Linux Input
[Prev Page][Next Page]
- Re: [PATCH] Input/evdev: Add 64bit timestamp support
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] Input: arizona-haptic - convert to use managed input devices
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 2/2] Input: bcm5974 - report ABS_MT_PRESSURE + remove redundant emulation code
- From: Matt Whitlock <linux@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] Input: bcm5974 - report ABS_MT_PRESSURE + remove redundant emulation code
- From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
- Re: [PATCH 2/2] Input: bcm5974 - report ABS_MT_PRESSURE + remove redundant emulation code
- From: Matt Whitlock <linux@xxxxxxxxxxxxxxxxx>
- [PATCH] Input/evdev: Add 64bit timestamp support
- From: Anshul Garg <aksgarg1989@xxxxxxxxx>
- Re: [PATCH] Input: arizona-haptic - convert to use managed input devices
- From: Joshua Clayton <stillcompiling@xxxxxxxxx>
- Re: [PATCH 2/2] Input: bcm5974 - report ABS_MT_PRESSURE + remove redundant emulation code
- From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
- Re: [PATCH 2/2] Input: bcm5974 - report ABS_MT_PRESSURE + remove redundant emulation code
- From: Matt Whitlock <linux@xxxxxxxxxxxxxxxxx>
- [PATCH] Input: arizona-haptic - convert to use managed input devices
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2] ARM: shmobile: kzm9g dts: Use adxl345-specific compatible property
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v2] ARM: shmobile: kzm9g dts: Use adxl345-specific compatible property
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- Re: [PATCH] ARM: shmobile: kzm9g dts: Add adxl345-specific compatible property
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v2] Input: pixcir_i2c_ts - Add RESET gpio
- From: Roger Quadros <rogerq@xxxxxx>
- hid-rmi: configuration automatically changed after suspend/resume
- From: Gabriele Mazzotta <gabriele.mzt@xxxxxxxxx>
- Re: [PATCH] ARM: shmobile: kzm9g dts: Add adxl345-specific compatible property
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH] ARM: shmobile: kzm9g dts: Add adxl345-specific compatible property
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- Re: [PATCH] HID:multitouch:add driver for CJTouch MultiTouch
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
- Re: [PATCH v6 0/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [RFC_v2 4/4] HID: hid-sony: Add IIO support for DualShock4 Controller
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC_v2 3/4] HID: hid-sony: Add IIO trigger support for SixAxis Controller
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] HID:multitouch:add driver for CJTouch MultiTouch
- Re: [RFC_v2 2/4] HID: hid-sony: Add IIO buffer support for SixAxis Controller
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC_v2 1/4] HID: hid-sony: Add basic IIO support for SixAxis Controller
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [git pull] Input updates for 4.2-rc0 (round 2)
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH v4 1/4] i8042: Add i8042_of.h header
- From: Roman Volkov <rvolkov@xxxxxxxxx>
- [PATCH v4 3/4] i8042: Add OF/FDT support to the driver
- From: Roman Volkov <rvolkov@xxxxxxxxx>
- [PATCH v4 4/4] Documentation: Add 'intel,8042' FDT bindings
- From: Roman Volkov <rvolkov@xxxxxxxxx>
- [PATCH v4 2/4] i8042: Kernel configuration for OF/FDT support
- From: Roman Volkov <rvolkov@xxxxxxxxx>
- [PATCH v4 0/4] FDT support for i8042 driver
- From: Roman Volkov <rvolkov@xxxxxxxxx>
- Re: [PATCH v1 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH v1 2/4] ARM: dts: vf500-colibri: Add device tree node for touchscreen support
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH v1 1/4] ARM: dts: vfxxx: Add io-channel-cells property for ADC node
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH v5] i8042: Add unmask_kbd_data option
- From: Andreas Mohr <andi@xxxxxxxx>
- [PATCH 2/2] Input: zforce - convert to use the gpiod interface
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- [PATCH 1/2] Input: zforce - add DT support for reset GPIO polarity
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- [PATCH 0/2] Input: zforce - update GPIO handling
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- [PATCH] input: misc: bma150: use sign_extend32() for sign extending
- From: Martin Kepplinger <martink@xxxxxxxxx>
- What is a good uart input driver module to start with?
- From: Joshua Clayton <joshua.clayton@xxxxxxxxxxx>
- Re: [PATCH 02/11] Input: synaptics-rmi4 - add a common input device in rmi_driver
- From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
- Re: [PATCH 05/11] Input: synaptics-rmi4 - call rmi_driver_process_config_requests in enable_sensor
- From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
- Re: [PATCH 11/11] Input: synaptics-rmi4 - f11: add support for kernel tracking
- From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
- Re: [PATCH 09/11] Input: synaptics-rmi4 - f11: clean up rmi_f11_finger_handler
- From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
- Re: [PATCH 10/11] Input: synaptics-rmi4 - f11: allow the top software button property to be set
- From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
- Re: [PATCH 08/11] Input: synaptics-rmi4 - f11: use the unified input node if available
- From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
- Re: [PATCH 07/11] Input: synaptics-rmi4 - f11: fix bitmap irq check
- From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
- Re: [PATCH 03/11] Input: synaptics-rmi4 - explicitly request polling when needed
- From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
- Re: [PATCH 04/11] Input: synaptics-rmi4 - prevent oopses when irq arrives while the device is not bound
- From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
- Re: [PATCH 01/11] Input: synaptics-rmi4 - embed the function modules in rmi_core
- From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
- Re: Bug#514464: caps lock led does not show up
- From: Anton Zinoviev <anton@xxxxxxxxxx>
- Re: Bug#514464: caps lock led does not show up
- From: Samuel Thibault <sthibault@xxxxxxxxxx>
- [PATCH v5] i8042: Add unmask_kbd_data option
- [PATCH] sensor-hub: Add in quirk for Lenovo Yogas with ITE
- From: Guilhem Lettron <guilhem@xxxxxxxxxx>
- RE: [PATCH] Input: wdt87xx_i2c - Add a scaling factor for TOUCH_MAJOR event
- From: "Hn Chen" <hn.chen@xxxxxxxxxxxxxxx>
- [PATCH] HID: wacom: Enable pad device for older Bamboo Touch tablets
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- Re: [PATCH] Input: wdt87xx_i2c - Add a scaling factor for TOUCH_MAJOR event
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH V5 0/2] da9062: DA9062 driver submission
- From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
- [PATCH V5 2/2] devicetree: da9062: Add bindings for DA9062 driver
- From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
- [PATCH V5 1/2] mfd: da9062: DA9062 MFD core driver
- From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
- [PATCH] Input: wdt87xx_i2c - Add a scaling factor for TOUCH_MAJOR event
- From: HungNien Chen <hn.chen@xxxxxxxxxxxxxxx>
- Re: [PATCH v1] HID: cp2112: support i2c write-read transfers in hid-cp2112
- From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] HID: cp2112: fix to force single data-report reply
- From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH V3 1/4] mfd: da9062: DA9062 MFD core driver
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v1] HID: cp2112: support large i2c transfers in hid-cp2112
- From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] Input - synaptics: pin 3 touches when the firmware reports 3 fingers
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH] Input: wdt87xx_i2c - remove stray newline in diagnostic message
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCHv7 04/15] HID: add HDMI CEC specific keycodes
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v3 1/5] Input: goodix - reset device at init
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- Re: [PATCH v3 3/5] Input: goodix - add power management support
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] HID:multitouch:add driver fo CJTouch MultiTouch
- From: Jiri Kosina <jkosina@xxxxxxxx>
- Re: [PATCHv7 04/15] HID: add HDMI CEC specific keycodes
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [PATCH v1 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50
- From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
- [PATCH v1 2/4] ARM: dts: vf500-colibri: Add device tree node for touchscreen support
- From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
- [PATCH v1 4/4] input: Add DT binding documentation for Colibri VF50 touchscreen
- From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
- [PATCH v1 1/4] ARM: dts: vfxxx: Add io-channel-cells property for ADC node
- From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
- [PATCH v1 0/4] Add support for touchscreen on Colibri VF50
- From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
- Re: [PATCH] input: zforce_ts: add DT support for reset GPIO polarity
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- Re: [PATCH] input: zforce_ts: add DT support for reset GPIO polarity
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2] Input :Optimize input_dev_release_keys function
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] Input: elan_i2c - Add hover event for ST format
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCHv7 04/15] HID: add HDMI CEC specific keycodes
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCHv7 05/15] input.h: add BUS_CEC type
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] input/arc_ps2: add HAS_IOMEM dependency
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH] HID:multitouch:add driver fo CJTouch MultiTouch
- [PATCH v3 3/5] Input: goodix - add power management support
- From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
- [PATCH v3 1/5] Input: goodix - reset device at init
- From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
- [PATCH v3 0/5] Goodix touchscreen enhancements
- From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
- [PATCH v3 4/5] Input: goodix - use goodix_i2c_write_u8 instead of i2c_master_send
- From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
- [PATCH v3 5/5] Input: goodix - add support for ESD
- From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
- [PATCH v3 2/5] Input: goodix - write configuration data to device
- From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
- RE: [PATCH v2 4/8] input: goodix: reset device at init
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- RE: [PATCH v2 5/8] input: goodix: write configuration data to device
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- Re: [PATCH v2] HID: microsoft: Add quirk for MS Surface Type/Touch cover
- From: Jiri Kosina <jkosina@xxxxxxxx>
- Re: [PATCH] HID: wacom: remove the extra Pen interface for Wacom Bamboo PAD
- From: Jiri Kosina <jkosina@xxxxxxxx>
- Re: [PATCH] HID-picoLCD: Deletion of unnecessary checks before three function calls
- From: Jiri Kosina <jkosina@xxxxxxxx>
- Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
- From: Jiri Kosina <jkosina@xxxxxxxx>
- Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
- From: Jiri Kosina <jkosina@xxxxxxx>
- [PATCH 0/4] cec-ctl/compliance: new CEC utilities
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [PATCH 4/4] cec-ctl: CEC control utility
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [PATCH 3/4] cec-compliance: add new CEC compliance utility
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [PATCH 2/4] sync-with-kernel
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [PATCH 1/4] Makefile.am: copy cec headers with make sync-with-kernel
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [PATCHv7 09/15] DocBook/media: add CEC documentation
- From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
- [PATCHv7 12/15] adv7842: add cec support
- From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
- [PATCHv7 13/15] cec: adv7511: add cec support.
