Re: [PATCH v2 07/13] clk: imx: Add initial support for i.MXRT clock driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jesse, All,

this is a specific driver for imxrt1050, for example imxrt1020 is totally different while imxrt1060 is similar, so commit log needs to change to i.MXRT1050,

On 11/2/21 11:56 PM, Jesse Taube wrote:
From: Jesse Taube <mr.bossman075@xxxxxxxxx>

This patch adds initial clock driver support for the i.MXRT series.

Here too ^^^


Signed-off-by: Jesse Taube <Mr.Bossman075@xxxxxxxxx>
Suggested-by: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxxxxxxxx>
---
V1->V2:
* Kconfig: Add new line
* clk-imxrt.c: Remove unused const
* clk-imxrt.c: Remove set parents
* clk-imxrt.c: Use fsl,imxrt-anatop for anatop base address
---
  drivers/clk/imx/Kconfig     |   4 +
  drivers/clk/imx/Makefile    |   1 +
  drivers/clk/imx/clk-imxrt.c | 149 ++++++++++++++++++++++++++++++++++++

Here we need this file ^^^ to be clk-imxrt1050.c

  3 files changed, 154 insertions(+)
  create mode 100644 drivers/clk/imx/clk-imxrt.c

diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
index 47d9ec3abd2f..f83ba5fe8cd3 100644
--- a/drivers/clk/imx/Kconfig
+++ b/drivers/clk/imx/Kconfig
@@ -98,3 +98,7 @@ config CLK_IMX8QXP
  	select MXC_CLK_SCU
  	help
  	  Build the driver for IMX8QXP SCU based clocks.
+
+config CLK_IMXRT

CLK_IMXRT1050

+	def_bool SOC_IMXRT
+	select MXC_CLK
diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index c24a2acbfa56..6a3fee6cd9af 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -45,3 +45,4 @@ obj-$(CONFIG_CLK_IMX6UL) += clk-imx6ul.o
  obj-$(CONFIG_CLK_IMX7D)  += clk-imx7d.o
  obj-$(CONFIG_CLK_IMX7ULP) += clk-imx7ulp.o
  obj-$(CONFIG_CLK_VF610)  += clk-vf610.o
+obj-$(CONFIG_CLK_IMXRT)  += clk-imxrt.o

CONFIG_CLK_IMXRT1050

diff --git a/drivers/clk/imx/clk-imxrt.c b/drivers/clk/imx/clk-imxrt.c
new file mode 100644
index 000000000000..8e235925cdb7
--- /dev/null
+++ b/drivers/clk/imx/clk-imxrt.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2021
+ * Author(s):
+ * Jesse Taube <Mr.Bossman075@xxxxxxxxx>
+ * Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxxxxxxxx>
+ */
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sizes.h>
+#include <soc/imx/revision.h>
+#include <dt-bindings/clock/imxrt1050-clock.h>

Indeed here the include is imxrt1050-clock.h and every macro below starts with IMXRT1050_ prefix

