dt-bindings: ads7846: Add hsync-gpios
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v1 1/2] dt-bindings: mtd: add sophgo spi-nor-controller
- From: Jingbao Qiu <qiujingbao.dlmu@xxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- [PATCH v2 8/8] spi: xlp: use 'time_left' variable with wait_for_completion_timeout()
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 5/8] spi: pic32: use 'time_left' variable with wait_for_completion_timeout()
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 7/8] spi: sun6i: use 'time_left' variable with wait_for_completion_timeout()
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/8] spi: armada-3700: use 'time_left' variable with wait_for_completion_timeout()
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 3/8] spi: imx: use 'time_left' variable with wait_for_completion_timeout()
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 6/8] spi: sun4i: use 'time_left' variable with wait_for_completion_timeout()
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 0/8] spi: use 'time_left' instead of 'timeout' with wait_for_*() functions
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 4/8] spi: pic32-sqi: use 'time_left' variable with wait_for_completion_timeout()
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 2/8] spi: fsl-lpspi: use 'time_left' variable with wait_for_completion_timeout()
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/2] dt-bindings: mtd: add sophgo spi-nor-controller
- From: "Michael Walle" <mwalle@xxxxxxxxxx>
- Re: [PATCH v1 2/2] spi: add support for sophgo spi-nor controller
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v3 4/5] spi: cadence: Allow to read basic xSPI configuration from ACPI
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v3 2/5] spi: cadence: Add MRVL overlay bindings documentation for Cadence XSPI
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH 2/5] spi: cadence: Add Marvell IP modification changes
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v4 17/17] fsi: scom: Update compatible string to match documentation
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 11/17] dt-bindings: arm: aspeed: add IBM P11 BMC boards
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 10/17] dt-bindings: i2c: i2c-fsi: Convert to json-schema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 09/17] dt-bindings: fsi: Document the FSI Hub Controller
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 08/17] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 3/3] ARM: spitz: Use software nodes for the ADS7846 touchscreen
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 2/3] dt-bindings: ads7846: Add hsync-gpios
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 1/3] ARM: spitz: Convert Spitz board to GPIO descriptors for LEDs
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 0/3] ARM: Modernize the PXA Spitz a bit
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v4 07/17] dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 06/17] dt-bindings: fsi: Document the FSI controller common properties
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 05/17] dt-bindings: fsi: Document the IBM SBEFIFO engine
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 04/17] dt-bindings: fsi: p9-occ: Convert to json-schema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 02/17] dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 01/17] spi: dt-bindings: Document the IBM FSI-attached SPI controller
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- RE: [PATCH 3/8] spi: imx: use 'time_left' variable with wait_for_completion_timeout()
- From: Peng Fan <peng.fan@xxxxxxx>
- RE: [EXTERNAL] Re: [PATCH v3 2/5] spi: cadence: Add MRVL overlay bindings documentation for Cadence XSPI
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- Patchwork housekeeping for: spi-devel-general
- From: patchwork-bot+spi-devel-general@xxxxxxxxxx
- Re: [EXTERNAL] Re: [PATCH v3 2/5] spi: cadence: Add MRVL overlay bindings documentation for Cadence XSPI
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH v4 16/17] fsi: occ: Find next available child rather than node name match
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 11/17] dt-bindings: arm: aspeed: add IBM P11 BMC boards
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 14/17] ARM: dts: aspeed: Add IBM P11 Fuji BMC system
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [PATCH v4 15/17] fsi: occ: Get device number from FSI minor number API
- From: Eddie James <eajames@xxxxxxxxxxxxx>
[Index of Archives]
[CentOS]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
[Kernel Announce]