- From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
- [PATCHv7 14/15] cec: s5p-cec: Add s5p-cec driver
- From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
- [PATCHv7 10/15] v4l2-subdev: add HDMI CEC ops
- From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
- [PATCHv7 15/15] cobalt: add cec support
- From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
- [PATCHv7 05/15] input.h: add BUS_CEC type
- From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
- [PATCHv7 11/15] cec: adv7604: add cec support.
- From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
- [PATCHv7 08/15] cec.txt: add CEC framework documentation
- From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
- [PATCHv7 04/15] HID: add HDMI CEC specific keycodes
- From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
- [PATCHv7 00/15] HDMI CEC framework
- From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
- [PATCHv7 01/15] dts: exynos4*: add HDMI CEC pin definition to pinctrl
- From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
- [PATCHv7 03/15] dts: exynos4412-odroid*: enable the HDMI CEC device
- From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
- [PATCHv7 06/15] rc: Add HDMI CEC protocol handling
- From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
- [PATCHv7 02/15] dts: exynos4: add node for the HDMI CEC device
- From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
- Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
- From: Oliver Neukum <oneukum@xxxxxxxx>
- [PATCH] input/arc_ps2: add HAS_IOMEM dependency
- From: Sebastian Ott <sebott@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 0/6] Change snvs rtc and poweroff to use syscon add pwrkey driver
- From: Shawn Guo <shawnguo@xxxxxxxxxx>
- Re: [rtc-linux] [PATCH v5 1/6] rtc: arm: imx: snvs: change use syscon to access register
- From: Shawn Guo <shawnguo@xxxxxxxxxx>
- RE: [PATCH V3 1/4] mfd: da9062: DA9062 MFD core driver
- From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
- Re: [PATCH] HID-picoLCD: Deletion of unnecessary checks before three function calls
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- [PATCH] Input: elan_i2c - Add hover event for ST format
- From: duson <dusonlin@xxxxxxxxxx>
- [PATCH v2] HID: microsoft: Add quirk for MS Surface Type/Touch cover
- From: Reyad Attiyat <reyad.attiyat@xxxxxxxxx>
- Re: [PATCH] HID: microsoft: Add quirk for MS Surface Type/Touch cover
- From: Reyad Attiyat <reyad.attiyat@xxxxxxxxx>
- [PATCH 1/2] Input: xpad: clarify pad nr handling
- From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
- [PATCH 2/2] Input: xpad: remove bulk out URB
- From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
- [PATCH 0/2] Input: xpad: clean up x360 LED handling
- From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
- Re: [PATCH] HID-picoLCD: Deletion of unnecessary checks before three function calls
- From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4] i8042: Add debug_kbd option
- From: Andreas Mohr <andi@xxxxxxxx>
- Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v4] i8042: Add debug_kbd option
- Re: [PATCH v3] i8042: Add debug_kbd option
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v3] i8042: Add debug_kbd option
- From: Stephen Chandler Paul <cpaul@xxxxxxxxxx>
- Re: [PATCH v3] i8042: Add debug_kbd option
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH v3] i8042: Add debug_kbd option
- Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH][RFC] usbhid: enable autosuspend for internal devices
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2] i8042: Add debug_kbd option
- [PATCH][RFC] usbhid: enable autosuspend for internal devices
- From: Tom Gundersen <teg@xxxxxxx>
- Re: [patch] HID: wacom: NULL dereferences on error in probe()
- From: Jiri Kosina <jkosina@xxxxxxx>
- [PATCH] HID: microsoft: Add quirk for MS Surface Type/Touch cover
- From: Reyad Attiyat <reyad.attiyat@xxxxxxxxx>
- [PATCH v2 1/1] cap11xx: add runtime PM support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v2 0/1] cap11xx: add runtime PM support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- RE: [PATCH v1 0/7] input: cyapa: instruction of cyapa patches.patch
- From: Dudley Du <dudl@xxxxxxxxxxx>
- Re: [PATCH] i8042: Add debug_kbd option
- From: Stephen Chandler Paul <cpaul@xxxxxxxxxx>
- Re: Re: Windows Precision Touchpad support
- From: Mario Limonciello <mario_limonciello@xxxxxxxx>
- Re: [PATCH] i8042: Add debug_kbd option
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] i8042: Add debug_kbd option
- From: Stephen Chandler Paul <cpaul@xxxxxxxxxx>
- Re: [patch] HID: wacom: NULL dereferences on error in probe()
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- Re: [PATCH] i8042: Add debug_kbd option
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] i8042: Add debug_kbd option
- From: Joe Perches <joe@xxxxxxxxxxx>
- [PATCH] i8042: Add debug_kbd option
- [PATCH v2] Input :Optimize input_dev_release_keys function
- From: Anshul Garg <aksgarg1989@xxxxxxxxx>
- Re: [PATCH] cap11xx: add runtime PM support
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: Bug#514464: caps lock led does not show up
- From: Samuel Thibault <sthibault@xxxxxxxxxx>
- [PATCH] cap11xx: add runtime PM support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH] cap11xx: add runtime PM support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: Fwd: adxl345 patches
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Fwd: adxl345 patches
- From: Eric Fargas Espín <efargaspro@xxxxxxxxx>
- [git pull] Input updates for 4.2-rc0
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [linux-sunxi] Re: [PATCH] input: axp20x-pek: Fix reporting button state as inverted
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [RFC_v2 1/4] HID: hid-sony: Add basic IIO support for SixAxis Controller
- From: simon@xxxxxxxxxxxxx
- Re: [RFC_v2 0/4] HID: hid-sony: Add IIO Suport for Motion Controllers
- From: simon@xxxxxxxxxxxxx
- Re: [RFC_v2 1/4] HID: hid-sony: Add basic IIO support for SixAxis Controller
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [patch] HID: wacom: NULL dereferences on error in probe()
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH 01/11] Input: synaptics-rmi4 - embed the function modules in rmi_core
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- Re: [PATCH 01/11] Input: synaptics-rmi4 - embed the function modules in rmi_core
- From: Paul Bolle <pebolle@xxxxxxxxxx>
- Re: [linux-sunxi] Re: [PATCH] input: axp20x-pek: Fix reporting button state as inverted
- From: Carlo Caione <carlo@xxxxxxxxxx>
- Re: [RFC_v2 1/4] HID: hid-sony: Add basic IIO support for SixAxis Controller
- From: Antonio Ospite <ao2@xxxxxx>
- Re: [RFC_v2 0/4] HID: hid-sony: Add IIO Suport for Motion Controllers
- From: Antonio Ospite <ao2@xxxxxx>
- Re: [PATCH v5 1/2] dt: add cap11xx LED documentation
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [PATCH] touchscreen: sun4i-ts: Really fix A10 temperature reporting
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH] touchscreen: sun4i-ts: Really fix A10 temperature reporting
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 1/2] dt: add cap11xx LED documentation