+
+#include "clk.h"
+#define ANATOP_BASE_ADDR	0x400d8000
+
+static const char * const pll_ref_sels[] = {"osc", "dummy", };
+static const char * const per_sels[] = {"ipg_pdof", "osc", };
+static const char * const pll1_bypass_sels[] = {"pll1_arm", "pll1_arm_ref_sel", };
+static const char * const pll2_bypass_sels[] = {"pll2_sys", "pll2_sys_ref_sel", };
+static const char * const pll3_bypass_sels[] = {"pll3_usb_otg", "pll3_usb_otg_ref_sel", };
+static const char * const pll5_bypass_sels[] = {"pll5_video", "pll5_video_ref_sel", };
+static const char *const pre_periph_sels[] = {
+	"pll2_sys", "pll2_pfd2_396m", "pll2_pfd0_352m", "arm_podf", };
+static const char *const periph_sels[] = { "pre_periph_sel", "todo", };
+static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *const lpuart_sels[] = { "pll3_80m", "osc", };
+static const char *const lcdif_sels[] = {
+	"pll2_sys", "pll3_pfd3_454_74m", "pll5_video", "pll2_pfd0_352m",
+	"pll2_pfd1_594m", "pll3_pfd1_664_62m", };
+
+static struct clk *clk[IMXRT1050_CLK_END];
+static struct clk_onecell_data clk_data;
+
+static void __init imxrt_clocks_common_init(void __iomem *base)
+{
+	/* Anatop clocks */
+	clk[IMXRT1050_CLK_DUMMY] = imx_clk_fixed("dummy", 0UL);
+
+	clk[IMXRT1050_CLK_PLL1_REF_SEL] = imx_clk_mux("pll1_arm_ref_sel",
+		base + 0x0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+	clk[IMXRT1050_CLK_PLL2_REF_SEL] = imx_clk_mux("pll2_sys_ref_sel",
+		base + 0x30, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+	clk[IMXRT1050_CLK_PLL3_REF_SEL] = imx_clk_mux("pll3_usb_otg_ref_sel",
+		base + 0x10, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+	clk[IMXRT1050_CLK_PLL5_REF_SEL] = imx_clk_mux("pll5_video_ref_sel",
+		base + 0xa0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+
+	clk[IMXRT1050_CLK_PLL1_ARM] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_arm",
+		"pll1_arm_ref_sel", base + 0x0, 0x7f);
+	clk[IMXRT1050_CLK_PLL2_SYS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_sys",
+		"pll2_sys_ref_sel", base + 0x30, 0x1);
+	clk[IMXRT1050_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg",
+		"pll3_usb_otg_ref_sel", base + 0x10, 0x1);
+	clk[IMXRT1050_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video",
+		"pll5_video_ref_sel", base + 0xa0, 0x7f);
+
+	/* PLL bypass out */
+	clk[IMXRT1050_CLK_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x0, 16, 1,
+		pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[IMXRT1050_CLK_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1,
+		pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[IMXRT1050_CLK_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1,
+		pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[IMXRT1050_CLK_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1,
+		pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+
+	clk[IMXRT1050_CLK_VIDEO_POST_DIV_SEL] = imx_clk_divider("video_post_div_sel",
+		"pll5_video", base + 0xa0, 19, 2);
+	clk[IMXRT1050_CLK_VIDEO_DIV] = imx_clk_divider("video_div",
+		"video_post_div_sel", base + 0x170, 30, 2);
+
+	clk[IMXRT1050_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m",  "pll3_usb_otg", 1, 6);
+
+	clk[IMXRT1050_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_sys", base + 0x100, 0);
+	clk[IMXRT1050_CLK_PLL2_PFD1_594M] = imx_clk_pfd("pll2_pfd1_594m", "pll2_sys", base + 0x100, 1);
+	clk[IMXRT1050_CLK_PLL2_PFD2_396M] = imx_clk_pfd("pll2_pfd2_396m", "pll2_sys", base + 0x100, 2);
+	clk[IMXRT1050_CLK_PLL3_PFD1_664_62M] = imx_clk_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base + 0xf0, 1);
