Linux Serial
[Prev Page][Next Page]
- Re: [PATCH] serial: 8250_dw: Mark acpi match table as maybe unused, (continued)
- [PATCH v7 0/6] serial: mvebu-uart: Support for higher baudrates,
Pali Rohár
- [PATCHv2 0/4] Get rid of pm_runtime_irq_safe() for 8250_omap,
Tony Lindgren
- [PATCH] tty: n_gsm: Don't ignore write return value in gsmld_output(),
Tony Lindgren
- [PATCH v2] serial: imx: Fix sysrq deadlock,
Fabio Estevam
- [PATCH] serial: imx: Fix sysrq deadlock,
Fabio Estevam
- [tty:tty-testing] BUILD SUCCESS 5ecb11dd892f443d4900292edaba88a26efee8fe,
kernel test robot
- serial: imx: Possible circular locking dependency,
Fabio Estevam
- [PATCH v1 0/3] serial:8250:Add driver support for MCHP PCI1XXXX UART module,
LakshmiPraveen Kopparthi
- [PATCH v6 0/6] serial: mvebu-uart: Support for higher baudrates,
Pali Rohár
- [PATCH v2 00/11] arm64: dts: Add i.MX8DXL initial support,
Abel Vesa
- [PATCH v2 01/10] arm64: dts: freescale: Add the top level dtsi support for imx8dxl,
Abel Vesa
- [PATCH v2 03/10] arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl,
Abel Vesa
- [PATCH v2 02/10] arm64: dts: imx8-ss-lsio: Add mu5a mailbox,
Abel Vesa
- [PATCH v2 04/10] arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi,
Abel Vesa
- [PATCH v2 05/10] arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl,
Abel Vesa
- [PATCH v2 07/10] arm64: dts: imx8dxl: Add i.MX8DXL evk board support,
Abel Vesa
- [PATCH v2 06/10] arm64: dts: freescale: Add lsio subsys dtsi for imx8dxl,
Abel Vesa
- [PATCH v2 08/10] dt-bindings: fsl: scu: Add i.MX8DXL ocotp binding,
Abel Vesa
- [PATCH v2 09/10] dt-bindings: i2c: imx-lpi2c: Add i.MX8DXL compatible match,
Abel Vesa
- [PATCH v2 10/10] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible,
Abel Vesa
- Re: [PATCH v2 00/11] arm64: dts: Add i.MX8DXL initial support,
Rob Herring
- [PATCH 0/3] Add Unisoc's UMS512 support,
Chunyan Zhang
- [PATCH] serial: 8250: Fix reporting real baudrate value in c_ospeed field,
Pali Rohár
- [PATCH] serial: sifive: set pointer to NULL rather than 0.,
Colin King
- [GIT PULL] TTY/Serial driver fixes for 5.15-rc3,
Greg KH
- [PATCH] tty: serial: samsung: describe driver in KConfig,
Krzysztof Kozlowski
- [PATCH v2 1/2] serial: 8250: SERIAL_8250_FSL should not default to y when compile-testing,
Geert Uytterhoeven
- [RESEND PATCH v5 0/6] serial: mvebu-uart: Support for higher baudrates,
Pali Rohár
- [PATCH 1/7] mxser: restore baud rate if its setting fails,
Jiri Slaby
- [PATCH 0/6] Get rid of pm_runtime_irq_safe() for 8250_omap,
Tony Lindgren
- [PATCH] serial: 8250: remove duplicated BRI0A49 and BDP3336 entries,
Krzysztof Kozlowski
- [tty:tty-linus] BUILD SUCCESS 7049d853cfb928f50b6041cb4a5c6d6c1d8dd201,
kernel test robot
- [tty:tty-testing] BUILD SUCCESS b55c8aa6b1abfc0fb0beede48627ac4d13b5ddc7,
kernel test robot
- [PATCH] serial: 8250: SERIAL_8250_FSL should not default to y when compile-testing,
Geert Uytterhoeven