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [PATCH] touchscreen: sun4i-ts: Really fix A10 temperature reporting
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v6 1/2] dt: add cap11xx LED documentation
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v6 2/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v6 0/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH] input: zforce_ts: add DT support for reset GPIO polarity
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- Re: [linux-sunxi] Re: [PATCH] input: axp20x-pek: Fix reporting button state as inverted
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [RFC_v2 4/4] HID: hid-sony: Add IIO support for DualShock4 Controller
- From: Simon Wood <simon@xxxxxxxxxxxxx>
- [RFC_v2 3/4] HID: hid-sony: Add IIO trigger support for SixAxis Controller
- From: Simon Wood <simon@xxxxxxxxxxxxx>
- [RFC_v2 1/4] HID: hid-sony: Add basic IIO support for SixAxis Controller
- From: Simon Wood <simon@xxxxxxxxxxxxx>
- [RFC_v2 2/4] HID: hid-sony: Add IIO buffer support for SixAxis Controller
- From: Simon Wood <simon@xxxxxxxxxxxxx>
- [RFC_v2 0/4] HID: hid-sony: Add IIO Suport for Motion Controllers
- From: Simon Wood <simon@xxxxxxxxxxxxx>
- Re: [PATCH] touchscreen: sun4i-ts: Really fix A10 temperature reporting
- From: m.silentcreek@xxxxxxxxx
- Re: [PATCH] touchscreen: sun4i-ts: Really fix A10 temperature reporting
- From: m.silentcreek@xxxxxxxxx
- Re: [PATCH] touchscreen: sun4i-ts: Really fix A10 temperature reporting
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] touchscreen: sun4i-ts: Really fix A10 temperature reporting
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH] Input :Optimize input_dev_release_keys function
- From: Anshul Garg <aksgarg1989@xxxxxxxxx>
- [PATCH] Input :Optimize input_dev_release_keys function
- From: Anshul Garg <aksgarg1989@xxxxxxxxx>
- [PATCH 01/11] Input: synaptics-rmi4 - embed the function modules in rmi_core
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- [PATCH 02/11] Input: synaptics-rmi4 - add a common input device in rmi_driver
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- [PATCH 09/11] Input: synaptics-rmi4 - f11: clean up rmi_f11_finger_handler
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- [PATCH 03/11] Input: synaptics-rmi4 - explicitly request polling when needed
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- [PATCH 04/11] Input: synaptics-rmi4 - prevent oopses when irq arrives while the device is not bound
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- [PATCH 05/11] Input: synaptics-rmi4 - call rmi_driver_process_config_requests in enable_sensor
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- [PATCH 08/11] Input: synaptics-rmi4 - f11: use the unified input node if available
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- [PATCH 11/11] Input: synaptics-rmi4 - f11: add support for kernel tracking
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- [PATCH 10/11] Input: synaptics-rmi4 - f11: allow the top software button property to be set
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- [PATCH 07/11] Input: synaptics-rmi4 - f11: fix bitmap irq check
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- [PATCH 06/11] Input: synaptics-rmi4 - add a reset callback
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- [PATCH 00/11] Input: synaptics-rmi4: various fixes for the existing rmi4 branch
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- Re: [PATCH v2 5/8] input: goodix: write configuration data to device
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] Input :Optimize input_dev_release_keys function
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v5 1/2] dt: add cap11xx LED documentation
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v5 1/2] dt: add cap11xx LED documentation
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH] Input :Optimize input_dev_release_keys function
- From: Anshul Garg <aksgarg1989@xxxxxxxxx>
- Re: [PATCH v5 1/2] dt: add cap11xx LED documentation
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v5 1/2] dt: add cap11xx LED documentation
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH] touchscreen: sun4i-ts: Really fix A10 temperature reporting
- From: m.silentcreek@xxxxxxxxx
- Re: [PATCH v2 4/8] input: goodix: reset device at init
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH v2 4/8] input: goodix: reset device at init
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- RE: [PATCH v2 6/8] input: goodix: add power management support
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- RE: [PATCH v2 5/8] input: goodix: write configuration data to device
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- RE: [PATCH v2 4/8] input: goodix: reset device at init
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- RE: [PATCH v2 4/8] input: goodix: reset device at init
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- RE: [PATCH v2 0/8] Goodix touchscreen enhancements
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- Re: [PATCH v5 1/2] dt: add cap11xx LED documentation
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [PATCH v5 2/2] cap11xx: add LED support
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [PATCH] pcf8574_keypad: use request_devm_threaded_irq
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- Re: [PATCH] Input: elan_i2c - enable ELAN0600 acpi panels
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] input: axp20x-pek: Fix reporting button state as inverted
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2 0/2] Input: xpad: fix 360 wireless controller blinking LEDs
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] pcf8574_keypad: use request_devm_threaded_irq
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v5 2/2] cap11xx: add LED support
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v5 1/2] dt: add cap11xx LED documentation
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] Input: imx_keypad - check for clk_prepare_enable() error
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH] Input: imx_keypad - check for clk_prepare_enable() error
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [RFC] HID: hid-sony: Add basic iio-subsystem reading of SixAxis Accelerometers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC] HID: hid-sony: Add basic iio-subsystem reading of SixAxis Accelerometers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1] HID: cp2112: support large i2c transfers in hid-cp2112
- From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
- [PATCH] HID: cp2112: fix to force single data-report reply
- From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
- Re: [PATCH v1] HID: cp2112: support i2c write-read transfers in hid-cp2112
- From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
- Re: [PATCH v1] HID: cp2112: support large i2c transfers in hid-cp2112
- From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
- Re: [PATCH v5 2/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- RE: [PATCH v2] USB: HID: Fix fields from pen report ID being interpreted for multitouch.
- From: Brent Adam <BrentAdam@xxxxxxxxxxxxx>
- [PATCH v2] USB: HID: Fix fields from pen report ID being interpreted for multitouch.