+	clk[IMXRT1050_CLK_PLL3_PFD3_454_74M] = imx_clk_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base + 0xf0, 3);
+}
+
+static void __init imxrt1050_clocks_init(struct device_node *np)
+{
+	void __iomem *ccm_base;
+	void __iomem *pll_base;
+	struct device_node *anp;
+
+	clk[IMXRT1050_CLK_OSC] = of_clk_get_by_name(np, "osc");
+
+	anp = of_find_compatible_node(NULL, NULL, "fsl,imxrt-anatop");
+	pll_base = of_iomap(anp, 0);
+	WARN_ON(!pll_base);
+	imxrt_clocks_common_init(pll_base);
+	/* CCM clocks */
+	ccm_base = of_iomap(np, 0);
+	WARN_ON(!ccm_base);
+
+	clk[IMXRT1050_CLK_ARM_PODF] = imx_clk_divider("arm_podf", "pll1_arm", ccm_base + 0x10, 0, 3);
+	clk[IMXRT1050_CLK_PRE_PERIPH_SEL] = imx_clk_mux("pre_periph_sel", ccm_base + 0x18, 18, 2,
+		pre_periph_sels, ARRAY_SIZE(pre_periph_sels));
+	clk[IMXRT1050_CLK_PERIPH_SEL] = imx_clk_mux("periph_sel", ccm_base + 0x14, 25, 1,
+		periph_sels, ARRAY_SIZE(periph_sels));
+	clk[IMXRT1050_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", ccm_base + 0x1c, 16, 1,
+		usdhc_sels, ARRAY_SIZE(usdhc_sels));
+	clk[IMXRT1050_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", ccm_base + 0x1c, 17, 1,
+		usdhc_sels, ARRAY_SIZE(usdhc_sels));
+	clk[IMXRT1050_CLK_LPUART_SEL] = imx_clk_mux("lpuart_sel", ccm_base + 0x24, 6, 1,
+		lpuart_sels, ARRAY_SIZE(lpuart_sels));
+	clk[IMXRT1050_CLK_LCDIF_SEL] = imx_clk_mux("lcdif_sel", ccm_base + 0x38, 15, 3,
+		lcdif_sels, ARRAY_SIZE(lcdif_sels));
+	clk[IMXRT1050_CLK_PER_CLK_SEL] = imx_clk_mux("per_sel", ccm_base + 0x1C, 6, 1,
+		per_sels, ARRAY_SIZE(per_sels));
+
+	clk[IMXRT1050_CLK_AHB_PODF] = imx_clk_divider("ahb", "periph_sel", ccm_base + 0x14, 10, 3);
+	clk[IMXRT1050_CLK_IPG_PDOF] = imx_clk_divider("ipg", "ahb", ccm_base + 0x14, 8, 2);
+	clk[IMXRT1050_CLK_PER_PDOF] = imx_clk_divider("per", "per_sel", ccm_base + 0x1C, 0, 5);
+
+	clk[IMXRT1050_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", ccm_base + 0x24, 11, 3);
+	clk[IMXRT1050_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", ccm_base + 0x24, 16, 3);
+	clk[IMXRT1050_CLK_LPUART_PODF] = imx_clk_divider("lpuart_podf", "lpuart_sel", ccm_base + 0x24, 0, 6);
+	clk[IMXRT1050_CLK_LCDIF_PRED] = imx_clk_divider("lcdif_pred", "lcdif_sel", ccm_base + 0x38, 12, 3);
+	clk[IMXRT1050_CLK_LCDIF_PODF] = imx_clk_divider("lcdif_podf", "lcdif_pred", ccm_base + 0x18, 23, 3);
+
+	clk[IMXRT1050_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", ccm_base + 0x80, 2);
+	clk[IMXRT1050_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", ccm_base + 0x80, 4);
+	clk[IMXRT1050_CLK_LPUART1] = imx_clk_gate2("lpuart1", "lpuart_podf", ccm_base + 0x7c, 24);
+	clk[IMXRT1050_CLK_LCDIF_APB] = imx_clk_gate2("lcdif", "lcdif_podf", ccm_base + 0x74, 10);
+	clk[IMXRT1050_CLK_DMA] = imx_clk_gate("dma", "ipg", ccm_base + 0x7C, 6);
+	clk[IMXRT1050_CLK_DMA_MUX] = imx_clk_gate("dmamux0", "ipg", ccm_base + 0x7C, 7);
+
+	imx_check_clocks(clk, ARRAY_SIZE(clk));
+	clk_data.clks = clk;
+	clk_data.clk_num = ARRAY_SIZE(clk);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+	clk_prepare_enable(clk[IMXRT1050_CLK_PLL1_ARM]);
+	clk_prepare_enable(clk[IMXRT1050_CLK_PLL2_SYS]);
+	clk_prepare_enable(clk[IMXRT1050_CLK_PLL3_USB_OTG]);
+	clk_prepare_enable(clk[IMXRT1050_CLK_PLL3_PFD1_664_62M]);
+	clk_prepare_enable(clk[IMXRT1050_CLK_PLL2_PFD2_396M]);
+}
+CLK_OF_DECLARE(imxrt_ccm, "fsl,imxrt1050-ccm", imxrt1050_clocks_init);


Thank you
and
Best regards
--
Giulio Benetti
Benetti Engineering sas



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux