Linux Input

• Thread Index

• Re: [PATCH v3 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/4] Input: zforce - swap reset and interrupt GPIO
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/4] Input: zforce - swap reset and interrupt GPIO
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] Input: zforce_ts - fix playload length check
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] HID: use generic driver for ThingM blink(1) if !CONFIG_HID_THINGM
  • From: Reilly Grant <reillyg@xxxxxxxxxxxx>
• Re: ALPS DualPoint double click bug
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 5/5] ARM: dts: imx6ul-14x14-evk.dts: add tsc support
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] HID: core: do not reject devices when they declare too many usages
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• [PATCH 0/5] Add imx6ul touch screen controller support
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• [PATCH 1/5] input: touchscreen: add imx6ul_tsc driver support
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: dts: imx6ul.dtsi: add TSC support
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• [PATCH 3/5] ARM: imx_v6_v7_defconfig: enable imx6ul_tsc
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• Re: [PATCH 2/5] Documentation: Detail permitted DT properties for the imx6ul_tsc
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• [PATCH 4/5] ARM: dts: imx6ul.dtsi: add TSC support
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• [PATCH 5/5] ARM: dts: imx6ul-14x14-evk.dts: add tsc support
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• [PATCH 2/5] Documentation: Detail permitted DT properties for the imx6ul_tsc
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v3 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/4] Input: zforce - swap reset and interrupt GPIO
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• [PATCH] Input: da9052_onkey: Convert to managed resources
  • From: Vaishali Thakkar <vthakkar1994@xxxxxxxxx>
• [RFC ebeam PATCH v2 0/2] Add a new USB eBeam input driver
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• [RFC ebeam PATCH v2 2/2] input: misc: New USB eBeam input driver
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• [RFC ebeam PATCH v2 1/2] hid: Blacklist eBeam devices
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: ALPS DualPoint double click bug
  • From: Douglas Christman <douglaschristman@xxxxxxxxx>
• Re: [PATCH 0/8] Input: xpad: fix wireless pad connection and URB out
  • From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
• Re: [PATCH 2/4] Input: zforce - swap reset and interrupt GPIO
  • From: Dirk Behme <dirk.behme@xxxxxxxxx>
• [git pull] Input updates for 4.2-rc3
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/4] Input: zforce - swap reset and interrupt GPIO
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• SYN1B7F:00 06CB:2970 UNKNOWN does not work with Kernel 4.2.x anymore Edit
  • From: "Roman Bange" <mofasofa123@xxxxxx>
• Re: [PATCH 2/3] HID: apple: Add support for the 2015 Macbook Pro
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH 2/3] HID: apple: Add support for the 2015 Macbook Pro
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [RFC PATCH 2/2] Input: evifpanel: show sliders through sysfs
  • From: Joshua Clayton <stillcompiling@xxxxxxxxx>
• [RFC PATCH 1/2] Input: add Uniwest EVI front panel driver
  • From: Joshua Clayton <stillcompiling@xxxxxxxxx>
• [PATCH 3/3] Input: bcm597 - Add support for the 2015 Macbook Pro
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• [PATCH 2/3] HID: apple: Add support for the 2015 Macbook Pro
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• [PATCH 1/3] Input: bcm5974 - Prepare for a new trackpad generation
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH v3] Input: goodix - Fix touch coords on WinBook TW100 and TW700
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2] Input: goodix - Fix touch coords on WinBook TW100 and TW700
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [PATCH v2] Input: goodix - Fix touch coords on WinBook TW100 and TW700
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] HID: core: do not reject devices when they declare too many usages
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH] hid: sony: Drop invalid Sixaxis input reports
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH] HID:multitouch:add driver for CJTouch MultiTouch
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH v2] HID: microsoft: Add Surface 3 type cover
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• [PATCH v3] Input: goodix - Fix touch coords on WinBook TW100 and TW700
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [PATCH v2] Input: goodix - Fix touch coords on WinBook TW100 and TW700
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [PATCH] Input: LEDs - skip unnamed LEDs
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] Input: LEDs - skip unnamed LEDs
  • From: Vlastimil Babka <vbabka@xxxxxxx>
• [PATCH 1/3] input: cyapa: add regulator vcc support
  • From: Dudley Du <dudl@xxxxxxxxxxx>
• [PATCH 2/3] input: cyapa: add of match device support and description document
  • From: Dudley Du <dudl@xxxxxxxxxxx>
• [PATCH 3/3] input: cyapa: fix output unwanted warning issue
  • From: Dudley Du <dudl@xxxxxxxxxxx>
• [PATCH 0/3] cyapa patches instruction
  • From: Dudley Du <dudl@xxxxxxxxxxx>
• [PATCH] HID: hid-lg: Add USBID for Logitech G29 Wheel
  • From: Simon Wood <simon@xxxxxxxxxxxxx>
• Re: [PATCH] hid: sony: Drop invalid Sixaxis input reports
  • From: simon@xxxxxxxxxxxxx
• [PATCH] hid: sony: Drop invalid Sixaxis input reports
  • From: Frank Praznik <frank.praznik@xxxxxxxxx>
• Re: [PATCH 2/2] CHROMIUM: elants_i2c.c: Disable idle mode before firmware upgrade procedure.
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2] Input: goodix - Fix touch coords on WinBook TW100 and TW700
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: LEDs - skip unnamed LEDs
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: LEDs - skip unnamed LEDs
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/1] Avoid unresponsive TSC-30 touch screen
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: LEDs - skip unnamed LEDs
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] input: twl4030-vibra: Fix ERROR: Bad of_node_put() warning
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] input: twl4030-vibra: Fix ERROR: Bad of_node_put() warning
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v4] Input: Add userio module
  • From: Stephen Chandler Paul <cpaul@xxxxxxxxxx>
• Re: [PATCHv7 14/15] cec: s5p-cec: Add s5p-cec driver
  • From: Hans Verkuil <hansverk@xxxxxxxxx>
• Re: [PATCH 00/11] Input: synaptics-rmi4: various fixes for the existing rmi4 branch
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
• Re: [RFC_v2 0/4] HID: hid-sony: Add IIO Suport for Motion Controllers
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [PATCHv7 14/15] cec: s5p-cec: Add s5p-cec driver
  • From: Kamil Debski <kamil@xxxxxxxxx>
• [PATCH V3 1/3] mfd: da9062: Support for the DA9063 OnKey in the DA9062 core
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH V3 2/3] onkey: da9063: Add DA9062 OnKey capability to DA9063 OnKey driver
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH V3 3/3] devicetree: da9062: Add device tree bindings for DA9062 OnKey
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH V3 0/3] da9062: Add DA9062 OnKey support using the existing DA9063 OnKey driver
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH v2] HID: update PenMount USB report descriptor so that only one button is reported
  • From: Andrew Shadura <andrew.shadura@xxxxxxxxxxxxxxx>
• Re: [PATCH V3 2/3] devicetree: da9062: Add device tree bindings for DA9062 RTC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH V3 1/3] mfd: da9062: Support for the DA9063 RTC in the DA9062 core
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH V2 1/3] mfd: da9062: Support for the DA9063 OnKey in the DA9062 core
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH V2 3/3] devicetree: da9062: Add device tree bindings for DA9062 OnKey
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 1/1] Avoid unresponsive TSC-30 touch screen
  • From: Bernhard Bender <Bernhard.Bender@xxxxxxxxxxxx>
• [PATCH v3 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v3 0/2] pixcir_i2c_ts: Add optional wakeup irq support
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v3 2/2] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_tsc
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2] Input: goodix - Fix touch coords on WinBook TW100 and TW700
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: Potential data race in psmouse_interrupt
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: Potential data race in psmouse_interrupt
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/3] HID: wacom: Perform all event processing as part of report processing
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: How to add support for Motorola RZ100?