- From: Brent Adam <brentadamdev@xxxxxxxxx>
- Re: [PATCH] HID: wacom: remove the extra Pen interface for Wacom Bamboo PAD
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- [PATCH] pcf8574_keypad: use request_devm_threaded_irq
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH] HID: wacom: remove the extra Pen interface for Wacom Bamboo PAD
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- [PATCH v1] HID: cp2112: support i2c write-read transfers in hid-cp2112
- From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] HID: roccat: Removing all modules except Kone
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH 1/1 linux-next] HID: use swap() in cp_report_fixup()
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH] input: adding Surface Power Cover
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH 1/3] HID: hid-sony: Add BT support for Navigation Controller
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH v2] HID: support i2c write-read and large transfers in hid-cp2112
- From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] HID: wacom: Simplify 'wacom_update_name'
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH v2] Input: Add generic driver for Zeitec touchscreens
- From: Bogdan George Stefan <bogdan.george.stefan@xxxxxxxxx>
- Re: [PATCH v2] HID: support i2c write-read and large transfers in hid-cp2112
- From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
- Re: [PATCH v2] HID: support i2c write-read and large transfers in hid-cp2112
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2] HID: support i2c write-read and large transfers in hid-cp2112
- From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
- Re: [PATCH v5 2/2] cap11xx: add LED support
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [PATCH v5 1/2] dt: add cap11xx LED documentation
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [RFC] HID: hid-sony: Add basic iio-subsystem reading of SixAxis Accelerometers
- From: simon@xxxxxxxxxxxxx
- [PATCH v5 2/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v5 1/2] dt: add cap11xx LED documentation
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v5 0/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v2] HID: support i2c write-read and large transfers in hid-cp2112
- From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
- [PATCH v1] HID: cp2112: support large i2c transfers in hid-cp2112
- From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v4 2/2] cap11xx: add LED support
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v1 0/7] instruction of cyapa gen6 and proximity patches
- From: Jeremiah Mahler <jmmahler@xxxxxxxxx>
- Re: [PATCH v4 2/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v4 2/2] cap11xx: add LED support
- From: Daniel Mack <daniel@xxxxxxxxxx>
- Re: [PATCH v4 2/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v4 2/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH 2/3] HID: hid-sony: Navigation controller only has 1 LED and no rumble
- From: Simon Wood <simon@xxxxxxxxxxxxx>
- [PATCH 3/3] HID: hid-sony: Fix report descriptor for Navigation Controller
- From: Simon Wood <simon@xxxxxxxxxxxxx>
- [PATCH 1/3] HID: hid-sony: Add BT support for Navigation Controller
- From: Simon Wood <simon@xxxxxxxxxxxxx>
- [PATCH v3 11/18] drivers/input/gameport: Replace rdtscl() with native_read_tsc()
- From: Andy Lutomirski <luto@xxxxxxxxxx>
- [PATCH v3 10/18] input/joystick/analog: Switch from rdtscl() to native_read_tsc()
- From: Andy Lutomirski <luto@xxxxxxxxxx>
- Re: [PATCH] input: improve usage of gpiod API
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] input: zforce_ts: add DT support for reset GPIO polarity
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2 10/17] input/joystick/analog: Switch from rdtscl() to native_read_tsc()
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2 10/17] input/joystick/analog: Switch from rdtscl() to native_read_tsc()
- From: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
- Re: [PATCH v2 11/17] drivers/input/gameport: Replace rdtscl() with native_read_tsc()
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2 10/17] input/joystick/analog: Switch from rdtscl() to native_read_tsc()
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [input:next 1215/1216] drivers/tty/vt/keyboard.c:994:2: warning: (near initialization for 'kbd_led_triggers[0].trigger')
- From: Samuel Thibault <samuel.thibault@xxxxxxxxxxxx>
- Re: [PATCH] Input: pixcir_i2c_ts - fix receive error
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [input:next 1215/1216] drivers/tty/vt/keyboard.c:994:2: warning: (near initialization for 'kbd_led_triggers[0].trigger')
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- RE: [RESEND PATCH v2 1/2] HID: hid-plantronics: Update to map volume up/down controls
- From: "Junge, Terry" <Terry.Junge@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH] HID: rmi: Disable populating F30 when the touchpad has physical buttons
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH] HID: rmi: Disable populating F30 when the touchpad has physical buttons
- From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
- Re: [PATCH] HID: rmi: Disable populating F30 when the touchpad has physical buttons
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- Re: [PATCH v4 2/2] cap11xx: add LED support
- From: Daniel Mack <daniel@xxxxxxxxxx>
- [PATCH] HID: rmi: Disable populating F30 when the touchpad has physical buttons
- From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
- [input:next 1215/1216] drivers/tty/vt/keyboard.c:994:2: warning: (near initialization for 'kbd_led_triggers[0].trigger')
- From: kbuild test robot <fengguang.wu@xxxxxxxxx>
- [PATCH] Input: pixcir_i2c_ts - fix receive error
- From: Frodo Lai <frodo.lai@xxxxxxxxx>
- Re: [PATCH v3 1/2] DT: Documentation: input: rotary encoder: Add wakeup-source property
- From: Sylvain Rochet <sylvain.rochet@xxxxxxxxxxxx>
- Re: [PATCH v4 2/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v4 1/2] dt: add cap11xx LED documentation
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v4 1/2] dt: add cap11xx LED documentation
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [PATCH v4 2/2] cap11xx: add LED support
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [Asus UX303LN] F9 disable/enable Touchpad doesn't produce evdev event Edit
- From: Grateful Frog <gratefulfrog@xxxxxxxxx>
- Re: [PATCH v6 00/11] CEC update
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH v6 00/11]
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [Asus UX303LN] F9 disable/enable Touchpad doesn't produce evdev event Edit
- From: Martin Herkt <lachs0r@xxxxxxxxxxx>
- [PATCH v4 2/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v4 1/2] dt: add cap11xx LED documentation
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v4 0/2] cap118x: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v2 5/5] HID: wacom: Introduce new 'touch_input' device
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- [PATCH v2 4/5] HID: wacom: Split apart 'wacom_setup_pentouch_input_capabilites'
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- [PATCH v2 3/5] HID: wacom: Introduce a new WACOM_DEVICETYPE_PAD device_type
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- [PATCH v2 2/5] HID: wacom: Treat features->device_type values as flags
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- [PATCH v2 1/5] HID: wacom: Simplify 'wacom_update_name'
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- [Asus UX303LN] F9 disable/enable Touchpad doesn't produce evdev event Edit
- From: Grateful Frog <gratefulfrog@xxxxxxxxx>
- Re: [PATCH] input: improve usage of gpiod API
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [RFC] HID: hid-sony: Add basic iio-subsystem reading of SixAxis Accelerometers
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v3 2/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v3 1/2] dt: add cap11xx LED documentation
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: [PATCH v3 2/2] cap11xx: add LED support
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt: add cap11xx LED documentation
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
- From: Pavel Machek <pavel@xxxxxx>
- [PATCH v1 6/7] input: cyapa: add of match device support and description document
- From: Dudley Du <dudl@xxxxxxxxxxx>
- [PATCH v1 1/7] input: cyapa: change strings of gen5 to pip in the name when they are shared
- From: Dudley Du <dudl@xxxxxxxxxxx>
- Re: [PATCH v2] HID: support i2c write-read and large transfers in hid-cp2112
- From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
- [PATCH v1 5/7] input: cyapa: add proximity and interrupt sysfs interfaces support
- From: Dudley Du <dudl@xxxxxxxxxxx>
- [PATCH v1 7/7] input: cyapa: add CYAP0002 Gen6 device for ACPI configuration
- From: Dudley Du <dudl@xxxxxxxxxxx>
- [PATCH v1 2/7] input: cyapa: add gen6 device module support in driver
- From: Dudley Du <dudl@xxxxxxxxxxx>
- [PATCH v1 0/7] instruction of cyapa gen6 and proximity patches
- From: Dudley Du <dudl@xxxxxxxxxxx>
- [PATCH v1 4/7] input: cyapa: fully support runtime suspend power management
- From: Dudley Du <dudl@xxxxxxxxxxx>
- [PATCH v1 3/7] input: cyapa: add proximity function support for gen5 and gen6 modules
- From: Dudley Du <dudl@xxxxxxxxxxx>
- Re: [PATCH v3 2/2] cap11xx: add LED support
- From: Daniel Mack <daniel@xxxxxxxxxx>