- [PATCH] serial: 8250_fsl: Move fsl8250_data to ACPI section,
Geert Uytterhoeven
- [PATCH] serial: 8250: SERIAL_8250_EM should depend on ARCH_RENESAS,
Geert Uytterhoeven
- [PATCH] tty: serial: samsung: Improve naming for common macro,
Sam Protsenko
- [PATCH 01/16] tty: unexport tty_ldisc_release,
Jiri Slaby
- [PATCH 02/16] tty: remove flags from struct tty_ldisc_ops,
Jiri Slaby
- [PATCH 03/16] tty: remove extern from functions in tty headers,
Jiri Slaby
- [PATCH 04/16] tty: make tty_ldisc_ops::hangup return void,
Jiri Slaby
- [PATCH 05/16] tty: remove file from tty_mode_ioctl,
Jiri Slaby
- [PATCH 06/16] tty: remove file from n_tty_ioctl_helper,
Jiri Slaby
- [PATCH 07/16] tty: remove file from tty_ldisc_ops::ioctl and compat_ioctl,
Jiri Slaby
- [PATCH 08/16] tty: drivers/tty/serial/, stop using tty_flip_buffer_push,
Jiri Slaby
- [PATCH 09/16] tty: drivers/tty/, stop using tty_flip_buffer_push,
Jiri Slaby
- [PATCH 11/16] tty: drivers/usb/, stop using tty_flip_buffer_push,
Jiri Slaby
- [PATCH 10/16] tty: drivers/usb/serial/, stop using tty_flip_buffer_push,
Jiri Slaby
- [PATCH 13/16] tty: drivers/s390/char/, stop using tty_flip_buffer_push,
Jiri Slaby
- [PATCH 12/16] tty: arch/, stop using tty_flip_buffer_push,
Jiri Slaby
- [PATCH 14/16] tty: drivers/staging/, stop using tty_flip_buffer_push,
Jiri Slaby
- [PATCH 15/16] tty: the rest, stop using tty_flip_buffer_push,
Jiri Slaby
- [PATCH 16/16] tty: drop tty_flip_buffer_push,
Jiri Slaby
- Re: [PATCH 08/16] tty: drivers/tty/serial/, stop using tty_flip_buffer_push,
Krzysztof Kozlowski
- Re: [PATCH 08/16] tty: drivers/tty/serial/, stop using tty_flip_buffer_push,
Uwe Kleine-König
- Re: [PATCH 08/16] tty: drivers/tty/serial/, stop using tty_flip_buffer_push,
Richard Genoud
- Re: [PATCH 08/16] tty: drivers/tty/serial/, stop using tty_flip_buffer_push,
Tobias Klauser
- Re: [PATCH 08/16] tty: drivers/tty/serial/, stop using tty_flip_buffer_push,
Andrew Jeffery
- Re: [PATCH 08/16] tty: drivers/tty/serial/, stop using tty_flip_buffer_push,
Nicolas Ferre
- Re: [PATCH 08/16] tty: drivers/tty/serial/, stop using tty_flip_buffer_push,
Chunyan Zhang
- Re: [PATCH 08/16] tty: drivers/tty/serial/, stop using tty_flip_buffer_push,
Neil Armstrong
- Re: [PATCH 08/16] tty: drivers/tty/serial/, stop using tty_flip_buffer_push,
Russell King (Oracle)
- Re: [PATCH 08/16] tty: drivers/tty/serial/, stop using tty_flip_buffer_push,
Andreas Färber
- Re: [PATCH 08/16] tty: drivers/tty/serial/, stop using tty_flip_buffer_push,
Vladimir Zapolskiy
- [PATCH] moxa: merge moxa.h into moxa.c,
Jiri Slaby
- [v3,0/9] Add basic SoC support for mediatek mt7986,
Sam Shih
- [v3,1/9] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC,
Sam Shih
- [v3,2/9] clk: mediatek: add mt7986 clock IDs,
Sam Shih
- [RESEND,v2,3/9] clk: mediatek: add mt7986 clock support,
Sam Shih
- [RESEND,v3,4/9] pinctrl: mediatek: moore: check if pin_desc is valid before use,