  • From: Hanno Zulla <abos@xxxxxxxx>
• Re: How to add support for Motorola RZ100?
  • From: Hanno Zulla <abos@xxxxxxxx>
• Re: How to add support for Motorola RZ100?
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• How to add support for Motorola RZ100?
  • From: Hanno Zulla <abos@xxxxxxxx>
• Re: ALPS DualPoint double click bug
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Alban <albeu@xxxxxxx>
• RE: [PATCH] Input: ads7846 - correct the value get from SPI
  • From: Chen Bough <Haibo.Chen@xxxxxxxxxxxxx>
• Re: [PATCH] Input: LEDs - skip unnamed LEDs
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH] Input: LEDs - skip unnamed LEDs
  • From: Vlastimil Babka <vbabka@xxxxxxx>
• Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
  • From: Vlastimil Babka <vbabka@xxxxxxx>
• [PATCH v2] HID: microsoft: Add Surface 3 type cover
  • From: Stephen Just <stephenjust@xxxxxxxxx>
• [PATCH 2/2] Input - elantech: Add special check for fw_version 0x470f01 touchpad
  • From: duson <dusonlin@xxxxxxxxxx>
• RE: [PATCH] Input - elantech: Add special check for fw_version 0x470f01 touchpad
  • From: "DusonLin" <dusonlin@xxxxxxxxxx>
• [PATCH] Input: LEDs - skip unnamed LEDs
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFC v3 1/1] Input: Add userio module
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [RFC v3 1/1] Input: Add userio module
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
• Re: [RFC v3 1/1] Input: Add userio module
  • From: Stephen Chandler Paul <cpaul@xxxxxxxxxx>
• Re: [PATCH] Input - elantech: Add special check for fw_version 0x470f01 touchpad
  • From: ulrik.debie-os@xxxxxxxxx
• [PATCH 1/5] Input: tsc2005 - improve readability of register defines
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 2/5] Input: tsc2005 - fix Kconfig indentation
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 3/5] Input: tsc2005 - convert to regmap
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 4/5] Input: tsc2005 - simplify drvdata acquisition
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 5/5] Input: tsc2005 - convert to gpiod
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 0/5] [input] tsc2005 cleanup
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [RFC v3 1/1] Input: Add userio module
  • From: Stephen Chandler Paul <cpaul@xxxxxxxxxx>
• [RFC v3 0/1] userio (originally ps2emu) - virtual serio device module
  • From: Stephen Chandler Paul <cpaul@xxxxxxxxxx>
• Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxx>
• [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Alban Bedel <albeu@xxxxxxx>
• Re: ALPS DualPoint double click bug
  • From: Stephen Chandler Paul <cpaul@xxxxxxxxxx>
• [PATCH v2] Add generic driver for Silead tochscreens
  • From: Robert Dolca <robert.dolca@xxxxxxxxx>
• Re: Fwd: Potential data race in psmouse_interrupt
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: ALPS DualPoint double click bug
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
• Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
  • From: Vlastimil Babka <vbabka@xxxxxxx>
• [PATCH] Input - elantech: Add special check for fw_version 0x470f01 touchpad
  • From: duson <dusonlin@xxxxxxxxxx>
• Fwd: Potential data race in psmouse_interrupt
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
  • From: Vlastimil Babka <vbabka@xxxxxxx>
• Re: ALPS DualPoint double click bug
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v2 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50
  • From: maitysanchayan@xxxxxxxxx
• Re: [PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: ALPS DualPoint double click bug
  • From: Douglas Christman <douglaschristman@xxxxxxxxx>
• Re: [RFC 1/1 v2] Input: Add ps2emu module
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [RFC 1/1 v2] Input: Add ps2emu module
  • From: Stephen Chandler Paul <cpaul@xxxxxxxxxx>
• Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFC] ps2emu - PS/2 emulation module
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [RFC 1/1 v2] Input: Add ps2emu module
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [RFC 1/1 v2] Input: Add ps2emu module
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RFC 1/1 v2] Input: Add ps2emu module
  • From: Stephen Chandler Paul <cpaul@xxxxxxxxxx>
• Re: [RFC] Input: Add ps2emu module
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] Input: Add ps2emu module
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RFC] ps2emu - PS/2 emulation module
  • From: Stephen Chandler Paul <cpaul@xxxxxxxxxx>
• [RFC] Input: Add ps2emu module
  • From: Stephen Chandler Paul <cpaul@xxxxxxxxxx>
• [PATCH 3/3] HID: wacom: Report touch width/height/orientation for GENERIC devices
  • From: Jason Gerecke <killertofu@xxxxxxxxx>
• [PATCH 2/3] HID: wacom: Ignore contacts in excess of declared contact count
  • From: Jason Gerecke <killertofu@xxxxxxxxx>
• [PATCH 1/3] HID: wacom: Perform all event processing as part of report processing
  • From: Jason Gerecke <killertofu@xxxxxxxxx>
• Re: [PATCH] hid: Drop owner assignment from i2c_driver
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH v2 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: ALPS DualPoint double click bug
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH] Input: synaptics: dump ext10 capabilities as well
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [RFC ebeam PATCH 2/2] input: misc: New USB eBeam input driver
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• [PATCH] Input: synaptics: dump ext10 capabilities as well
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH] Add generic driver for Silead tochscreens
  • From: Gregor Riepl <onitake@xxxxxxxxx>
• Re: [PATCHv7 14/15] cec: s5p-cec: Add s5p-cec driver
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH] Input: ads7846 - correct the value get from SPI
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [RFC ebeam PATCH 2/2] input: misc: New USB eBeam input driver
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: [RFC ebeam PATCH 2/2] input: misc: New USB eBeam input driver
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
  • From: Vlastimil Babka <vbabka@xxxxxxx>
• [PATCH V3 3/3] rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH V3 2/3] devicetree: da9062: Add device tree bindings for DA9062 RTC
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH acer-switch12-keyboard] hid core: Enable support for Fn+ controls keys on Acer Aspire Switch 12 keyboard
  • From: Николай Кудрявцев <nkudriavtsev@xxxxxxxxx>
• [PATCH V3 1/3] mfd: da9062: Support for the DA9063 RTC in the DA9062 core
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH V3 0/3] da9062: Add DA9062 RTC support using the existing DA9063 RTC driver
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• RE: [PATCH V2 3/3] rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver
  • From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
• Re: [PATCH V2 3/3] rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH V2 2/3] devicetree: da9062: Add device tree bindings for DA9062 RTC
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH V2 3/3] rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH V2 1/3] mfd: da9062: Support for the DA9063 RTC in the DA9062 core
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH V2 0/3] da9062: Add DA9062 RTC support using the existing DA9063 RTC driver
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• Re: [PATCH 4/4 v2] Input: zforce - enable irq only if we are ready to process it
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• Re: [PATCH RFC V1 2/3] rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [RFC ebeam PATCH 2/2] input: misc: New USB eBeam input driver
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• RE: [PATCH RFC V1 2/3] rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver
  • From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
• Re: ALPS DualPoint double click bug
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• RE: [PATCH] Input: ads7846 - correct the value get from SPI
  • From: Chen Bough <Haibo.Chen@xxxxxxxxxxxxx>
• Re: ALPS DualPoint double click bug
  • From: Douglas Christman <douglaschristman@xxxxxxxxx>
• RE: [PATCH] CHROMIUM: elants_i2c.c: Disable idle mode before firmware upgrade procedure.
  • From: "James Chen" <James.chen@xxxxxxxxxx>
• [PATCH 2/2] CHROMIUM: elants_i2c.c: Disable idle mode before firmware upgrade procedure.
  • From: "james.chen" <james.chen@xxxxxxxxxx>
• [PATCH] CHROMIUM: elants_i2c.c: Disable idle mode before firmware upgrade procedure.
  • From: "james.chen" <james.chen@xxxxxxxxxx>
• RE: [PATCH v1 6/7] input: cyapa: add of match device support and description document
  • From: Dudley Du <dudl@xxxxxxxxxxx>
• RE: [PATCH v1 3/7] input: cyapa: add proximity function support for gen5 and gen6 modules
  • From: Dudley Du <dudl@xxxxxxxxxxx>
• Re: [PATCH v1 7/7] input: cyapa: add CYAP0002 Gen6 device for ACPI configuration
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v1 6/7] input: cyapa: add of match device support and description document
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v1 4/7] input: cyapa: fully support runtime suspend power management
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v1 3/7] input: cyapa: add proximity function support for gen5 and gen6 modules
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v1 2/7] input: cyapa: add gen6 device module support in driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [RFC ebeam PATCH 2/2] input: misc: New USB eBeam input driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [RFC ebeam PATCH 2/2] input: misc: New USB eBeam input driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC ebeam PATCH 2/2] input: misc: New USB eBeam input driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [RFC ebeam PATCH 2/2] input: misc: New USB eBeam input driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC V1 2/3] rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Add generic driver for Silead tochscreens
  • From: Robert Dolca <robert.dolca@xxxxxxxxx>
• Re: [PATCH] Add generic driver for Silead tochscreens
  • From: Robert Dolca <robert.dolca@xxxxxxxxx>
• Re: [PATCH RFC V1 3/3] devicetree: da9062: Add device tree bindings for DA9062 RTC
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [RFC ebeam PATCH 2/2] input: misc: New USB eBeam input driver
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• [RFC ebeam PATCH 1/2] hid: Blacklist eBeam devices
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• [RFC ebeam PATCH 0/3] new USB eBeam input driver
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: [PATCH] CHROMIUM: elants_i2c.c: Disable idle mode before firmware upgrade procedure.
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• RE: [PATCH RFC V1 2/3] rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver
  • From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
• RE: [PATCH RFC V1 3/3] devicetree: da9062: Add device tree bindings for DA9062 RTC
  • From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
• Re: [PATCH RESENT] Input: elan_i2c - enable ELAN0600 acpi panels
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 1/4] Input: zforce - don't invert the interrupt GPIO
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/3] Input: zforce - enable irq only if we are ready to process it
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] HID:multitouch:add driver for CJTouch MultiTouch
  • From: linuxsea@xxxxxxx
• [PATCH] Input: goodix - Fix touch coords on WinBook TW100
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [PATCH] Input: arizona-haptic - convert to use managed input devices
  • From: Joshua Clayton <stillcompiling@xxxxxxxxx>
• [PATCH V2 2/3] onkey: da9063: Add DA9062 OnKey capability to DA9063 OnKey driver
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH V2 3/3] devicetree: da9062: Add device tree bindings for DA9062 OnKey
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH V2 0/3] da9062: Add DA9062 OnKey support using the existing DA9063 OnKey driver
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH V2 1/3] mfd: da9062: Support for the DA9063 OnKey in the DA9062 core
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• RE: [PATCH RFC V1 2/3] onkey: da9063: Add DA9062 OnKey capability to DA9063 OnKey driver
  • From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
• [PATCH 4/4 v2] Input: zforce - enable irq only if we are ready to process it
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• [PATCH 3/4 v2] Input: zforce - make the interrupt GPIO optional
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• [PATCH 0/4 v2] Input: zforce - update interrupt handling
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• [PATCH 1/4] Input: zforce - don't invert the interrupt GPIO
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• [PATCH 2/4] Input: zforce - swap reset and interrupt GPIO
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• Re: [PATCH] Add generic driver for Silead tochscreens
  • From: Robert Dolca <robert.dolca@xxxxxxxxx>
• [PATCH] HID: update PenMount USB report descriptor so that only one button is reported
  • From: Andrew Shadura <andrew.shadura@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH RESENT] Input: elan_i2c - enable ELAN0600 acpi panels
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH 6/6] Input: tc3589x-keypad - change name of wakeup property
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 4/6] Input: gpio_keys[_polled] - change name of wakeup property
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: ALPS DualPoint double click bug
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: ALPS DualPoint double click bug
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Add generic driver for Silead tochscreens
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/3] Input: zforce - enable irq only if we are ready to process it
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 0/2] pixcir_i2c_ts: Add optional wakeup irq support
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2 2/2] ARM: dts: AM437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_tsc
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH] HID: microsoft: Add Surface 3 type cover
  • From: Stephen Just <stephenjust@xxxxxxxxx>
• ALPS DualPoint double click bug
  • From: Douglas Christman <douglaschristman@xxxxxxxxx>
• Re: [PATCH v2 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50
  • From: maitysanchayan@xxxxxxxxx
• Re: [PATCH v2 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50
  • From: maitysanchayan@xxxxxxxxx
• Re: [PATCH v2 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50
  • From: Nicolae Rosia <nicolae.rosia@xxxxxxxxx>
• Re: [PATCH 3/6] Input: pmic8xxx-keypad - change name of wakeup property
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• [PATCH 2/6] Input: ads7846 - change name of wakeup property to "wakeup-source"
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 3/6] Input: pmic8xxx-keypad - change name of wakeup property
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 4/6] Input: gpio_keys[_polled] - change name of wakeup property
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 5/6] Input: samsung-keypad - change name of wakeup property
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 6/6] Input: tc3589x-keypad - change name of wakeup property
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 1/6] Input: matrix_keypad - change name of wakeup property to "wakeup-source"
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 0/6] Input: standardize on "wakeup-source" property
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH RFC V1 3/3] devicetree: da9062: Add device tree bindings for DA9062 RTC
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC V1 2/3] rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] input: Drop owner assignment from i2c_driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: arizona-haptic - convert to use managed input devices
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: Connecting input driver to underlying uart
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Add support for SiS i2c touch driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: Connecting input driver to underlying uart
  • From: Joshua Clayton <stillcompiling@xxxxxxxxx>
• Re: [PATCH RFC V1 2/3] onkey: da9063: Add DA9062 OnKey capability to DA9063 OnKey driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3] Input: pmic8xxx-pwrkey - Support shutdown
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/3] Input: zforce - enable irq only if we are ready to process it
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2] input: snvs_pwrkey: use "wakeup-source" as deivce tree property name
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input-polldev:Check poll_interval range while registering input device
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input-polldev:Check poll_interval range while registering input device
  • From: Marcus Overhagen <marcus.overhagen@xxxxxxxxx>
• [PATCH RESENT] Input: elan_i2c - enable ELAN0600 acpi panels
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH] Input-polldev:Check poll_interval range while registering input device
  • From: Anshul Garg <aksgarg1989@xxxxxxxxx>
• Re: [PATCH] HID: rmi: Set F01 interrupt enable register when not set
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH 1/2] HID: wacom: Properly free inputs if 'wacom_allocate_inputs' fails
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• [PATCH 0/2] pixcir_i2c_ts: Add optional wakeup irq support
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 2/2] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_tsc
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2] input: snvs_pwrkey: use "wakeup-source" as deivce tree property name
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH] input: snvs_pwrkey: add linux prefix for wakeup property
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• [PATCH] HID: rmi: Set F01 interrupt enable register when not set
  • From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
• Re: Uinput: Deadlock upon UI_DEV_DESTROY ioctl while a non-zero number of ff_effects is still active (uploaded)
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: Conversion between unsigned and signed for "ff_effects_max" in uinput and input.