- Re: [PATCH v3 2/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v3 1/2] dt: add cap11xx LED documentation
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v3 2/2] cap11xx: add LED support
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt: add cap11xx LED documentation
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- [PATCH] input: zforce_ts: add DT support for reset GPIO polarity
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- RE: [PATCH 2/7] input: cyapa: add gen6 device module support in driver
- From: Dudley Du <dudl@xxxxxxxxxxx>
- RE: [PATCH 6/7] input: cyapa: add of match device support and description document
- From: Dudley Du <dudl@xxxxxxxxxxx>
- RE: [PATCH 5/7] input: cyapa: add proximity and interrupt sysfs interfaces support
- From: Dudley Du <dudl@xxxxxxxxxxx>
- Re: [RFC] HID: hid-sony: Add basic iio-subsystem reading of SixAxis Accelerometers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC] HID: hid-sony: Add basic iio-subsystem reading of SixAxis Accelerometers
- From: simon@xxxxxxxxxxxxx
- [PATCH] Add driver for CJTouch touchscreen
- Re: [RFC] HID: hid-sony: Add basic iio-subsystem reading of SixAxis Accelerometers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] input: axp20x-pek: Fix reporting button state as inverted
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v7 5/8] iio: adc: fsl,imx25-gcq driver
- From: Hartmut Knaack <knaack.h@xxxxxx>
- Re: [PATCH v7 4/8] mfd: fsl imx25 Touchscreen ADC driver
- From: Hartmut Knaack <knaack.h@xxxxxx>
- Re: [PATCH v3 5/5] i8042: Add i8042_dt.h glue for DT support
- From: Roman Volkov <rvolkov@xxxxxxxxx>
- [PATCH v2] HID: support i2c write-read and large transfers in hid-cp2112
- From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v5] Fix the resolution issue in ChromeOS
- From: "Hn Chen" <hn.chen@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/7] input: cyapa: add gen6 device module support in driver
- From: Jeremiah Mahler <jmmahler@xxxxxxxxx>
- [PATCH v6] Input: add a driver for wdt87xx touchscreen controller
- From: HungNien Chen <hn.chen@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/7] input: cyapa: change strings of gen5 to pip in the name when they are shared
- From: Jeremiah Mahler <jmmahler@xxxxxxxxx>
- [PATCH v3 2/2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v3 1/2] dt: add cap11xx LED documentation
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v3 0/2] cap11xx: Add LED support to driver
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH 6/7] input: cyapa: add of match device support and description document
- From: Jeremiah Mahler <jmmahler@xxxxxxxxx>
- [PATCH v2 10/17] input/joystick/analog: Switch from rdtscl() to native_read_tsc()
- From: Andy Lutomirski <luto@xxxxxxxxxx>
- [PATCH v2 11/17] drivers/input/gameport: Replace rdtscl() with native_read_tsc()
- From: Andy Lutomirski <luto@xxxxxxxxxx>
- [PATCH 11/17] drivers/input/gameport: Replace rdtscl() with native_read_tsc()
- From: Andy Lutomirski <luto@xxxxxxxxxx>
- [PATCH 10/17] input/joystick/analog: Switch from rdtscl() to native_read_tsc()
- From: Andy Lutomirski <luto@xxxxxxxxxx>
- Re: [PATCH v3 4/5] input: synaptics - make image sensors and cr48 sensors report widths
- From: Gabriele Mazzotta <gabriele.mzt@xxxxxxxxx>
- Re: [RESEND PATCH v2 1/2] HID: hid-plantronics: Update to map volume up/down controls
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH 1/4] HID: hid-sony: Add quirk for MOTION_CONTROLLER_BT
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH 5/7] input: cyapa: add proximity and interrupt sysfs interfaces support
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v5] Fix the resolution issue in ChromeOS
- From: Frans Klaver <fransklaver@xxxxxxxxx>
- Re: [PATCH v3 5/5] input: MT - add ABS_TOOL_WIDTH to the legacy pointer emulation
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v5] Fix the resolution issue in ChromeOS
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v3 4/5] input: synaptics - make image sensors and cr48 sensors report widths
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2] Input: Add generic driver for Zeitec touchscreens
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2] cap11xx: add LED support
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH 7/7] input: cyapa: add CYAP0002 Gen6 device for ACPI configuration
- From: Dudley Du <dudl@xxxxxxxxxxx>
- [PATCH 6/7] input: cyapa: add of match device support and description document
- From: Dudley Du <dudl@xxxxxxxxxxx>
- [PATCH 0/7] instruction of cyapa gen6 and proximity patches
- From: Dudley Du <dudl@xxxxxxxxxxx>
- [PATCH 5/7] input: cyapa: add proximity and interrupt sysfs interfaces support
- From: Dudley Du <dudl@xxxxxxxxxxx>
- [PATCH 1/7] input: cyapa: change strings of gen5 to pip in the name when they are shared
- From: Dudley Du <dudl@xxxxxxxxxxx>
- [PATCH 4/7] input: cyapa: fully support runtime suspend power management
- From: Dudley Du <dudl@xxxxxxxxxxx>
- [PATCH 2/7] input: cyapa: add gen6 device module support in driver
- From: Dudley Du <dudl@xxxxxxxxxxx>
- [PATCH 3/7] input: cyapa: add proximity function support for gen5 and gen6 modules
- From: Dudley Du <dudl@xxxxxxxxxxx>
- Re: [rtc-linux] RE: [PATCH V3 1/4] mfd: da9062: DA9062 MFD core driver
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1 linux-next] Input: cyttsp4 - use swap() in cyttsp4_get_touch()
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] Input: elan_i2c - enable ELAN0600 acpi panels
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- Re: [PATCH] Input - elan_i2c: support multi ic type and iap format
- From: "'Dmitry Torokhov'" <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH 2/2] Input - synaptics: pin 3 touches when the firmware reports 3 fingers
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- Re: Bug#514464: caps lock led does not show up
- From: Samuel Thibault <sthibault@xxxxxxxxxx>
- Re: [RFC] HID: hid-sony: Add basic iio-subsystem reading of SixAxis Accelerometers
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- [RFC] HID: hid-sony: Add basic iio-subsystem reading of SixAxis Accelerometers
- From: Simon Wood <simon@xxxxxxxxxxxxx>
- Re: Bug#514464: caps lock led does not show up
- From: Samuel Thibault <sthibault@xxxxxxxxxx>
- RE: [PATCH V3 1/4] mfd: da9062: DA9062 MFD core driver
- From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
- Re: [PATCH V3 1/4] mfd: da9062: DA9062 MFD core driver
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH V3 1/4] mfd: da9062: DA9062 MFD core driver
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- RE: [PATCH V3 1/4] mfd: da9062: DA9062 MFD core driver
- From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
- Re: Bug#514464: caps lock led does not show up
- From: Samuel Thibault <sthibault@xxxxxxxxxx>
- Re: [PATCH v2] cap11xx: add LED support
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [PATCH v0] gpio_keys: fix gpio key driver to proper support GIC interrupt
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH 1/1 linux-next] HID: use swap() in cp_report_fixup()
- From: Fabian Frederick <fabf@xxxxxxxxx>
- [PATCH 1/1 linux-next] Input: cyttsp4 - use swap() in cyttsp4_get_touch()
- From: Fabian Frederick <fabf@xxxxxxxxx>
- Re: [PATCH] Input: goodix - do not explicitly set evbits in input device
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- RE: [PATCH v5] Fix the resolution issue in ChromeOS
- From: "Hn Chen" <hn.chen@xxxxxxxxxxxxxxx>
- RE: [PATCH v5] Fix the resolution issue in ChromeOS
- From: "Hn Chen" <hn.chen@xxxxxxxxxxxxxxx>
- Re: [PATCH] Input: goodix - do not explicitly set evbits in input device
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- Re: [PATCH] Input: goodix - do not explicitly set evbits in input device
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- RE: [PATCH] Input: ads7846 - correct the value get from SPI
- From: Chen Bough <Haibo.Chen@xxxxxxxxxxxxx>
- RE: [PATCH] Input - elan_i2c: support multi ic type and iap format
- From: "DusonLin" <dusonlin@xxxxxxxxxx>
- Re: [PATCH v2] cap11xx: add LED support
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- [PATCH v2] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH 1/3] Input: export LEDs as class devices in sysfs
- From: Pavel Machek <pavel@xxxxxx>
- [PATCH 3/4] HID: hid-sony: PS3 Move enable LEDs and Rumble via BT
- From: Simon Wood <simon@xxxxxxxxxxxxx>
- [PATCH 4/4] HID: hid-sony: PS Move fix report descriptor
- From: Simon Wood <simon@xxxxxxxxxxxxx>
- [PATCH 2/4] HID_ hid-sony_ Add support PS3 Move Battery via BT
- From: Simon Wood <simon@xxxxxxxxxxxxx>
- [PATCH 1/4] HID: hid-sony: Add quirk for MOTION_CONTROLLER_BT
- From: Simon Wood <simon@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
- From: Samuel Thibault <samuel.thibault@xxxxxxxxxxxx>
- [PATCH v2 2/2] Input: xpad: re-send LED command on present event
- From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
- [PATCH v2 1/2] Input: xpad: set the LEDs properly on XBox Wireless controllers
- From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
- [PATCH v2 0/2] Input: xpad: fix 360 wireless controller blinking LEDs
- From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
- Re: [PATCH] cap11xx: add LED support
- From: Daniel Mack <daniel@xxxxxxxxxx>
- Re: [PATCH] USB: HID: Fix fields from pen report ID being interpreted for multitouch.
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
- [PATCH] USB: HID: Fix fields from pen report ID being interpreted for multitouch.
- From: Brent Adam <brentadamdev@xxxxxxxxx>
- [PATCH] Input: goodix - do not explicitly set evbits in input device
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [git pull] Input updates for 4.1-rc7
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2 0/8] Goodix touchscreen enhancements
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2 6/8] input: goodix: add power management support
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2 5/8] input: goodix: write configuration data to device
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2 4/8] input: goodix: reset device at init
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 1/3] Input: export LEDs as class devices in sysfs
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH 1/3] Input: export LEDs as class devices in sysfs
- From: Samuel Thibault <samuel.thibault@xxxxxxxxxxxx>
- Re: [PATCH 1/3] Input: export LEDs as class devices in sysfs
- From: Samuel Thibault <samuel.thibault@xxxxxxxxxxxx>
- Re: [PATCH] cap11xx: add LED support
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: Handling Controllers with Acc/Gyro/Mag via HID system
- From: simon@xxxxxxxxxxxxx
- Re: [PATCH 1/3] Input: export LEDs as class devices in sysfs
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 1/3] Input: export LEDs as class devices in sysfs
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: Bug#514464: caps lock led does not show up
- From: Anton Zinoviev <anton@xxxxxxxxxx>
- Re: [PATCH] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH v2 4/8] input: goodix: reset device at init
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- Re: [PATCH v2 3/8] input: goodix: export id and version read from device
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- Re: [PATCH v2 2/8] input: goodix: fix variable length array warning
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- Re: [PATCH v2 4/8] input: goodix: reset device at init
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- Re: caps lock led does not show up
- From: Samuel Thibault <samuel.thibault@xxxxxxxxxxxx>
- Re: [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Samuel Thibault <samuel.thibault@xxxxxxxxxxxx>
- Re: [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Samuel Thibault <samuel.thibault@xxxxxxxxxxxx>
- Re: [PATCH 1/3] Input: export LEDs as class devices in sysfs
- From: Samuel Thibault <samuel.thibault@xxxxxxxxxxxx>
- Re: [PATCH 1/3] Input: export LEDs as class devices in sysfs
- From: Samuel Thibault <samuel.thibault@xxxxxxxxxxxx>
- Re: [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Samuel Thibault <samuel.thibault@xxxxxxxxxxxx>
- Re: [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Samuel Thibault <samuel.thibault@xxxxxxxxxxxx>
- Re: [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH v3 0/5] input: synaptics - report correct width and pressure values
- From: Gabriele Mazzotta <gabriele.mzt@xxxxxxxxx>
- Re: Handling Controllers with Acc/Gyro/Mag via HID system
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- Problem: Touchscreen (SP3) stops sending events
- From: Daniel Martin <consume.noise@xxxxxxxxx>
- Re: [PATCH] hid: Add secondary vendor id for the marco, USB_DEVICE_ID_MS_TYPE_COVER_3_V2
- From: Daniel Martin <consume.noise@xxxxxxxxx>
- RE: [RESEND PATCH V4 3/3] mfd: da9063: MFD support for OnKey driver
- From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
- Re: [RESEND PATCH V4 3/3] mfd: da9063: MFD support for OnKey driver
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] cap11xx: add LED support
- From: Daniel Mack <daniel@xxxxxxxxxx>
- Re: [PATCH] cap11xx: add LED support
- From: Daniel Mack <daniel@xxxxxxxxxx>
- [PATCH] cap11xx: add LED support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: Handling Controllers with Acc/Gyro/Mag via HID system
- From: simon@xxxxxxxxxxxxx
- [PATCH 2/2] Input: bcm5974 - report ABS_MT_PRESSURE + remove redundant emulation code
- From: Matt Whitlock <linux@xxxxxxxxxxxxxxxxx>
- [PATCH 1/2] Input: input_mt_report_pointer_emulation(), rescale pressure + tool width
- From: Matt Whitlock <linux@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] input: elan_i2c - Add product IDs FW names
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] Input - elan_i2c: support multi ic type and iap format
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [RESEND PATCH V4 3/3] mfd: da9063: MFD support for OnKey driver
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- Re: Handling Controllers with Acc/Gyro/Mag via HID system
- From: Frank Praznik <frank.praznik@xxxxxxxxx>
- [PATCH 2/3] tty/vt/keyboard: define LED triggers for VT LED states
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH 3/3] tty/vt/keyboard: define LED triggers for VT keyboard lock states
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH 1/3] Input: export LEDs as class devices in sysfs
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH 0/3] Switch input leds over to standard LED class devices
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [RESEND PATCH v2 1/2] HID: hid-plantronics: Update to map volume up/down controls
- From: Terry Junge <terry.junge@xxxxxxxxxxxxxxx>
- Re: [PATCH 0/5] HID: wacom: Support tablets with pen and touch on same interface
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH 0/5] HID: wacom: Support tablets with pen and touch on same interface
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- Re: [PATCH] Input: synaptics - add min/max quirk for Lenovo S540
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 0/5] HID: wacom: Support tablets with pen and touch on same interface
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- Re: [PATCH 0/5] HID: wacom: Support tablets with pen and touch on same interface
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- Handling Controllers with Acc/Gyro/Mag via HID system
- From: simon@xxxxxxxxxxxxx
- Re: [PATCH v4 00/18] new MFD LoCoMo driver set
- From: "Jingoo Han" <jingoohan1@xxxxxxxxx>
- [PATCH v2 6/8] input: goodix: add power management support
- From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
- [PATCH v2 5/8] input: goodix: write configuration data to device
- From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
- [PATCH v2 1/8] input: goodix: fix alignment issues
- From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
- [PATCH v2 3/8] input: goodix: export id and version read from device
- From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
- [PATCH v2 4/8] input: goodix: reset device at init
- From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
- [PATCH v2 7/8] input: goodix: use goodix_i2c_write_u8 instead of i2c_master_send
- From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
- [PATCH v2 8/8] input: goodix: add support for ESD
- From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
- [PATCH v2 2/8] input: goodix: fix variable length array warning
- From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
- [PATCH v2 0/8] Goodix touchscreen enhancements
- From: Irina Tirdea <irina.tirdea@xxxxxxxxx>
- RE: [PATCH 8/9] input: goodix: add support for ESD
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- RE: [RESEND PATCH V4 1/1] input: misc: da9063: OnKey driver
- From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
- Re: [PATCH] input: adding Surface Power Cover
- From: Raimund Roth <raimundmroth@xxxxxxxxxxxxxx>
- Re: [PATCH] input: adding Surface Power Cover
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH v0] gpio_keys: fix gpio key driver to proper support GIC interrupt
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v5] Fix the resolution issue in ChromeOS
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v0] gpio_keys: fix gpio key driver to proper support GIC interrupt
- [PATCH] usbtouchscreen: adds support for inverting X or Y axis (or both)
- From: Philippe Coval <rzr@xxxxxxx>
- Re: [PATCH 0/2] Input: xpad: fix wireless controller LEDs this picks up the work of "[PATCH 0/7] Input: xpad: Fix wireless controller connection and leds" and updates the patches as discussed in the thread, while leaving the conroversal parts out. Only the constantly blinking LED on the Xbox360 Wireless controller is fixed. So hopefully there is a better chance to merge this one. This also obsoletes my first attempt at this: "[PATCH] Xbox 360 wireless controller light continues blinking after sync with receiver."