Sam Shih
- [v3,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC,
Sam Shih
- [v4,6/9] pinctrl: mediatek: add support for MT7986 SoC,
Sam Shih
- [RESEND,v2,7/9] dt-bindings: arm64: dts: mediatek: Add mt7986 series,
Sam Shih
- [RESEND,v2,8/9] arm64: dts: mediatek: add mt7986a support,
Sam Shih
- [RESEND,v2,9/9] arm64: dts: mediatek: add mt7986b support,
Sam Shih
- [RFC 00/19] Add interconnect and devfreq support for i.MX8MQ,
Abel Vesa
- [RFC 01/19] dt-bindings: interconnect: imx8mq: Add missing pl301 and SAI ids,
Abel Vesa
- [RFC 03/19] devfreq: imx-bus: Decouple imx-bus from icc made,
Abel Vesa
- [RFC 04/19] devfreq: imx8m-ddrc: Change governor to powersave,
Abel Vesa
- [RFC 10/19] interconnect: imx8mq: Add of_match_table,
Abel Vesa
- [RFC 11/19] interconnect: imx: Add imx_icc_get_bw and imx_icc_aggregate functions,
Abel Vesa
- [RFC 13/19] arm64: dts: imx8mq: Add fsl,icc-id to noc node,
Abel Vesa
- [RFC 09/19] interconnect: imx8mq: Add the pl301_per_m and pl301_wakeup nodes and subnodes,
Abel Vesa
- [RFC 07/19] interconnect: imx: Switch from imx_icc_node_adj_desc to fsl,icc-id node assignment,
Abel Vesa
- [RFC 14/19] arm64: dts: imx8mq: Add all pl301 nodes,
Abel Vesa
- [RFC 08/19] interconnect: imx8: Remove the imx_icc_node_adj_desc,
Abel Vesa
- [RFC 06/19] devfreq: imx8m-ddrc: Add late system sleep PM ops,
Abel Vesa
- [RFC 05/19] devfreq: imx8m-ddrc: Use the opps acquired from EL3,
Abel Vesa
- [RFC 12/19] arm64: dts: imx8mq: Add fsl,icc-id property to ddrc node,
Abel Vesa
- [RFC 18/19] mmc: sdhci-esdhc-imx: Add interconnect support,
Abel Vesa
- [RFC 19/19] arm64: defconfig: Add necessary configs for icc+devfreq on i.MX8MQ,
Abel Vesa
- [RFC 02/19] devfreq: imx-bus: Switch governor to powersave,
Abel Vesa
- [RFC 15/19] arm64: dts: imx8mq: Add the interconnect node,
Abel Vesa
- [RFC 16/19] arm64: dts: imx8mq: Add interconnect properties to icc consumer nodes,
Abel Vesa
- [RFC 17/19] net: ethernet: fec_main: Add interconnect support,
Abel Vesa
- Re: [RFC 00/19] Add interconnect and devfreq support for i.MX8MQ,
Martin Kepplinger
- [PATCH v4] lockdown,selinux: fix wrong subject in some SELinux lockdown checks,
Ondrej Mosnacek
- [PATCH 00/10] arm64: dts: Add i.MX8DXL initial support,
Abel Vesa
- [PATCH 01/10] arm64: dts: freescale: Add the top level dtsi support for imx8dxl,
Abel Vesa
- [PATCH 03/10] arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl,
Abel Vesa
- [PATCH 04/10] arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi,
Abel Vesa
- [PATCH 09/10] dt-bindings: i2c: imx-lpi2c: Add i.MX8DXL compatible match,
Abel Vesa
- [PATCH 10/10] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible,
Abel Vesa
- [PATCH 08/10] dt-bindings: fsl: scu: add i.MX8DXL ocotp binding,
Abel Vesa
- [PATCH 07/10] arm64: dts: imx8dxl: Add i.MX8DXL evk board support,
Abel Vesa
- [PATCH 06/10] arm64: dts: freescale: Add lsio subsys dtsi for imx8dxl,
Abel Vesa
- [PATCH 02/10] arm64: dts: imx8-ss-lsio: Add mu5a mailbox,
Abel Vesa
- [PATCH 05/10] arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl,
Abel Vesa
- [PATCH] serial: mvebu-uart: fix driver's tx_empty callback,
Pali Rohár
- [PATCH AUTOSEL 4.19 28/74] serial: 8250_pci: make setup_port() parameters explicitly unsigned,
Sasha Levin
- [PATCH AUTOSEL 4.19 25/74] serial: 8250: Define RX trigger levels for OxSemi 950 devices,
Sasha Levin
- [PATCH AUTOSEL 4.19 50/74] serial: sh-sci: fix break handling for sysrq,
Sasha Levin
- [PATCH AUTOSEL 4.9 12/48] tty: serial: jsm: hold port lock when reporting modem line changes,
Sasha Levin
- [PATCH AUTOSEL 4.4 20/35] serial: 8250_pci: make setup_port() parameters explicitly unsigned,
Sasha Levin
- [PATCH AUTOSEL 4.4 17/35] serial: 8250: Define RX trigger levels for OxSemi 950 devices,
Sasha Levin
- [PATCH AUTOSEL 4.4 09/35] tty: serial: jsm: hold port lock when reporting modem line changes,
Sasha Levin
- [PATCH AUTOSEL 4.9 24/48] serial: 8250_pci: make setup_port() parameters explicitly unsigned,
Sasha Levin
- [PATCH AUTOSEL 4.9 21/48] serial: 8250: Define RX trigger levels for OxSemi 950 devices,
Sasha Levin
- [PATCH AUTOSEL 4.14 26/59] serial: 8250_pci: make setup_port() parameters explicitly unsigned,
Sasha Levin
- [PATCH AUTOSEL 4.14 23/59] serial: 8250: Define RX trigger levels for OxSemi 950 devices,
Sasha Levin
- [PATCH AUTOSEL 4.14 14/59] tty: serial: jsm: hold port lock when reporting modem line changes,
Sasha Levin
- [PATCH AUTOSEL 4.19 15/74] tty: serial: jsm: hold port lock when reporting modem line changes,
Sasha Levin
- [PATCH AUTOSEL 5.4 072/109] serial: sh-sci: fix break handling for sysrq,
Sasha Levin
- [PATCH AUTOSEL 5.4 038/109] serial: 8250_pci: make setup_port() parameters explicitly unsigned,
Sasha Levin
- [PATCH AUTOSEL 5.4 035/109] serial: 8250: Define RX trigger levels for OxSemi 950 devices,
Sasha Levin
- [PATCH AUTOSEL 5.4 022/109] tty: serial: jsm: hold port lock when reporting modem line changes,
Sasha Levin
- [PATCH AUTOSEL 5.10 117/176] serial: sh-sci: fix break handling for sysrq,
Sasha Levin
- [PATCH AUTOSEL 5.10 081/176] serial: 8250_omap: Handle optional overrun-throttle-ms property,
Sasha Levin
- [PATCH AUTOSEL 5.10 056/176] serial: 8250_pci: make setup_port() parameters explicitly unsigned,
Sasha Levin
- [PATCH AUTOSEL 5.10 053/176] serial: 8250: Define RX trigger levels for OxSemi 950 devices,
Sasha Levin
- [PATCH AUTOSEL 5.10 029/176] tty: serial: jsm: hold port lock when reporting modem line changes,
Sasha Levin
- [PATCH AUTOSEL 5.13 144/219] serial: sh-sci: fix break handling for sysrq,
Sasha Levin
- [PATCH AUTOSEL 5.13 101/219] serial: 8250_omap: Handle optional overrun-throttle-ms property,
Sasha Levin
- [PATCH AUTOSEL 5.13 070/219] serial: 8250_pci: make setup_port() parameters explicitly unsigned,
Sasha Levin
- [PATCH AUTOSEL 5.13 067/219] serial: 8250: Define RX trigger levels for OxSemi 950 devices,
Sasha Levin
- [PATCH AUTOSEL 5.13 039/219] tty: serial: jsm: hold port lock when reporting modem line changes,
Sasha Levin
- [PATCH AUTOSEL 5.14 163/252] serial: sh-sci: fix break handling for sysrq,
Sasha Levin
- [PATCH AUTOSEL 5.14 115/252] serial: 8250_omap: Handle optional overrun-throttle-ms property,
Sasha Levin
- [PATCH AUTOSEL 5.14 081/252] serial: 8250_pci: make setup_port() parameters explicitly unsigned,
Sasha Levin
- [PATCH AUTOSEL 5.14 078/252] serial: max310x: Use clock-names property matching to recognize EXTCLK,
Sasha Levin
- [PATCH AUTOSEL 5.14 077/252] serial: 8250: Define RX trigger levels for OxSemi 950 devices,
Sasha Levin
- [PATCH AUTOSEL 5.14 047/252] tty: serial: jsm: hold port lock when reporting modem line changes,
Sasha Levin
- [PATCH v2 0/8] arm64: dts: initial NXP S32G2 support,
Chester Lin
- [PATCH] serial: 8250_pci: Prefer struct_size over open coded arithmetic,
Len Baker
- [PATCH] serial: 8250: 8250_omap: Fix RX_LVL register offset,
Nishanth Menon
- [GIT PULL] TTY/Serial driver changes for 5.15-rc1,
Greg KH
- [tty:tty-testing] BUILD SUCCESS 2e5f3a69b6fcd52a64ce3d746c6ee8390b6cabe8,
kernel test robot
- [PATCH] tty: serial: UART driver for RISC-V based Chromite SoC family,
Sathish Kumar Balasubramaniam -ERS, HCL Tech
- [tty:tty-testing] BUILD SUCCESS bb2853a6a421a052268eee00fd5d3f6b3504b2b1,
kernel test robot
- [PATCH] tty: serial: uartlite: Use constants in early_uartlite_putc,
Sean Anderson
- [PATCH v2] tty: serial: uartlite: Use read_poll_timeout for a polling loop,
Sean Anderson
- [PATCH v3 0/4] tty: serial: uartlite: Disable changing fixed parameters,
Sean Anderson
- question about uart_state xmit buffer behavior,
Patrick Havelange
- [PATCH] dt-bindings: Use 'enum' instead of 'oneOf' plus 'const' entries,
Rob Herring
- [v3,04/12] pinctrl: mediatek: moore: check if pin_desc is valid before use,
Sam Shih
- [PATCH] tty: serial: linflexuart: Remove redundant check to simplify the code,
Tang Bin
- [PATCH] tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp,
Sherry Sun
- [PATCH] tty: serial: fsl_lpuart: enable two stop bits for lpuart32,
Sherry Sun
- [PATCH 0/3] serial: Use of_device_get_match_data,
Tang Bin
- Re: [v2,06/12] pinctrl: mediatek: add support for MT7986 SoC,
sean.wang
- Re: [v2, 04/12] pinctrl: mediatek: moore: check if pin_desc is valid before use,
sean.wang
- [PATCH] dt-bindings: serial: brcm,bcm6345-uart: convert to the json-schema,
Rafał Miłecki
- [tty:tty-testing] BUILD SUCCESS 88c1d2478ec8a420cf60a3c25503e37b34fea5aa,
kernel test robot
- [PATCH V3] tty: serial: fsl_lpuart: fix the wrong mapbase value,
Sherry Sun
- [PATCH V2] tty: serial: fsl_lpuart: fix the wrong mapbase value,
Sherry Sun
- [tty:tty-testing] BUILD SUCCESS 1143637f00cd8205c43bad702b2aff57c01913f8,
kernel test robot
- [PATCH] serial: 8250_exar: Add missing call to pci_free_irq_vectors(),
Utkarsh Verma
- [PATCH] tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback,
Sherry Sun
- [PATCH] serial: 8250_mid: Use pci_irq_vector() to get IRQ,
Utkarsh Verma
- [v2,00/12] Add basic SoC support for mediatek mt7986,
Sam Shih
- [v2,01/12] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC,
Sam Shih
- [v2,02/12] clk: mediatek: add mt7986 clock IDs,
Sam Shih
- [v2,04/12] pinctrl: mediatek: moore: check if pin_desc is valid before use,
Sam Shih
- [v2,03/12] clk: mediatek: add mt7986 clock support,
Sam Shih
- [v2,05/12] dt-bindings: pinctrl: update bindings for MT7986 SoC,
Sam Shih
- [v2,07/12] dt-bindings: arm64: dts: mediatek: Add mt7986 series,
Sam Shih
- [v2,06/12] pinctrl: mediatek: add support for MT7986 SoC,
Sam Shih
- [v2,09/12] dt-bindings: serial: Add compatible for Mediatek MT7986,
Sam Shih
- [v2,08/12] dt-bindings: rng: mediatek: add mt7986 to mtk rng binding,
Sam Shih
- [v2,10/12] dt-bindings: watchdog: Add compatible for Mediatek MT7986,
Sam Shih
- [v2,11/12] arm64: dts: mediatek: add mt7986a support,
Sam Shih
- [v2,12/12] arm64: dts: mediatek: add mt7986b support,
Sam Shih
- [PATCH] tty: serial: fsl_lpuart: fix the wrong mapbase value,
Sherry Sun
- [PATCH] serial: sh-sci: fix break handling for sysrq,
Ulrich Hecht
- [PATCH] serial: stm32: use devm_platform_get_and_ioremap_resource(),
Tang Bin
- [PATCH] serial: stm32: use the defined variable to simplify code,
Tang Bin
- [tty:tty-testing] BUILD SUCCESS 9a4d22f7955ee365f7829859f599a01b3ffd850b,
kernel test robot
- [PATCH] Revert "arm pl011 serial: support multi-irq request",
Qian Cai
- [PATCH v6] arm pl011 serial: support multi-irq request,
Bing Fan
- Re: [PATCH v6] arm pl011 serial: support multi-irq request,
Robin Murphy
- Re: [PATCH v6] arm pl011 serial: support multi-irq request,
Russell King (Oracle)
serial: sh-sci: Is there a potential buffer underflow in sci_dma_rx_complete()?,
Tuo Li
[PATCH v3 0/7] Add minimal support for Exynos850 SoC,
Sam Protsenko
[PATCH] serial: stm32: fix the conditional expression writing,
Tang Bin
[tty:tty-testing] BUILD SUCCESS 15e580283f2654b3455970c404ae363197aa176d,
kernel test robot
[GIT PULL] TTY/Serial driver fixes for 5.14-rc5,
Greg KH
[PATCH v2] parisc: Make struct parisc_driver::remove() return void,
Uwe Kleine-König
[PATCH v2 0/8] Add minimal support for Exynos850 SoC,
Sam Protsenko
[PATCH v3 1/2] serdev: Split and export serdev_acpi_get_uart_resource(),
Andy Shevchenko
[PATCH] parisc: Make struct parisc_driver::remove() return void,
Uwe Kleine-König
[tty:tty-testing] BUILD SUCCESS 1fe0e1fa3209ad8e9124147775bd27b1d9f04bd4,
kernel test robot
[PATCH 0/8] arm64: dts: initial NXP S32G2 support,
Chester Lin
Re: [PATCH v3] ioctl_tty.2: Add example how to get or set baudrate on the serial port,
Pali Rohár
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Site Home]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
[Linux Kernel for ARM]