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Conversion between unsigned and signed for "ff_effects_max" in uinput and input.
  • From: Elias Vanderstuyft <elias.vds@xxxxxxxxx>
• Uinput: Deadlock upon UI_DEV_DESTROY ioctl while a non-zero number of ff_effects is still active (uploaded)
  • From: Elias Vanderstuyft <elias.vds@xxxxxxxxx>
• Re: [PATCH] Input-polldev:Check poll_interval range while registering input device
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] input: snvs_pwrkey: add linux prefix for wakeup property
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] Input-polldev:Check poll_interval range while registering input device
  • From: Anshul Garg <aksgarg1989@xxxxxxxxx>
• Re: [PATCH 1/3] Input: zforce - use irq handler instead of gpio polling
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input - elantech: force a resolution of 31 u/mm
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] input: ambakmi: Fix system PM by converting to modern callbacks
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v2 1/4] ARM: dts: vfxxx: Add io-channel-cells property for ADC node
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v2 2/4] ARM: dts: vf500-colibri: Add device tree node for touchscreen support
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v2 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v2 4/4] input: Add DT binding documentation for Colibri VF50 touchscreen
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v2 0/4] Add support for touchscreen on Colibri VF50
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• Re: [PATCH] Add generic driver for Silead tochscreens
  • From: Gregor Riepl <onitake@xxxxxxxxx>
• Re: [PATCHv7 14/15] cec: s5p-cec: Add s5p-cec driver
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 4/4] Input: tsc2005 - convert to gpiod
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] input: ambakmi: Fix system PM by converting to modern callbacks
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/4] Input: tsc2005 - convert to regmap
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 4/4] Input: tsc2005 - convert to gpiod
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 3/4] Input: tsc2005 - simplify drvdata acquisition
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 4/4] Input: tsc2005 - convert to gpiod
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 3/4] Input: tsc2005 - simplify drvdata acquisition
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 2/4] Input: tsc2005 - convert to regmap
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 2/4] Input: tsc2005 - convert to regmap
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 4/4] Input: tsc2005 - convert to gpiod
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 3/4] Input: tsc2005 - simplify drvdata acquisition
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/4] Input: tsc2005 - convert to regmap
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Connecting input driver to underlying uart
  • From: Joshua Clayton <stillcompiling@xxxxxxxxx>
• Re: [PATCH v5] i8042: Add unmask_kbd_data option
  • From: Stephen Chandler Paul <cpaul@xxxxxxxxxx>
• Re: [PATCH v5] i8042: Add unmask_kbd_data option
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v5] i8042: Add unmask_kbd_data option
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH] input: snvs_pwrkey: add linux prefix for wakeup property
  • From: Zhi Li <lznuaa@xxxxxxxxx>
• [PATCH v5 1/9] mfd/extcon: max77693: Remove unused extern declarations and max77693_dev members
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v5 2/9] mfd: max77693: Store I2C device type as enum and add default unknown
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v5 3/9] regulator: max77693: Support different register configurations
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v5 4/9] drivers: max77693: Move state container to common header
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v5 5/9] drivers: max77843: Switch to common max77693 state container
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v5 7/9] mfd/extcon: max77843: Rename defines to allow inclusion with max77693
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v5 8/9] regulator: max77693: Add support for MAX77843 device
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v5 9/9] regulator: Remove the max77843 driver
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v5 6/9] mfd/extcon: max77693: Rename defines to allow inclusion with max77843
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v5 0/9] regulator: Merge max77843 into max77693
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH 3/4] Input: tsc2005 - simplify drvdata acquisition
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 2/4] Input: tsc2005 - convert to regmap
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 4/4] Input: tsc2005 - convert to gpiod
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 1/4] Input: tsc2005 - improve readability of register defines
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 0/4] [input] tsc2005 cleanup
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH] Add support for SiS i2c touch driver
  • From: 游擱豪 (yuger_yu) <yuger_yu@xxxxxxx>
• [PATCH] input: snvs_pwrkey: add linux prefix for wakeup property
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH v2] HID: cp2112: fix I2C_SMBUS_BYTE write
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] HID: cp2112: fix I2C_SMBUS_BYTE write
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] HID: cp2112: fix byte order in SMBUS operations
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH v3] Input: pmic8xxx-pwrkey - Support shutdown
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• [PATCH v3] Input: pmic8xxx-pwrkey - Support shutdown
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] Input - elantech: force a resolution of 31 u/mm
  • From: David Herrmann <dh.herrmann@xxxxxxxxx>
• Re: [PATCH v2] HID: cp2112: fix I2C_SMBUS_BYTE write
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] HID: cp2112: fix I2C_SMBUS_BYTE write
  • From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
• [PATCH] Input-polldev:Check poll_interval range while registering input device
  • From: Anshul Garg <aksgarg1989@xxxxxxxxx>
• [PATCH RFC V1 0/3] da9062: Add DA9062 OnKey support using the existing DA9063 OnKey driver
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH RFC V1 3/3] devicetree: da9062: Add device tree bindings for DA9062 OnKey
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH RFC V1 1/3] mfd: da9062: Support for the DA9063 OnKey in the DA9062 core
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH RFC V1 2/3] onkey: da9063: Add DA9062 OnKey capability to DA9063 OnKey driver
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• Re: [PATCH v2] HID: cp2112: fix I2C_SMBUS_BYTE write
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH v2] HID: cp2112: fix I2C_SMBUS_BYTE write
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] HID: cp2112: support i2c write-read transfers in hid-cp2112
  • From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
• Re: [PATCH v3] HID: cp2112: support large i2c transfers in hid-cp2112
  • From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
• Re: [PATCH v2] HID: cp2112: fix I2C_SMBUS_BYTE write
  • From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
• Re: [PATCH 1/3] Input: zforce - use irq handler instead of gpio polling
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• Re: [PATCH] atkbd: add basic debounce support
  • From: Gavin Li <gavinli@xxxxxxxxxxxxxx>
• Re: [PATCH v4 4/9] drivers: max77693: Move state container to common header
  • From: Krzysztof Kozłowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH 2/2] HID: wacom: Set default device name to value from wacom->features
  • From: Jason Gerecke <killertofu@xxxxxxxxx>
• [PATCH 1/2] HID: wacom: Properly free inputs if 'wacom_allocate_inputs' fails
  • From: Jason Gerecke <killertofu@xxxxxxxxx>
• Re: [PATCH v2] Input: pmic8xxx-pwrkey - Support shutdown
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v2] Input: pmic8xxx-pwrkey - Support shutdown
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v2] Input: pmic8xxx-pwrkey - Support shutdown
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2] Input: pmic8xxx-pwrkey - Support shutdown
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v2] Input: pmic8xxx-pwrkey - Support shutdown
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: atkbd - add LED triggers for keyboard state
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2] Input: pmic8xxx-pwrkey - Support shutdown