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Synaptics Forcepad Support Kernel 4.1-rc6
- From: doa379 <doa379@xxxxxxxxx>
- [PATCH 2/2] Input: xpad: re-send led command for xbox360 wireless after controller becomes present. move led_no to xpad struct to this end.
- From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
- [PATCH 1/2] Input: xpad: Add the logic to set the LEDs on XBox Wireless controllers. Command sequence found by sniffing the Windows data stream when plugging the device in.
- From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
- [PATCH 0/2] Input: xpad: fix wireless controller LEDs this picks up the work of "[PATCH 0/7] Input: xpad: Fix wireless controller connection and leds" and updates the patches as discussed in the thread, while leaving the conroversal parts out. Only the constantly blinking LED on the Xbox360 Wireless controller is fixed. So hopefully there is a better chance to merge this one. This also obsoletes my first attempt at this: "[PATCH] Xbox 360 wireless controller light continues blinking after sync with receiver."
- From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
- Re: usbtouchscreen: version 0.4
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- [PATCH] MAINTAINERS: input: mt: remove non existent git tree
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: usbtouchscreen: version 0.4
- From: Daniel Ritz <daniel.ritz-ml@xxxxxxxxxxxxxx>
- [PATCH] input: adding Surface Power Cover
- From: Raimund Roth <raimundmroth@xxxxxxxxxxxxxx>
- [PATCH] Input - elan_i2c: support multi ic type and iap format
- From: duson <dusonlin@xxxxxxxxxx>
- re: usbtouchscreen: version 0.4
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH] Input: synaptics - switch ForcePad detection to PNP IDs
- From: doa379 <doa379@xxxxxxxxx>
- Re: [PATCH] input: elan_i2c - Add product IDs FW names
- From: duson <dusonlin@xxxxxxxxxx>
- [git pull] Input updates for 4.1-rc6
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [RESEND PATCH V4 1/1] input: misc: da9063: OnKey driver
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- RE: [PATCH 2/9] input: goodix: fix variable length array warning
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- Re: [PATCH 1/9] input: goodix: fix alignment issues
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 1/9] input: goodix: fix alignment issues
- From: Joe Perches <joe@xxxxxxxxxxx>
- Re: [PATCH 2/9] input: goodix: fix variable length array warning
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- RE: [PATCH 1/9] input: goodix: fix alignment issues
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- RE: [PATCH 6/9] input: goodix: write configuration data to device
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- RE: [PATCH 4/9] input: goodix: add ACPI IDs for GT911 and GT9271
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- RE: [PATCH 2/9] input: goodix: fix variable length array warning
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- Re: [PATCH 1/9] input: goodix: fix alignment issues
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 8/9] input: goodix: add support for ESD
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 6/9] input: goodix: write configuration data to device
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- RE: [PATCH 7/9] input: goodix: add power management support
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- Re: [PATCH 4/9] input: goodix: add ACPI IDs for GT911 and GT9271
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 2/9] input: goodix: fix variable length array warning
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- RE: [PATCH 8/9] input: goodix: add support for ESD
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- RE: [PATCH 6/9] input: goodix: write configuration data to device
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- RE: [PATCH 0/9] Goodix touchscreen enhancements
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- RE: [PATCH 4/9] input: goodix: add ACPI IDs for GT911 and GT9271
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- RE: [PATCH 2/9] input: goodix: fix variable length array warning
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- [PATCH] input: elan_i2c - Add product IDs FW names
- From: Charlie Mooney <charliemooney@xxxxxxxxxxxx>
- [PATCH] Xbox 360 wireless controller light continues blinking after sync with receiver.
- From: Pavel Rojtberg <rojtberg@xxxxxxxxx>
- Re: [PATCH v0] gpio_keys: fix gpio key driver to proper support GIC interrupt
- From: Arnd Bergmann <arnd@xxxxxxxx>
- RE: [PATCH] CHROMIUM: elants_i2c: Solved previous issue on 3.10 and 3.14.
- From: "James.Chen" <james.chen@xxxxxxxxxx>
- Re: [PATCH] CHROMIUM: elants_i2c: Solved previous issue on 3.10 and 3.14.
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2] alps: Do not divide trackpoint deltas reported by hardware by 2 for v7 devices
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] Input: Elantech- add new icbody type
- From: "'Dmitry Torokhov'" <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v0] gpio_keys: fix gpio key driver to proper support GIC interrupt
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v0] gpio_keys: fix gpio key driver to proper support GIC interrupt
- From: Feng Kan <fkan@xxxxxxx>
- Re: [PATCH 2/5] HID: wacom: Treat features->device_type values as flags
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- Re: [PATCH 5/5] HID: wacom: Introduce new 'touch_input' device
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- Re: [PATCH 2/5] HID: wacom: Treat features->device_type values as flags
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- Re: [PATCH 5/5] HID: wacom: Introduce new 'touch_input' device
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- Re: [PATCH 0/5] HID: wacom: Support tablets with pen and touch on same interface
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- Re: [PATCH v0] gpio_keys: fix gpio key driver to proper support GIC interrupt
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 0/5] HID: wacom: Support tablets with pen and touch on same interface
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- Re: [PATCH v2] alps: Do not divide trackpoint deltas reported by hardware by 2 for v7 devices
- From: Benjamin Tissoires <btissoir@xxxxxxxxxx>
- Re: [PATCH 0/9] Goodix touchscreen enhancements
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- Re: [PATCH 7/9] input: goodix: add power management support
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- Re: [PATCH 8/9] input: goodix: add support for ESD
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- Re: [PATCH 6/9] input: goodix: write configuration data to device
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- Re: [PATCH 4/9] input: goodix: add ACPI IDs for GT911 and GT9271
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- Re: [PATCH 1/9] input: goodix: fix alignment issues
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- [PATCH v2] alps: Do not divide trackpoint deltas reported by hardware by 2 for v7 devices
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH] alps: Do not divide trackpoint deltas reported by hardware by 2 for v7 devices
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [RESEND PATCH V4 0/1] Add OnKey support for DA9063
- From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
- [RESEND PATCH V4 1/1] input: misc: da9063: OnKey driver
- From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
- Re: [PATCH] HID: hid-sony: Support PS3 Move Controller when connected via Bluetooth
- From: Jiri Kosina <jkosina@xxxxxxx>
- [PATCH v0] gpio_keys: fix gpio key driver to proper support GIC interrupt
- [PATCH 5/5] HID: wacom: Introduce new 'touch_input' device
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- [PATCH 4/5] HID: wacom: Split apart 'wacom_setup_pentouch_input_capabilites'
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- [PATCH 3/5] HID: wacom: Introduce a new WACOM_DEVICETYPE_PAD device_type
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- [PATCH 2/5] HID: wacom: Treat features->device_type values as flags
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- [PATCH 1/5] HID: wacom: Simplify 'wacom_update_name'
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- [PATCH 0/5] HID: wacom: Support tablets with pen and touch on same interface
- From: Jason Gerecke <killertofu@xxxxxxxxx>
- Re: [PATCH 2/9] input: goodix: fix variable length array warning
- From: Antonio Ospite <ao2@xxxxxx>
- Re: [PATCH] Input: Elantech- add new icbody type
- From: ulrik.debie-os@xxxxxxxxx
- Re: [PATCH v2 3/6] hid: sony: Add support for the Sony Motion Controller
- From: simon@xxxxxxxxxxxxx
- [PATCH] HID: hid-sony: Support PS3 Move Controller when connected via Bluetooth
- From: Simon Wood <simon@xxxxxxxxxxxxx>
- Re: [PATCH] Input: bcm5974 - report highest finger pressure to Synaptics
- From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
- Re: [PATCH] Input: bcm5974 - report highest finger pressure to Synaptics
- From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
- Re: [PATCH] Input: bcm5974 - report highest finger pressure to Synaptics
- From: Matt Whitlock <linux@xxxxxxxxxxxxxxxxx>
- [PATCH] Input: bcm5974 - report highest finger pressure to Synaptics
- From: Matt Whitlock <linux@xxxxxxxxxxxxxxxxx>
- RE: [PATCH 2/9] input: goodix: fix variable length array warning
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- Re: [PATCH] HID: i2c-hid: Do not set the ACPI companion field in the HID device
- From: Jiri Kosina <jkosina@xxxxxxx>
- [PATCH] Input: Elantech- add new icbody type
- From: 洪一竹 <sam.hung@xxxxxxxxxx>
- [RESEND PATCH V4 1/3] input: misc: da9063: OnKey driver
- From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
- [PATCH] CHROMIUM: elants_i2c: Solved previous issue on 3.10 and 3.14.
- From: "james.chen" <james.chen@xxxxxxxxxx>
- Re: [PATCH] HID: i2c-hid: Do not set the ACPI companion field in the HID device
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH] HID: i2c-hid: Do not set the ACPI companion field in the HID device
- From: Benson Leung <bleung@xxxxxxxxxxxx>
- [PATCH] HID: i2c-hid: Do not set the ACPI companion field in the HID device
- From: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
- Re: [PATCH v2] elantech: Fix detection of touchpads where the revision matches a known rate
- From: ulrik.debie-os@xxxxxxxxx
- Re: [PATCH v2] elantech: Fix detection of touchpads where the revision matches a known rate
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 2/2] Add driver for mouse logitech M560
- From: Goffredo Baroncelli <kreijack@xxxxxxxxx>
- Re: [PATCH v4 01/18] mfd: add new driver for Sharp LoCoMo
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2] Input: pixcir_i2c_ts - Add RESET gpio
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2] elantech: Fix detection of touchpads where the revision matches a known rate
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2] Input: Add generic driver for Zeitec touchscreens
- From: Bogdan George Stefan <bogdan.george.stefan@xxxxxxxxx>
- [no subject]
- From: Carlo Abelli <carlo.abelli@xxxxxxxxx>
- Re: PROBLEM: [Asus Zenbook Pro UX501JW] Backlight control via hotkeys does not work
- From: Martin Herkt <lachs0r@xxxxxxxxxxx>
- PROBLEM: [Asus Zenbook Pro UX501JW] Backlight control via hotkeys does not work
- From: Philip Tibom <philiptibom@xxxxxxxxx>
- Re: [rtc-linux] [PATCH v5 1/6] rtc: arm: imx: snvs: change use syscon to access register
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 0/6] Change snvs rtc and poweroff to use syscon add pwrkey driver
- From: Zhi Li <lznuaa@xxxxxxxxx>
- Re: [PATCH v5 0/6] Change snvs rtc and poweroff to use syscon add pwrkey driver
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v5 4/6] input: keyboard: imx: add snvs power key driver
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v5] Fix the resolution issue in ChromeOS
- From: Frans Klaver <fransklaver@xxxxxxxxx>
- [PATCH] Input: edt-ft5x06 - mark as direct input device
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] Input: stmpe-ts - enforce device tree only mode
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- RE: [RESEND PATCH V4 1/3] input: misc: da9063: OnKey driver
- From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
- SNVS power key patch
- From: Zhi Li <lznuaa@xxxxxxxxx>
- Re: [hid:for-next 63/64] drivers/hid/hid-logitech-hidpp.c:1504:46: error: 'HIDPP_QUIRK_MULTI_INPUT' undeclared here (not in a function)
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH 1/1] usb: Remove Vernier devices from lsusb and hid_ignore_list
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH 2/2] Add driver for mouse logitech M560
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH v2] psmouse - focaltech report finger width to userspace
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH 1/1] usb: Remove Vernier devices from lsusb and hid_ignore_list
- From: "Dennis O'Brien" <dennis.obrien@xxxxxxxxxx>
- Re: [PATCH v3 1/5] i8042: intel-8042 DT documentation
- From: Roman Volkov <rvolkov@xxxxxxxxx>
- Re:
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re:
- From: Roman Volkov <rvolkov@xxxxxxxxx>
- [PATCH v2] psmouse - focaltech report finger width to userspace
- From: Dmitry Tunin <hanipouspilot@xxxxxxxxx>
- Re: [PATCH] psmouse - focaltech report finger width to userspace
- From: Dmitry Tunin <hanipouspilot@xxxxxxxxx>
- [PATCH 2/2] Add driver for mouse logitech M560
- From: Goffredo Baroncelli <kreijack@xxxxxxxxx>
- [PATCH V6] Add support for mouse logitech m560
- From: Goffredo Baroncelli <kreijack@xxxxxxxxx>
- [PATCH 1/2] Export hid_field_extract()
- From: Goffredo Baroncelli <kreijack@xxxxxxxxx>
- Re: [PATCH] Input: of_touchscreen - remove interdependence of max/fuzz values
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH] psmouse - focaltech report finger width to userspace
- From: Dmitry Tunin <hanipouspilot@xxxxxxxxx>
- Re: [PATCH v1] HID: support multiple and large i2c transfers in hid-cp2112
- From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1] HID: support multiple and large i2c transfers in hid-cp2112
- From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
- Re: [PATCH v1] HID: support multiple and large i2c transfers in hid-cp2112
- From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1] HID: support multiple and large i2c transfers in hid-cp2112
- From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
- [PATCH] Input: of_touchscreen - remove interdependence of max/fuzz values
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH v2] Input: Add generic driver for Zeitec touchscreens
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] psmouse - focaltech report finger width to userspace
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH] psmouse - focaltech report finger width to userspace
- From: Dmitry Tunin <hanipouspilot@xxxxxxxxx>
- Re: [PATCH v1] HID: support multiple and large i2c transfers in hid-cp2112
- From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Add driver for mouse logitech M560
- From: Goffredo Baroncelli <kreijack@xxxxxxxxx>
- Re: [PATCH v1] HID: support multiple and large i2c transfers in hid-cp2112
- From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
- Re: [PATCH v1] HID: support multiple and large i2c transfers in hid-cp2112
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH] Add driver for mouse logitech M560
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH] Add driver for mouse logitech M560
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
- Re: [PATCH] Add driver for mouse logitech M560
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH] HID: lenovo: Remove sysfs group on failure path
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH v2 7/9] mfd/extcon: max77843: Rename defines to allow inclusion with max77693
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [PATCH 1/1] usb: Remove Vernier devices from lsusb and hid_ignore_list
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH v5] Fix the resolution issue in ChromeOS
- From: Frans Klaver <fransklaver@xxxxxxxxx>
- [PATCH v5] Fix the resolution issue in ChromeOS
- From: HungNien Chen <hn.chen@xxxxxxxxxxxxxxx>
- [PATCH] HID: lenovo: Remove sysfs group on failure path
- From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
- Re: [PATCH v4 01/18] mfd: add new driver for Sharp LoCoMo
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
- Re: [PATCH] elantech: Fix detection of touchpads where the revision matches a known rate
- From: ulrik.debie-os@xxxxxxxxx
- Re: [PATCH] input: elantech.c: add more exceptions to fw version signature check
- From: Martin Herkt <lachs0r@xxxxxxxxxxx>
- [PATCH] input: elantech.c: add more exceptions to fw version signature check
- From: Martin Herkt <lachs0r@xxxxxxxxxxx>
- Re: [PATCH] input: elantech.c: add more exceptions to fw version signature check
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 1/1] usb: Remove Vernier devices from lsusb and hid_ignore_list
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/9] input: goodix: fix variable length array warning
- From: Antonio Ospite <ao2@xxxxxx>
- Re: [PATCH 1/1] usb: Remove Vernier devices from lsusb and hid_ignore_list
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: PROBLEM: Touchpad works just like a mouse
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: PROBLEM: Touchpad works just like a mouse
- From: David Zafra Gómez <dezeta@xxxxxx>
- RE: [PATCH 8/9] input: goodix: add support for ESD
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- RE: [PATCH 6/9] input: goodix: write configuration data to device
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- RE: [PATCH 5/9] input: goodix: reset device at init
- From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
- [PATCH V4 3/3] devicetree: da9062: Add bindings for DA9062 driver
- From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
- [PATCH V4 2/3] watchdog: da9062: DA9062 watchdog driver
- From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
- [PATCH V4 1/3] mfd: da9062: DA9062 MFD core driver
- From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Linux SCSI]
[Samba]
[Yosemite News]