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• [PATCH v2] Input: pmic8xxx-pwrkey - Support shutdown
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] Input: pmic8xxx-pwrkey - Support shutdown
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] Input: pmic8xxx-pwrkey - Support shutdown
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• [PATCH] Input: atkbd - add LED triggers for keyboard state
  • From: "Jason A. Donenfeld" <Jason@xxxxxxxxx>
• Re: [PATCH v1] HID: cp2112: fix byte order in SMBUS operations
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] HID: cp2112: fix I2C_SMBUS_BYTE write
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] HID: cp2112: fix I2C_SMBUS_BYTE write
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] atkbd: add basic debounce support
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 3/3] Input: zforce - remove zforce_irq
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/3] Input: zforce - enable irq only if we are ready to process it
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 1/3] Input: zforce - use irq handler instead of gpio polling
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: zforce - don't overwrite the stack
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Add generic driver for Silead tochscreens
  • From: Gregor Riepl <onitake@xxxxxxxxx>
• Re: [PATCH] Add generic driver for Silead tochscreens
  • From: Robert Dolca <robert.dolca@xxxxxxxxx>
• Re: [PATCH v1] HID: cp2112: fix byte order in SMBUS operations
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] Add generic driver for Silead tochscreens
  • From: Gregor Riepl <onitake@xxxxxxxxx>
• Re: [PATCH v4 4/9] drivers: max77693: Move state container to common header
  • From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
• [PATCH 3/3] Input: zforce - remove zforce_irq
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• [PATCH 1/3] Input: zforce - use irq handler instead of gpio polling
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• [PATCH 2/3] Input: zforce - enable irq only if we are ready to process it
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• [PATCH] Input: zforce - don't overwrite the stack
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• Re: [PATCH] Add generic driver for Silead tochscreens
  • From: Gregor Riepl <onitake@xxxxxxxxx>
• RE: [PATCH] Input: wdt87xx_i2c - Change the sleep time to 2500ms after the sw reset
  • From: "Hn Chen" <hn.chen@xxxxxxxxxxxxxxx>
• [PATCH v4 0/9] regulator: Merge max77843 into max77693
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v4 1/9] mfd/extcon: max77693: Remove unused extern declarations and max77693_dev members
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v4 2/9] mfd: max77693: Store I2C device type as enum and add default unknown
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v4 5/9] drivers: max77843: Switch to common max77693 state container
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v4 6/9] mfd/extcon: max77693: Rename defines to allow inclusion with max77843
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v4 7/9] mfd/extcon: max77843: Rename defines to allow inclusion with max77693
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v4 8/9] regulator: max77693: Add support for MAX77843 device
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v4 9/9] regulator: Remove the max77843 driver
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• Re: [PATCH] HID: hid-sony: Navigator Axis for L1 button
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• [PATCH v4 4/9] drivers: max77693: Move state container to common header
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v4 3/9] regulator: max77693: Support different register configurations
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• Re: [PATCH v1] HID: cp2112: fix byte order in SMBUS operations
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH v1] HID: cp2112: fix I2C_SMBUS_BYTE write
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH v2] HID: wacom: remove the extra Pen interface for Wacom Bamboo PAD
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH v2] HID: rmi: Write updated F11 control registers after reset
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH v2] usbtouchscreen: adds support for inverting X or Y axis (or both)
  • From: Philippe Coval <philippe.coval@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usbtouchscreen: adds support for inverting X or Y axis (or both)
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• [PATCH v2] usbtouchscreen: adds support for inverting X or Y axis (or both)
  • From: Philippe Coval <rzr@xxxxxxx>
• Re: [PATCH] Add generic driver for Silead tochscreens
  • From: Robert Dolca <robert.dolca@xxxxxxxxx>
• [PATCH] atkbd: add basic debounce support
  • From: Gavin Li <gavinli@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/9] regulator: Merge max77843 into max77693
  • From: Krzysztof Kozłowski <k.kozlowski.k@xxxxxxxxx>
• Re: [PATCH] Add generic driver for Silead tochscreens
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: wdt87xx_i2c - Change the sleep time to 2500ms after the sw reset
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Add generic driver for Silead tochscreens
  • From: Gregor Riepl <onitake@xxxxxxxxx>
• [PATCH] Input: wdt87xx_i2c - Change the sleep time to 2500ms after the sw reset
  • From: HungNien Chen <hn.chen@xxxxxxxxxxxxxxx>
• Re: [PATCH] Add generic driver for Silead tochscreens
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• Re: [PATCH] HID: cp2112: fix to force single data-report reply
  • From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
• [git pull] Input updates for 4.2-rc1
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 6/8] Input: xpad: use bitmask for finding the pad_nr
  • From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
• [PATCH 1/8] Input: xpad: clarify LED enumeration
  • From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
• [PATCH 2/8] Input: xpad: remove bulk out URB
  • From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
• [PATCH 7/8] Input: xpad: factor out URB submission in xpad_play_effect
  • From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
• [PATCH 8/8] Input: xpad: do not submit active URBs
  • From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
• [PATCH 0/8] Input: xpad: fix wireless pad connection and URB out
  • From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
• [PATCH 4/8] Input: xpad: query Wireless controller state at init
  • From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
• [PATCH 3/8] Input: xpad: move the input device creation to a new function
  • From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
• [PATCH 5/8] Input: xpad: handle "present" and "gone" correctly
  • From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
• Re: [PATCH v2] HID: cp2112: support large i2c transfers in hid-cp2112
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] HID: rmi: Write updated F11 control registers after reset
  • From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
• Re: [PATCH resend] input: fix sur40.c dependency/build errors
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH resend] input: fix sur40.c dependency/build errors
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: wdt87xx_i2c - Add a prodcut_id attribute in sysfs
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH resend] input: fix sur40.c dependency/build errors
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• RE: [PATCH] Input: wdt87xx_i2c - Add a prodcut_id attribute in sysfs
  • From: "Hn Chen" <hn.chen@xxxxxxxxxxxxxxx>
• [PATCH] Add generic driver for Silead tochscreens
  • From: Robert Dolca <robert.dolca@xxxxxxxxx>
• Re: [PATCH] Input: wdt87xx_i2c - Add a prodcut_id attribute in sysfs
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• RE: [PATCH] Input: wdt87xx_i2c - Add a prodcut_id attribute in sysfs
  • From: "Hn Chen" <hn.chen@xxxxxxxxxxxxxxx>
• RE: [PATCH] Input: wdt87xx_i2c - Add a prodcut_id attribute in sysfs
  • From: "Hn Chen" <hn.chen@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] HID: cp2112: support large i2c transfers in hid-cp2112
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH] HID: rmi: Write updated F11 control registers after reset
  • From: Gabriele Mazzotta <gabriele.mzt@xxxxxxxxx>
• Re: [PATCH] HID: input: call input_sync() when automatically releasing a key
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• [PATCH] CHROMIUM: elants_i2c.c: Disable idle mode before firmware upgrade procedure.
  • From: "james.chen" <james.chen@xxxxxxxxxx>
• Re: [PATCH v2] HID: cp2112: support i2c write-read transfers in hid-cp2112
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH 2/3] Input: of_touchscreen - fix setting max values on X/Y axis
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v1] HID: cp2112: support i2c write-read transfers in hid-cp2112
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Input - elantech: force a resolution of 31 u/mm
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] HID: hid-sony: Navigator Axis for L1 button
  • From: Simon Wood <simon@xxxxxxxxxxxxx>
• [PATCH] input: Drop owner assignment from i2c_driver
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] hid: Drop owner assignment from i2c_driver
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v1] HID: cp2112: fix I2C_SMBUS_BYTE write
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• [PATCH v1] HID: cp2112: fix byte order in SMBUS operations
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] HID: cp2112: support i2c write-read transfers in hid-cp2112
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• [PATCH] Input - elantech: force a resolution of 31 u/mm
  • From: Peter Hutterer <peter.hutterer@xxxxxxxxx>
• Re: [PATCH] HID: rmi: Write updated F11 control registers after reset
  • From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
• Re: [PATCH] HID: rmi: Write updated F11 control registers after reset
  • From: Gabriele Mazzotta <gabriele.mzt@xxxxxxxxx>
• [PATCH] HID: rmi: Write updated F11 control registers after reset
  • From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
• [PATCH] HID: input: call input_sync() when automatically releasing a key
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: i2c-HID: Delete unnecessary checks before the function call "gpiod_put"
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
• Re: i2c-HID: Delete unnecessary checks before the function call "gpiod_put"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Input: wdt87xx_i2c - Add a prodcut_id attribute in sysfs
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: i2c-HID: Delete unnecessary checks before the function call "gpiod_put"
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
• Re: i2c-HID: Delete unnecessary checks before the function call "gpiod_put"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-HID: Delete unnecessary checks before the function call "gpiod_put"
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
• Re: [PATCH] Input: Use for_each_set_bit where appropriate
  • From: Anshul Garg <aksgarg1989@xxxxxxxxx>
• Re: [PATCH 2/3] Input: of_touchscreen - fix setting max values on X/Y axis
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: Use for_each_set_bit where appropriate
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v2] HID: wacom: remove the extra Pen interface for Wacom Bamboo PAD
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH] Input: wdt87xx_i2c - Add a prodcut_id attribute in sysfs
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: Use for_each_set_bit where appropriate
  • From: Anshul Garg <aksgarg1989@xxxxxxxxx>
• Re: [PATCH] Input: Use for_each_set_bit where appropriate
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] Input: wdt87xx_i2c - Add a prodcut_id attribute in sysfs This prodcut_id can be used by the fw updater to distingush products. Also modify the RETRY number to make sure the correctness of the flash.
  • From: HungNien Chen <hn.chen@xxxxxxxxxxxxxxx>
• [PATCH] Input: Use for_each_set_bit where appropriate
  • From: Anshul Garg <aksgarg1989@xxxxxxxxx>
• Re: [PATCH] i2c-HID: Delete unnecessary checks before the function call "gpiod_put"
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH v2] HID: Wacom: Delete unnecessary checks before the function call "input_free_device"
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH] HID: rmi: Disable scanning if the device is not a wake source
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH v1] HID: cp2112: support i2c write-read transfers in hid-cp2112
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH v3] HID: cp2112: support large i2c transfers in hid-cp2112
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH RFC V1 0/3] da9062: Add DA9062 RTC support using the existing DA9063 RTC driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH RFC V1 0/3] da9062: Add DA9062 RTC support using the existing DA9063 RTC driver
  • From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
• Re: [PATCH 2/3] Input: of_touchscreen - fix setting max values on X/Y axis
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] i2c-HID: Delete unnecessary checks before the function call "gpiod_put"
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH RFC V1 0/3] da9062: Add DA9062 RTC support using the existing DA9063 RTC driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH RFC V1 3/3] devicetree: da9062: Add device tree bindings for DA9062 RTC
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH RFC V1 2/3] rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH RFC V1 0/3] da9062: Add DA9062 RTC support using the existing DA9063 RTC driver
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH RFC V1 1/3] mfd: da9062: Support for the DA9063 RTC in the DA9062 core
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH v2] HID: Wacom: Delete unnecessary checks before the function call "input_free_device"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Input: elan_i2c - Change the hover event from MT to ST
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
• Re: [PATCH] Input: elan_i2c - Change the hover event from MT to ST
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: elan_i2c - Change the hover event from MT to ST
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
• [PATCH] i2c-HID: Delete unnecessary checks before the function call "gpiod_put"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3] HID: cp2112: support large i2c transfers in hid-cp2112
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• [PATCH] Input: Use for_each_set_bit where appropriate
  • From: Anshul Garg <aksgarg1989@xxxxxxxxx>
• Re: [PATCH v2] HID: cp2112: support large i2c transfers in hid-cp2112
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Input: drv260x/drv2665/drv2667 - Constify reg_default tables
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/3] Input: of_touchscreen - fix setting max values on X/Y axis
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2] HID: cp2112: support large i2c transfers in hid-cp2112
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH v3 0/9] regulator: Merge max77843 into max77693
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v3 1/9] mfd/extcon: max77693: Remove unused extern declarations and max77693_dev members
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v3 3/9] regulator: max77693: Support different register configurations
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v3 4/9] extcon/input/mfd/power/regulator: max77693: Move state container to common header
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v3 6/9] mfd/extcon: max77693: Rename defines to allow inclusion with max77843
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v3 5/9] extcon/input/mfd/regulator: max77843: Switch to common max77693 state container
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v3 7/9] mfd/extcon: max77843: Rename defines to allow inclusion with max77693
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v3 8/9] regulator: max77693: Add support for MAX77843 device
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v3 9/9] regulator: Remove the max77843 driver
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH v3 2/9] mfd: max77693: Store I2C device type as enum and add default unknown
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• Re: [PATCH] HID: i2c-hid: Call device suspend callback before disabling irq
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH] HID: cp2112: fix to force single data-report reply
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH v1] HID: cp2112: support i2c write-read transfers in hid-cp2112
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] HID: cp2112: support large i2c transfers in hid-cp2112
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] HID: i2c-hid: Call device suspend callback before disabling irq
  • From: Gabriele Mazzotta <gabriele.mzt@xxxxxxxxx>
• Re: [PATCH] HID: cp2112: fix to force single data-report reply
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] HID: wacom: Enable pad device for older Bamboo Touch tablets
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH v1] HID: cp2112: support i2c write-read transfers in hid-cp2112
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH v2] USB: HID: Fix fields from pen report ID being interpreted for multitouch.
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH] HID: cp2112: fix to force single data-report reply
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH 2/3] Input: of_touchscreen - fix setting max values on X/Y axis
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2] ARM: shmobile: kzm9g dts: Use adxl345-specific compatible property
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH] HID: i2c-hid: Call device suspend callback before disabling irq
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH] HID: i2c-hid: Call device suspend callback before disabling irq
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH] Input/evdev: Add 64bit timestamp support
  • From: Anshul Garg <aksgarg1989@xxxxxxxxx>
• [PATCH] HID: i2c-hid: Call device suspend callback before disabling irq
  • From: Gabriele Mazzotta <gabriele.mzt@xxxxxxxxx>
• Re: [PATCH 2/2] Input: zforce - convert to use the gpiod interface
  • From: Dirk Behme <dirk.behme@xxxxxxxxx>
• Re: [PATCH] Input/evdev: Add 64bit timestamp support
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: elan_i2c - Change the hover event from MT to ST
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/3] Input: of_touchscreen - fix setting max values on X/Y axis
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: hid-rmi: configuration automatically changed after suspend/resume
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH] HID: wacom: remove the extra Pen interface for Wacom Bamboo PAD
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH 2/2] Input - synaptics: pin 3 touches when the firmware reports 3 fingers
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH] Input/evdev: Add 64bit timestamp support
  • From: Anshul Garg <aksgarg1989@xxxxxxxxx>
• RE: [PATCH V5 1/2] mfd: da9062: DA9062 MFD core driver
  • From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
• Re: [PATCH 6/6] Input: pixcir_i2c_ts - use standard OF touchscreen parsing code
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH V5 2/2] devicetree: da9062: Add bindings for DA9062 driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH V5 1/2] mfd: da9062: DA9062 MFD core driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 5/6] Input: pixcir_i2c_ts - simplify input device initialization
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 3/6] Input: pixcir_i2c_ts - allow using with GPIO expanders
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/6] Input: pixcir_i2c_ts - switch the device over to gpiod
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/6] Input: pixcir_i2c_ts - move platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: hid-rmi: configuration automatically changed after suspend/resume
  • From: Gabriele Mazzotta <gabriele.mzt@xxxxxxxxx>
• Re: [PATCH 2/3] Input: of_touchscreen - fix setting max values on X/Y axis
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2] ARM: shmobile: kzm9g dts: Use adxl345-specific compatible property
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH] Input: elan_i2c - Change the hover event from MT to ST
  • From: duson <dusonlin@xxxxxxxxxx>
• [PATCH] Add support for SiS i2c touch driver
  • From: Yuger <yuger_yu@xxxxxxx>
• [PATCH] Input: pmic8xxx-pwrkey - Support shutdown
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• [PATCH] Input: drv260x/drv2665/drv2667 - Constify reg_default tables
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• [PATCH 2/6] Input: pixcir_i2c_ts - switch the device over to gpiod
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 3/6] Input: pixcir_i2c_ts - allow using with GPIO expanders
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 5/6] Input: pixcir_i2c_ts - simplify input device initialization
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 6/6] Input: pixcir_i2c_ts - use standard OF touchscreen parsing code
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 4/6] Input: pixcir_i2c_ts - add RESET gpio
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 1/6] Input: pixcir_i2c_ts - move platform data
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 3/3] Input: of_touchscreen - switch to using device properties
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 2/3] Input: of_touchscreen - fix setting max values on X/Y axis
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 1/3] Input: of_touchscreen - always issue warning if axis is not set up
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2] ARM: shmobile: kzm9g dts: Use adxl345-specific compatible property
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH] HID: rmi: Disable scanning if the device is not a wake source
  • From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
• Re: hid-rmi: configuration automatically changed after suspend/resume
  • From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] Input: zforce - convert to use the gpiod interface
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: Re: [PATCH] HID:multitouch:add driver fo CJTouch MultiTouch
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH] input: misc: bma150: use sign_extend32() for sign extending
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input/evdev: Add 64bit timestamp support
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: arizona-haptic - convert to use managed input devices
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/2] Input: bcm5974 - report ABS_MT_PRESSURE + remove redundant emulation code
  • From: Matt Whitlock <linux@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] Input: bcm5974 - report ABS_MT_PRESSURE + remove redundant emulation code
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH 2/2] Input: bcm5974 - report ABS_MT_PRESSURE + remove redundant emulation code
  • From: Matt Whitlock <linux@xxxxxxxxxxxxxxxxx>
• [PATCH] Input/evdev: Add 64bit timestamp support
  • From: Anshul Garg <aksgarg1989@xxxxxxxxx>
• Re: [PATCH] Input: arizona-haptic - convert to use managed input devices
  • From: Joshua Clayton <stillcompiling@xxxxxxxxx>
• Re: [PATCH 2/2] Input: bcm5974 - report ABS_MT_PRESSURE + remove redundant emulation code
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH 2/2] Input: bcm5974 - report ABS_MT_PRESSURE + remove redundant emulation code
  • From: Matt Whitlock <linux@xxxxxxxxxxxxxxxxx>
• [PATCH] Input: arizona-haptic - convert to use managed input devices
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2] ARM: shmobile: kzm9g dts: Use adxl345-specific compatible property
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2] ARM: shmobile: kzm9g dts: Use adxl345-specific compatible property
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH] ARM: shmobile: kzm9g dts: Add adxl345-specific compatible property
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2] Input: pixcir_i2c_ts - Add RESET gpio
  • From: Roger Quadros <rogerq@xxxxxx>
• hid-rmi: configuration automatically changed after suspend/resume
  • From: Gabriele Mazzotta <gabriele.mzt@xxxxxxxxx>
• Re: [PATCH] ARM: shmobile: kzm9g dts: Add adxl345-specific compatible property
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH] ARM: shmobile: kzm9g dts: Add adxl345-specific compatible property
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH] HID:multitouch:add driver for CJTouch MultiTouch
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
• Re: [PATCH v6 0/2] cap11xx: add LED support
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [RFC_v2 4/4] HID: hid-sony: Add IIO support for DualShock4 Controller
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC_v2 3/4] HID: hid-sony: Add IIO trigger support for SixAxis Controller
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] HID:multitouch:add driver for CJTouch MultiTouch
  • From: linuxsea@xxxxxxx
• Re: [RFC_v2 2/4] HID: hid-sony: Add IIO buffer support for SixAxis Controller
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC_v2 1/4] HID: hid-sony: Add basic IIO support for SixAxis Controller
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [git pull] Input updates for 4.2-rc0 (round 2)
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v4 1/4] i8042: Add i8042_of.h header
  • From: Roman Volkov <rvolkov@xxxxxxxxx>
• [PATCH v4 3/4] i8042: Add OF/FDT support to the driver
  • From: Roman Volkov <rvolkov@xxxxxxxxx>
• [PATCH v4 4/4] Documentation: Add 'intel,8042' FDT bindings
  • From: Roman Volkov <rvolkov@xxxxxxxxx>
• [PATCH v4 2/4] i8042: Kernel configuration for OF/FDT support
  • From: Roman Volkov <rvolkov@xxxxxxxxx>
• [PATCH v4 0/4] FDT support for i8042 driver
  • From: Roman Volkov <rvolkov@xxxxxxxxx>
• Re: [PATCH v1 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH v1 2/4] ARM: dts: vf500-colibri: Add device tree node for touchscreen support
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH v1 1/4] ARM: dts: vfxxx: Add io-channel-cells property for ADC node
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH v5] i8042: Add unmask_kbd_data option
  • From: Andreas Mohr <andi@xxxxxxxx>
• [PATCH 2/2] Input: zforce - convert to use the gpiod interface
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• [PATCH 1/2] Input: zforce - add DT support for reset GPIO polarity
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• [PATCH 0/2] Input: zforce - update GPIO handling
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• [PATCH] input: misc: bma150: use sign_extend32() for sign extending
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• What is a good uart input driver module to start with?
  • From: Joshua Clayton <joshua.clayton@xxxxxxxxxxx>
• Re: [PATCH 02/11] Input: synaptics-rmi4 - add a common input device in rmi_driver
  • From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
• Re: [PATCH 05/11] Input: synaptics-rmi4 - call rmi_driver_process_config_requests in enable_sensor
  • From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
• Re: [PATCH 11/11] Input: synaptics-rmi4 - f11: add support for kernel tracking
  • From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
• Re: [PATCH 09/11] Input: synaptics-rmi4 - f11: clean up rmi_f11_finger_handler
  • From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
• Re: [PATCH 10/11] Input: synaptics-rmi4 - f11: allow the top software button property to be set
  • From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
• Re: [PATCH 08/11] Input: synaptics-rmi4 - f11: use the unified input node if available
  • From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
• Re: [PATCH 07/11] Input: synaptics-rmi4 - f11: fix bitmap irq check
  • From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
• Re: [PATCH 03/11] Input: synaptics-rmi4 - explicitly request polling when needed
  • From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
• Re: [PATCH 04/11] Input: synaptics-rmi4 - prevent oopses when irq arrives while the device is not bound
  • From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
• Re: [PATCH 01/11] Input: synaptics-rmi4 - embed the function modules in rmi_core
  • From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
• Re: Bug#514464: caps lock led does not show up
  • From: Anton Zinoviev <anton@xxxxxxxxxx>
• Re: Bug#514464: caps lock led does not show up
  • From: Samuel Thibault <sthibault@xxxxxxxxxx>
• [PATCH v5] i8042: Add unmask_kbd_data option
  • From: cpaul@xxxxxxxxxx
• [PATCH] sensor-hub: Add in quirk for Lenovo Yogas with ITE
  • From: Guilhem Lettron <guilhem@xxxxxxxxxx>
• RE: [PATCH] Input: wdt87xx_i2c - Add a scaling factor for TOUCH_MAJOR event
  • From: "Hn Chen" <hn.chen@xxxxxxxxxxxxxxx>
• [PATCH] HID: wacom: Enable pad device for older Bamboo Touch tablets
  • From: Jason Gerecke <killertofu@xxxxxxxxx>
• Re: [PATCH] Input: wdt87xx_i2c - Add a scaling factor for TOUCH_MAJOR event
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH V5 0/2] da9062: DA9062 driver submission
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH V5 2/2] devicetree: da9062: Add bindings for DA9062 driver
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH V5 1/2] mfd: da9062: DA9062 MFD core driver
  • From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH] Input: wdt87xx_i2c - Add a scaling factor for TOUCH_MAJOR event
  • From: HungNien Chen <hn.chen@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] HID: cp2112: support i2c write-read transfers in hid-cp2112
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] HID: cp2112: fix to force single data-report reply
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 1/4] mfd: da9062: DA9062 MFD core driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v1] HID: cp2112: support large i2c transfers in hid-cp2112
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] Input - synaptics: pin 3 touches when the firmware reports 3 fingers
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] Input: wdt87xx_i2c - remove stray newline in diagnostic message
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCHv7 04/15] HID: add HDMI CEC specific keycodes
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 1/5] Input: goodix - reset device at init
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [PATCH v3 3/5] Input: goodix - add power management support
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] HID:multitouch:add driver fo CJTouch MultiTouch
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCHv7 04/15] HID: add HDMI CEC specific keycodes
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH v1 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v1 2/4] ARM: dts: vf500-colibri: Add device tree node for touchscreen support
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v1 4/4] input: Add DT binding documentation for Colibri VF50 touchscreen
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v1 1/4] ARM: dts: vfxxx: Add io-channel-cells property for ADC node
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v1 0/4] Add support for touchscreen on Colibri VF50
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• Re: [PATCH] input: zforce_ts: add DT support for reset GPIO polarity
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• Re: [PATCH] input: zforce_ts: add DT support for reset GPIO polarity
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2] Input :Optimize input_dev_release_keys function
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: elan_i2c - Add hover event for ST format
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCHv7 04/15] HID: add HDMI CEC specific keycodes
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCHv7 05/15] input.h: add BUS_CEC type
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] input/arc_ps2: add HAS_IOMEM dependency
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] HID:multitouch:add driver fo CJTouch MultiTouch
  • From: linuxsea@xxxxxxx
• [PATCH v3 3/5] Input: goodix - add power management support
  • From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
• [PATCH v3 1/5] Input: goodix - reset device at init
  • From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
• [PATCH v3 0/5] Goodix touchscreen enhancements
  • From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
• [PATCH v3 4/5] Input: goodix - use goodix_i2c_write_u8 instead of i2c_master_send
  • From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
• [PATCH v3 5/5] Input: goodix - add support for ESD
  • From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
• [PATCH v3 2/5] Input: goodix - write configuration data to device
  • From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
• RE: [PATCH v2 4/8] input: goodix: reset device at init
  • From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
• RE: [PATCH v2 5/8] input: goodix: write configuration data to device
  • From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
• Re: [PATCH v2] HID: microsoft: Add quirk for MS Surface Type/Touch cover
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH] HID: wacom: remove the extra Pen interface for Wacom Bamboo PAD
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH] HID-picoLCD: Deletion of unnecessary checks before three function calls
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
  • From: Jiri Kosina <jkosina@xxxxxxxx>
• Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
  • From: Jiri Kosina <jkosina@xxxxxxx>
• [PATCH 0/4] cec-ctl/compliance: new CEC utilities
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH 4/4] cec-ctl: CEC control utility
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH 3/4] cec-compliance: add new CEC compliance utility
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH 2/4] sync-with-kernel
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH 1/4] Makefile.am: copy cec headers with make sync-with-kernel
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv7 09/15] DocBook/media: add CEC documentation
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 12/15] adv7842: add cec support
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 13/15] cec: adv7511: add cec support.
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 14/15] cec: s5p-cec: Add s5p-cec driver
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 10/15] v4l2-subdev: add HDMI CEC ops
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 15/15] cobalt: add cec support
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 05/15] input.h: add BUS_CEC type
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 11/15] cec: adv7604: add cec support.
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 08/15] cec.txt: add CEC framework documentation
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 04/15] HID: add HDMI CEC specific keycodes
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>